successfully added to cart
View Cart
COVID-19: La risposta di WIDIA

Bloccaggio di tipo D • Per inserti di tipo negativo

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (65)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (65)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (65)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (65)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (65)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (65)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (65)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (65)
  • M Stainless Steel (65)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (65)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (65)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (65)
  • K Cast Iron (65)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (65)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (65)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (65)
  • N Non-Ferrous Materials (63)
    • N1
      Wrought Aluminum
      (63)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (63)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (32)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (63)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (32)
    • N6
      Carbon, Graphite Composites, CFRP
      (32)
    • N7
      MMC's
      (32)
  • S High-Temp Alloys (65)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (65)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (65)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (65)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (63)
  • H Hardened Materials (50)
    • H1
      Hardened Materials 44-48 HRC
      (50)
    • H2
      Hardened Materials 48-55 HRC
      (50)
    • H3
      Hardened Materials 56-60 HRC
      (50)
    • H4
      Hardened Materials >60 HRC
      (50)
Select First Choice
  • DE (16)
Applications
  • Back Boring Back Boring (65)
  • Multiple Direction Cutting Multiple Direction Cutting (65)
  • Profiling Profiling (65)
  • TRN Boring TRN Boring (65)
Cutting Condition
  • Heavily Interrupted Cut (65)
  • Lightly Interrupted Cut (65)
  • Smooth Cut (65)
  • Varying Depth of Cut (65)
Tool Cutting Edge Angle
  • 62.5 (5)
  • 90.0 (4)
  • 93.0 (14)
  • 95.0 (38)
  • 107.5 (4)
to
Connection Style
  • Boring Bar Shank (65)
Cutting Edges Per Insert
  • 1.0 (46)
  • 2.0 (40)
  • 3.0 (4)
  • 4.0 (53)
  • 6.0 (12)
  • 8.0 (30)
to
cornerConfiguration
Corner Radius
  • 0.1 (22)
  • 0.102 (18)
  • 0.2 (31)
  • 0.34 (14)
  • 0.397 (40)
  • 0.4 (55)
  • 0.6 (6)
  • 0.794 (46)
  • 0.8 (65)
  • 1.191 (48)
  • 1.2 (63)
  • 1.588 (4)
  • 1.6 (52)
  • 2.4 (10)
to
Corner Radius
  • 0.004 (22)
  • 0.008 (31)
  • 0.013 (14)
  • 0.0156 (55)
  • 0.0312 (42)
  • 0.0313 (65)
  • 0.0315 (18)
  • 0.0469 (63)
  • 0.0472 (18)
  • 0.0625 (52)
  • 0.0938 (10)
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • CW2015 (50)
  • CW5025 (56)
  • HK1500 (48)
  • PB100 (18)
  • PB170 (18)
  • PB250 (18)
  • PB300 (18)
  • THM (26)
  • THM-X (32)
  • THMF-X (22)
  • TN10P (65)
  • TN10U (46)
  • TN15M (60)
  • TN15U (46)
  • TN2000 (48)
  • TN20K (58)
  • TN20P (65)
