Product Suggestions

Product Family suggestions

successfully added to cart
View Cart

Notifications

Mark all as read
Mobile Menu
Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
工件材料
工件材料
  • P 钢 (13)
    • P0
      低碳钢，长切屑 C < .25%；<125 HB；<530 N/mm^2 UTS
      (13)
    • P1
      低碳钢、短切屑 C < .25%；<125 HB；<530 N/mm^2 UTS
      (13)
    • P2
      中碳钢和高碳钢 C < .25%；<220 HB；<25 HRC；>530 N/mm^2 UTS
      (13)
    • P3
      合金钢和工具钢 C > .25%；<330 HB；<35 HRC；600-850 N/mm^2 UTS
      (13)
    • P4
      合金钢和工具钢 C > .25%；350-420 HB；35-43 HRC；850-1400 N/mm^2 UTS
      (13)
    • P5
      铁素体、马氏体和 PH 不锈钢 <330 HB；<35 HRC；600-900 N/mm^2 UTS
      (13)
    • P6
      高强度铁素体、马氏体和 PH 不锈钢 350-450 HB；35-43 HRC；900-2400 N/mm^2 UTS
      (13)
  • M 不锈钢 (13)
    • M1
      奥氏体不锈钢 130-200 HB；<600 N/mm^2 UTS
      (13)
    • M2
      高强度奥氏体不锈钢和铸造不锈钢 150-230 HB；<25 HRC; >600 N/mm^2 UTS
      (13)
    • M3
      双相不锈钢 135-275 HB；<30 HRC; 500-1200 N/mm^2 UTS
      (13)
  • K 铸铁 (13)
    • K1
      灰口铸铁 120-290 HB；<32 HRC; 125-500 N/mm^2 UTS
      (13)
    • K2
      中低强度 CGI 和球墨铸铁 130-260 HB；<28 HRC; <600 N/mm^2 UTS
      (13)
    • K3
      高强度球墨铸铁和奥氏体球墨铸铁 180-350 HB；<43 HRC; >600 N/mm^2 UTS
      (13)
  • N 非铁金属材料 (13)
    • N1
      铝型材
      (13)
    • N2
      低硅铝合金和镁合金 硅 < 12.2%
      (13)
    • N3
      高硅铝合金 硅 > 12.2%
      (11)
    • N4
      可机加工转位范围为 70 到 100 的铜基、黄铜基、锌基
      (13)
    • N5
      尼龙、塑料、橡胶、酚醛塑料、树脂、玻璃纤维
      (13)
    • N6
      碳、石墨复合材料、CFRP
      (13)
    • N7
      MMC
      (9)
  • S 高温合金 (13)
    • S1
      铁基耐热合金 160-260 HB；25-48 HRC；500-1200 N/mm^2 UTS
      (13)
    • S2
      钴基耐热合金 250-450 HB；25-48 HRC；1000-1450 N/mm^2 UTS
      (13)
    • S3
      镍基耐热合金 160-450 HB；<48 HRC; 600-1700 N/mm^2 UTS
      (13)
    • S4
      钛和钛合金 300-400 HB；33-43 HRC；900-1600 N/mm^2 UTS
      (13)
  • H 淬火材料 (9)
    • H1
      淬火材料 44-48 HRC
      (9)
    • H2
      淬火材料 48-55 HRC
      (7)
    • H3
      淬火材料 56-60 HRC
      (7)
    • H4
      淬火材料 >60 HRC
      (7)
应用
应用
  • Chamfer Turning Chamfer Turning (5)
  • Cut-Off Cut-Off (5)
  • Deep Grooving Deep Grooving (5)
  • Face Grooving Face Grooving (5)
  • Facing Facing (5)
  • Grooving Grooving (13)
  • ID Grooving ID Grooving (8)
  • ID Thread Turning ID Thread Turning (8)
  • Multiple Direction Cutting Multiple Direction Cutting (5)
  • OD Thread Turning OD Thread Turning (13)
  • Plunge Turning Plunge Turning (5)
  • Profiling Profiling (5)
  • TRN Boring TRN Boring (8)
  • Threading Threading (13)
  • Turning Turning (5)
螺纹类型
螺纹类型
  • 60 (7)
  • ACME (9)
  • API (7)
  • API RD (5)
  • BSW (3)
  • BUTTRESS (7)
  • M (3)
  • NPT (3)
  • STUB ACME (3)
  • UN (7)
  • UNJ (3)
切削条件
切削条件
  • Heavily Interrupted Cut (13)
