New Customer
Are you new to WIDIA? Create an account and get started.
Create AccountRegistered Customer
Already have an account? Sign in.
Sign InSold-to Account
You are currently using the following account for your cart and purchases:
New Customer
Are you new to WIDIA? Create an account and get started.
Create AccountRegistered Customer
Already have an account? Sign in.
Sign InSold-to Account
You are currently using the following account for your cart and purchases:
successfully added to cart
View Cart
View Cart
SDMX-MH • SD1204..WK15CM
刀片 • SD1204..
Workpiece Materials
P
Steel
M
Stainless Steel
K
Cast Iron
S
High-Temp Alloys
Filters and Columns
Filters
Filters
Filters
View filters in
Metric
Inch
Select First Choice
-
IN (4)
-
US (1)
Workpiece Material
-
P Steel (10)
-
P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(10)
-
P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(10)
-
P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(10)
-
P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(10)
-
P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(10)
-
P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(10)
-
P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(10)
-
-
M Stainless Steel (10)
-
M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(10)
-
M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(10)
-
M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(10)
-
-
K Cast Iron (13)
-
K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(13)
-
K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(13)
-
K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(13)
-
-
S High-Temp Alloys (6)
-
S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(3)
-
S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(3)
-
S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(3)
-
S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(6)
-
Cutting Edges Per Insert
-
4.0 (13)
to
Corner Radius
-
0.8 (4)
-
1.2 (6)
-
1.6 (3)
to
Corner Radius
-
0.0313 (4)
-
0.0469 (6)
-
0.0625 (3)
to
application
Grade Of Cutting Tool
-
TN6520 (1)
-
TN6525 (1)
-
TN6540 (3)
-
TN7535 (3)
-
WK15CM (2)
-
WP35CM (3)
Wiper Insert
-
N (13)
frontEnd
Insert Shape
-
S-SQUARE 90 (13)
insertGeometry
Shape
-
S-SQUARE 90 (13)
Insert IC Size
-
0.5 (13)
to
Insert IC Size
-
12.7 (13)
to
Cutting Edge Length
-
0.5 (13)
to
Cutting Edge Length
-
12.7 (13)
to
Chip Breaker CBMD
-
MH (13)
Cutting Tool Material
-
H W (13)
Tolerance Class
-
M (13)
other
Grade
-
TN6520 (1)
-
TN6525 (1)
-
TN6540 (3)
-
TN7535 (3)
-
WK15CM (2)
-
WP35CM (3)
Platform
-
M690 (3)
-
M690 Series (10)
Tool Unit
-
I (13)
-
M (13)
kmtConfigurable
-
false (13)
Insert Hand
-
R (13)
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying
1- 10
of 13 results
Metric
Inch
Show
Metric
Inch
| SAP Material Number | ISO Catalog Number | ANSI Catalog Number | First Choice | Grade | Cutting Edges per Insert | [D] Insert IC Size | [D] Insert IC Size | [L10] Insert Cutting Edge Length | [L10] Insert Cutting Edge Length | [S] Insert Thickness | [S] Insert Thickness | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 5427427 | SDMX120408RMH | SDMX432RMH | WK15CM | 4 | 12.7000 | .5000 | 12.7000 | .5000 | 4.7600 | .1875 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$15.44
/each.
Your price::
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 5427428 | SDMX120412RMH | SDMX433RMH | WK15CM | 4 | 12.7000 | .5000 | 12.7000 | .5000 | 4.7600 | .1875 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$15.44
/each.
Your price::
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3950592 | SDMX120408RMH | SDMX432RMH | TN6540 | 4 | 12.7000 | .5000 | 12.7000 | .5000 | 4.7600 | .1875 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$15.44
/each.
Your price::
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3950614 | SDMX120412RMH | SDMX433RMH | TN6520 | 4 | 12.7000 | .5000 | 12.7000 | .5000 | 4.7600 | .1875 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$15.44
/each.
Your price::
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3950595 | SDMX120408RMH | SDMX432RMH | TN7535 | 4 | 12.7000 | .5000 | 12.7000 | .5000 | 4.7600 | .1875 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$15.44
/each.
Your price::
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3950601 | SDMX120412RMH | SDMX433RMH | TN6525 | 4 | 12.7000 | .5000 | 12.7000 | .5000 | 4.7600 | .1875 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$15.44
/each.
Your price::
Qty
Sold in pkg. of 5 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3950603 | SDMX120412RMH | SDMX433RMH | TN6540 | 4 | 12.7000 | .5000 | 12.7000 | .5000 | 4.7600 | .1875 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$15.44
/each.
