successfully added to cart
View Cart
P 型夹持装置
P 型夹持装置
P 型夹持装置
P 型夹持装置

PWLN 95°

P 型夹持装置

Uses and application

  • 冷却方式- 贯通式冷却  100 bar (1500 psi)  最大值冷却方式- 贯通式冷却 100 bar (1500 psi) 最大值
  • Shank: KM4X™Shank: KM4X™
  • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum

Workpiece Materials

P Steel
M Stainless Steel
K Cast Iron
N Non-Ferrous
S High-Temp Alloys
H Hardened Materials
Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (8)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (8)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (8)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (8)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (8)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (8)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (8)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (8)
  • M Stainless Steel (8)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (8)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (8)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (8)
  • K Cast Iron (8)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (8)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (8)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (8)
  • N Non-Ferrous Materials (8)
    • N1
      Wrought Aluminum
      (8)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (8)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (8)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (8)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (8)
    • N6
      Carbon, Graphite Composites, CFRP
      (8)
    • N7
      MMC's
      (8)
  • S High-Temp Alloys (8)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (8)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (8)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (8)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (8)
  • H Hardened Materials (8)
    • H1
      Hardened Materials 44-48 HRC
      (8)
    • H2
      Hardened Materials 48-55 HRC
      (8)
    • H3
      Hardened Materials 56-60 HRC
      (8)
    • H4
      Hardened Materials >60 HRC
      (8)
Applications
  • Facing Facing (8)
  • ID Facing ID Facing (8)
  • Multiple Direction Cutting Multiple Direction Cutting (8)
  • Profiling Profiling (8)
  • TRN Boring TRN Boring (8)
  • Turning Turning (8)
Cutting Condition
  • Heavily Interrupted Cut (8)
  • Interrupted (8)
  • Lightly Interrupted Cut (8)
  • Smooth Cut (8)
  • Varying Depth of Cut (8)
Cutting Edges Per Insert
  • 1.0 (8)
  • 3.0 (8)
  • 6.0 (8)
to
cornerConfiguration
Corner Radius
  • 0.1 (8)
  • 0.2 (8)
  • 0.397 (8)
  • 0.4 (8)
  • 0.6 (8)
  • 0.794 (8)
  • 0.8 (8)
  • 1.191 (8)
  • 1.2 (8)
  • 1.588 (8)
  • 1.6 (8)
to
Corner Radius
  • 0.004 (8)
  • 0.008 (8)
  • 0.0156 (8)
  • 0.016 (8)
  • 0.031 (8)
  • 0.0312 (8)
  • 0.0313 (8)
  • 0.0469 (8)
  • 0.047 (8)
  • 0.0625 (8)
  • 0.063 (8)
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • CW5025 (8)
  • HK1500 (8)
  • K10M (8)
  • K10P (8)
  • K10U (8)
  • K15U (8)
  • K20K (8)
  • K25M (8)
  • K25P (8)
  • K313 (8)
  • K35P (8)
  • KB1610 (8)
  • KB5610 (8)
  • KB9610 (8)
  • KB9640 (8)
  • KBH10 (8)
  • KBH20 (8)
  • KC5010 (8)
  • KC5025 (8)
  • KC5410 (8)
  • KC5510 (8)
  • KC5525 (8)
  • KC720 (8)
  • KC730 (8)
  • KC7310 (8)
  • KC732 (8)
  • KC8050 (8)
  • KC810 (8)
  • KC850 (8)
  • KC9010 (8)
  • KC9025 (8)
  • KC910 (8)
  • KC9105 (8)
  • KC9110 (8)
  • KC9120 (8)
  • KC9125 (8)
  • KC9140 (8)
  • KC9145 (8)
  • KC9215 (8)
  • KC9225 (8)
  • KC9240 (8)
  • KC9240NEW (8)
  • KC9245 (8)
  • KC9315 (8)
  • KC9320 (8)
  • KC9325 (8)
  • KC935 (8)
  • KC950 (8)
  • KC990 (8)
  • KCK05 (8)
  • KCK05B (8)
  • KCK15 (8)
  • KCK15B (8)
  • KCK20 (8)
  • KCK20B (8)
  • KCM15 (8)
  • KCM15B (8)
  • KCM25 (8)
  • KCM25B (8)
  • KCM35 (8)
  • KCM35B (8)
  • KCP05 (8)
  • KCP05B (8)
  • KCP10 (8)
  • KCP10B (8)
  • KCP25 (8)
  • KCP25B (8)
  • KCP30 (8)
  • KCP30B (8)
  • KCP40 (8)
  • KCP40B (8)
  • KCPK05 (8)
  • KCS10B (8)
  • KCU10 (8)
  • KCU25 (8)
  • KD1400 (8)
  • KD1425 (8)
  • KT315 (8)
  • KU10T (8)
  • KU30T (8)
  • KY1310 (8)
  • KY1320 (8)
  • KY3400 (8)
  • KY3500 (8)
  • KY4400 (8)
  • KYHK15B (8)
  • KYK10 (8)
  • KYK25 (8)
  • KYK35 (8)
  • KYS30 (8)
  • NL250 (8)
  • NL400 (8)
  • NL920 (8)
  • SP0819 (8)
  • SP3019 (8)
  • SP4019 (8)
  • TN10P (8)
  • TN10U (8)
  • TN15M (8)
  • TN15U (8)
  • TN2000 (8)
  • TN20K (8)
  • TN20P (8)
  • TN30M (8)
  • TN30P (8)
  • TN4000 (8)
  • TN5015 (8)
  • TN5020 (8)
  • TN5105 (8)
  • TN5120 (8)
  • TN6025 (8)
  • TN7005 (8)
  • TN7010 (8)
  • TN7015 (8)
  • TN7025 (8)
  • TN7035 (8)
  • TN7105 (8)
  • TN7110 (8)
  • TN7115 (8)
  • TN7125 (8)
  • TN7135 (8)
  • TN8025 (8)
  • WBH10C (8)
  • WBH10U (8)
  • WBH20P (8)
  • WDN25U (8)
  • WK05CT (8)
  • WK15CT (8)