  • Lightly Interrupted Cut (13)
  • Smooth Cut (13)
  • Varying Depth of Cut (13)
连接类型
连接类型
  • KM (5)
每个刀片的切削刃
每个刀片的切削刃
  • 1.0 (7)
  • 2.0 (13)
每个刀片的切削刃 Min to 每个刀片的切削刃 Max
内部冷却液性能
内部冷却液性能
cornerConfiguration
刀尖半径
刀尖半径
  • 0.002 in (3)
  • 0.003 in (7)
  • 0.004 in (3)
  • 0.005 in (3)
  • 0.006 in (7)
  • 0.007 in (7)
  • 0.008 in (7)
  • 0.01 in (7)
  • 0.011 in (3)
  • 0.012 in (3)
  • 0.014 in (11)
  • 0.016 in (5)
  • 0.017 in (3)
  • 0.019 in (7)
  • 0.02 in (3)
  • 0.023 in (11)
  • 0.031 in (3)
  • 0.033 in (6)
  • 0.035 in (7)
  • 0.039 in (3)
  • 0.047 in (3)
  • 0.049 in (3)
  • 0.06 in (3)
  • 0.062 in (3)
  • 0.063 in (7)
  • 0.069 in (3)
  • 0.078 in (3)
  • 0.079 in (7)
  • 0.089 in (7)
  • 0.095 in (7)
  • 0.098 in (4)
  • 0.125 in (4)
刀尖半径 Min to 刀尖半径 Max
刀尖半径
刀尖半径
  • 0.05 mm (3)
  • 0.076 mm (7)
  • 0.1 mm (3)
  • 0.125 mm (3)
  • 0.151 mm (7)
  • 0.176 mm (7)
  • 0.2 mm (7)
  • 0.225 mm (3)
  • 0.25 mm (7)
  • 0.275 mm (3)
  • 0.301 mm (3)
  • 0.325 mm (11)
  • 0.351 mm (7)
  • 0.4 mm (5)
  • 0.426 mm (3)
  • 0.45 mm (7)
  • 0.476 mm (2)
  • 0.5 mm (3)
  • 0.576 mm (11)
  • 0.775 mm (3)
  • 0.826 mm (6)
  • 0.9 mm (7)
  • 1.0 mm (3)
  • 1.201 mm (3)
  • 1.25 mm (3)
  • 1.5 mm (3)
  • 1.576 mm (3)
  • 1.6 mm (7)
  • 1.75 mm (3)
  • 1.975 mm (3)
  • 2.0 mm (7)
  • 2.25 mm (7)
  • 2.401 mm (7)
  • 2.5 mm (4)
  • 3.176 mm (4)
刀尖半径 Min to 刀尖半径 Max
application
最小切削深度
最小切削深度
最小进给
最小进给
切削刀具材质
切削刀具材质
  • K2885 (3)
  • K313 (7)
  • K420 (13)
  • K4H (3)
  • K68 (13)
  • KB1345 (7)
  • KB1630 (7)
  • KB5625 (3)
  • KBH20 (2)
  • KC250 (3)
  • KC5010 (9)
  • KC5025 (13)
  • KC5410 (7)
  • KC710 (7)
  • KC720 (7)
  • KC722 (7)
  • KC730 (9)
  • KC732 (3)
  • KC810 (13)
  • KC850 (13)
  • KC910 (3)
  • KC9110 (7)
  • KC9120 (3)
  • KC9320 (7)
  • KC935 (7)
  • KC950 (7)
  • KCK20 (7)
  • KCK20B (7)
  • KCP10B (7)
  • KCP25B (7)
  • KCU10 (9)
  • KCU25 (11)
  • KD050 (2)
  • KD081 (3)
  • KD100 (5)
  • KD120 (7)
  • KD1425 (3)
  • KT175 (3)
  • KT315 (7)
  • KU10T (7)
  • KU25T (7)
  • KU30T (7)
  • KY3000 (7)
  • THM (3)
  • TN10P (5)
  • TN6010 (7)
  • TN6025 (11)
  • TN7110 (7)
  • WU10HT (2)
  • WU10PT (4)
  • WU25PT (1)
刀具手式
刀具手式
  • L (2)
  • R (3)
F 尺寸
F 尺寸
  • 53.0 mm (5)
F 尺寸 Min to F 尺寸 Max
F 尺寸
F 尺寸
  • 2.087 in (5)
F 尺寸 Min to F 尺寸 Max
最小轴向凹槽直径
最小轴向凹槽直径
  • 0.0 mm (5)
  • 41.301 mm (1)
  • 47.6 mm (1)
  • 57.2 mm (2)
  • 88.9 mm (1)
  • 106.0 mm (8)
  • 139.701 mm (1)
  • 174.601 mm (1)
  • 209.601 mm (2)
  • 222.3 mm (2)
  • 333.0 mm (2)
最小轴向凹槽直径 Min to 最小轴向凹槽直径 Max
最小轴向凹槽直径
最小轴向凹槽直径
  • 0.0 in (5)
  • 1.627 in (1)
  • 1.874 in (1)
  • 2.253 in (2)
  • 3.5 in (1)
  • 4.173 in (8)
  • 5.5 in (1)
  • 6.875 in (1)
  • 8.252 in (2)
  • 8.752 in (2)
  • 13.11 in (2)