Your price::
Qty
Sold in pkg. of 5 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3950606 | SDMX120412RMH | SDMX433RMH | TN7535 | 4 | 12.7000 | .5000 | 12.7000 | .5000 | 4.7600 | .1875 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$15.44
/each.
Your price::
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3950607 | SDMX120416RMH | SDMX434RMH | TN6540 | 4 | 12.7000 | .5000 | 12.7000 | .5000 | 4.7600 | .1875 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$15.44
/each.
Your price::
Qty
Sold in pkg. of 5 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3950609 | SDMX120416RMH | SDMX434RMH | TN7535 | 4 | 12.7000 | .5000 | 12.7000 | .5000 | 4.7600 | .1875 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$15.44
/each.
Your price::
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 6842093 | SDMX120412RMH | SDMX433RMH | WP35CM | 4 | 12.7000 | .5000 | 12.7000 | .5000 | 4.7600 | .1875 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$17.89
/each.
Your price::
Qty
Sold in pkg. of 5 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 6842069 | SDMX120408RMH | SDMX432RMH | WP35CM | 4 | 12.7000 | .5000 | 12.7000 | .5000 | 4.7600 | .1875 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$17.89
/each.
Your price::
Qty
Sold in pkg. of 5 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 6842070 | SDMX120416RMH | SDMX434RMH | WP35CM | 4 | 12.7000 | .5000 | 12.7000 | .5000 | 4.7600 | .1875 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$17.89
/each.
Your price::
Qty
Sold in pkg. of 5 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
List price:
Discount: %
Replacement
This item is not available
Replacement Product This item may be available through a distributor
Replacement Product This item may be available through a distributor
Qty
Sold in pkg. of
Grades
-
TN5515
涂层硬质合金材质TN5515的涂层为MT-CVD-TiN-TiCN-Al203材料。在韧性和耐磨性之间有很好的平衡。适用于各种铸铁材料的轻型加工和一般加工。
K Cast Iron -
TN6520涂层硬质合金材质TN6520的涂层为PVD-TiAlN复合涂层。适用于各种铸铁材料的轻型加工和一般加工。
K Cast Iron -
TN6525
涂层硬质合金材质TN6525的涂层为PVD-TiAlN复合涂层。适用于钢质材料和高强度球墨铸铁材料的轻型加工和一般加工。
P SteelM Stainless SteelK Cast Iron -
TN6540
涂层硬质合金材质TN6540的涂层为PVD-TiAlN复合涂层，适用于一般加工和重型加工。适用于各类钢质材料和球墨铸铁材料的加工。
P SteelM Stainless SteelK Cast IronS High-Temp Alloys -
TN7525
涂层硬质合金材质TN7525的涂层为MT-CVD-TiN-TiCN-Al203-TiN材料。适用于各种钢材料和球墨铸铁材料的轻型加工和一般加工。
P SteelM Stainless Steel -
TN7535
MT-CVD/CVD — TiN-TiCN-Al2O3 涂层硬质合金。适用于钢材料和球墨铸铁材料的一般加工和重型加工。
P SteelM Stainless SteelK Cast Iron -
WK15CMK Cast Iron
-
WP35CMP SteelM Stainless SteelK Cast IronS High-Temp Alloys
Insert Selection Guide
| Material Group | LightMachining | GeneralPurpose | HeavyMachining | |||
| Geometry | Grade | Geometry | Grade | Geometry | Grade | |
| P1–P2 | .E..ML | TN6540 | .S..MM | TN6540 | .S..MH | TN6540 |
| P3–P4 | .E..ML | TN7535 | .S..MM | TN6540 | .S..MH | TN6540 |
| P5–P6 | .E..ML | TN7535 | .S..MM | TN6540 | .S..MH | TN6540 |
| M1–M2 | .E..ML | TN6540 | .S..MM | TN6540 | .S..MH | TN6540 |
| M3 | .E..ML | TN7535 | .S..MM | TN7535 | .S..MH | TN7535 |
| K1–K2 | .E..ML | WK15CM | .E..ML | WK15CM | .S..MH | WK15CM |
| K3 | .E..ML | WK15CM | .S..MM | TN6525 | .S..MH | TN6525 |
