successfully added to cart
View Cart
Top Notch™ 螺纹加工及切槽加工
Top Notch™ 螺纹加工及切槽加工
Top Notch™ 螺纹加工及切槽加工
Top Notch™ 螺纹加工及切槽加工
Top Notch™ 螺纹加工及切槽加工
Top Notch™ 螺纹加工及切槽加工

NS-HPC • KM Micro™ 用于外圆加工的切削装置

Top Notch™ 螺纹加工及切槽加工

Workpiece Materials

P Steel
M Stainless Steel
K Cast Iron
N Non-Ferrous
S High-Temp Alloys
H Hardened Materials
Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (2)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (2)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (2)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (2)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (2)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (2)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (2)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (2)
  • M Stainless Steel (2)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (2)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (2)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (2)
  • K Cast Iron (2)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (2)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (2)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (2)
  • N Non-Ferrous Materials (2)
    • N1
      Wrought Aluminum
      (2)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (2)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (2)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (2)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (2)
    • N6
      Carbon, Graphite Composites, CFRP
      (2)
    • N7
      MMC's
      (2)
  • S High-Temp Alloys (2)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (2)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (2)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (2)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (2)
  • H Hardened Materials (2)
    • H1
      Hardened Materials 44-48 HRC
      (2)
    • H2
      Hardened Materials 48-55 HRC
      (2)
Applications
Applications
  • Chamfer Turning Chamfer Turning (2)
  • Cut-Off Cut-Off (2)
  • Deep Grooving Deep Grooving (2)
  • Face Grooving Face Grooving (2)
  • Facing Facing (2)
  • Grooving Grooving (2)
  • Multiple Direction Cutting Multiple Direction Cutting (2)
  • OD Thread Turning OD Thread Turning (2)
  • Plunge Turning Plunge Turning (2)
  • Profiling Profiling (2)
  • Threading Threading (2)
  • Turning Turning (2)
Type of Thread
Type of Thread
  • 60 (2)
  • BUTTRESS (2)
  • M (1)
  • UN (2)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (2)
  • Lightly Interrupted Cut (2)
  • Smooth Cut (2)
  • Varying Depth of Cut (2)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (2)
  • 2.0 (2)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.076 mm (2)
  • 0.08 mm (2)
  • 0.089 mm (2)
  • 0.09 mm (2)
  • 0.1 mm (2)
  • 0.102 mm (2)
  • 0.185 mm (1)
  • 0.19 mm (2)
  • 0.191 mm (2)
  • 0.202 mm (1)
  • 0.25 mm (1)
  • 0.254 mm (1)
  • 0.5 mm (2)
  • 0.75 mm (2)
  • 0.787 mm (2)
  • 1.0 mm (2)
  • 1.194 mm (2)
  • 1.25 mm (2)
  • 1.5 mm (2)
  • 1.588 mm (2)
  • 1.75 mm (2)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.003 in (2)
  • 0.0031 in (2)
  • 0.0035 in (2)
  • 0.004 in (2)
  • 0.0075 in (2)
  • 0.008 in (1)
  • 0.01 in (1)
  • 0.0197 in (2)
  • 0.0295 in (2)
  • 0.031 in (2)
  • 0.0394 in (2)
  • 0.047 in (2)
  • 0.0492 in (2)
  • 0.0591 in (2)
  • 0.0625 in (2)
  • 0.0689 in (2)
Corner Radius Min to Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K2885 (2)
  • K313 (2)
  • K420 (2)
  • K4H (1)
  • K68 (2)
  • KC250 (2)
  • KC5010 (2)
  • KC5025 (2)
  • KC5410 (2)
  • KC710 (2)
  • KC720 (2)
  • KC722 (2)
  • KC730 (2)
  • KC810 (2)
  • KC850 (2)
  • KC910 (1)
  • KC9110 (2)
  • KC9320 (2)
  • KC935 (2)
  • KC950 (2)
  • KCK20 (1)
  • KCK20B (2)
  • KCP10B (2)
  • KCP25B (2)
  • KCU10 (2)
  • KCU25 (2)
  • KT175 (2)
  • KT315 (2)
  • KU10T (2)
  • KU25T (2)
  • KU30T (2)
  • THM (2)
  • TN10P (1)
  • TN6010 (2)
  • TN6025 (2)
  • TN7110 (2)
  • WU10PT (1)
Hand Of Tool
Hand Of Tool