最小轴向凹槽直径 Min to 最小轴向凹槽直径 Max
最大轴向凹槽直径
最大轴向凹槽直径
  • 393.661 in (12)
最大轴向凹槽直径 Min to 最大轴向凹槽直径 Max
最大轴向凹槽直径
最大轴向凹槽直径
  • 9999.0 mm (12)
最大轴向凹槽直径 Min to 最大轴向凹槽直径 Max
切削方向
切削方向
  • E (5)
前角样式
前角样式
  • NEUTRAL (ZERO) (5)
最大镗孔深度
最大镗孔深度
  • 2.757 in (8)
最大镗孔深度 Min to 最大镗孔深度 Max
最大镗孔深度
最大镗孔深度
  • 70.0 mm (8)
最大镗孔深度 Min to 最大镗孔深度 Max
frontEnd
切削宽度
切削宽度
  • 0.039 in (3)
  • 0.047 in (3)
  • 0.06 in (3)
  • 0.062 in (3)
  • 0.069 in (3)
  • 0.073 in (3)
  • 0.078 in (3)
  • 0.079 in (3)
  • 0.088 in (3)
  • 0.089 in (3)
  • 0.095 in (3)
  • 0.097 in (3)
  • 0.098 in (3)
  • 0.105 in (3)
  • 0.108 in (3)
  • 0.11 in (3)
  • 0.119 in (7)
  • 0.122 in (3)
  • 0.125 in (7)
  • 0.126 in (7)
  • 0.128 in (3)
  • 0.131 in (2)
  • 0.138 in (7)
  • 0.143 in (3)
  • 0.156 in (3)
  • 0.157 in (7)
  • 0.167 in (7)
  • 0.169 in (3)
  • 0.177 in (7)
  • 0.178 in (3)
  • 0.181 in (2)
  • 0.185 in (5)
  • 0.188 in (7)
  • 0.189 in (7)
  • 0.192 in (2)
  • 0.193 in (2)
  • 0.195 in (3)
  • 0.197 in (8)
  • 0.202 in (4)
  • 0.213 in (4)
  • 0.217 in (4)
  • 0.218 in (2)
  • 0.219 in (4)
  • 0.237 in (8)
  • 0.25 in (10)
  • 0.255 in (4)
  • 0.276 in (4)
  • 0.281 in (6)
  • 0.312 in (6)
  • 0.315 in (2)
  • 0.345 in (4)
  • 0.354 in (4)
  • 0.375 in (6)
  • 0.38 in (4)
  • 0.383 in (2)
切削宽度 Min to 切削宽度 Max
切削宽度
切削宽度
  • 1.0 mm (3)
  • 1.201 mm (3)
  • 1.5 mm (3)
  • 1.576 mm (3)
  • 1.75 mm (3)
  • 1.826 mm (3)
  • 1.975 mm (3)
  • 2.0 mm (3)
  • 2.2 mm (3)
  • 2.225 mm (3)
  • 2.25 mm (3)
  • 2.401 mm (3)
  • 2.475 mm (3)
  • 2.5 mm (3)
  • 2.676 mm (3)
  • 2.75 mm (3)
  • 2.801 mm (3)
  • 3.0 mm (7)
  • 3.1 mm (3)
  • 3.176 mm (7)
  • 3.2 mm (7)
  • 3.25 mm (3)
  • 3.325 mm (2)
  • 3.5 mm (7)
  • 3.6 mm (3)
  • 3.95 mm (3)
  • 3.975 mm (2)
  • 4.0 mm (7)
  • 4.25 mm (7)
  • 4.3 mm (3)
  • 4.5 mm (7)
  • 4.525 mm (3)
  • 4.601 mm (2)
  • 4.7 mm (5)
  • 4.775 mm (7)
  • 4.801 mm (7)
  • 4.875 mm (2)
  • 4.9 mm (2)
  • 4.95 mm (3)
  • 5.0 mm (8)
  • 5.125 mm (4)
  • 5.4 mm (4)
  • 5.5 mm (4)
  • 5.525 mm (2)
  • 5.575 mm (4)
  • 6.0 mm (8)
  • 6.351 mm (10)
  • 6.476 mm (4)
  • 7.0 mm (4)
  • 7.125 mm (6)
  • 7.926 mm (6)
  • 8.0 mm (2)
  • 8.75 mm (4)
  • 9.0 mm (4)
  • 9.525 mm (6)
  • 9.65 mm (4)
  • 9.726 mm (2)
切削宽度 Min to 切削宽度 Max
刀片尺寸
刀片尺寸
  • 3 (3)
  • 4 (4)
  • 5 (4)
  • 6 (2)
最大切削深度
最大切削深度
  • 0.21 in (2)
  • 0.294 in (2)
  • 0.299 in (2)
  • 0.416 in (2)
最大切削深度 Min to 最大切削深度 Max
最大切削深度
最大切削深度
  • 5.325 mm (2)
  • 7.476 mm (2)
  • 7.601 mm (2)
  • 10.55 mm (2)
最大切削深度 Min to 最大切削深度 Max
insertGeometry
切削刀具材料
切削刀具材料
  • B H (7)
  • B L (3)
  • C N (7)
  • D P (5)
  • H T (7)
  • H W (13)
backEnd
连接类型
连接类型
  • TAPER SHANK (5)
系统规格
系统规格
  • KM80TS (5)
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