| N1–N2 | .ALP | THM-U | .E..ML | THM-U | .S..ML | THM-U |
| N3 | .ALP | THM-U | .E..ML | THM-U | .S..ML | THM-U |
| S1–S2 | .E..ML | TN6540 | .S..MM | TN6540 | .S..MM | TN6540 |
| S3 | .E..ML | TN6540 | .S..MM | WS30PM | .S..MM | TN6540 |
| S4 | .E..ML | TN6540 | .S..MM | WS30PM | .S..MM | TN6540 |
| H1 | .S..MM | WS30PM | .S..MM | WS30PM | .S..MM | WS30PM |
Insert Selection Guide
| Material Group | LightMachining | GeneralPurpose | HeavyMachining | |||
| Geometry | Grade | Geometry | Grade | Geometry | Grade | |
| P1–P2 | .E..ML | TN6540 | .S..MM | TN6540 | .S..MH | TN6540 |
| P3–P4 | .E..ML | TN7535 | .S..MM | TN6540 | .S..MH | TN6540 |
| P5–P6 | .E..ML | TN7535 | .S..MM | TN6540 | .S..MH | TN6540 |
| M1–M2 | .E..ML | TN6540 | .S..MM | TN6540 | .S..MH | TN6540 |
| M3 | .E..ML | TN7535 | .S..MM | TN7535 | .S..MH | TN7535 |
| K1–K2 | .E..ML | WK15CM | .E..ML | WK15CM | .S..MH | WK15CM |
| K3 | .E..ML | WK15CM | .S..MM | WK15CM | .S..MH | WK15CM |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | .E..ML | TN6540 | .S..MM | TN6540 | .S..MM | TN6540 |
| S3 | .E..ML | TN6540 | .S..MM | TN6540 | .S..MM | TN6540 |
| S4 | .E..ML | TN6540 | .S..MM | TN6540 | .S..MM | TN6540 |
| H1 | .S..MM | TN6540 | .S..MM | TN6540 | .S..MM | TN6540 |
推荐初始进给率 [毫米]
| Insert Geometry | Programmed Feed per Tooth (fz) as a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40100% | ||||||||||||
| .F..ALP | 0,12 | 0,23 | 0,46 | 0,08 | 0,17 | 0,33 | 0,06 | 0,13 | 0,25 | 0,06 | 0,11 | 0,22 | 0,05 | 0,10 | 0,20 | .F..ALP |
| .E..ML | 0,12 | 0,35 | 0,58 | 0,08 | 0,25 | 0,42 | 0,06 | 0,19 | 0,31 | 0,06 | 0,17 | 0,27 | 0,05 | 0,15 | 0,25 | .E..ML |
| .S..MM | 0,12 | 0,42 | 0,70 | 0,08 | 0,30 | 0,50 | 0,06 | 0,23 | 0,38 | 0,06 | 0,20 | 0,33 | 0,05 | 0,18 | 0,30 | .S..MM |
| .S..MH | 0,23 | 0,54 | 0,85 | 0,17 | 0,39 | 0,61 | 0,13 | 0,29 | 0,46 | 0,11 | 0,25 | 0,40 | 0,10 | 0,23 | 0,36 | .S..MH |
| LightMachining | GeneralPurpose | HeavyMachining |
推荐初始进给率 [毫米]
| Insert Geometry | Programmed Feed per Tooth (fz) as a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40100% | ||||||||||||
| .F..ALP | 0,12 | 0,23 | 0,46 | 0,08 | 0,17 | 0,33 | 0,06 | 0,13 | 0,25 | 0,06 | 0,11 | 0,22 | 0,05 | 0,10 | 0,20 | .F..ALP |
| .E..ML | 0,12 | 0,35 | 0,58 | 0,08 | 0,25 | 0,42 | 0,06 | 0,19 | 0,31 | 0,06 | 0,17 | 0,27 | 0,05 | 0,15 | 0,25 | .E..ML |
| .S..MM | 0,12 | 0,42 | 0,70 | 0,08 | 0,30 | 0,50 | 0,06 | 0,23 | 0,38 | 0,06 | 0,20 | 0,33 | 0,05 | 0,18 | 0,30 | .S..MM |
| .S..MH | 0,23 | 0,54 | 0,85 | 0,17 | 0,39 | 0,61 | 0,13 | 0,29 | 0,46 | 0,11 | 0,25 | 0,40 | 0,10 | 0,23 | 0,36 | .S..MH |
| LightMachining | GeneralPurpose | HeavyMachining |
Recommended Starting Feeds [IPT]
| Insert Geometry | Programmed Feed per Tooth (fz) as a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40100% | ||||||||||||
| .F..ALP | .005 | .009 | .019 | .003 | .007 | .013 | .003 | .005 | .010 | .002 | .004 | .009 | .002 | .004 | .008 | .F..ALP |
| .E..ML | .005 | .014 | .022 | .003 | .010 | .016 | .003 | .007 | .012 | .002 | .006 | .010 | .002 | .006 | .010 | .E..ML |
