欢迎
请确认您的首选项
更新首选项

Product Suggestions

Product Family suggestions

WIDIA 随时为您服务

有关于产品的问题吗?

查看按专业领域划分的全球服务专业人员的完整列表

快速订购
Item(s) successfully added to cart
查看购物车
回到解决方案

编辑解决方案

添加解决方案

解决方案名称: {{SolutionName}}

D-夹持

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
工件材料
工件材料
  • P 钢 (6)
    • P0
      低碳钢，长切屑 C < .25%；<125 HB；<530 N/mm^2 UTS
      (6)
    • P1
      低碳钢、短切屑 C < .25%；<125 HB；<530 N/mm^2 UTS
      (6)
    • P2
      中碳钢和高碳钢 C < .25%；<220 HB；<25 HRC；>530 N/mm^2 UTS
      (6)
    • P3
      合金钢和工具钢 C > .25%；<330 HB；<35 HRC；600-850 N/mm^2 UTS
      (6)
    • P4
      合金钢和工具钢 C > .25%；350-420 HB；35-43 HRC；850-1400 N/mm^2 UTS
      (6)
    • P5
      铁素体、马氏体和 PH 不锈钢 <330 HB；<35 HRC；600-900 N/mm^2 UTS
      (6)
    • P6
      高强度铁素体、马氏体和 PH 不锈钢 350-450 HB；35-43 HRC；900-2400 N/mm^2 UTS
      (6)
  • M 不锈钢 (6)
    • M1
      奥氏体不锈钢 130-200 HB；<600 N/mm^2 UTS
      (6)
    • M2
      高强度奥氏体不锈钢和铸造不锈钢 150-230 HB；<25 HRC; >600 N/mm^2 UTS
      (6)
    • M3
      双相不锈钢 135-275 HB；<30 HRC; 500-1200 N/mm^2 UTS
      (6)
  • K 铸铁 (6)
    • K1
      灰口铸铁 120-290 HB；<32 HRC; 125-500 N/mm^2 UTS
      (6)
    • K2
      中低强度 CGI 和球墨铸铁 130-260 HB；<28 HRC; <600 N/mm^2 UTS
      (6)
    • K3
      高强度球墨铸铁和奥氏体球墨铸铁 180-350 HB；<43 HRC; >600 N/mm^2 UTS
      (6)
  • N 非铁金属材料 (6)
    • N1
      铝型材
      (6)
    • N2
      低硅铝合金和镁合金 硅 < 12.2%
      (6)
    • N3
      高硅铝合金 硅 > 12.2%
      (3)
    • N4
      可机加工转位范围为 70 到 100 的铜基、黄铜基、锌基
      (6)
    • N5
      尼龙、塑料、橡胶、酚醛塑料、树脂、玻璃纤维
      (6)
    • N6
      碳、石墨复合材料、CFRP
      (6)
    • N7
      MMC
      (6)
  • S 高温合金 (6)
    • S1
      铁基耐热合金 160-260 HB；25-48 HRC；500-1200 N/mm^2 UTS
      (6)
    • S2
      钴基耐热合金 250-450 HB；25-48 HRC；1000-1450 N/mm^2 UTS
      (6)
    • S3
      镍基耐热合金 160-450 HB；<48 HRC; 600-1700 N/mm^2 UTS
      (6)
    • S4
      钛和钛合金 300-400 HB；33-43 HRC；900-1600 N/mm^2 UTS
      (6)
  • H 淬火材料 (6)
    • H1
      淬火材料 44-48 HRC
      (6)
    • H2
      淬火材料 48-55 HRC
      (6)
    • H3
      淬火材料 56-60 HRC
      (6)
    • H4
      淬火材料 >60 HRC
      (6)
应用
应用
  • Facing Facing (6)
  • ID Facing ID Facing (6)
  • Multiple Direction Cutting Multiple Direction Cutting (6)
  • TRN Boring TRN Boring (6)
  • Turning Turning (4)
切削条件
切削条件
  • Heavily Interrupted Cut (6)
  • Interrupted (6)
  • Lightly Interrupted Cut (6)
  • Smooth Cut (6)
  • Varying Depth of Cut (6)
刀具切削刃角度
刀具切削刃角度
  • 93.0 (2)
