内部切削装置 • P 型夹持装置
内部切削装置 • P 型夹持装置
内部切削装置 • P 型夹持装置
内部切削装置 • P 型夹持装置

PDUN 93°

内部切削装置 • P 型夹持装置

Uses and application

  • Shank - PSCShank - PSC
  • 制造商规格: ISO 26623制造商规格: ISO 26623
  • Coolant: Through Coolant 1200 psi MaximumCoolant: Through Coolant 1200 psi Maximum
  • Coolant: Through Coolant 80 bar MaximumCoolant: Through Coolant 80 bar Maximum
Select Filters
Filters
View filters in
Metric
Inch
keyFilters
工件材料
工件材料
  • P (7)
    • P0
      低碳钢,长切屑 C < .25%;<125 HB;<530 N/mm^2 UTS (7)
    • P1
      低碳钢、短切屑 C < .25%;<125 HB;<530 N/mm^2 UTS (7)
    • P2
      中碳钢和高碳钢 C < .25%;<220 HB;<25 HRC;>530 N/mm^2 UTS (7)
    • P3
      合金钢和工具钢 C > .25%;<330 HB;<35 HRC;600-850 N/mm^2 UTS (7)
    • P4
      合金钢和工具钢 C > .25%;350-420 HB;35-43 HRC;850-1400 N/mm^2 UTS (7)
    • P5
      铁素体、马氏体和 PH 不锈钢 <330 HB;<35 HRC;600-900 N/mm^2 UTS (7)
    • P6
      高强度铁素体、马氏体和 PH 不锈钢 350-450 HB;35-43 HRC;900-2400 N/mm^2 UTS (7)
  • M 不锈钢 (7)
    • M1
      奥氏体不锈钢 130-200 HB;<600 N/mm^2 UTS (7)
    • M2
      高强度奥氏体不锈钢和铸造不锈钢 150-230 HB;<25 HRC; >600 N/mm^2 UTS (7)
    • M3
      双相不锈钢 135-275 HB;<30 HRC; 500-1200 N/mm^2 UTS (7)
  • K 铸铁 (7)
    • K1
      灰口铸铁 120-290 HB;<32 HRC; 125-500 N/mm^2 UTS (7)
    • K2
      中低强度 CGI 和球墨铸铁 130-260 HB;<28 HRC; <600 N/mm^2 UTS (7)
    • K3
      高强度球墨铸铁和奥氏体球墨铸铁 180-350 HB;<43 HRC; >600 N/mm^2 UTS (7)
  • N 非铁金属材料 (7)
    • N1
      铝型材 (7)
    • N2
      低硅铝合金和镁合金 硅 < 12.2% (7)
    • N4
      可机加工转位范围为 70 到 100 的铜基、黄铜基、锌基 (7)
    • N5
      尼龙、塑料、橡胶、酚醛塑料、树脂、玻璃纤维 (7)
    • N6
      碳、石墨复合材料、CFRP (6)
    • N7
      MMC (7)
  • S 高温合金 (7)
    • S1
      铁基耐热合金 160-260 HB;25-48 HRC;500-1200 N/mm^2 UTS (7)
    • S2
      钴基耐热合金 250-450 HB;25-48 HRC;1000-1450 N/mm^2 UTS (7)
    • S3
      镍基耐热合金 160-450 HB;<48 HRC; 600-1700 N/mm^2 UTS (7)
    • S4
      钛和钛合金 300-400 HB;33-43 HRC;900-1600 N/mm^2 UTS (7)
  • H 淬火材料 (6)
    • H1
      淬火材料 44-48 HRC (6)
    • H2
      淬火材料 48-55 HRC (6)
    • H3
      淬火材料 56-60 HRC (6)
    • H4
      淬火材料 >60 HRC (6)
应用
应用
  • Facing Facing (7)
  • ID Facing ID Facing (7)
  • Multiple Direction Cutting Multiple Direction Cutting (7)
  • Plunge Turning Plunge Turning (7)
  • Profiling Profiling (7)
  • TRN Boring TRN Boring (7)
  • Turning Turning (7)
切削条件
切削条件
  • Heavily Interrupted Cut (7)
  • Interrupted (6)
  • Lightly Interrupted Cut (7)
  • Smooth Cut (7)
  • Varying Depth of Cut (7)
每个刀片的切削刃
每个刀片的切削刃
  • 1.0 (6)
  • 2.0 (7)
  • 4.0 (7)
每个刀片的切削刃 Min to 每个刀片的切削刃 Max
总长 [L]
总长 [L]
  • 3.938 in (1)
  • 4.331 in (2)
  • 5.513 in (2)
  • 6.891 in (2)
总长 [L] Min to 总长 [L] Max
总长 [L]
总长 [L]
  • 100.0 mm (1)
  • 110.0 mm (2)
  • 140.0 mm (2)
  • 175.0 mm (2)
总长 [L] Min to 总长 [L] Max
cornerConfiguration
刀尖半径
刀尖半径
  • 0.004 in (7)
  • 0.008 in (1)
  • 0.014 in (6)
  • 0.016 in (7)
  • 0.031 in (7)
  • 0.047 in (7)
  • 0.063 in (6)
刀尖半径 Min to 刀尖半径 Max
刀尖半径
刀尖半径
  • 0.1 mm (7)
  • 0.2 mm (1)
  • 0.351 mm (6)
  • 0.4 mm (7)
  • 0.8 mm (7)
  • 1.201 mm (7)
  • 1.6 mm (6)
刀尖半径 Min to 刀尖半径 Max
application
最小切削深度
最小切削深度
最小进给
最小进给
切削刀具材质
切削刀具材质
  • 13E (6)
  • CL4 (6)
  • CM2 (6)
  • CM3 (6)
  • CPX (6)
  • CW2 (6)
  • CW2015 (6)
  • CW5025 (6)
  • HK1500 (6)
  • HT2 (7)
  • K090 (6)
  • K10M (6)
  • K10P (6)
  • K10U (6)
  • K15U (6)
  • K20K (6)
  • K25M (7)
  • K25P (6)
  • K313 (7)
  • K35P (6)
  • K68 (6)
  • KB1340 (1)
  • KB9610 (6)
  • KB9640 (1)
  • KBH10 (6)
  • KBH10B (6)
  • KBH20 (6)
  • KBH20B (6)
  • KC210 (6)
  • KC5010 (7)
  • KC5025 (7)
  • KC5410 (6)
  • KC5510 (7)
  • KC5525 (7)
  • KC730 (1)
  • KC7310 (7)
  • KC8050 (7)
  • KC810 (7)
  • KC850 (7)
  • KC9010 (7)
  • KC9025 (7)
  • KC910 (6)
  • KC9105 (7)
  • KC9110 (7)
  • KC9120 (7)
  • KC9125 (7)
  • KC9140 (7)
  • KC9145 (6)
  • KC9210 (6)
  • KC9215 (7)
  • KC9225 (7)
  • KC9240 (7)
  • KC9240NEW (7)
  • KC9245 (7)
  • KC9315 (7)
  • KC9320 (7)
  • KC9325 (7)
  • KC935 (7)
  • KC950 (6)
  • KC990 (7)
  • KCK05 (7)
  • KCK05B (7)
  • KCK15 (7)
  • KCK15B (7)
  • KCK20 (7)
  • KCK20B (7)
  • KCM15 (7)
  • KCM15B (7)
  • KCM25 (7)
  • KCM25B (7)
