New Customer
Are you new to WIDIA? Create an account and get started.
Create AccountRegistered Customer
Already have an account? Sign in.
Sign InSelected Account
There is an issue with your account. Please Contact Customer Service.
Sold-to
Change Account
Ship To Account
Change Account
New Customer
Are you new to WIDIA? Create an account and get started.
Create AccountRegistered Customer
Already have an account? Sign in.
Sign InSelected Account
There is an issue with your account. Please Contact Customer Service.
Sold-to
Change Account
Ship To Account
Change Account
successfully added to cart
View Cart
View Cart
Notifications
Mark all as read
3/4" • Weldon® Shank
3/4″ • Weldon® Shanks
Features and benefits
- Double-sided, 12 cutting edges.
- Anti-rotation feature for better stability and higher feed rates.
- Excellent for heavy roughing and semi-finishing of all materials.
- Suitable for high-feed face milling operations.
Uses and application
刀柄 — 圆柱 Weldon 2平底
3D仿形加工
侧铣/方肩铣削： 球形刀尖
槽铣： 方头立铣
端面铣削
刀座
铣削 — 贯通式冷却
36310
Workpiece Materials
P
钢
M
不锈钢
K
铸铁
S
高温合金
H
淬火材料
Filters and Columns
Filters
Filters
Filters
View filters in
Metric
Inch
工件材料
工件材料
-
P 钢 (1)
-
P0低碳钢，长切屑 C < .25%；<125 HB；<530 N/mm^2 UTS(1)
-
P1低碳钢、短切屑 C < .25%；<125 HB；<530 N/mm^2 UTS(1)
-
P2中碳钢和高碳钢 C < .25%；<220 HB；<25 HRC；>530 N/mm^2 UTS(1)
-
P3合金钢和工具钢 C > .25%；<330 HB；<35 HRC；600-850 N/mm^2 UTS(1)
-
P4合金钢和工具钢 C > .25%；350-420 HB；35-43 HRC；850-1400 N/mm^2 UTS(1)
-
P5铁素体、马氏体和 PH 不锈钢 <330 HB；<35 HRC；600-900 N/mm^2 UTS(1)
-
P6高强度铁素体、马氏体和 PH 不锈钢 350-450 HB；35-43 HRC；900-2400 N/mm^2 UTS(1)
-
-
M 不锈钢 (1)
-
M1奥氏体不锈钢 130-200 HB；<600 N/mm^2 UTS(1)
-
M2高强度奥氏体不锈钢和铸造不锈钢 150-230 HB；<25 HRC; >600 N/mm^2 UTS(1)
-
M3双相不锈钢 135-275 HB；<30 HRC; 500-1200 N/mm^2 UTS(1)
-
-
K 铸铁 (1)
-
K1灰口铸铁 120-290 HB；<32 HRC; 125-500 N/mm^2 UTS(1)
-
K2中低强度 CGI 和球墨铸铁 130-260 HB；<28 HRC; <600 N/mm^2 UTS(1)
-
K3高强度球墨铸铁和奥氏体球墨铸铁 180-350 HB；<43 HRC; >600 N/mm^2 UTS(1)
-
-
S 高温合金 (1)
-
S1铁基耐热合金 160-260 HB；25-48 HRC；500-1200 N/mm^2 UTS(1)
-
S2钴基耐热合金 250-450 HB；25-48 HRC；1000-1450 N/mm^2 UTS(1)
-
S3镍基耐热合金 160-450 HB；<48 HRC; 600-1700 N/mm^2 UTS(1)
-
S4钛和钛合金 300-400 HB；33-43 HRC；900-1600 N/mm^2 UTS(1)
-
-
H 淬火材料 (1)
-
H1淬火材料 44-48 HRC(1)
-
应用
应用
-
Face Milling (1)
-
Pocket (1)
-
Pocket Milling (1)
-
Profile Milling (1)
-
Ramping (1)
-
Shoulder Ball Nose (1)
-
Shoulder Milling (1)
-
-
Slot Milling (1)
-
Slot Square End (1)
application
切削刀具材质
切削刀具材质
-
WK15CM (1)
-
WP25PM (1)
-
WP35CM (1)
-
WP40PM (1)
-
WU35PM (1)
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying
1- 1
of 1 results
Metric
