successfully added to cart
View Cart

Notifications

Mark all as read

航空航天紧固件抽头

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (1645)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1637)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1637)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (1637)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (1645)
  • M Stainless Steel (1637)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (1637)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (1637)
  • K Cast Iron (1607)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (8)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (1001)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (598)
  • N Non-Ferrous Materials (708)
    • N1
      Wrought Aluminum
      (708)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (708)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (708)
Select All Star
  • CN (2)
  • DE (155)
  • GB (37)
  • IN (2)
  • SG (41)
  • US (379)
Applications
Applications
  • Pipe Thread Pipe Thread (61)
  • Tapping Blind Hole Tapping Blind Hole (709)
  • Tapping Through Hole Tapping Through Hole (694)
  • Threading Threading (1663)
Cutting Length
Cutting Length
  • 5.0 mm (4)
  • 7.0 mm (31)
  • 8.0 mm (27)
  • 8.201 mm (3)
  • 9.0 mm (9)
  • 9.1 mm (1)
  • 9.201 mm (2)
  • 9.5 mm (1)
  • 9.701 mm (117)
  • 9.9 mm (17)
  • 10.0 mm (29)
  • 10.101 mm (4)
  • 11.0 mm (20)
  • 11.5 mm (2)
  • 11.701 mm (3)
  • 11.8 mm (1)
  • 12.0 mm (48)
  • 12.101 mm (3)
  • 12.201 mm (6)
  • 12.3 mm (2)
  • 12.5 mm (2)
  • 12.701 mm (114)
  • 13.0 mm (47)
  • 13.201 mm (14)
  • 13.4 mm (2)
  • 14.201 mm (2)
  • 14.8 mm (30)
  • 14.9 mm (7)
  • 15.0 mm (92)
  • 15.101 mm (2)
  • 15.601 mm (2)
  • 15.8 mm (12)
  • 16.0 mm (70)
  • 17.0 mm (6)
  • 17.3 mm (11)
  • 17.475 mm (2)
  • 17.5 mm (80)
  • 17.901 mm (1)
  • 18.0 mm (45)
  • 18.7 mm (16)
  • 18.8 mm (2)
  • 18.901 mm (7)
  • 19.0 mm (28)
  • 19.05 mm (10)
  • 19.1 mm (60)
  • 20.0 mm (21)
  • 21.0 mm (39)
  • 22.0 mm (17)
  • 22.3 mm (12)
  • 22.401 mm (34)
  • 23.0 mm (15)
  • 23.901 mm (92)
  • 24.0 mm (48)
  • 25.0 mm (31)
  • 25.401 mm (33)
  • 26.201 mm (11)
  • 27.701 mm (62)
  • 28.0 mm (5)
  • 29.0 mm (1)
  • 30.0 mm (39)
  • 31.0 mm (52)
  • 32.0 mm (2)
  • 33.0 mm (2)
  • 34.0 mm (34)
  • 34.926 mm (10)
  • 35.0 mm (8)
  • 36.0 mm (7)
  • 38.0 mm (9)
  • 38.1 mm (15)
  • 40.0 mm (10)
  • 42.0 mm (4)
  • 43.5 mm (21)
  • 44.45 mm (3)
  • 48.0 mm (2)
  • 50.0 mm (8)
  • 50.801 mm (17)
  • 55.0 mm (2)
  • 61.0 mm (2)
  • 67.8 mm (1)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 0.197 in (4)
  • 0.276 in (31)
  • 0.315 in (27)
  • 0.323 in (3)
  • 0.354 in (9)
  • 0.358 in (1)
  • 0.362 in (2)
  • 0.374 in (1)
  • 0.382 in (117)