NS 93° NS 93°

Top Notch™ Threading and Grooving • KM40TS™ Cutting Units
(5 Products)
  • 刀柄 — KM－TS ISO 26622刀柄 — KM－TS ISO 26622
  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Coolant — Through Coolant 100 bar (1500 psi) MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
  • 冷却方式－ 贯通式冷却 100 bar (1500 psi) 最大值冷却方式－ 贯通式冷却 100 bar (1500 psi) 最大值
View Products
SAP 材料编号 ISO 目录编号 ANSI 目录编号 [L1] 刀具长度 [L1] 刀具长度 [F] F 尺寸 [F] F 尺寸 Gage 刀片 重量（千克） 重量（磅）
3668865 KM80TSNSL4 KM80TSNSL4 70.0000 2.755 53.0000 2.086 NG4L 1.97 4.35
    This item is no longer available
    Please contact customer service for assistance
    Your price::
    3668867 KM80TSNSL5 KM80TSNSL5 80.0000 3.149 53.0000 2.086 NG5L 2.27 5.01
      This item is no longer available
      Please contact customer service for assistance
      Your price::
      3668864 KM80TSNSR3 KM80TSNSR3 70.0000 2.755 53.0000 2.086 NG3R 1.96 4.32
        List price:
        $645.93 /each
        Your price::
        3668866 KM80TSNSR4 KM80TSNSR4 70.0000 2.755 53.0000 2.086 NG4R 1.94 4.28
          This item is no longer available
          Please contact customer service for assistance
          Your price::
          3668868 KM80TSNSR5 KM80TSNSR5 80.0000 3.149 53.0000 2.086 NG5R 2.25 4.95
            This item is no longer available
            Please contact customer service for assistance
            Your price::
            List price:
            Discount: %
            Your price::
            Replacement This item is no longer available
            Replacement Product Please contact customer service for assistance