  • L (1)
  • R (1)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 in (2)
  • 2.229 in (2)
  • 3.5 in (2)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 mm (2)
  • 56.625 mm (2)
  • 88.9 mm (2)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
frontEnd
Cutting Width
Cutting Width
  • 0.5 mm (2)
  • 0.787 mm (2)
  • 0.8 mm (2)
  • 0.889 mm (2)
  • 0.991 mm (2)
  • 1.0 mm (2)
  • 1.041 mm (2)
  • 1.19 mm (2)
  • 1.194 mm (2)
  • 1.199 mm (1)
  • 1.2 mm (2)
  • 1.39 mm (2)
  • 1.397 mm (2)
  • 1.4 mm (2)
  • 1.473 mm (2)
  • 1.5 mm (2)
  • 1.56 mm (1)
  • 1.57 mm (1)
  • 1.575 mm (2)
  • 1.69 mm (2)
  • 1.7 mm (2)
  • 1.702 mm (2)
  • 1.75 mm (2)
  • 1.94 mm (2)
  • 1.95 mm (2)
  • 1.956 mm (2)
  • 2.0 mm (2)
  • 2.007 mm (2)
  • 2.2 mm (2)
  • 2.235 mm (2)
  • 2.24 mm (2)
  • 2.25 mm (2)
  • 2.388 mm (2)
  • 2.5 mm (2)
  • 2.74 mm (2)
  • 2.743 mm (2)
  • 2.75 mm (2)
  • 2.997 mm (2)
  • 3.0 mm (2)
  • 3.175 mm (2)
  • 3.18 mm (1)
  • 3.2 mm (2)
  • 3.245 mm (2)
  • 3.251 mm (2)
  • 3.27 mm (2)
  • 3.5 mm (2)
  • 3.73 mm (1)
  • 3.81 mm (2)
  • 3.84 mm (2)
Cutting Width Min to Cutting Width Max
Cutting Width
Cutting Width
  • 0.0197 in (2)
  • 0.031 in (2)
  • 0.0315 in (2)
  • 0.035 in (2)
  • 0.039 in (2)
  • 0.0394 in (2)
  • 0.041 in (2)
  • 0.047 in (2)
  • 0.0472 in (2)
  • 0.055 in (2)
  • 0.0551 in (2)
  • 0.058 in (2)
  • 0.0591 in (2)
  • 0.062 in (2)
  • 0.0669 in (2)
  • 0.067 in (2)
  • 0.0689 in (2)
  • 0.076 in (2)
  • 0.0768 in (2)
  • 0.077 in (2)
  • 0.0787 in (2)
  • 0.079 in (2)
  • 0.0866 in (2)
  • 0.088 in (2)
  • 0.0886 in (2)
  • 0.094 in (2)
  • 0.0984 in (2)
  • 0.108 in (2)
  • 0.1083 in (2)
  • 0.118 in (2)
  • 0.1181 in (2)
  • 0.125 in (2)
  • 0.126 in (2)
  • 0.1278 in (2)
  • 0.128 in (2)
  • 0.129 in (2)
  • 0.1378 in (2)
  • 0.147 in (1)
  • 0.15 in (2)
  • 0.151 in (2)
Cutting Width Min to Cutting Width Max
insertGeometry
Cutting Tool Material
Cutting Tool Material
  • H T (2)
  • H W (2)
other
Cutting Condition Material
Cutting Condition Material
  • H-All (2)
  • K-All (2)
  • M-All (2)
  • N-All (2)
  • P-All (2)
  • S-All (2)
Insert Hand
Insert Hand
  • L (1)
  • R (1)
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying 1- 2 of 2 results
Select Columns
Select Filters
Metric
Inch
Show
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number [CSMS] System Size Machine Side [F] F Dimension [F] F Dimension [H1] Cutting Height [H1] Cutting Height [L1] Tool Length [L1] Tool Length Gage Insert
3180674 KM16NSR220HPC KM16NSR220HPC KM16 10.0000 .3937 2.0000 .0787 20.0000 .7874 NG2R
    List price:
    $256.13 /each.
    Your price::
    Qty
    3180675 KM16NSL220HPC KM16NSL220HPC KM16 10.0000 .3937 2.0000 .0787 20.0000 .7874 NG2L
      List price:
      $256.13 /each.
      Your price::
      Qty
      List price:
      Discount: %
      Your price::
      Replacement This item is not available
      Replacement Product This item may be available through a distributor
      Qty

      Sold in pkg. of

      product-image
      Please adjust the following properties from

      ISO Catalog

      ANSI Catalog

      to find similar products.
      You are about to create a duplicate . Do you want to proceed?
      You are about to delete Do you want to proceed?
      What would you like to rename your to?
      Please enter a valid name
      Please enter a name for the duplicate
      Please enter a valid name
      You are about to add to your My Solutions page. Do you want to proceed?
      Please enter a valid name
      Send a copy of

      Please enter a valid Email
      Please enter a valid name

      We have found the following CAD Drawings

      Select the files you are looking for and download them all at once

      You should be logged to see your dashboard information
      The product/s () you were trying to add to the cart is/are not available, please contact customer service.
      item(s) successfully added to the cart
      View Cart