  • 0.39 in (17)
  • 0.394 in (29)
  • 0.398 in (4)
  • 0.433 in (20)
  • 0.453 in (2)
  • 0.461 in (3)
  • 0.465 in (1)
  • 0.473 in (48)
  • 0.477 in (3)
  • 0.48 in (6)
  • 0.484 in (2)
  • 0.492 in (2)
  • 0.5 in (114)
  • 0.512 in (47)
  • 0.52 in (14)
  • 0.528 in (2)
  • 0.559 in (2)
  • 0.583 in (30)
  • 0.587 in (7)
  • 0.591 in (92)
  • 0.595 in (2)
  • 0.614 in (2)
  • 0.622 in (12)
  • 0.63 in (70)
  • 0.669 in (6)
  • 0.681 in (11)
  • 0.689 in (2)
  • 0.69 in (80)
  • 0.705 in (1)
  • 0.709 in (45)
  • 0.736 in (16)
  • 0.74 in (2)
  • 0.744 in (7)
  • 0.748 in (28)
  • 0.75 in (10)
  • 0.752 in (60)
  • 0.787 in (21)
  • 0.828 in (39)
  • 0.866 in (17)
  • 0.878 in (12)
  • 0.882 in (34)
  • 0.906 in (15)
  • 0.942 in (92)
  • 0.946 in (48)
  • 0.984 in (31)
  • 1.0 in (33)
  • 1.032 in (11)
  • 1.091 in (62)
  • 1.102 in (5)
  • 1.143 in (1)
  • 1.181 in (39)
  • 1.22 in (52)
  • 1.26 in (2)
  • 1.299 in (2)
  • 1.339 in (34)
  • 1.375 in (10)
  • 1.379 in (8)
  • 1.417 in (7)
  • 1.496 in (9)
  • 1.5 in (15)
  • 1.575 in (10)
  • 1.655 in (4)
  • 1.713 in (21)
  • 1.75 in (3)
  • 1.891 in (2)
  • 1.969 in (8)
  • 2.0 in (17)
  • 2.165 in (2)
  • 2.402 in (2)
  • 2.669 in (1)
Cutting Length Min to Cutting Length Max
Thread Size
Thread Size
  • 1 - 11 1/2 (3)
  • 1 - 12 (12)
  • 1 - 8 (14)
  • 1 1/2 - 12 (5)
  • 1 1/2 - 6 (5)
  • 1 1/2 - 8 (3)
  • 1 1/4 - 12 (5)
  • 1 1/4 - 7 (5)
  • 1 1/4 - 8 (3)
  • 1 1/8 - 12 (5)
  • 1 1/8 - 7 (5)
  • 1 1/8 - 8 (3)
  • 1 3/4 - 5 (4)
  • 1 3/8 - 12 (4)
  • 1 3/8 - 6 (5)
  • 1 3/8 - 8 (3)
  • 1/16 - 27 (3)
  • 1/2 - 13 (46)
  • 1/2 - 14 (8)
  • 1/2 - 20 (35)
  • 1/4 - 18 (8)
  • 1/4 - 19 (4)
  • 1/4 - 20 (45)
  • 1/4 - 28 (47)
  • 1/8 - 27 (11)
  • 1/8 - 28 (4)
  • 10 - 24 (46)
  • 10 - 32 (61)
  • 12 - 24 (9)
  • 12 - 28 (8)
  • 2 - 4 1/2 (3)
  • 2 - 56 (9)
  • 3 - 48 (5)
  • 3/4 - 10 (25)
  • 3/4 - 14 (9)
  • 3/4 - 16 (24)
  • 3/8 - 16 (43)
  • 3/8 - 18 (4)
  • 3/8 - 19 (4)
  • 3/8 - 24 (39)
  • 4 - 40 (41)
  • 4 - 48 (4)
  • 5 - 40 (10)
  • 5/16 - 18 (41)
  • 5/16 - 24 (41)
  • 5/8 - 11 (32)
  • 5/8 - 18 (25)
  • 6 - 32 (55)
  • 6 - 40 (11)
  • 7/16 - 14 (32)
  • 7/16 - 20 (35)
  • 7/8 - 14 (14)
  • 7/8 - 9 (18)
  • 8 - 32 (59)
  • 8 - 36 (6)
  • 9/16 - 12 (16)
  • 9/16 - 18 (18)
  • M10 X 0,75 (3)
  • M10 X 1 (14)
  • M10 X 1,25 (15)
  • M10 X 1,5 (37)
  • M12 X 1 (5)
  • M12 X 1,25 (15)
  • M12 X 1,5 (16)
  • M12 X 1,75 (32)
  • M14 X 1 (3)
  • M14 X 1,5 (12)
  • M14 X 2 (18)
  • M16 X 1,5 (15)
  • M16 X 2 (24)
  • M18 X 1,5 (10)
  • M18 X 2 (3)
  • M18 X 2,5 (12)
  • M2 X 0,4 (10)
  • M2,5 X 0,45 (7)
  • M20 X 1,5 (11)
  • M20 X 2 (3)
  • M20 X 2,5 (18)
  • M22 X 1,5 (6)
  • M22 X 2,5 (7)
  • M24 X 1,5 (5)
  • M24 X 2 (4)
  • M24 X 3 (9)
  • M27 X 1,5 (4)
  • M27 X 3 (7)
  • M3 X 0,5 (34)
  • M3,5 X 0,6 (12)
  • M30 X 1,5 (4)
  • M30 X 2 (3)
  • M30 X 3,5 (7)
  • M33 X 3,5 (4)
  • M36 X 4 (4)
  • M4 X 0,7 (38)
  • M5 X 0,8 (42)
  • M6 X 0,75 (5)
  • M6 X 1 (42)
  • M7 X 1 (10)
  • M8 X 0,75 (4)
  • M8 X 1 (16)
  • M8 X 1,25 (42)
Thread Tolerance Class ANSI
Thread Tolerance Class ANSI
  • 2B (247)
  • 3B (20)
Thread Tolerance Class ISO
Thread Tolerance Class ISO
  • 6G-I (13)
  • 6H-I (343)
Tap PD Class
Tap PD Class
  • 0 (14)
  • 6G (5)
  • D11 (51)
  • D3 (12)
  • D4 (36)
  • D5 (51)
  • D6 (51)
  • D7 (29)
  • D8 (5)
  • D9 (3)
  • H11 (52)
  • H2 (68)
  • H3 (263)
  • H4 (53)
  • H5 (159)
  • H6 (49)
  • H7 (72)
  • NPT (3)
Tap Tolerance Class
Tap Tolerance Class
  • ISO 2 (332)
  • ISO 3 (13)
Connection Style
Connection Style
  • Cylindrical with Drive Square (1662)
  • Straight-Cylindrical (1)
Number of Flutes
Number of Flutes
  • 2 (264)
  • 3 (1104)
  • 4 (261)
  • 5 (32)
  • 6 (2)
Internal Coolant Capability
Internal Coolant Capability
application
Coating
Coating
  • Oxide (648)
  • TiCN (291)
  • TiN (153)
  • Uncoated (8)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • WP42EG (364)
  • WP49EG (938)
  • WU40EG (89)
  • WU41EG (272)
Tap Standard
Tap Standard
  • ANSI (960)
  • DIN 371 (190)
  • DIN 374 (132)
  • DIN 376 (196)
  • DIN-ANSI (105)
  • JIS (25)
Tap Type
Tap Type
  • 10 (13)
  • 11 (620)
  • 13 (17)
  • 8 (1013)
frontEnd
Thread TPI
Thread TPI
  • 4.5 mm (3)
  • 5.0 mm (4)
  • 6.0 mm (10)
  • 7.0 mm (10)
  • 8.0 mm (26)
  • 9.0 mm (18)
  • 10.0 mm (25)
  • 11.0 mm (33)
  • 11.5 mm (3)
  • 12.0 mm (47)
  • 13.0 mm (46)
  • 14.0 mm (64)
  • 16.0 mm (67)
  • 18.0 mm (96)
  • 19.0 mm (8)
  • 20.0 mm (115)
  • 24.0 mm (135)
  • 27.0 mm (14)
  • 28.0 mm (59)
  • 32.0 mm (175)
  • 36.0 mm (6)
  • 40.0 mm (62)
  • 48.0 mm (9)
  • 56.0 mm (9)
Thread TPI Min to Thread TPI Max
Thread TPI
Thread TPI
  • 0.177 in (3)
  • 0.197 in (4)
  • 0.237 in (10)
  • 0.276 in (10)
  • 0.315 in (26)
  • 0.354 in (18)
  • 0.394 in (25)
  • 0.433 in (33)
  • 0.453 in (3)
  • 0.473 in (47)
  • 0.512 in (46)
  • 0.551 in (64)
  • 0.63 in (67)
  • 0.709 in (96)
  • 0.748 in (8)
  • 0.787 in (115)
  • 0.946 in (135)
  • 1.063 in (14)
  • 1.102 in (59)
  • 1.26 in (175)
  • 1.417 in (6)
  • 1.575 in (62)
  • 1.891 in (9)
  • 2.205 in (9)
Thread TPI Min to Thread TPI Max
Thread Pitch
Thread Pitch
  • 0.4 mm (10)
  • 0.45 mm (4)
  • 0.5 mm (38)
  • 0.601 mm (10)
  • 0.701 mm (38)
  • 0.75 mm (13)
  • 0.8 mm (42)
  • 1.0 mm (96)
  • 1.25 mm (74)
  • 1.5 mm (120)
  • 1.75 mm (32)
  • 2.0 mm (57)
  • 2.2 mm (1)
  • 2.5 mm (41)
  • 3.0 mm (16)
  • 3.5 mm (13)
  • 4.0 mm (6)
  • 4.5 mm (2)
  • 5.0 mm (6)
Thread Pitch Min to Thread Pitch Max
Thread Pitch
Thread Pitch
  • 0.016 in (10)
  • 0.019 in (4)
  • 0.02 in (38)