  • KCM35 (6)
  • KCM35B (6)
  • KCP05 (7)
  • KCP05B (7)
  • KCP10 (7)
  • KCP10B (7)
  • KCP25 (7)
  • KCP25B (7)
  • KCP25C (7)
  • KCP30 (7)
  • KCP30B (6)
  • KCP40 (6)
  • KCP40B (6)
  • KCPK05 (7)
  • KCS10B (7)
  • KCU10 (7)
  • KCU10B (7)
  • KCU25 (7)
  • KT125 (6)
  • KT175 (6)
  • KT315 (7)
  • KT325 (7)
  • KU10T (7)
  • KU30T (7)
  • KY1320 (6)
  • KY1615 (6)
  • KY3000 (6)
  • KY3500 (6)
  • KY4400 (6)
  • KYHK15B (6)
  • KYK35 (6)
  • NL200 (6)
  • NL250 (7)
  • NL300 (6)
  • NL920 (7)
  • PS5 (7)
  • SP0819 (6)
  • THM-X (6)
  • TN10P (7)
  • TN10U (6)
  • TN15M (6)
  • TN15U (6)
  • TN2000 (6)
  • TN20K (6)
  • TN20P (7)
  • TN30M (7)
  • TN30P (6)
  • TN4000 (6)
  • TN5015 (7)
  • TN5020 (7)
  • TN5105 (7)
  • TN5120 (7)
  • TN6010 (6)
  • TN6025 (6)
  • TN7005 (7)
  • TN7010 (7)
  • TN7015 (7)
  • TN7025 (7)
  • TN7035 (6)
  • TN7105 (7)
  • TN7110 (7)
  • TN7115 (7)
  • TN7125 (7)
  • TN7135 (6)
  • TN8025 (7)
  • TTI15 (7)
  • TTS (6)
  • TTX (6)
  • WBH10C (6)
  • WBH20P (6)
  • WBH25U (6)
  • WBK40U (1)
  • WBK45U (6)
  • WK05CT (7)
  • WK15CT (6)
  • WK20CT (7)
  • WM15CT (7)
  • WM25CT (7)
  • WM35CT (7)
  • WP15CT (7)
  • WP20TT (1)
  • WP25CT (7)
  • WP35CT (7)
  • WS10PT (7)
  • WS25PT (7)
  • WU10HT (7)
  • WU10PT (7)
  • WU25PT (7)
刀具手式
刀具手式
  • L (3)
  • R (4)
修光刃刀片
修光刃刀片
  • N (7)
  • Y (7)
F 尺寸
F 尺寸
  • 17.0 mm (1)
  • 22.0 mm (2)
  • 27.0 mm (2)
  • 35.0 mm (2)
F 尺寸 Min to F 尺寸 Max
F 尺寸
F 尺寸
  • 0.669 in (1)
  • 0.866 in (2)
  • 1.063 in (2)
  • 1.379 in (2)
F 尺寸 Min to F 尺寸 Max
最小轴向凹槽直径
最小轴向凹槽直径
  • 32.0 mm (1)
  • 40.0 mm (2)
  • 50.0 mm (2)
  • 63.0 mm (2)
最小轴向凹槽直径 Min to 最小轴向凹槽直径 Max
最小轴向凹槽直径
最小轴向凹槽直径
  • 1.26 in (1)
  • 1.575 in (2)
  • 1.969 in (2)
  • 2.48 in (2)
最小轴向凹槽直径 Min to 最小轴向凹槽直径 Max
最大镗孔深度
最大镗孔深度
  • 2.914 in (1)
  • 3.307 in (2)
  • 4.529 in (2)
  • 5.984 in (2)
最大镗孔深度 Min to 最大镗孔深度 Max
最大镗孔深度
最大镗孔深度
  • 74.0 mm (1)
  • 84.0 mm (2)
  • 115.0 mm (2)
  • 152.0 mm (2)
最大镗孔深度 Min to 最大镗孔深度 Max
insertGeometry
切削刀具材料
切削刀具材料
  • B H (7)
  • B L (6)
  • C A (6)
  • C N (6)
  • D P (6)
  • H T (7)
  • H W (7)
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying 1- 7 of 7 results
Select Columns
Select Filters
Metric
Inch
Show
Metric
Inch
SAP 材料编号 ISO 目录编号 ANSI 目录编号 [L4] 最大镗削深度 [L4] 最大镗削深度 [D2] 工件侧钻体直径 1 [D2] 工件侧钻体直径 1 Gage 刀片 [L1] 刀具长度 [L1] 刀具长度 [DM] 最小镗孔直径 [DM] 最小镗孔直径 [F] F 尺寸 [F] F 尺寸 重量(千克)
6342959 PSC63S25HPDUNR11 PSC63S25HPDUNR11 74 2.913 25 .9843 DN..110408/DN..332 100 3.937 32 1.259 17 .6693 1.26
    List price:
    $606.87 /each
    Your price::
    Qty
    6342956 PSC63S32JPDUNL15 PSC63S32JPDUNL15 84 3.307 32 1.259 DN..150608/DN..442 110 4.33 40 1.574 22 .8661 1
      List price:
      $606.87 /each
      Your price::
      Qty
      6342960 PSC63S32JPDUNR15 PSC63S32JPDUNR15 84 3.307 32 1.259 DN..150608/DN..442 110 4.33 40 1.574 22 .8661 1
        List price:
        $606.87 /each
        Your price::
        Qty
        6342957 PSC63S40LPDUNL15 PSC63S40LPDUNL15 115 4.527 40 1.574 DN..150608/DN..442 140 5.511 50 1.968 27 1.063 1
          List price:
          $606.87 /each
          Your price::
          Qty
          6342961 PSC63S40LPDUNR15 PSC63S40LPDUNR15 115 4.527 40 1.574 DN..150608/DN..442 140 5.511 50 1.968 27 1.063 1
            List price:
            $606.87 /each
            Your price::
            Qty
            6342958 PSC63S50XPDUNL15 PSC63S50XPDUNL15 152 5.984 50 1.968 DN..150608/DN..442 175 6.889 63 2.48 35 1.378 2.7
              List price:
              $606.87 /each
              Your price::
              Qty
              6342962 PSC63S50XPDUNR15 PSC63S50XPDUNR15 152 5.984 50 1.968 DN..150608/DN..442 175 6.889 63 2.48 35 1.378 2.7
                List price:
                $606.87 /each
                Your price::
                Qty
                List price:
                Discount: %
                Your price::
                Replacement This item is no longer available
                Replacement Product Please contact customer service for assistance
                Qty