            ORIGINAL PRODUCT

            NE 93° NE 93°

            Top Notch™ Threading and Grooving • KM40TS™ Cutting Units
            (8 Products)
            • 刀柄 — KM－TS ISO 26622刀柄 — KM－TS ISO 26622
            • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
            • Coolant — Through Coolant 100 bar (1500 psi) MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
            • 冷却方式－ 贯通式冷却 100 bar (1500 psi) 最大值冷却方式－ 贯通式冷却 100 bar (1500 psi) 最大值
            View Products
            SAP 材料编号 ISO 目录编号 ANSI 目录编号 [L1] 刀具长度 [L1] 刀具长度 [F] F 尺寸 [F] F 尺寸 [DM] 最小镗孔直径 [DM] 最小镗孔直径 Gage 刀片 重量（千克） 重量（磅）
            3665053 KM80TSNEL3 KM80TSNEL3 70.0000 2.756 53.0000 2.087 106.0000 4.173 NG3R 2.14 4.72
              List price:
              $645.93 /each
              Your price::
              3665055 KM80TSNEL4 KM80TSNEL4 70.0000 2.756 53.0000 2.087 106.0000 4.173 NG4R 2.18 4.81
                List price:
                $645.93 /each
                Your price::
                3665057 KM80TSNEL5 KM80TSNEL5 70.0000 2.756 53.0000 2.087 106.0000 4.173 NG5R 2.28 5.02
                  List price:
                  $645.93 /each
                  Your price::
                  3665054 KM80TSNER3 KM80TSNER3 70.0000 2.756 53.0000 2.087 106.0000 4.173 NG3L 2.14 4.72
                    List price:
                    $645.93 /each
                    Your price::
                    3665056 KM80TSNER4 KM80TSNER4 70.0000 2.756 53.0000 2.087 106.0000 4.173 NG4L 2.18 4.81
                      List price:
                      $645.93 /each
                      Your price::
                      3665058 KM80TSNER5 KM80TSNER5 70.0000 2.756 53.0000 2.087 106.0000 4.173 NG5L 2.28 5.02
                        List price:
                        $645.93 /each
                        Your price::
                        List price:
                        Discount: %
                        Your price::
                        Replacement This item is no longer available
                        Replacement Product Please contact customer service for assistance
                        product-image
                        Please adjust the following properties from

                        ISO Catalog

                        ANSI Catalog

                        to find similar products.
                        You are about to create a duplicate . Do you want to proceed?
                        You are about to delete Do you want to proceed?
                        What would you like to rename your to?
                        Please enter a valid name
                        Please enter a name for the duplicate
                        Please enter a valid name
                        You are about to add to your My Solutions page. Do you want to proceed?
                        Please enter a valid name
                        Send a copy of

                        Please enter a valid Email
                        Please enter a valid name

                        The following CAD files are available

                        Please select a file to download

                        Can’t find the file type you’re looking for?
                        Request Drawings »

                        You should be logged to see your dashboard information
                        Session expired due to inactivity, please login again
                        The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                        item(s) successfully added to the cart
                        View Cart
                        DOWNLOAD TYPE:



                        . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

                        SAP Material Number ISO Catalog Grade    
                        Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

                        You are about to leave the Solution building process.

                        Are you sure you want to leave?