  • TN30M (65)
  • TN30P (52)
  • TN4000 (48)
  • TN5015 (57)
  • TN5020 (57)
  • TN5105 (47)
  • TN5120 (57)
  • TN6010 (36)
  • TN6025 (42)
  • TN7005 (45)
  • TN7010 (59)
  • TN7015 (59)
  • TN7025 (59)
  • TN7035 (52)
  • TN7105 (49)
  • TN7110 (57)
  • TN7115 (57)
  • TN7125 (57)
  • TN7135 (52)
  • TN8025 (59)
  • TTI15 (37)
  • TTM09 (4)
  • TTR (18)
  • TTS (40)
  • TTX (36)
  • WBH10C (36)
  • WBH10P (22)
  • WBH10U (26)
  • WBH20P (40)
  • WBH25P (26)
  • WBH25U (36)
  • WBH30P (22)
  • WBK40U (23)
  • WBK45U (36)
  • WDN00U (18)
  • WDN25U (32)
  • WK05CT (63)
  • WK15CT (44)
  • WK20CT (63)
  • WM15CT (63)
  • WM25CT (63)
  • WM35CT (63)
  • WP05CT (24)
  • WP15CT (63)
  • WP20TT (5)
  • WP25CT (63)
  • WP35CT (63)
  • WS10PT (63)
  • WS25PT (63)
  • WU10HT (63)
Hand Of Tool
  • L (32)
  • R (33)
Wiper Insert
  • N (65)
  • Y (36)
Minimum Axial Groove Diameter
  • 1.2 (4)
  • 1.26 (10)
  • 1.457 (1)
  • 1.47 (2)
  • 1.5748 (2)
  • 1.575 (12)
  • 1.76 (4)
  • 1.772 (2)
  • 1.9685 (2)
  • 1.969 (10)
  • 2.01 (2)
  • 2.047 (2)
  • 2.4 (6)
  • 2.48 (2)
  • 3.03 (4)
to
Minimum Axial Groove Diameter
  • 30.48 (4)
  • 32.0 (10)
  • 37.0 (1)
  • 37.34 (2)
  • 40.0 (14)
  • 44.7 (4)
  • 45.0 (2)
  • 50.0 (12)
  • 51.05 (2)
  • 52.0 (2)
  • 60.96 (6)
  • 63.0 (2)
  • 76.96 (4)
to
Cutting Direction
  • B (38)
  • E (27)
Rake Angle Style
  • DOUBLE NEGATIVE (60)
  • NEGATIVE-ZERO (5)
Maximum Bore Depth
  • 100.0 (11)
  • 101.6 (4)
  • 126.8 (1)
  • 127.0 (1)
  • 128.0 (16)
  • 152.4 (4)
  • 160.0 (14)
  • 177.8 (2)
  • 200.0 (2)
  • 203.2 (6)
  • 254.0 (4)
to
Maximum Bore Depth
  • 3.936 (11)
  • 4.0 (4)
  • 5.0 (2)
  • 5.04 (16)
  • 6.0 (4)
  • 6.28 (1)
  • 6.296 (1)
  • 6.3 (12)
  • 7.0 (2)
  • 7.876 (2)
  • 8.0 (6)
  • 10.0 (4)
to
Boring Bar Material
  • S (65)
frontEnd
Clamp Style
  • D (65)
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (30)
  • D-DIAMOND/RHOMBIC 55 (19)
  • T-TRIANGLE 60 (4)
  • V-DIAMOND/RHOMBIC 35 (4)
  • W-TRIGON 80 (8)
insertGeometry
Cutting Tool Material
  • B H (45)
  • B L (40)
  • C A (50)
  • C N (58)
  • D P (32)
  • H T (37)
  • H W (65)
backEnd
Connection Type
  • BORING BAR (65)
Back-End Diameter
  • 0.984 (11)
  • 1.0 (4)
  • 1.25 (2)
  • 1.26 (16)
  • 1.5 (4)
  • 1.57 (1)
  • 1.574 (1)
  • 1.575 (12)
  • 1.75 (2)
  • 1.969 (2)
  • 2.0 (6)
  • 2.5 (4)
to
Back-End Diameter
  • 25.0 (11)
  • 25.4 (4)
  • 31.7 (1)
  • 31.75 (1)
  • 32.0 (16)
  • 38.1 (4)
  • 40.0 (14)
  • 44.45 (2)
  • 50.0 (2)
  • 50.8 (6)
  • 63.5 (4)
to
other
Grade
  • WG (65)
Platform
  • D-Style Clamping (51)
Tool Unit
  • I (22)
  • M (43)
Over All Length [L]
  • 200.0 (10)
  • 200.01 (1)
  • 250.0 (16)
  • 300.0 (14)
  • 304.8 (4)
  • 350.0 (2)
  • 355.6 (8)
  • 406.4 (10)
to
Over All Length [L]
  • 7.874 (11)
  • 9.8425 (2)
  • 9.843 (14)
  • 11.811 (14)
  • 12.0 (4)
  • 13.78 (2)
  • 14.0 (8)
  • 16.0 (10)
to
Insert Hand
  • N (65)
obsoleteFacet
  • true (65)
  • false (46)
Cutting Condition Material
  • H-All (26)
  • K-All (63)
  • M-All (65)
  • N-All (51)
  • P-All (65)
  • S-All (63)
No filters matching ""
View Products in
Metric
Inch
Lavorazione interna • Bareni per inserti negativi

A-DCLN 95°
(8 Products)
  • I.D. Chamfering & ProfilingI.D. Chamfering & Profiling
  • 5236852368
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [CS] Coolant Supply Size Gage Insert Shim Screw ID Drive Size Clamp Screw ID Drive Size
5696072 A25RDCLNL12KC04 A25RDCLNL12KC04   WG 25.0 .984 32.0000 1.260 17.0000 .6690 200.0000 7.874 1/4-18 NPT CN.120408   15 IP
    5696071 A25RDCLNR12KC04 A25RDCLNR12KC04   WG 25.0 .984 32.0000 1.260 17.0000 .6690 200.0000 7.874 1/4-18 NPT CN.120408   15 IP
      5696074 A32SDCLNL12KC04 A32SDCLNL12KC04   WG 32.0 1.26 40.0000 1.575 22.0000 .8660 250.0000 9.843 1/4-18 NPT CN.120408 15 IP 15 IP
        5696073 A32SDCLNR12KC04 A32SDCLNR12KC04   WG 32.0 1.26 40.0000 1.575 22.0000 .8660 250.0000 9.843 1/4-18 NPT CN.120408 15 IP 15 IP
          5696076 A40TDCLNL12KC04 A40TDCLNL12KC04   WG 40.0 1.575 50.0000 1.969 27.0000 1.063 300.0000 11.811 1/4-18 NPT CN.120408 15 IP 15 IP
            5696078 A40TDCLNL16KC06 A40TDCLNL16KC06   WG 40.0 1.575 50.0000 1.969 27.0000 1.063 300.0000 11.811 1/4-18 NPT CN..160612 15 IP 15 IP
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Qty
              Lavorazione interna • Bareni per inserti negativi

              A-DTFN 90°
              (4 Products)
              • I.D. Chamfering & ProfilingI.D. Chamfering & Profiling
              • 5236852368
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [CS] Coolant Supply Size Gage Insert Shim Screw ID Drive Size Clamp Screw ID Drive Size
              5696260 A25RDTFNL16KC04 A25RDTFNL16KC04   WG 25.0 .984 32.0000 1.260 17.0000 .6690 200.0000 7.874 1/4-18 NPT TN..160408 15 IP 15 IP
                5696219 A25RDTFNR16KC04 A25RDTFNR16KC04   WG 25.0 .984 32.0000 1.260 17.0000 .6690 200.0000 7.874 1/4-18 NPT TN..160408 15 IP 15 IP
                  5696261 A32SDTFNR16KC04 A32SDTFNR16KC04   WG 32.0 1.26 40.0000 1.575 22.0000 .8660 250.0000 9.843 1/4-18 NPT TN..160408 15 IP 15 IP
                    5696262 A32SDTFNL16KC04 A32SDTFNL16KC04   WG 32.0 1.26 40.0000 1.575 22.0000 .8660 250.0000 9.843 1/4-18 NPT TN..160408 15 IP 15 IP
                      List price:
                      Discount: %
                      Your price::
                      Replacement This item is not available
                      Replacement Product This item may be available through a distributor
                      Qty
                      Lavorazione interna • Bareni per inserti negativi