                Sold in pkg. of

                product-image
                Please adjust the following properties from

                ISO Catalog

                ANSI Catalog

                to find similar products.

                The following files are available

                Please select a file to download

                Models

                Product data

                You are about to create a duplicate . Do you want to proceed?
                You are about to permanently delete Do you want to proceed?
                You are about to permanently delete and all items within that folder. Do you want to proceed?
                Are you sure you want to permanently delete these items?
                What would you like to rename your to?

                A folder with the name already exists .

                Please enter a valid name
                Please enter a name for the duplicate
                Please enter a valid name
                You are about to add to your My Solutions page. Do you want to proceed?

                A folder with the name already exists .

                Please enter a valid name
                Send a copy of

                Oops, you have used your own email address! Please enter another email address to proceed.

                An active user does not exist under that email address. Please Click Here , to send a registration invitation to


                Please enter a valid Email
                Please enter a valid name
                You should be logged to see your dashboard information
                Session expired due to inactivity, please login again
                The product/s () you were trying to add to the cart is/are not available, please contact customer service
                item(s) successfully added to the cart
                View Cart
                DOWNLOAD TYPE:



                . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

                Minimum quantity should be

                SAP Material Number ISO Catalog Grade    
                Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

                You are about to leave the Solution building process.

                Are you sure you want to leave?