  • 95.0 (4)
刀具切削刃角度 Min to 刀具切削刃角度 Max
每个刀片的切削刃
每个刀片的切削刃
  • 1.0 (4)
  • 2.0 (6)
  • 4.0 (6)
  • 8.0 (4)
每个刀片的切削刃 Min to 每个刀片的切削刃 Max
cornerConfiguration
刀尖半径
刀尖半径
  • 0.004 in (4)
  • 0.008 in (3)
  • 0.014 in (1)
  • 0.016 in (6)
  • 0.031 in (6)
  • 0.047 in (6)
  • 0.062 in (2)
  • 0.063 in (6)
  • 0.094 in (3)
  • 0.095 in (2)
  • 0.126 in (2)
刀尖半径 Min to 刀尖半径 Max
刀尖半径
刀尖半径
  • 0.1 mm (4)
  • 0.2 mm (3)
  • 0.351 mm (1)
  • 0.4 mm (6)
  • 0.8 mm (6)
  • 1.201 mm (6)
  • 1.576 mm (2)
  • 1.6 mm (6)
  • 2.375 mm (3)
  • 2.401 mm (2)
  • 3.2 mm (2)
刀尖半径 Min to 刀尖半径 Max
application
最小切削深度
最小切削深度
最小进给
最小进给
切削刀具材质
切削刀具材质
  • 13E (6)
  • 241 (2)
  • CL4 (3)
  • CM2 (6)
  • CM3 (3)
  • CM4 (4)
  • CPX (6)
  • CW2 (3)
  • CW2015 (6)
  • CW5025 (6)
  • GX (2)
  • HK1500 (3)
  • HT2 (3)
  • HTX (2)
  • K060 (3)
  • K090 (6)
  • K1 (2)
  • K10M (6)
  • K10P (6)
  • K10U (4)
  • K15U (4)
  • K20K (6)
  • K21 (2)
  • K25M (6)
  • K25P (4)
  • K313 (6)
  • K35P (4)
  • K420 (5)
  • K45 (3)
  • K68 (6)
  • KB1340 (2)
  • KB1345 (3)
  • KB1610 (3)
  • KB1625 (3)
  • KB1630 (3)
  • KB5610 (3)
  • KB5625 (3)
  • KB5630 (3)
  • KB9610 (4)
  • KB9640 (2)
  • KBH10 (4)
  • KBH10B (4)
  • KBH20 (4)
  • KBH20B (4)
  • KBK35 (2)
  • KC210 (4)
  • KC250 (5)
  • KC5010 (6)
  • KC5025 (6)
  • KC5410 (6)
  • KC5510 (6)
  • KC5525 (4)
  • KC710 (2)
  • KC720 (5)
  • KC722 (2)
  • KC730 (5)
  • KC7310 (6)
  • KC732 (5)
  • KC8050 (6)
  • KC810 (6)
  • KC850 (6)
  • KC9010 (6)
  • KC9025 (6)
  • KC910 (6)
  • KC9105 (6)
  • KC9110 (6)
  • KC9120 (6)
  • KC9125 (6)
  • KC9140 (6)
  • KC9145 (6)
  • KC9210 (1)
  • KC9215 (6)
  • KC9225 (6)
  • KC9240 (6)
  • KC9240NEW (6)
  • KC9245 (6)
  • KC9315 (6)
  • KC9320 (6)
  • KC9325 (6)
  • KC935 (6)
  • KC950 (6)
  • KC990 (6)
  • KCD25 (1)
  • KCK05 (6)
  • KCK05B (6)
  • KCK15 (6)
  • KCK15B (6)
  • KCK20 (6)
  • KCK20B (6)
  • KCM15 (6)
  • KCM15B (6)
  • KCM25 (6)
  • KCM25B (6)
  • KCM35 (6)
  • KCM35B (5)
  • KCP05 (6)
  • KCP05B (4)
  • KCP10 (6)
  • KCP10B (6)
  • KCP25 (6)
  • KCP25B (6)
  • KCP25C (6)
  • KCP30 (6)
  • KCP30B (6)
  • KCP40 (6)
  • KCP40B (6)
  • KCPK05 (6)
  • KCS10 (2)
  • KCS10B (6)
  • KCU10 (6)
  • KCU10B (6)
  • KCU25 (6)
  • KD050 (3)
  • KD081 (3)
  • KD100 (3)
  • KD120 (3)
  • KD1400 (3)
  • KD1405 (3)
  • KD1425 (3)
  • KM1 (2)
  • KMF (2)
  • KS15 (2)
  • KT1120 (2)
  • KT125 (4)
  • KT150 (3)
  • KT175 (4)
