successfully added to cart
View Cart
S 型夹持装置
S 型夹持装置
S 型夹持装置
S 型夹持装置

STFC 90°

S 型夹持装置

Uses and application

  • Shank: KM4X™Shank: KM4X™
  • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
  • 冷却方式- 贯通式冷却  100 bar (1500 psi)  最大值冷却方式- 贯通式冷却 100 bar (1500 psi) 最大值

Workpiece Materials

P Steel
M Stainless Steel
K Cast Iron
N Non-Ferrous
S High-Temp Alloys
H Hardened Materials
Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (2)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (2)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (2)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (2)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (2)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (2)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (2)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (2)
  • M Stainless Steel (2)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (2)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (2)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (2)
  • K Cast Iron (2)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (2)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (2)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (2)
  • N Non-Ferrous Materials (2)
    • N1
      Wrought Aluminum
      (2)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (2)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (2)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (2)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (2)
    • N6
      Carbon, Graphite Composites, CFRP
      (2)
    • N7
      MMC's
      (2)
  • S High-Temp Alloys (2)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (2)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (2)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (2)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (2)
  • H Hardened Materials (2)
    • H1
      Hardened Materials 44-48 HRC
      (2)
    • H2
      Hardened Materials 48-55 HRC
      (2)
    • H3
      Hardened Materials 56-60 HRC
      (2)
    • H4
      Hardened Materials >60 HRC
      (2)
Applications
Applications
  • TRN Boring TRN Boring (2)
  • Turning Turning (2)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (2)
  • Lightly Interrupted Cut (2)
  • Smooth Cut (2)
  • Varying Depth of Cut (2)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (2)
  • 3.0 (2)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.038 mm (2)
  • 0.1 mm (2)
  • 0.2 mm (2)
  • 0.394 mm (2)
  • 0.397 mm (2)
  • 0.4 mm (2)
  • 0.794 mm (2)
  • 0.8 mm (2)
  • 1.2 mm (2)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.0015 in (2)
  • 0.004 in (2)
  • 0.008 in (2)
  • 0.0155 in (2)
  • 0.0156 in (2)
  • 0.0158 in (2)
  • 0.0312 in (2)
  • 0.0313 in (2)
  • 0.0469 in (2)
Corner Radius Min to Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • HT2 (2)
  • HTX (2)
  • K10M (2)
  • K10P (2)
  • K10U (2)
  • K15U (2)
  • K20K (2)
  • K313 (2)
  • K68 (2)
  • KB1625 (2)
  • KB5610 (2)
  • KB5625 (2)
  • KB9610 (2)
  • KC5010 (2)
  • KC5025 (2)
  • KC5410 (2)
  • KC720 (2)
  • KC730 (2)
  • KC732 (2)
  • KC8050 (2)
  • KC810 (2)
  • KC850 (2)
  • KC9025 (2)
  • KC910 (2)
  • KC9105 (2)
  • KC9110 (2)
  • KC9120 (2)
  • KC9125 (2)
  • KC9225 (2)
  • KC9240 (2)
  • KC9240NEW (2)
  • KC9315 (2)
  • KC9320 (2)
  • KC9325 (2)
  • KC935 (2)
  • KC950 (2)
  • KC990 (2)
  • KCD25 (2)
  • KCK05 (2)
  • KCK05B (2)
  • KCK15 (2)
  • KCK15B (2)
  • KCK20 (2)
  • KCK20B (2)
  • KCM15 (2)
  • KCM25 (2)
  • KCM25B (2)
  • KCM35 (2)
  • KCM35B (2)
  • KCP05 (2)
  • KCP10 (2)
  • KCP10B (2)
  • KCP25 (2)
  • KCP25B (2)
  • KCP30 (2)
  • KCS10 (2)
  • KCS10B (2)
  • KCU10 (2)
  • KCU25 (2)
  • KD1400 (2)
  • KD1425 (2)
  • KT315 (2)
  • KT325 (2)
  • KTP10 (2)
  • KU10T (2)
  • KU30T (2)
  • PB100 (2)
  • PB170 (2)
  • PB250 (2)
  • THM (2)
  • TN10P (2)
  • TN10U (2)
  • TN15M (2)
  • TN15U (2)
  • TN20K (2)
  • TN20P (2)
  • TN30M (2)
  • TN5015 (2)
  • TN5020 (2)
  • TN5105 (2)
  • TN5120 (2)
  • TN6010 (2)
  • TN6025 (2)
  • TN7005 (2)
  • TN7010 (2)
  • TN7015 (2)
  • TN7025 (2)
  • TN7035 (2)
  • TN7105 (2)
  • TN7110 (2)
  • TN7115 (2)
  • TN7125 (2)
  • TN7135 (2)
  • TN8025 (2)
  • TTM09 (2)
  • TTR (2)
  • WBH20P (2)
  • WBH25U (2)
  • WBK45U (2)
  • WDN25U (2)
  • WK05CT (2)
  • WK15CT (2)
  • WK20CT (2)
  • WM15CT (2)
  • WM25CT (2)
  • WP15CT (2)
  • WP25CT (2)
  • WS10PT (2)
  • WS25PT (2)
  • WU05PT (2)
  • WU10HT (2)
  • WU10PT (2)
  • WU25PT (2)
insertGeometry
Cutting Tool Material
Cutting Tool Material
  • B H (2)
  • B L (2)
  • D P (2)
  • H T (2)
  • H W (2)
other
Cutting Condition Material
Cutting Condition Material
  • H-All (2)
  • K-All (2)
  • M-All (2)
  • N-All (2)
  • P-All (2)
  • S-All (2)
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying 1- 2 of 2 results
Select Columns
Select Filters
Metric
Inch
Show
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
5552405 KM4X63STFCL16 KM4X63STFCL16 70.0000 2.756 43.0000 1.693 86.0000 3.386 TC..16T308/TC..3252 1.43 3.15
    List price:
    $389.71 /each.
    Your price::
    Qty
    5552407 KM4X63STFCR16 KM4X63STFCR16 70.0000 2.756 43.0000 1.693 86.0000 3.386 TC..16T308/TC..3252 1.43 3.15
      List price:
      $389.71 /each.
      Your price::
      Qty
      List price:
      Discount: %
      Your price::
      Replacement This item is not available
      Replacement Product This item may be available through a distributor
      Qty

      Sold in pkg. of

      product-image
      Please adjust the following properties from

      ISO Catalog

      ANSI Catalog

      to find similar products.
      You are about to create a duplicate . Do you want to proceed?
      You are about to delete Do you want to proceed?
      What would you like to rename your to?
      Please enter a valid name
      Please enter a name for the duplicate
      Please enter a valid name
      You are about to add to your My Solutions page. Do you want to proceed?
      Please enter a valid name
      Send a copy of

      Please enter a valid Email
      Please enter a valid name

      We have found the following CAD Drawings

      Select the files you are looking for and download them all at once

      You should be logged to see your dashboard information
      The product/s () you were trying to add to the cart is/are not available, please contact customer service.
      item(s) successfully added to the cart
      View Cart