  • 0.024 in (10)
  • 0.028 in (38)
  • 0.03 in (13)
  • 0.031 in (42)
  • 0.039 in (96)
  • 0.049 in (74)
  • 0.06 in (120)
  • 0.069 in (32)
  • 0.079 in (57)
  • 0.088 in (1)
  • 0.098 in (41)
  • 0.119 in (16)
  • 0.138 in (13)
  • 0.157 in (6)
  • 0.177 in (2)
  • 0.197 in (6)
Thread Pitch Min to Thread Pitch Max
Chamfer Form
Chamfer Form
  • FB (181)
  • PC (668)
  • PP (49)
  • SB (753)
  • TC (12)
backEnd
Back-End Diameter
Back-End Diameter
  • 2.2 mm (1)
  • 2.801 mm (23)
  • 3.5 mm (27)
  • 3.575 mm (143)
  • 4.0 mm (16)
  • 4.275 mm (78)
  • 4.5 mm (34)
  • 4.926 mm (111)
  • 5.0 mm (4)
  • 5.5 mm (5)
  • 5.601 mm (13)
  • 6.0 mm (68)
  • 6.2 mm (3)
  • 6.476 mm (93)
  • 7.0 mm (46)
  • 7.95 mm (8)
  • 8.0 mm (43)
  • 8.076 mm (103)
  • 8.201 mm (53)
  • 8.5 mm (1)
  • 9.0 mm (43)
  • 9.326 mm (105)
  • 9.675 mm (102)
  • 10.0 mm (26)
  • 10.5 mm (1)
  • 10.9 mm (35)
  • 11.0 mm (38)
  • 11.125 mm (4)
  • 12.0 mm (31)
  • 12.201 mm (69)
  • 12.5 mm (2)
  • 13.775 mm (11)
  • 14.0 mm (19)
  • 14.3 mm (7)
  • 14.976 mm (38)
  • 16.0 mm (30)
  • 16.55 mm (14)
  • 17.475 mm (5)
  • 17.7 mm (24)
  • 17.776 mm (4)
  • 18.0 mm (47)
  • 19.3 mm (3)
  • 19.326 mm (2)
  • 20.0 mm (13)
  • 20.326 mm (15)
  • 22.0 mm (16)
  • 22.75 mm (13)
  • 23.026 mm (4)
  • 23.201 mm (1)
  • 25.0 mm (5)
  • 25.901 mm (1)
  • 25.925 mm (13)
  • 28.0 mm (12)
  • 28.151 mm (8)
  • 28.576 mm (3)
  • 31.3 mm (6)
  • 31.326 mm (2)
  • 31.951 mm (1)
  • 32.0 mm (4)
  • 36.0 mm (6)
  • 36.275 mm (1)
  • 36.325 mm (1)
  • 40.0 mm (4)
  • 41.725 mm (1)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.088 in (1)
  • 0.11 in (23)
  • 0.138 in (27)
  • 0.142 in (143)
  • 0.157 in (16)
  • 0.168 in (78)
  • 0.177 in (34)
  • 0.194 in (111)
  • 0.197 in (4)
  • 0.217 in (5)
  • 0.221 in (13)
  • 0.237 in (68)
  • 0.244 in (3)
  • 0.255 in (93)
  • 0.276 in (46)
  • 0.313 in (8)
  • 0.315 in (43)
  • 0.318 in (103)
  • 0.323 in (53)
  • 0.335 in (1)
  • 0.354 in (43)
  • 0.367 in (105)
  • 0.381 in (102)
  • 0.394 in (26)
  • 0.414 in (1)
  • 0.429 in (35)
  • 0.433 in (38)
  • 0.438 in (4)
  • 0.473 in (31)
  • 0.48 in (69)
  • 0.492 in (2)
  • 0.542 in (11)
  • 0.551 in (19)
  • 0.564 in (7)
  • 0.59 in (38)
  • 0.63 in (30)
  • 0.652 in (14)
  • 0.689 in (5)
  • 0.698 in (24)
  • 0.701 in (4)
  • 0.709 in (47)
  • 0.76 in (3)
  • 0.761 in (2)
  • 0.787 in (13)
  • 0.8 in (15)
  • 0.866 in (16)
  • 0.896 in (13)
  • 0.907 in (4)
  • 0.913 in (1)
  • 0.984 in (5)
  • 1.02 in (1)
  • 1.022 in (13)
  • 1.102 in (12)
  • 1.108 in (8)
  • 1.125 in (3)
  • 1.232 in (6)
  • 1.233 in (2)
  • 1.258 in (1)
  • 1.26 in (4)
  • 1.417 in (6)
  • 1.428 in (1)
  • 1.43 in (1)
  • 1.575 in (4)
  • 1.643 in (1)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

