TOP DRILL™ Modular X • Inserti • MS

Name: TOP DRILL™ Modular X • Inserti • MS
SKU: 6569533
Rating: 0 (0 reviews)

TDMX • Inserti • MS

Metric

Inch

Codice materiale SAP	6569533
Codice catalogo ISO	TDMX33338MSM
Codice catalogo ANSI	TDMX13125MS
Qualità	WM15PD
[D1] Diametro punta	33.338 mm
[D1] Diametro punta	1.312 in
[L5] Lunghezza punta	5.86 mm
[L5] Lunghezza punta	.2307 in
[SSC] Dimensione della sede dell’inserto	Q

Visualizzare tutte le varianti del prodotto

Uses and application

Drilling
Drilling: Inclined Entry
Drilling: Inclined Exit
Drilling: Stacked Plates
Dimensioni utensile: 2vani/2margini/refrigerante
Drilling: Cross-Hole Drilling

Materiale da lavorare

M Acciai inossidabili

K Ghisa

N Materiali non ferrosi

S Leghe resistenti al calore

Features and benefits

Geometria progettata per applicazioni in acciaio inossidabile e superleghe

Applicazione secondaria su acciaio e ghisa in condizioni stabili

Aree a due margini

Lato macchina

Lato pezzo

Metric
tolerance
Insert Type	TDMX….PK; MS; FP	TDMX…FPE
D1	Tolerance k7	Tolerance s7
16-18	.+0,001/+0.019	.+0.028/+0.046
>18-30	.+0,002/+0,023	.+0,035/+0,056
>30-40	.+0,002/+0,027	.+0,043/+0,068

Inch
tolerance
Insert Type	TDMX….PK

Parametri di taglio • MS(M) • WM15PD • Sistema metrico

Material Group		<="" td="">			<="" td="" />
		Cutting Speed Vc
		Range m/min			Recommended Feed Rate (f) by Diameter
–	–	Min	Starting Value	Max	Tool Diameter (mm)	16,0	20,0	25,0	32,0	40,0
M	1	40	80	110	mm/r	0,11 – 0,26	0,13 – 0,28	0,13 – 0,32	0,14 – 0,35	0,15 – 0,37
	2	35	55	75	mm/r	0,11 – 0,26	0,13 – 0,28	0,13 – 0,32	0,14 – 0,35	0,15 – 0,37
	3	20	35	50	mm/r	0,11 – 0,26	0,13 – 0,28	0,13 – 0,32	0,14 – 0,35	0,15 – 0,37
K	1	90	135	175	mm/r	0,19 – 0,25	0,22 – 0,29	0,29 – 0,38	0,32 – 0,43	0,33 – 0,50
	2	80	120	140	mm/r	0,19 – 0,25	0,22 – 0,29	0,29 – 0,38	0,32 – 0,43	0,33 – 0,50
	3	70	110	125	mm/r	0,18 – 0,26	0,21 – 0,29	0,23 – 0,37	0,25 – 0,42	0,27 – 0,46
N	1	90	155	220	mm/r	0,25 – 0,50	0,28 – 0,56	0,32 – 0,63	0,32 – 0,70	0,32 – 0,70
	2	90	155	220	mm/r	0,25 – 0,50	0,28 – 0,56	0,32 – 0,63	0,32 – 0,70	0,32 – 0,70
	3	80	120	160	mm/r	0,25 – 0,50	0,28 – 0,56	0,32 – 0,63	0,32 – 0,70	0,32 – 0,70
	4	90	155	220	mm/r	0,25 – 0,50	0,28 – 0,56	0,32 – 0,63	0,32 – 0,70	0,32 – 0,70
	5	160	200	240	mm/r	0,25 – 0,50	0,28 – 0,56	0,32 – 0,63	0,32 – 0,70	0,32 – 0,70
	6	160	200	240	mm/r	0,25 – 0,50	0,28 – 0,56	0,32 – 0,63	0,32 – 0,70	0,32 – 0,70
S	1	20	40	60	mm/r	0,07 – 0,12	0,09 – 0,14	0,11 – 0,17	0,13 – 0,20	0,16 – 0,25
	2	15	30	45	mm/r	0,07 – 0,12	0,09 – 0,14	0,11 – 0,17	0,13 – 0,20	0,16 – 0,25
	3	15	30	45	mm/r	0,07 – 0,12	0,09 – 0,14	0,11 – 0,17	0,13 – 0,20	0,16 – 0,25
	4	10	25	40	mm/r	0,07 – 0,12	0,13 – 0,20	0,16 – 0,25	0,18 – 0,28	0,21 – 0,31

Application Data • MS(M) • WM15PD • Inch

		<="" td="">			<="" td="" />
		Cutting Speed Vc
		Range SFM			Recommended Feed Rate (f) by Diameter
Material Group	–	Min	Starting Value	Max	Tool Diameter (inch)	0.630	0.787	1.000	1.260	1.575
M	1	131	262	361	IPR	.004 – .010	.005 – .012	.005 – .013	.006 – .014	.006 – .015
	2	115	180	246	IPR	.004 – .010	.005 – .012	.005 – .013	.006 – .014	.006 – .015
	3	66	115	164	IPR	.004 – .010	.005 – .012	.005 – .013	.006 – .014	.006 – .015
K	1	295	443	574	IPR	.007 – .010	.009 – .019	.011 – .015	.013 – .017	.013 – .020
	2	262	394	459	IPR	.007 – .010	.009 – .019	.011 – .015	.013 – .017	.013 – .020
	3	230	361	410	IPR	.007 – .010	.009 – .019	.009 – .015	.010 – .017	.011 – .020
N	1	295	508	722	IPR	.010 – .020	.011 – .022	.013 – .025	.013 – .028	.013 – .028
	2	295	508	722	IPR	.010 – .020	.011 – .022	.013 – .025	.013 – .028	.013 – .028
	3	262	394	525	IPR	.010 – .020	.011 – .022	.013 – .025	.013 – .028	.013 – .028
	4	295	508	722	IPR	.010 – .020	.011 – .022	.013 – .025	.013 – .028	.013 – .028
	5	525	656	787	IPR	.010 – .020	.011 – .022	.013 – .025	.013 – .028	.013 – .028
	6	525	656	787	IPR	.010 – .020	.011 – .022	.013 – .025	.013 – .028	.013 – .028
S	1	66	131	197	IPR	.003 – .005	.004 – .006	.004 – .007	.005 – .008	.006 – .010
	2	49	98	148	IPR	.003 – .005	.004 – .006	.004 – .007	.005 – .008	.006 – .010
	3	49	98	148	IPR	.003 – .005	.004 – .006	.004 – .007	.005 – .008	.006 – .010
	4	33	82	131	IPR	.003 – .005	.005 – .008	.006 – .010	.007 – .011	.008 – .012

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

SAP Material Number	ISO Catalogo	Grade

Benvenuto

Conferma le tue preferenze

Aggiorna preferenze

Suggerimenti sui prodotti

Product Family suggestions

Contatta il Team di vendita

Contatta il Team di vendita

Modifica della soluzione

Soluzione aggiunta