successfully added to cart
View Cart
Cutting Units • Top Thread™ and Top Groove™
Cutting Units • Top Thread™ and Top Groove™
Cutting Units • Top Thread™ and Top Groove™
Cutting Units • Top Thread™ and Top Groove™

NS 90°

Cutting Units • Top Thread™ and Top Groove™

Uses and application

  • Shank - PSCShank - PSC
  • 制造商规格: ISO 26623制造商规格: ISO 26623
  • Coolant: Through Coolant 80 bar MaximumCoolant: Through Coolant 80 bar Maximum
  • Coolant: Through Coolant 1200 psi MaximumCoolant: Through Coolant 1200 psi Maximum

Workpiece Materials

P Steel
M Stainless Steel
K Cast Iron
N Non-Ferrous
S High-Temp Alloys
H Hardened Materials
Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Applications
  • Grooving Grooving (4)
Workpiece Material
  • P Steel (4)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (4)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (4)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (4)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (4)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (4)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (4)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (4)
  • M Stainless Steel (4)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (4)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (4)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (4)
  • K Cast Iron (4)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (4)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (4)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (4)
  • N Non-Ferrous Materials (4)
    • N1
      Wrought Aluminum
      (4)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (4)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (4)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (4)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (4)
    • N6
      Carbon, Graphite Composites, CFRP
      (4)
    • N7
      MMC's
      (4)
  • S High-Temp Alloys (4)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (4)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (4)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (4)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (4)
  • H Hardened Materials (4)
    • H1
      Hardened Materials 44-48 HRC
      (4)
    • H2
      Hardened Materials 48-55 HRC
      (4)
    • H3
      Hardened Materials 56-60 HRC
      (4)
    • H4
      Hardened Materials >60 HRC
      (4)
Type of Thread
  • 60 (4)
  • ACME (4)
  • API (4)
  • API RD (2)
  • BSW (2)
  • BUTTRESS (4)
  • M (2)
  • NPT (2)
  • STUB ACME (2)
  • UN (4)
  • UNJ (2)
Cutting Condition
  • Heavily Interrupted Cut (4)
  • Lightly Interrupted Cut (4)
  • Smooth Cut (4)
  • Varying Depth of Cut (4)
Cutting Condition Material
  • H-All (4)
  • K-All (4)
  • M-All (4)
  • N-All (4)
  • P-All (4)
  • S-All (4)
Tool Cutting Edge Angle
  • 90.0 (4)
to
Connection Style
  • PSC (4)
Cutting Edges Per Insert
  • 1.0 (4)
  • 2.0 (4)
to
cornerConfiguration
Corner Radius
  • 0.051 (1)
  • 0.057 (1)
  • 0.066 (2)
  • 0.076 (4)
  • 0.08 (2)
  • 0.094 (2)
  • 0.097 (1)
  • 0.1 (2)
  • 0.102 (2)
  • 0.116 (1)
  • 0.117 (1)
  • 0.127 (2)
  • 0.131 (2)
  • 0.132 (2)
  • 0.133 (2)
  • 0.15 (2)
  • 0.155 (2)
  • 0.157 (2)
  • 0.16 (2)
  • 0.165 (4)
  • 0.173 (2)
  • 0.178 (2)
  • 0.19 (4)
  • 0.191 (4)
  • 0.198 (2)
  • 0.2 (2)
  • 0.202 (2)
  • 0.224 (2)
  • 0.235 (2)
  • 0.244 (1)
  • 0.25 (2)
  • 0.251 (2)
  • 0.254 (4)
  • 0.269 (2)
  • 0.282 (2)
  • 0.284 (2)
  • 0.3 (2)
  • 0.315 (3)
  • 0.318 (4)
  • 0.33 (2)