Inch
Show
Metric
Inch
| SAP 材料编号 | ISO 目录编号 | ANSI 目录编号 | [D1MAX] 最大切削直径 | [D1MAX] 最大切削直径 | [D1] 有效的切削直径 | [D1] 有效的切削直径 | [D]适配接头/刀柄/镗孔直径 | [D]适配接头/刀柄/镗孔直径 | [L] 总长 | [L] 总长 | [AP1MAX] 第一个最大切深 | [AP1MAX] 第一个最大切深 | 刀片数量 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 6009950 | M200D200Z03W150RN64 | M200D200Z03W150RN64 | 50.8000 | 2.000 | 31.7000 | 1.250 | 38.09 | 1.5 | 119.1300 | 4.690 | 9.5000 | .3700 | 3 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$640,90
/each
Your price::
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
List price:
Discount: %
Replacement
This item is no longer available
Replacement Product Please contact customer service for assistance
Replacement Product Please contact customer service for assistance
Qty
Sold in pkg. of
Insert Selection Guide • M200™ Series • Large IC Expansion
| Obróbka lekka | Obróbka średnia | Obróbka ciężka | ||||
| Grupa materiałowa | Geometria | Gatunek | Geometria | Gatunek | Geometria | Gatunek |
| P1–P2 | .E..ML | WP25PM | .S..MM | WP40PM | .S..MM | WP40PM |
| P3–P4 | .E..ML | WP25PM | .S..MM | WP40PM | .S..MM | WP40PM |
| P5–P6 | .E..ML | WP25PM | .S..MM | WP35CM | .S..MM | WP35CM |
| M1–M2 | .E..ML | WP25PM | .S..MM | WU35PM | .S..MM | WU35PM |
| M3 | .E..ML | WP25PM | .S..MM | WU35PM | .S..MM | WU35PM |
| K1–K2 | – | – | .S..MM | WK15CM | – | – |
| K3 | – | – | .S..MM | WK15CM | – | – |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | .E..ML | WP25PM | .S..MM | WU35PM | .S..MM | WU35PM |
| S3 | .E..ML | WP25PM | .S..MM | WU35PM | .S..MM | WU35PM |
| S4 | .E..ML | WP25PM | .S..MM | WU35PM | .S..MM | WU35PM |
| H1 | – | – | .S..MM | WP25PM | – | – |
| Zalecany posuw na ostrze (fz) zależny od % szerokości frezowania (ae) | ||||||||||||||||
| Geometria płytki | 10% | 20% | 30% | 40% | 50–100% | Geometria płytki | ||||||||||
| .E..ML | .003 | .009 | .016 | .003 | .007 | .012 | .002 | .006 | .010 | .002 | .006 | .010 | .002 | .005 | .009 | .E..ML |
| .S..MM | .007 | .015 | .027 | .005 | .011 | .020 | .005 | .010 | .017 | .004 | .009 | .016 | .004 | .009 | .016 | .S..MM |
| Zalecany posuw na ostrze (fz) zależny od % szerokości frezowania (ae) | ||||||||||||||||
| Geometria płytki | 10% | 20% | 30% | 40% | 50–100% | Geometria płytki | ||||||||||
| .E..ML | .004 | .011 | .020 | .003 | .008 | .015 | .003 | .007 | .013 | .003 | .007 | .012 | .003 | .007 | .012 | .E..ML |
| .S..MM | .009 | .019 | .034 | .006 | .014 | .025 | .006 | .012 | .021 | .005 | .011 | .020 | .005 | .011 | .020 | .S..MM |
| Zalecany posuw na ostrze (fz) zależny od % szerokości frezowania (ae) | ||||||||||||||||