Multipurpose • VariTap™ • VT-SFT Spiral Flute • HSS-E

VariTap™ Spiral-Flute HSS-E Taps • Blind Holes
(8 Products)
  • 攻丝: 盲孔攻丝: 盲孔
  • HSS-EHSS-E
  • 倒角类型C(2-3)倒角类型C(2-3)
  • 攻丝螺旋角: 45°攻丝螺旋角: 45°
  • DIN Number ANSIDIN Number ANSI
  • 射流冷却: 攻丝射流冷却: 攻丝
  • 3852938529
  • 制造商规格: M制造商规格: M
  • 制造商规格: MF制造商规格: MF
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D1-TDZ] Thread Diameter Size [L] Overall Length [L] Overall Length [L3] Thread Length [L3] Thread Length [L2] Useable Length [L2] Useable Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [Z] Number of Flutes Dimension Standard Thread Tolerance Class ISO
5436528 VTSFT9507 VTSFT9507 WP42EG   M6 X 1 80.0000 3.150 12.0000 .4700 30.0000 1.180 6.477 .255 3 DIN-ANSI 6H-I
    List price:
    $38.41 /each.
    Your price::
    Qty
    5436527 VTSFT9507 VTSFT9507 WP49EG   M6 X 1 80.0000 3.150 12.0000 .4700 30.0000 1.180 6.477 .255 3 DIN-ANSI 6H-I
      List price:
      $44.16 /each.
      Your price::
      Qty
      5436544 VTSFT9510 VTSFT9510 WP42EG   M10 X 1,5 99.9000 3.940 17.9000 .7100 38.9000 1.530 9.677 .381 3 DIN-ANSI 6H-I
        List price:
        $58.67 /each.
        Your price::
        Qty
        5436550 VTSFT9513 VTSFT9513 WP42EG   M12 X 1,75 110.0000 4.330 21.0000 .8300 44.0000 1.730 9.322 .367 3 DIN-ANSI 6H-I
          List price:
          $70.73 /each.
          Your price::
          Qty
          5436556 VTSFT9516 VTSFT9516 WP42EG   M16 X 1,5 110.0000 4.330 24.0000 .9400 51.0000 2.010 12.192 .48 3 DIN-ANSI 6H-I
            List price:
            $125.27 /each.
            Your price::
            Qty
            5436566 VTSFT9521 VTSFT9521 WP42EG   M20 X 2,5 140.0000 5.510 30.0000 1.180 64.0000 2.520 16.561 .652 4 DIN-ANSI 6H-I
              List price:
              $249.32 /each.
              Your price::
              Qty
              List price:
              Discount: %
              Your price::
              Replacement This item is no longer available
              Replacement Product Please contact customer service for assistance
              Qty

              Sold in pkg. of

              ORIGINAL PRODUCT

              Multipurpose • VariTap™ • VT-SFT Spiral-Flute • HSS-E

              VariTap™ Spiral-Flute HSS-E Taps • Blind Holes
              (25 Products)
              • 攻丝: 盲孔攻丝: 盲孔
              • HSS-EHSS-E
              • 倒角类型C(2-3)倒角类型C(2-3)
              • 攻丝螺旋角: 45°攻丝螺旋角: 45°
              • DIN Number ANSIDIN Number ANSI
              • 射流冷却: 攻丝射流冷却: 攻丝
              • 3852738527
              • 制造商规格: UNC制造商规格: UNC
              • 制造商规格: UNF制造商规格: UNF
              View Products