| .S..MM | .005 | .016 | .027 | .003 | .012 | .020 | .003 | .009 | .015 | .002 | .008 | .013 | .002 | .007 | .012 | .S..MM |
| .S..MH | .009 | .021 | .033 | .007 | .015 | .024 | .005 | .011 | .018 | .004 | .010 | .016 | .004 | .009 | .014 | .S..MH |
| LightMachining | GeneralPurpose | HeavyMachining |
Recommended Starting Feeds [IPT]
| Insert Geometry | Programmed Feed per Tooth (fz) as a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40100% | ||||||||||||
| .E..ML | .007 | .019 | .032 | .005 | .014 | .023 | .004 | .010 | .017 | .003 | .009 | .015 | .003 | .008 | .014 | .E..ML |
| .S..MM | .008 | .021 | .035 | .006 | .015 | .025 | .004 | .011 | .019 | .004 | .010 | .016 | .003 | .009 | .015 | .S..MM |
| .S..MH | .009 | .023 | .037 | .007 | .017 | .027 | .005 | .013 | .020 | .004 | .011 | .017 | .004 | .010 | .016 | .S..MH |
| LightMachining | GeneralPurpose | HeavyMachining |
推荐初始切削速度 [米/分钟]
| Material Group | TN2510 | TN6520 | TN6525 | TN6540 | TN7525 | |||||||||||
| P | 0 | – | – | – | – | – | – | 340 | 265 | 235 | 300 | 235 | 200 | 340 | 260 | 235 |
| 1 | 550 | 485 | 450 | – | – | – | 340 | 265 | 235 | 300 | 235 | 200 | 340 | 260 | 235 | |
| 2 | 340 | 310 | 275 | – | – | – | 265 | 210 | 180 | 210 | 160 | 140 | 260 | 210 | 180 | |
| 3 | 310 | 275 | 255 | – | – | – | 235 | 180 | 155 | 180 | 140 | 115 | 235 | 180 | 155 | |
| 4 | 230 | 215 | 190 | – | – | – | 195 | 140 | 120 | 150 | 110 | 90 | 195 | 140 | 120 | |
| 5 | 275 | 250 | 230 | – | – | – | 260 | 195 | 165 | 200 | 150 | 125 | 260 | 195 | 165 | |
| 6 | 190 | 170 | 145 | – | – | – | 170 | 135 | 110 | 135 | 100 | 85 | 170 | 135 | 110 | |
| M | 1 | 225 | 200 | 175 | – | – | – | 160 | 100 | 65 | 110 | 65 | 50 | 205 | 185 | 155 |
| 2 | 205 | 175 | 160 | – | – | – | 100 | 65 | 40 | 65 | 40 | 35 | 185 | 160 | 140 | |
| 3 | 160 | 145 | 125 | – | – | – | 105 | 65 | 45 | 70 | 40 | 35 | 145 | 130 | 115 | |
| K | 1 | 350 | 300 | 250 | 375 | 265 | 190 | 230 | 205 | 185 | 185 | 170 | 150 | 315 | 235 | 200 |
| 2 | 300 | 250 | 210 | 325 | 210 | 160 | 180 | 160 | 150 | 145 | 130 | 115 | 270 | 200 | 165 | |
| 3 | 250 | 210 | 165 | 250 | 190 | 135 | 150 | 135 | 120 | 130 | 120 | 105 | 200 | 165 | 140 | |
| N | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | – | – | – | 40 | 30 | 25 | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | 20 | 15 | 10 | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | 60 | 35 | 25 | – | – | – | |
| 4 | – | – | – | – | – | – | – | – | – | 50 | 25 | 20 | – | – | – | |
| H | 1 | 115 | 90 | 60 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | 115 | 90 | 60 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | 85 | 65 | 45 | – | – | – | – | – | – | – | – | – | – | – | – | |
| Material Group | TN7535 | WK15CM | WS30PM | TTI25 | THM-U | |||||||||||
| P | 0 | 455 | 395 | 370 | – | – | – | – | – | – | 360 | 300 | 250 | – | – | – |
| 1 | 455 | 395 | 370 | – | – | – | – | – | – | 360 | 300 | 250 | – | – | – | |
| 2 | 280 | 255 | 230 | – | – | – | – | – | – | 260 | 210 | 180 | – | – | – | |
| 3 | 255 | 230 | 205 | – | – | – | – | – | – | 260 | 210 | 180 | – | – | – | |