                      A-DWLN 95°
                      (8 Products)
                      • I.D. Chamfering & ProfilingI.D. Chamfering & Profiling
                      • 5236852368
                      View Products
                      SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [CS] Coolant Supply Size Gage Insert Shim Screw ID Drive Size Clamp Screw ID Drive Size
                      5696268 A25RDWLNL06KC04 A25RDWLNL06KC04   WG 25.0 .984 32.0000 1.260 17.0000 .6690 200.0000 7.874 1/4-18 NPT WN..060408   15 IP
                        5696280 A25RDWLNL08KC04 A25RDWLNL08KC04   WG 25.0 .984 32.0000 1.260 17.0000 .6690 200.0000 7.874 1/4-18 NPT WN..080408   15 IP
                          5696269 A25RDWLNR08KC04 A25RDWLNR08KC04   WG 25.0 .984 32.0000 1.260 17.0000 .6690 200.0000 7.874 1/4-18 NPT WN..080408   15 IP
                            5696282 A32SDWLNL08KC04 A32SDWLNL08KC04   WG 32.0 1.26 40.0000 1.575 22.0000 .8660 250.0000 9.843 1/4-18 NPT WN..080408 15 IP 15 IP
                              5696281 A32SDWLNR08KC04 A32SDWLNR08KC04   WG 32.0 1.26 40.0000 1.575 22.0000 .8660 250.0000 9.843 1/4-18 NPT WN..080408 15 IP 15 IP
                                5696267 A25RDWLNR06KC04 A25RDWLNR06KC04   WG 25.0 .984 32.0000 1.260 17.0000 .6690 200.0100 7.874 1/4-18 NPT WN..060408   15 IP
                                  List price:
                                  Discount: %
                                  Your price::
                                  Replacement This item is not available
                                  Replacement Product This item may be available through a distributor
                                  Qty
                                  Lavorazione interna • Bareni per inserti negativi

                                  A-DDUN 93°
                                  (10 Products)
                                  • I.D. Chamfering & ProfilingI.D. Chamfering & Profiling
                                  • Back BoringBack Boring
                                  • 5236852368
                                  View Products
                                  SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [CS] Coolant Supply Size Gage Insert Shim Screw ID Drive Size Clamp Screw ID Drive Size
                                  5696214 A32SDDUNL15KC06 A32SDDUNL15KC06   WG 32.0 1.26 40.0000 1.575 22.0000 .8660 250.0000 9.843 1/4-18 NPT DN..150608 15 IP 15 IP
                                    5696211 A32SDDUNR11KC04 A32SDDUNR11KC04   WG 32.0 1.26 40.0000 1.575 22.0000 .8660 250.0000 9.843 1/4-18 NPT DN..110408 15 IP 15 IP
                                      5696213 A32SDDUNR15KC06 A32SDDUNR15KC06   WG 32.0 1.26 40.0000 1.575 22.0000 .8660 250.0000 9.843 1/4-18 NPT DN..150608 15 IP 15 IP
                                        5696210 A25RDDUNL11KC04 A25RDDUNL11KC04   WG 25.0 .984 32.0000 1.260 17.0000 .6690 200.0000 7.874 1/4-18 NPT DN..110408   15 IP
                                          5696089 A25RDDUNR11KC04 A25RDDUNR11KC04   WG 25.0 .984 32.0000 1.260 17.0000 .6690 200.0000 7.874 1/4-18 NPT DN..110408   15 IP
                                            5696212 A32SDDUNL11KC04 A32SDDUNL11KC04   WG 32.0 1.26 40.0000 1.575 22.0000 .8660 250.0000 9.843 1/4-18 NPT DN..110408 15 IP 15 IP
                                              List price:
                                              Discount: %
                                              Your price::
                                              Replacement This item is not available
                                              Replacement Product This item may be available through a distributor
                                              Qty
                                              Lavorazione interna • Bareni per inserti negativi