  • 0.34 (2)
  • 0.343 (2)
  • 0.356 (2)
  • 0.404 (2)
  • 0.406 (2)
  • 0.43 (2)
  • 0.445 (4)
  • 0.472 (1)
  • 0.49 (2)
  • 0.508 (2)
  • 0.565 (1)
  • 0.57 (1)
  • 0.572 (4)
  • 0.575 (3)
  • 0.787 (2)
  • 0.902 (4)
  • 1.0 (2)
  • 1.194 (2)
  • 1.195 (1)
  • 1.25 (2)
  • 1.5 (2)
  • 1.585 (2)
  • 1.588 (4)
  • 1.59 (1)
  • 1.75 (2)
  • 1.98 (1)
  • 1.981 (2)
  • 2.0 (4)
  • 2.25 (4)
  • 2.388 (4)
  • 2.39 (1)
  • 2.5 (2)
  • 3.175 (2)
  • 3.18 (1)
to
Corner Radius
  • 0.002 (1)
  • 0.0023 (1)
  • 0.0026 (2)
  • 0.003 (4)
  • 0.0031 (2)
  • 0.0037 (2)
  • 0.0038 (1)
  • 0.004 (2)
  • 0.0046 (2)
  • 0.005 (2)
  • 0.0052 (2)
  • 0.0053 (2)
  • 0.0059 (2)
  • 0.006 (2)
  • 0.0062 (2)
  • 0.0065 (4)
  • 0.0068 (2)
  • 0.007 (2)
  • 0.0075 (4)
  • 0.0078 (2)
  • 0.0079 (1)
  • 0.008 (2)
  • 0.0088 (2)
  • 0.0093 (2)
  • 0.0096 (1)
  • 0.0099 (2)
  • 0.01 (4)
  • 0.0106 (2)
  • 0.0111 (2)
  • 0.0112 (2)
  • 0.0118 (2)
  • 0.0124 (2)
  • 0.0125 (4)
  • 0.013 (2)
  • 0.0135 (4)
  • 0.014 (2)
  • 0.0159 (2)
  • 0.016 (2)
  • 0.017 (2)
  • 0.0175 (4)
  • 0.0186 (1)
  • 0.0193 (2)
  • 0.02 (2)
  • 0.0225 (4)
  • 0.031 (2)
  • 0.0355 (4)
  • 0.0394 (2)
  • 0.047 (2)
  • 0.0492 (2)
  • 0.0591 (2)
  • 0.0625 (4)
  • 0.0689 (2)
  • 0.078 (2)
  • 0.0787 (4)
  • 0.0886 (4)
  • 0.094 (4)
  • 0.0984 (2)
  • 0.106 (1)
  • 0.125 (2)
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • K2885 (2)
  • K313 (4)
  • K420 (4)
  • K4H (2)
  • K68 (4)
  • KB1345 (4)
  • KB1630 (4)
  • KB5625 (2)
  • KC250 (2)
  • KC5010 (4)
  • KC5025 (4)
  • KC5410 (4)
  • KC710 (4)
  • KC720 (4)
  • KC722 (4)
  • KC730 (4)
  • KC732 (2)
  • KC810 (4)
  • KC850 (4)
  • KC910 (2)
  • KC9110 (4)
  • KC9120 (2)
  • KC9320 (4)
  • KC935 (4)
  • KC950 (4)
  • KCK20 (4)
  • KCK20B (4)
  • KCP10B (4)
  • KCP25B (4)
  • KCU10 (4)
  • KCU25 (4)
  • KD050 (1)
  • KD081 (2)
  • KD100 (3)
  • KD120 (4)
  • KD1425 (2)
  • KT175 (2)
  • KT315 (4)
  • KU10T (4)
  • KU25T (4)
  • KU30T (4)
  • KY3000 (4)
  • THM (2)
  • TN10P (3)
  • TN6010 (4)
  • TN6025 (4)
  • TN7110 (4)
  • WU10HT (1)
  • WU10PT (2)
  • WU25PT (1)
Hand Of Tool
  • L (2)
  • R (2)
Minimum Axial Groove Diameter
  • 0.0 (4)
  • 1.626 (2)
  • 1.874 (2)
  • 2.252 (2)
  • 3.5 (2)
  • 5.5 (2)
  • 6.874 (2)
  • 8.252 (2)
  • 8.752 (2)
to
Minimum Axial Groove Diameter
  • 0.0 (4)
  • 41.3 (2)
  • 47.6 (2)
  • 57.2 (2)
  • 88.9 (2)
  • 139.7 (2)
  • 174.6 (2)
  • 209.6 (2)
  • 222.3 (2)
to
Maximum Axial Groove Diameter
  • 9999.0 (4)
to
Maximum Axial Groove Diameter
  • 393.661 (4)
to
Cutting Direction
  • E (4)
Wiper Insert
  • N (4)
frontEnd
Clamp Style
  • N (4)
Insert Shape
  • TN-TOP NOTCH (4)
Cutting Width
  • 1.0 (2)
  • 1.19 (1)
  • 1.194 (2)
  • 1.2 (2)
  • 1.5 (2)
  • 1.57 (2)
  • 1.575 (2)
  • 1.75 (2)
  • 1.829 (2)
  • 1.981 (2)
  • 2.0 (2)
  • 2.2 (2)
  • 2.235 (2)
  • 2.24 (1)
  • 2.25 (1)
  • 2.388 (2)
  • 2.39 (1)
  • 2.464 (2)
  • 2.5 (2)
  • 2.667 (2)
  • 2.743 (2)
  • 2.75 (2)
  • 2.794 (2)
  • 2.997 (2)
  • 3.0 (4)
  • 3.099 (2)
  • 3.17 (2)
  • 3.175 (4)
  • 3.18 (1)
  • 3.2 (4)
  • 3.25 (2)
  • 3.251 (2)
  • 3.32 (1)
  • 3.329 (1)
  • 3.5 (4)
  • 3.607 (2)
  • 3.96 (2)
  • 3.962 (2)
  • 3.974 (1)
  • 3.988 (2)
  • 4.0 (4)
  • 4.24 (1)
  • 4.242 (4)
  • 4.25 (1)
  • 4.3 (2)
  • 4.5 (4)
  • 4.521 (2)
  • 4.699 (3)
  • 4.775 (4)
  • 4.78 (1)
  • 4.785 (1)
  • 4.788 (1)
  • 4.8 (2)
  • 4.801 (4)
  • 4.81 (2)
  • 4.88 (1)
  • 4.95 (2)
  • 5.0 (2)
  • 5.004 (2)
  • 5.131 (2)
  • 5.41 (2)
  • 5.5 (2)
  • 5.563 (2)
  • 6.0 (2)
  • 6.35 (2)