| 4 | 190 | 175 | 160 | – | – | – | – | – | – | 220 | 180 | 150 | – | – | – | |
| 5 | 260 | 230 | 210 | – | – | – | – | – | – | 265 | 195 | 165 | – | – | – | |
| 6 | 160 | 135 | 110 | – | – | – | – | – | – | 120 | 90 | 75 | – | – | – | |
| M | 1 | 205 | 185 | 155 | – | – | – | 225 | 200 | 185 | 400 | 260 | 180 | – | – | – |
| 2 | 185 | 160 | 140 | – | – | – | 205 | 180 | 145 | 270 | 170 | 120 | – | – | – | |
| 3 | 145 | 130 | 115 | – | – | – | 155 | 135 | 105 | 265 | 175 | 120 | – | – | – | |
| K | 1 | 295 | 265 | 240 | 420 | 385 | 340 | – | – | – | 185 | 155 | 130 | 190 | 170 | 150 |
| 2 | 235 | 210 | 190 | 335 | 295 | 275 | – | – | – | 150 | 120 | 105 | – | – | – | |
| 3 | 195 | 175 | 160 | 280 | 250 | 230 | – | – | – | 120 | 105 | 85 | – | – | – | |
| N | 1 | – | – | – | – | – | – | – | – | – | – | – | – | 2000 | 1200 | 1000 |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | 1365 | 815 | 665 | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | 800 | 500 | 400 | |
| S | 1 | – | – | – | – | – | – | 45 | 40 | 30 | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | 45 | 40 | 30 | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | 55 | 45 | 30 | – | – | – | – | – | – | |
| 4 | – | – | – | – | – | – | 85 | 60 | 40 | – | – | – | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
推荐初始切削速度 [米/分钟]
| Material Group | TN2510 | TN6540 | TN7525 | TN7535 | WK15CM | |||||||||||
| P | 0 | – | – | – | 300 | 235 | 200 | 340 | 260 | 235 | 455 | 395 | 370 | – | – | – |
| 1 | 550 | 485 | 450 | 300 | 235 | 200 | 340 | 260 | 235 | 455 | 395 | 370 | – | – | – | |
| 2 | 340 | 310 | 275 | 210 | 160 | 140 | 260 | 210 | 180 | 280 | 255 | 230 | – | – | – | |
| 3 | 310 | 275 | 255 | 180 | 140 | 115 | 235 | 180 | 155 | 255 | 230 | 205 | – | – | – | |
| 4 | 230 | 215 | 190 | 150 | 110 | 90 | 195 | 140 | 120 | 190 | 175 | 160 | – | – | – | |
| 5 | 275 | 250 | 230 | 200 | 150 | 125 | 260 | 195 | 165 | 260 | 230 | 210 | – | – | – | |
| 6 | 190 | 170 | 145 | 135 | 100 | 85 | 170 | 135 | 110 | 160 | 135 | 110 | – | – | – | |
| M | 1 | 225 | 200 | 175 | 110 | 65 | 50 | 205 | 185 | 155 | 205 | 185 | 155 | – | – | – |
| 2 | 205 | 175 | 160 | 65 | 40 | 35 | 185 | 160 | 140 | 185 | 160 | 140 | – | – | – | |
| 3 | 160 | 145 | 125 | 70 | 40 | 35 | 145 | 130 | 115 | 145 | 130 | 115 | – | – | – | |
| K | 1 | 350 | 300 | 250 | 185 | 170 | 150 | 315 | 235 | 200 | 295 | 265 | 240 | 420 | 385 | 340 |
| 2 | 300 | 250 | 210 | 145 | 130 | 115 | 270 | 200 | 165 | 235 | 210 | 190 | 335 | 295 | 275 | |
| 3 | 250 | 210 | 165 | 130 | 120 | 105 | 200 | 165 | 140 | 195 | 175 | 160 | 280 | 250 | 230 | |
| N | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | 40 | 30 | 25 | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | 20 | 15 | 10 | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | 60 | 35 | 25 | – | – | – | – | – | – | – | – | – | |
| 4 | – | – | – | 50 | 25 | 20 | – | – | – | – | – | – | – | – | – | |
| H | 1 | 115 | 90 | 60 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | 115 | 90 | 60 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | 85 | 65 | 45 | – | – | – | – | – | – | – | – | – | – | – | – | |
.png)
