| SAP 材料编号 | 6441881 |
| ISO 目录编号 | 7FNS25008 |
| ANSI 目录编号 | 7FNS25008 |
| 材质 | ALTIN-MT |
| 机床侧适配接头样式 | Straight-Cylindrical |
| [D3] 颈部直径 | 24.4000 mm |
| [D3] 颈部直径 | .9606 in |
| [L3] 可用长度 | 75.7000 mm |
| [L3] 可用长度 | 2.980 in |
| [Re] 刀尖半径 | 1.5880 mm |
| [Re] 刀尖半径 | .0625 in |
| 理论刀尖半径编程 I [RT] | 2.6900 mm |
| 理论刀尖半径编程 I [RT] | .1059 in |
| [Z] 排屑槽数量 | 6 |
| [D1] 有效的切削直径 | 25.4000 mm |
| [D1] 有效的切削直径 | 1.000 in |
| [D]适配接头/刀柄/镗孔直径 | 25.4 mm |
| [D]适配接头/刀柄/镗孔直径 | 1.0 in |
| [L] 总长 | 139.7000 mm |
| [L] 总长 | 5.500 in |
刀具尺寸： 排屑槽数： 6 
螺旋角： 20°
Corner Style: Torus
坡铣： 毛坯
3D仿形加工| 7FNS Inch | |||||||||||||||
| Geometrical Parameters | Ramping Guide for Circular and Linear Interpolation | ||||||||||||||
| Circular Interpolation | Linear Interpolation | ||||||||||||||
| Allowed Range of Hole Diameter | Calculated Length (mm) per Ramp Angle | ||||||||||||||
| diameter | Ap1 max | Rfm | Rt | Rc | Xfm | Yfm | YD | Number | Ramp Angle (degree) | ||||||
| [inch] | [inch] | [inch] | [inch] | [inch] | [inch] | [inch] | [inch] | flutes | Smallest | Largest | 1 | 2 | 3 | 4 | 5 |
| 1/4 | 0.0133 | 1/4 | 0.0269 | 0.0160 | 0.0133 | 0.0313 | 0.0525 | 6 | 0.355 | 0.5 | 0.76 | 0.38 | 0.25 | 0.19 | 0.15 |
| 3/8 | 0.0200 | 3/8 | 0.0399 | 0.0235 | 0.0200 | 0.0469 | 0.0788 | 6 | 0.5325 | 0.75 | 1.14 | 0.57 | 0.38 | 0.29 | 0.23 |
| 1/2 | 0.0266 | 1/2 | 0.0538 | 0.0320 | 0.0266 | 0.0625 | 0.1050 | 6 | 0.71 | 1 | 1.52 | 0.76 | 0.51 | 0.38 | 0.30 |
| 5/8 | 0.0333 | 5/8 | 0.0672 | 0.0400 | 0.0333 | 0.0781 | 0.1313 | 6 | 0.8875 | 1.25 | 1.91 | 0.95 | 0.63 | 0.48 | 0.38 |
| 3/4 | 0.0399 | 3/4 | 0.0798 | 0.0470 | 0.0399 | 0.0938 | 0.1575 | 6 | 1.065 | 1.5 | 2.29 | 1.14 | 0.76 | 0.57 | 0.46 |
| 1 | 0.0532 | 1 | 0.1059 | 0.0620 | 0.0532 | 0.1250 | 0.2100 | 6 | 1.42 | 2 | 3.05 | 1.52 | 1.02 | 0.76 | 0.61 |
| Recommended Feed | 30% | 30% | 30% | 30% | 10% | ||||||||||
 <="" td=""> |  <="" td="" /> |
|||||||||||||
| Profile Milling | AlTiN-MT | Recommended feed per tooth (IPT = inch/th) for 3D milling/profiling (A) | ||||||||||||
| A | Cutting Speed Vc SFM | D1 Diameter | ||||||||||||
| frac. | 1/4 | 5/16 | 3/8 | 1/2 | 5/8 | 3/4 | 1 | |||||||
| Material Group | ap | ae | Min | Max | dec. | .2500 | .3125 | .3750 | .5000 | .6250 | .7500 | 1.000 | ||
| M | 1 | 0.05 x D | 0.55 x D | 290 | – | 375 | IPT | .0118 | .0156 | .0188 | .0213 | .0281 | .0338 | .0450 |
| – | 2 | 0.05 x D | 0.55 x D | 190 | – | 260 | IPT | .0094 | .0125 | .0150 | .0189 | .0250 | .0300 | .0400 |
| – | 3 | 0.05 x D | 0.55 x D | 190 | – | 230 | IPT | .0094 | .0125 | .0150 | .0189 | .0250 | .0300 | .0400 |
| S | 1 | 0.05 x D | 0.55 x D | 160 | – | 300 | IPT | .0015 | .0020 | .0023 | .0029 | .0034 | .0039 | .0045 |
| – | 2 | 0.05 x D | 0.55 x D | 80 | – | 130 | IPT | .0008 | .0010 | .0012 | .0015 | .0018 | .0021 | .0024 |
| – | 3 | 0.05 x D | 0.55 x D | 80 | – | 130 | IPT | .0008 | .0010 | .0012 | .0015 | .0018 | .0021 | .0024 |
| – | 4 | 0.05 x D | 0.55 x D | 160 | – | 200 | IPT | .0011 | .0014 | .0017 | .0021 | .0025 | .0028 | .0033 |
ISO Catalog
ANSI Catalog
to find similar products.Please select a file to download
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