  • WK20CT (8)
  • WM15CT (8)
  • WM25CT (8)
  • WM35CT (8)
  • WP05CT (8)
  • WP15CT (8)
  • WP25CT (8)
  • WP35CT (8)
  • WS10PT (8)
  • WS25PT (8)
  • WU10HT (8)
  • WU10PT (8)
  • WU25PT (8)
Hand Of Tool
  • L (4)
  • R (4)
Wiper Insert
  • N (8)
  • Y (8)
Minimum Axial Groove Diameter
  • 1.26 (2)
  • 1.575 (2)
  • 1.969 (2)
  • 2.48 (2)
to
Minimum Axial Groove Diameter
  • 32.0 (2)
  • 40.0 (2)
  • 50.0 (2)
  • 63.0 (2)
to
Maximum Bore Depth
  • 88.33 (2)
  • 112.27 (2)
  • 113.92 (1)
  • 114.05 (1)
  • 144.05 (2)
to
Maximum Bore Depth
  • 3.477 (2)
  • 4.42 (2)
  • 4.485 (1)
  • 4.49 (1)
  • 5.671 (2)
to
insertGeometry
Cutting Tool Material
  • B H (8)
  • B L (8)
  • C A (8)
  • C N (8)
  • D P (8)
  • H T (8)
  • H W (8)
other
Cutting Condition Material
  • H-All (8)
  • K-All (8)
  • M-All (8)
  • N-All (8)
  • P-All (8)
  • S-All (8)
  • S2 (8)
Over All Length [L]
  • 125.0 (2)
  • 140.0 (4)
  • 170.0 (2)
to
Over All Length [L]
  • 4.921 (2)
  • 5.512 (4)
  • 6.693 (2)
to
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying 1- 8 of 8 results
Select Columns
Select Filters
Metric
Inch
Show
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number [D2] Body Diameter 1 Workpiece Side [D2] Body Diameter 1 Workpiece Side [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
5589485 KM4X63S25KPWLNR08 KM4X63S25KPWLNR08 25.0000 .9840 32.0000 1.260 17.0000 .6690 88.3300 3.477 125.0000 4.921 WN..080408/WN..432 1.11 2.45
    List price:
    $529.06 /each.
    Your price::
    Qty
    5589478 KM4X63S40LPWLNL08 KM4X63S40LPWLNL08 40.0000 1.575 50.0000 1.969 27.0000 1.063 113.9200 4.485 140.0000 5.512 WN..080408/WN..432 1.69 3.74
      List price:
      $529.06 /each.
      Your price::
      Qty
      5589484 KM4X63S25KPWLNL08 KM4X63S25KPWLNL08 25.0000 .9840 32.0000 1.260 17.0000 .6690 88.3300 3.477 125.0000 4.921 WN..080408/WN..432 1.11 2.45
        List price:
        $529.06 /each.
        Your price::
        Qty
        5589473 KM4X63S50PPWLNR08 KM4X63S50PPWLNR08 50.0000 1.969 63.0000 2.480 35.0000 1.378 144.0500 5.671 170.0000 6.693 WN..080408/WN..432 2.63 5.81
          List price:
          $529.06 /each.
          Your price::
          Qty
          5589479 KM4X63S40LPWLNR08 KM4X63S40LPWLNR08 40.0000 1.575 50.0000 1.969 27.0000 1.063 114.0500 4.490 140.0000 5.512 WN..080408/WN..432 1.69 3.74
            List price:
            $529.06 /each.
            Your price::
            Qty
            5589472 KM4X63S50PPWLNL08 KM4X63S50PPWLNL08 50.0000 1.969 63.0000 2.480 35.0000 1.378 144.0500 5.671 170.0000 6.693 WN..080408/WN..432 2.64 5.81
              List price:
              $529.06 /each.
              Your price::
              Qty
              5589467 KM4X63S32LPWLNR08 KM4X63S32LPWLNR08 32.0000 1.260 40.0000 1.575 22.0000 .8660 112.2700 4.420 140.0000 5.512 WN..080408/WN..432 1.34 2.95
                List price:
                $529.06 /each.
                Your price::
                Qty
                5589466 KM4X63S32LPWLNL08 KM4X63S32LPWLNL08 32.0000 1.260 40.0000 1.575 22.0000 .8660 112.2700 4.420 140.0000 5.512 WN..080408/WN..432 1.34 2.95
                  List price:
                  $529.06 /each.
                  Your price::
                  Qty
                  List price:
                  Discount: %
                  Your price::
                  Replacement This item is not available
                  Replacement Product This item may be available through a distributor
                  Qty

                  Sold in pkg. of

                  product-image
                  Please adjust the following properties from

                  ISO Catalog

                  ANSI Catalog

                  to find similar products.
                  If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                  You are about to create a duplicate . Do you want to proceed?
                  You are about to delete Do you want to proceed?
                  What would you like to rename your to?
                  Please enter a valid name
                  Please enter a name for the duplicate
                  Please enter a valid name
                  You are about to add to your My Solutions page. Do you want to proceed?
                  Please enter a valid name
                  Send a copy of

                  Please enter a valid Email
                  Please enter a valid name

                  We have found the following CAD Drawings

                  Select the files you are looking for and download them all at once

                  You should be logged to see your dashboard information
                  The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                  item(s) successfully added to the cart
                  View Cart