HSR • 고속 리머 • 초경

필터 선택
필터
    필터 보기 위치
    Metric
    Inch
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (64)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(64)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(64)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(64)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(64)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(64)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(64)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(64)
    • M Stainless Steel (64)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(64)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(64)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(64)
    • K Cast Iron (64)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(64)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(64)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(64)
    • N Non-Ferrous Materials (42)
      • N1
        Wrought Aluminum (42)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(42)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(42)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (42)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (42)
      • N6
        Carbon, Graphite Composites, CFRP (42)
    • S High-Temp Alloys (64)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(64)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(64)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(42)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(42)
    Applications
    Applications
    • Blind & Cross Hole FinishingBlind & Cross Hole Finishing (18)
    • Blind Hole FinishingBlind Hole Finishing (18)
    • Through & Cross Hole FinishingThrough & Cross Hole Finishing (46)
    • Through Hole FinishingThrough Hole Finishing (46)
    Cutting Diameter
    Cutting Diameter
    • 0.055 in(1)
    • 0.06 in(1)
    • 0.063 in(1)
    • 0.079 in(5)
    • 0.088 in(1)
    • 0.098 in(1)
    • 0.11 in(1)
    • 0.119 in(5)
    • 0.126 in(1)
    • 0.138 in(1)
    • 0.157 in(5)
    • 0.177 in(1)
    • 0.197 in(6)
    • 0.237 in(7)
    • 0.276 in(1)
    • 0.315 in(7)
    • 0.335 in(1)
    • 0.354 in(1)
    • 0.374 in(1)
    • 0.394 in(6)
    • 0.473 in(5)
    • 0.551 in(5)
    Cutting Diameter Min받는 사람Cutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 1.401 mm(1)
    • 1.5 mm(1)
    • 1.6 mm(1)
    • 2.0 mm(5)
    • 2.2 mm(1)
    • 2.5 mm(1)
    • 2.801 mm(1)
    • 3.0 mm(5)
    • 3.2 mm(1)
    • 3.5 mm(1)
    • 4.0 mm(5)
    • 4.5 mm(1)
    • 5.0 mm(6)
    • 6.0 mm(7)
    • 7.0 mm(1)
    • 8.0 mm(7)
    • 8.5 mm(1)
    • 9.0 mm(1)
    • 9.5 mm(1)
    • 10.0 mm(6)
    • 12.0 mm(5)
    • 14.0 mm(5)
    Cutting Diameter Min받는 사람Cutting Diameter Max
    Number of Flutes
    Number of Flutes
    • 3 (3)
    • 4 (27)
    • 6 (34)
    Internal Coolant Capability
    Internal Coolant Capability
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • K10 (20)
    • K10F (22)
    • K10F-DCFD (22)
    Helix Hand
    Helix Hand
    • L (46)
    • N (18)
    Lead in Length
    Lead in Length
    • 0.2 mm(2)
    • 0.301 mm(6)
    • 0.4 mm(8)
    • 0.5 mm(4)
    • 0.601 mm(4)
    • 0.701 mm(7)
    • 0.9 mm(7)
    • 1.1 mm(6)
    Lead in Length Min받는 사람Lead in Length Max
    Lead In Length
    Lead In Length
    • 0.0 in(8)
    • 0.001 in(30)
    • 0.002 in(6)
    Lead In Length Min받는 사람Lead In Length Max
    backEnd
    Back-End Diameter
    Back-End Diameter
    • 1.401 mm(1)
    • 1.5 mm(1)
    • 1.6 mm(1)
    • 2.0 mm(1)
    • 2.2 mm(1)
    • 2.5 mm(1)
    • 2.801 mm(1)
    • 3.0 mm(9)
    • 3.2 mm(1)
    • 3.5 mm(1)
    • 4.0 mm(5)
    • 4.5 mm(1)
    • 5.0 mm(1)
    • 5.601 mm(1)
    • 6.0 mm(11)
    • 7.101 mm(1)
    • 8.0 mm(8)
    • 9.0 mm(2)
    • 10.0 mm(6)
    • 12.0 mm(5)
    • 14.0 mm(5)
    Back-End Diameter Min받는 사람Back-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.055 in(1)
    • 0.06 in(1)
    • 0.063 in(1)
    • 0.079 in(1)
    • 0.088 in(1)
    • 0.098 in(1)
    • 0.11 in(1)
    • 0.119 in(9)
    • 0.126 in(1)
    • 0.138 in(1)
    • 0.157 in(5)
    • 0.177 in(1)
    • 0.197 in(1)
    • 0.221 in(1)
    • 0.237 in(11)
    • 0.28 in(1)
    • 0.315 in(8)
    • 0.354 in(2)
    • 0.394 in(6)
    • 0.473 in(5)
    • 0.551 in(5)
    Back-End Diameter Min받는 사람Back-End Diameter Max
    No filters matching ""
    내 솔루션 페이지에 을(를) 추가하려고 합니다.. 진행하시겠습니까?
    Select the destination where you want to move 받는 사람.
    신제품 Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    ISO 카탈로그 번호

    ANSI 카탈로그 번호

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    대시보드 정보를 보려면 로그인해야 합니다.
    Session expired due to inactivity, please login again
    장바구니에 추가하려는 제품()을 사용할 수 없습니다. 고객 서비스에 문의하십시오.
    항목이 장바구니에 추가되었습니다.

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberISO 카탈로그 번호등급  

    You are about to leave the Solution building process.

    Are you sure you want to leave?