  • KT315 (4)
  • KT325 (3)
  • KTP10 (1)
  • KU10T (4)
  • KU30T (6)
  • KY1310 (5)
  • KY1320 (6)
  • KY1540 (3)
  • KY1615 (6)
  • KY2000 (5)
  • KY2100 (3)
  • KY3000 (6)
  • KY3400 (5)
  • KY3500 (6)
  • KY4000 (4)
  • KY4300 (5)
  • KY4400 (6)
  • KYHK15B (6)
  • KYK10 (3)
  • KYK25 (5)
  • KYK35 (6)
  • KYS25 (3)
  • KYS30 (3)
  • NL200 (3)
  • NL250 (6)
  • NL300 (5)
  • NL400 (4)
  • NL920 (4)
  • P25 (2)
  • PB100 (2)
  • PB170 (2)
  • PB250 (2)
  • PB300 (2)
  • PS5 (3)
  • SP0819 (5)
  • SP3019 (4)
  • SP4019 (5)
  • THM (2)
  • THM-X (3)
  • THMF-X (2)
  • TN10P (6)
  • TN10U (4)
  • TN15M (6)
  • TN15U (4)
  • TN2000 (3)
  • TN20K (6)
  • TN20P (6)
  • TN30M (6)
  • TN30P (6)
  • TN4000 (3)
  • TN5015 (6)
  • TN5020 (5)
  • TN5105 (4)
  • TN5120 (6)
  • TN6010 (4)
  • TN6025 (3)
  • TN7005 (4)
  • TN7010 (6)
  • TN7015 (6)
  • TN7025 (6)
  • TN7035 (5)
  • TN7105 (3)
  • TN7110 (6)
  • TN7115 (6)
  • TN7125 (5)
  • TN7135 (5)
  • TN8025 (6)
  • TTI15 (3)
  • TTR (2)
  • TTS (3)
  • TTX (3)
  • WBH10C (4)
  • WBH10P (3)
  • WBH10U (3)
  • WBH20P (4)
  • WBH25P (3)
  • WBH25U (4)
  • WBH30P (3)
  • WBK40U (2)
  • WBK45U (4)
  • WDN00U (3)
  • WDN25U (3)
  • WK05CT (6)
  • WK15CT (3)
  • WK20CT (6)
  • WM15CT (6)
  • WM25CT (6)
  • WM35CT (6)
  • WP05CT (2)
  • WP15CT (6)
  • WP25CT (6)
  • WP35CT (6)
  • WS10PT (6)
  • WS25PT (6)
  • WU10HT (6)
  • WU10PT (3)
  • WU25PT (3)
  • X00511 (2)
  • X00580 (2)
  • X00581 (2)
  • X00582 (2)
  • X00583 (2)
  • X00584 (2)
  • X00585 (2)
  • X00586 (2)
  • X00591 (2)
  • X00592 (2)
  • X00593 (2)
  • X00594 (2)
  • X00596 (2)
  • X00597 (2)
  • X00599 (2)
刀具手式
刀具手式
  • L (3)
  • R (3)
修光刃刀片
修光刃刀片
  • N (6)
  • Y (4)
F 尺寸
F 尺寸
  • 17.0 mm (2)
  • 27.0 mm (4)
F 尺寸 Min to F 尺寸 Max
F 尺寸
F 尺寸
  • 0.669 in (2)
  • 1.063 in (4)
F 尺寸 Min to F 尺寸 Max
最小轴向凹槽直径
最小轴向凹槽直径
  • 32.0 mm (2)
  • 50.0 mm (4)
最小轴向凹槽直径 Min to 最小轴向凹槽直径 Max
最小轴向凹槽直径
最小轴向凹槽直径
  • 1.26 in (2)
  • 1.969 in (4)
最小轴向凹槽直径 Min to 最小轴向凹槽直径 Max
切削方向
切削方向
  • B (4)
  • E (2)
最大镗孔深度
最大镗孔深度
  • 2.835 in (2)
  • 4.488 in (4)
最大镗孔深度 Min to 最大镗孔深度 Max
最大镗孔深度
最大镗孔深度
  • 72.0 mm (2)
  • 114.0 mm (4)
最大镗孔深度 Min to 最大镗孔深度 Max
frontEnd
刀片形状
刀片形状
  • C-DIAMOND/RHOMBIC 80 (4)
  • D-DIAMOND/RHOMBIC 55 (2)
insertGeometry
切削刀具材料
切削刀具材料
  • B H (4)
  • B L (4)
  • C A (6)
  • C N (6)
  • D P (4)
  • H T (4)
  • H W (6)
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