  • 6.36 (1)
  • 6.48 (2)
to
Cutting Width
  • 0.0394 (2)
  • 0.047 (2)
  • 0.0472 (2)
  • 0.0591 (2)
  • 0.062 (2)
  • 0.0689 (2)
  • 0.072 (2)
  • 0.078 (2)
  • 0.0787 (2)
  • 0.079 (1)
  • 0.0866 (2)
  • 0.088 (2)
  • 0.0886 (1)
  • 0.094 (2)
  • 0.097 (2)
  • 0.0984 (2)
  • 0.105 (2)
  • 0.108 (2)
  • 0.1083 (2)
  • 0.11 (2)
  • 0.118 (2)
  • 0.1181 (4)
  • 0.122 (2)
  • 0.125 (4)
  • 0.126 (4)
  • 0.128 (2)
  • 0.131 (1)
  • 0.1378 (4)
  • 0.142 (2)
  • 0.156 (2)
  • 0.157 (2)
  • 0.1574 (4)
  • 0.1575 (4)
  • 0.167 (4)
  • 0.1673 (1)
  • 0.169 (2)
  • 0.1771 (4)
  • 0.1772 (4)
  • 0.178 (2)
  • 0.185 (3)
  • 0.188 (4)
  • 0.189 (4)
  • 0.192 (1)
  • 0.195 (2)
  • 0.1969 (2)
  • 0.197 (2)
  • 0.202 (2)
  • 0.213 (2)
  • 0.2165 (2)
  • 0.2166 (1)
  • 0.219 (2)
  • 0.2362 (2)
  • 0.25 (2)
  • 0.255 (2)
to
Insert Size
  • 3 (2)
  • 4 (2)
Maximum Cutting Depth
  • 5.33 (2)
  • 7.47 (2)
to
Maximum Cutting Depth
  • 0.2098 (2)
  • 0.2941 (2)
to
insertGeometry
Cutting Tool Material
  • B H (4)
  • B L (2)
  • C N (4)
  • D P (3)
  • H T (4)
  • H W (4)
backEnd
Connection Type
  • TAPER SHANK (4)
System Size
  • PSC50 (4)
Back-End Diameter
  • 1.9685 (4)
to
Back-End Diameter
  • 50.0 (4)
to
other
Platform
  • PSC50 (4)
Tool Unit
  • M (4)
kmtConfigurable
  • false (4)
Over All Length [L]
  • 52.0 (2)
  • 62.0 (2)
to
Over All Length [L]
  • 2.0472 (2)
  • 2.4409 (2)
to
Insert Hand
  • L (2)
  • R (2)
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying 1- 4 of 4 results
Select Columns
Select Filters
Metric
Inch
Show
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms
6338260 PSC50NSL4 PSC50NSL4 62.0000 2.440 35.0000 1.378 NG4L 0.69
    List price:
    $301.00 /each.
    Your price::
    Qty
    6338258 PSC50NSL3 PSC50NSL3 52.0000 2.047 35.0000 1.378 NG3L 0.69
      List price:
      $386.51 /each.
      Your price::
      Qty
      6338259 PSC50NSR4 PSC50NSR4 62.0000 2.440 35.0000 1.378 NG4R 0.68
        List price:
        $385.89 /each.
        Your price::
        Qty
        6338253 PSC50NSR3 PSC50NSR3 52.0000 2.047 35.0000 1.378 NG3R 0.79
          List price:
          $420.48 /each.
          Your price::
          Qty
          List price:
          Discount: %
          Your price::
          Replacement This item is not available
          Replacement Product This item may be available through a distributor
          Qty

          Sold in pkg. of

          product-image
          Please adjust the following properties from

          ISO Catalog

          ANSI Catalog

          to find similar products.
          If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
          You are about to create a duplicate . Do you want to proceed?
          You are about to delete Do you want to proceed?
          What would you like to rename your to?
          Please enter a valid name
          Please enter a name for the duplicate
          Please enter a valid name
          You are about to add to your My Solutions page. Do you want to proceed?
          Please enter a valid name
          Send a copy of

          Please enter a valid Email
          Please enter a valid name

          We have found the following CAD Drawings

          Select the files you are looking for and download them all at once

          You should be logged to see your dashboard information
          The product/s () you were trying to add to the cart is/are not available, please contact customer service.
          item(s) successfully added to the cart
          View Cart