                                              A-DVUN 93°
                                              (4 Products)
                                              • I.D. Chamfering & ProfilingI.D. Chamfering & Profiling
                                              • Back BoringBack Boring
                                              View Products
                                              SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [CS] Coolant Supply Size [GAAP] Axial Rake Angle Gage Insert Shim Screw ID Drive Size Clamp Screw ID Drive Size
                                              5696263 A32SDVUNR16KC04 A32SDVUNR16KC04   WG 32.0 1.26 40.0000 1.574 22.0000 .8661 250.0000 9.842 1/4-18 NPT -3.000 VN..160408 15 IP 15 IP
                                                5696264 A32SDVUNL16KC04 A32SDVUNL16KC04   WG 32.0 1.26 40.0000 1.574 22.0000 .8661 250.0000 9.842 1/4-18 NPT -3.000 VN..160408 15 IP 15 IP
                                                  5696266 A40TDVUNL16KC04 A40TDVUNL16KC04   WG 40.0 1.574 50.0000 1.968 27.0000 1.063 300.0000 11.811 1/4-18 NPT -3.000 VN..160408 15 IP 15 IP
                                                    5696265 A40TDVUNR16KC04 A40TDVUNR16KC04   WG 40.0 1.57 50.0000 1.968 27.0000 1.063 300.0000 11.811 1/4-18 NPT -3.000 VN..160408 15 IP 15 IP
                                                      List price:
                                                      Discount: %
                                                      Your price::
                                                      Replacement This item is not available
                                                      Replacement Product This item may be available through a distributor
                                                      Qty
                                                      D-Style Clamping Boring Bars for Negative Inserts

                                                      Steel Shank with Through Coolant
                                                      (22 Products)
                                                      • I.D. Chamfering & ProfilingI.D. Chamfering & Profiling
                                                      • 5236852368
                                                      View Products
                                                      SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [CS] Coolant Supply Size Gage Insert Shim Screw ID Drive Size Clamp Screw ID Drive Size
                                                      5696285 A16TDCLNL3KC2 A16TDCLNL3KC2 WG 25.4 1.0 30.4800 1.200 16.2600 .6400 304.8000 12.000 1/4-18 NPT CN..322   15 IP
                                                        5696286 A16TDCLNL4KC3 A16TDCLNL4KC3 WG 25.4 1.0 30.4800 1.200 16.2600 .6400 304.8000 12.000 1/4-18 NPT CN..432   15 IP
                                                          5696296 A16TDCLNR3KC2 A16TDCLNR3KC2 WG 25.4 1.0 30.4800 1.200 16.2600 .6400 304.8000 12.000 1/4-18 NPT CN..322   15 IP
                                                            5696297 A16TDCLNR4KC3 A16TDCLNR4KC3 WG 25.4 1.0 30.4800 1.200 16.2600 .6400 304.8000 12.000 1/4-18 NPT CN..432   15 IP
                                                              5696287 A20UDCLNL4KC3 A20UDCLNL4KC3 WG 31.75 1.25 37.3400 1.470 19.4300 .7650 355.6000 14.000 1/4-18 NPT CN..432 15 IP 15 IP
                                                                5696298 A20UDCLNR4KC3 A20UDCLNR4KC3 WG 31.7 1.25 37.3400 1.470 19.4300 .7650 355.6000 14.000 1/4-18 NPT CN..432 15 IP 15 IP
                                                                  List price:
                                                                  Discount: %
                                                                  Your price::
                                                                  Replacement This item is not available
                                                                  Replacement Product This item may be available through a distributor
                                                                  Qty
                                                                  Bareni con bloccaggio di tipo D per inserti negativi

                                                                  Codolo in acciaio con adduzione interna di refrigerante
                                                                  (5 Products)
                                                                  • I.D. Chamfering & ProfilingI.D. Chamfering & Profiling
                                                                  • 5236852368
                                                                  View Products
                                                                  SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [L1A] L1 A Dimension [L1A] L1 A Dimension [CS] Coolant Supply Size [GAAP] Axial Rake Angle Gage Insert Shim Screw ID Drive Size Clamp Screw ID Drive Size
                                                                  5696079 A25RDDPNR11KC04 A25RDDPNR11KC04 WG 25.0 .984 37.0000 1.457 22.0000 .8660 200.0000 7.874 4.8000 .1890 1/4-18 NPT 0.000 DN..110408 15 IP 15 IP
                                                                    5696081 A32SDDPNL15KC06 A32SDDPNL15KC06 WG 32.0 1.26 45.0000 1.772 27.0000 1.063 250.0000 9.843 6.5300 .2570 1/4-18 NPT 0.000 DN..150608 15 IP 15 IP
                                                                      5696080 A32SDDPNR15KC06 A32SDDPNR15KC06 WG 32.0 1.26 45.0000 1.772 27.0000 1.063 250.0000 9.843 6.5300 .2570 1/4-18 NPT 0.000 DN..150608 15 IP 15 IP
                                                                        5696083 A40TDDPNL15KC06 A40TDDPNL15KC06 WG 40.0 1.575 52.0000 2.047 30.0000 1.181 300.0000 11.811 6.5700 .2590 1/4-18 NPT 0.000 DN..150608 15 IP 15 IP
                                                                          5696082 A40TDDPNR15KC06 A40TDDPNR15KC06 WG 40.0 1.575 52.0000 2.047 30.0000 1.181 300.0000 11.811 6.5700 .2590 1/4-18 NPT 0.000 DN..150608 15 IP 15 IP
                                                                            List price:
                                                                            Discount: %
                                                                            Your price::
                                                                            Replacement This item is not available
                                                                            Replacement Product This item may be available through a distributor
                                                                            Qty
                                                                            Bareni con bloccaggio di tipo D per inserti negativi

                                                                            Codolo in acciaio con adduzione interna di refrigerante
                                                                            (4 Products)
                                                                            • I.D. Chamfering & ProfilingI.D. Chamfering & Profiling
                                                                            • 5236852368
                                                                            • Back BoringBack Boring
                                                                            View Products
                                                                            SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [CS] Coolant Supply Size [GAAP] Axial Rake Angle Gage Insert Shim Screw ID Drive Size Clamp Screw ID Drive Size
                                                                            5696086 A32SDDQNL15KC06 A32SDDQNL15KC06 WG 32.0 1.26 40.0000 1.575 22.0000 .8660 250.0000 9.843 1/4-18 NPT -10.000 DN..150608 15 IP 15 IP
                                                                              5696085 A32SDDQNR15KC06 A32SDDQNR15KC06 WG 32.0 1.26 40.0000 1.575 22.0000 .8660 250.0000 9.843 1/4-18 NPT -10.000 DN..150608 15 IP 15 IP
                                                                                5696088 A40TDDQNL15KC06 A40TDDQNL15KC06 WG 40.0 1.575 50.0000 1.969 27.0000 1.063 300.0000 11.811 1/4-18 NPT -10.000 DN..150608 15 IP 15 IP
                                                                                  5696087 A40TDDQNR15KC06 A40TDDQNR15KC06 WG 40.0 1.575 50.0000 1.969 27.0000 1.063 300.0000 11.811 1/4-18 NPT -10.000 DN..150608 15 IP 15 IP
                                                                                    List price:
                                                                                    Discount: %
                                                                                    Your price::
                                                                                    Replacement This item is not available
                                                                                    Replacement Product This item may be available through a distributor
                                                                                    Qty
                                                                                    If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                                                                                    You are about to create a duplicate . Do you want to proceed?
                                                                                    You are about to delete Do you want to proceed?
                                                                                    What would you like to rename your to?
                                                                                    Please enter a valid name
                                                                                    Please enter a name for the duplicate
                                                                                    Please enter a valid name
                                                                                    You are about to add to your My Solutions page. Do you want to proceed?
                                                                                    Please enter a valid name
                                                                                    Send a copy of

                                                                                    Please enter a valid Email
                                                                                    Please enter a valid name

                                                                                    We have found the following CAD Drawings

                                                                                    Select the files you are looking for and download them all at once

                                                                                    You should be logged to see your dashboard information
                                                                                    The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                                                                                    item(s) successfully added to the cart
                                                                                    View Cart