DCLN 95° DCLN 95°

内孔切削单元 • D 型夹持
(4 Products)
  • Shank - PSCShank - PSC
  • 制造商规格： ISO 26623制造商规格： ISO 26623
  • Coolant: Through Coolant 80 bar MaximumCoolant: Through Coolant 80 bar Maximum
  • Coolant: Through Coolant 1200 psi MaximumCoolant: Through Coolant 1200 psi Maximum
View Products
SAP 材料编号 ISO 目录编号 ANSI 目录编号 [D2] 工件侧钻体直径 1 [D2] 工件侧钻体直径 1 [L1] 刀具长度 [L1] 刀具长度 [L4] 最大镗削深度 [L4] 最大镗削深度 [F] F 尺寸 [F] F 尺寸 [DM] 最小镗孔直径 [DM] 最小镗孔直径 Gage 刀片 重量（千克）
6339684 PSC63S25HDCLNL12 PSC63S25HDCLNL12 25.0000 .9843 100.0000 3.937 72.0000 2.834 17.0000 .6693 32.0000 1.259 CN..120408/CN..432 1.29
    List price:
    $580.74 /each
    Your price::
    6339689 PSC63S25HDCLNR12 PSC63S25HDCLNR12 25.0000 .9843 100.0000 3.937 72.0000 2.834 17.0000 .6693 32.0000 1.259 CN..120408/CN..432 1.29
      List price:
      $580.74 /each
      Your price::
      6339685 PSC63S40LDCLNL16 PSC63S40LDCLNL16 40.0000 1.574 140.0000 5.511 114.0000 4.488 27.0000 1.063 50.0000 1.968 CN..160612/CN..543 2.07
        List price:
        $580.74 /each
        Your price::
        6339690 PSC63S40LDCLNR16 PSC63S40LDCLNR16 40.0000 1.574 140.0000 5.511 114.0000 4.488 27.0000 1.063 50.0000 1.968 CN..160612/CN..543 2.07
          List price:
          $580.74 /each
          Your price::
          List price:
          Discount: %
          Your price::
          Replacement This item is no longer available
          Replacement Product Please contact customer service for assistance

          ORIGINAL PRODUCT

          DDUN 93° DDUN 93°

          切削装置 • D 型夹持装置
          (2 Products)
          • Shank - PSCShank - PSC
          • 制造商规格： ISO 26623制造商规格： ISO 26623
          • Coolant: Through Coolant 80 bar MaximumCoolant: Through Coolant 80 bar Maximum
          • Coolant: Through Coolant 1200 psi MaximumCoolant: Through Coolant 1200 psi Maximum
          View Products
          SAP 材料编号 ISO 目录编号 ANSI 目录编号 [D2] 工件侧钻体直径 1 [D2] 工件侧钻体直径 1 [L1] 刀具长度 [L1] 刀具长度 [L4] 最大镗削深度 [L4] 最大镗削深度 [F] F 尺寸 [F] F 尺寸 [DM] 最小镗孔直径 [DM] 最小镗孔直径 Gage 刀片 重量（千克）
          6341449 PSC63S40LDDUNL1506 PSC63S40LDDUNL1506 40.0000 1.574 140.0000 5.511 114.0000 4.488 27.0000 1.063 50.0000 1.968 DN..150608/DN..442 1.70
            List price:
            $580.74 /each
            Your price::
            6341450 PSC63S40LDDUNR1506 PSC63S40LDDUNR1506 40.0000 1.574 140.0000 5.511 114.0000 4.488 27.0000 1.063 50.0000 1.968 DN..150608/DN..442 1.70
              List price:
              $580.74 /each
              Your price::
              List price:
              Discount: %
              Your price::
              Replacement This item is no longer available
              Replacement Product Please contact customer service for assistance
              product-image
              Please adjust the following properties from

              ISO Catalog

              ANSI Catalog

              to find similar products.

              The following CAD files are available

              Please select a file to download

              Can’t find the file type you’re looking for?

              You are about to create a duplicate . Do you want to proceed?
              You are about to delete Do you want to proceed?
              What would you like to rename your to?
              Please enter a valid name
              Please enter a name for the duplicate
              Please enter a valid name
              You are about to add to your My Solutions page. Do you want to proceed?
              Please enter a valid name
              Send a copy of

              Please enter a valid Email
              Please enter a valid name

              The following CAD files are available

              Please select a file to download

              Can’t find the file type you’re looking for?
              Request Drawings »

              You should be logged to see your dashboard information
              Session expired due to inactivity, please login again
              The product/s () you were trying to add to the cart is/are not available, please contact customer service.
              item(s) successfully added to the cart
              View Cart
              DOWNLOAD TYPE:



              . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

              Minimum quantity should be

              SAP Material Number ISO Catalog Grade    
              Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

              You are about to leave the Solution building process.

              Are you sure you want to leave?