| Geometria płytki | 10% | 20% | 30% | 40% | 50–100% | Geometria płytki | ||||||||||
| .E..ML | .008 | .021 | .037 | .006 | .016 | .027 | .005 | .014 | .023 | .005 | .013 | .022 | .005 | .012 | .021 | .E..ML |
| .S..MM | .016 | .035 | .065 | .012 | .025 | .046 | .010 | .022 | .040 | .010 | .020 | .037 | .009 | .020 | .036 | .S..MM |
| Obróbka lekka | Obróbka średnia | Obróbka ciężka |
| Zalecany posuw na ostrze (fz) zależny od % szerokości frezowania (ae) | ||||||||||||||||
| Geometria płytki | 10% | 20% | 30% | 40% | 50–100% | Geometria płytki | ||||||||||
| .E..ML | .006 | .015 | .027 | .004 | .011 | .020 | .004 | .010 | .017 | .004 | .009 | .016 | .003 | .009 | .016 | .E..ML |
| .S..MM | .012 | .025 | .046 | .009 | .018 | .033 | .007 | .016 | .029 | .007 | .015 | .027 | .007 | .015 | .026 | .S..MM |
Recommended Starting Speeds [SFM]
| Grupa materiałowa | WK15CM | WP25PM | WU35PM | WP35CM | WP40PM | |||||||||||
| P | 1 | – | – | – | 1295 | 1120 | 1060 | 1025 | 905 | 845 | 1790 | 1555 | 1460 | 1165 | 1025 | 965 |
| 2 | – | – | – | 1080 | 940 | 785 | 865 | 750 | 630 | 1105 | 1000 | 905 | 985 | 845 | 710 | |
| 3 | – | – | – | 1000 | 845 | 690 | 785 | 670 | 550 | 1000 | 905 | 805 | 905 | 770 | 630 | |
| 4 | – | – | – | 890 | 725 | 590 | 710 | 590 | 475 | 750 | 690 | 630 | 805 | 670 | 535 | |
| 5 | – | – | – | 725 | 670 | 590 | 590 | 535 | 475 | 1025 | 905 | 830 | 670 | 610 | 535 | |
| 6 | – | – | – | 650 | 490 | 395 | 510 | 395 | 310 | 630 | 535 | 430 | 590 | 450 | 355 | |
| M | 1 | – | – | – | 805 | 710 | 650 | 670 | 590 | 535 | 805 | 725 | 610 | 770 | 670 | 610 |
| 2 | – | – | – | 725 | 630 | 510 | 610 | 510 | 430 | 725 | 630 | 550 | 690 | 590 | 490 | |
| 3 | – | – | – | 550 | 475 | 370 | 450 | 395 | 310 | 570 | 510 | 450 | 510 | 450 | 355 | |
| K | 1 | 1655 | 1520 | 1340 | 905 | 805 | 725 | – | – | – | 1165 | 1045 | 940 | – | – | – |
| 2 | 1320 | 1165 | 1080 | 710 | 630 | 590 | – | – | – | 925 | 830 | 750 | – | – | – | |
| 3 | 1105 | 985 | 905 | 590 | 535 | 475 | – | – | – | 770 | 690 | 630 | – | – | – | |
| N | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | 155 | 140 | 95 | 140 | 120 | 95 | – | – | – | 155 | 140 | 120 |
| 2 | – | – | – | 155 | 140 | 95 | 140 | 120 | 95 | – | – | – | 155 | 140 | 120 | |
| 3 | – | – | – | 200 | 155 | 95 | 180 | 140 | 95 | – | – | – | 200 | 155 | 120 | |
| 4 | – | – | – | 275 | 200 | 140 | 235 | 180 | 120 | 260 | 200 | 130 | 260 | 200 | 140 | |
| H | 1 | – | – | – | 475 | 355 | 275 | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |