환영합니다
기본 설정을 확인해 주십시오
기본 설정 업데이트

제품 제안

Product Family suggestions

WIDIA 고객 서비스

제품 관련 질문이 있으십니까?

전문 분야별 글로벌 서비스 전문가 전체 목록 보기

빠른 주문
품목 장바구니에 성공적으로 추가되었습니다
장바구니 보기

TopGroove™

필터 선택
Filters
필터
필터 보기 위치
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (462)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (462)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (462)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (462)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (462)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (462)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (462)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (462)
  • M Stainless Steel (474)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (474)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (474)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (474)
  • K Cast Iron (473)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (473)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (473)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (473)
  • N Non-Ferrous Materials (474)
    • N1
      Wrought Aluminum (474)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (474)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (474)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (94)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (474)
    • N6
      Carbon, Graphite Composites, CFRP (474)
    • N7
      MMC's (94)
  • S High-Temp Alloys (474)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (474)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (474)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (474)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (474)
  • H Hardened Materials (35)
    • H1
      Hardened Materials 44-48 HRC (35)
    • H2
      Hardened Materials 48-55 HRC (35)
Select All Star
  • DE (15)
  • IN (3)
  • US (190)
Applications
Applications
  • Boring Boring (3)
  • Face Grooving Face Grooving (425)
  • Grooving Grooving (421)
  • ID Grooving ID Grooving (305)
  • ID Thread Turning ID Thread Turning (44)
  • OD Thread Turning OD Thread Turning (66)
  • Plunge Turning Plunge Turning (264)
  • Profiling Profiling (82)
  • Threading Threading (67)
  • Turning Turning (3)
Type of Thread
Type of Thread
  • 60 (106)
  • ACME (65)
  • API RD (44)
  • BSW (23)
  • BUTTRESS (21)
  • STUB ACME (44)
  • UN (92)
  • UNJ (23)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (449)
  • Lightly Interrupted Cut (449)
  • Smooth Cut (465)
  • Varying Depth of Cut (457)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (110)
Tool Cutting Edge Angle Min 받는 사람 Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Boring Bar Shank (44)
  • Toolholder (47)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (173)
  • 2.0 (402)
Cutting Edges Per Insert Min 받는 사람 Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 2.5 in (1)
  • 3.15 in (1)
  • 3.5 in (1)
  • 3.938 in (1)
  • 4.0 in (2)
  • 4.5 in (9)
  • 4.921 in (8)
  • 5.0 in (9)
  • 5.906 in (18)
  • 6.0 in (21)
  • 6.694 in (2)
  • 7.087 in (2)
  • 7.875 in (4)
  • 8.0 in (3)
  • 9.843 in (2)
  • 10.0 in (5)
  • 11.811 in (3)
  • 12.0 in (6)
  • 13.781 in (1)
  • 14.0 in (7)
  • 16.0 in (4)
Over All Length [L] Min 받는 사람 Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 63.5 mm (1)
  • 80.0 mm (1)
  • 88.9 mm (1)
  • 100.0 mm (1)
  • 101.601 mm (2)
  • 114.301 mm (9)
  • 125.0 mm (8)
  • 127.0 mm (9)
  • 150.0 mm (18)
  • 152.4 mm (21)
  • 170.0 mm (2)
  • 180.0 mm (2)
  • 200.0 mm (4)
  • 203.201 mm (3)
  • 250.0 mm (2)
  • 254.0 mm (5)
  • 300.0 mm (3)
  • 304.8 mm (6)
  • 350.0 mm (1)
  • 355.6 mm (7)
  • 406.401 mm (4)
Over All Length [L] Min 받는 사람 Over All Length [L] Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.003 in (72)
  • 0.004 in (89)
  • 0.006 in (9)
  • 0.007 in (98)
  • 0.008 in (277)
  • 0.01 in (51)
  • 0.012 in (23)
  • 0.014 in (75)
  • 0.017 in (44)
  • 0.02 in (43)
  • 0.023 in (99)
  • 0.03 in (43)
  • 0.031 in (99)
  • 0.039 in (90)
  • 0.047 in (93)
  • 0.049 in (86)
  • 0.06 in (89)
  • 0.062 in (48)
  • 0.063 in (75)
  • 0.069 in (87)
  • 0.078 in (47)
  • 0.079 in (66)
  • 0.089 in (64)
  • 0.095 in (67)
  • 0.098 in (20)
  • 0.125 in (24)
Corner Radius Min 받는 사람 Corner Radius Max
Corner Radius
Corner Radius
  • 0.076 mm (72)
  • 0.1 mm (89)
  • 0.151 mm (9)
  • 0.176 mm (98)
  • 0.2 mm (277)
  • 0.225 mm (23)
  • 0.25 mm (51)
  • 0.301 mm (23)
  • 0.325 mm (75)
  • 0.351 mm (44)
  • 0.426 mm (44)
  • 0.5 mm (43)
  • 0.576 mm (99)
  • 0.75 mm (43)
  • 0.775 mm (99)
  • 1.0 mm (90)
  • 1.201 mm (93)
  • 1.25 mm (86)
  • 1.5 mm (89)
  • 1.576 mm (48)
  • 1.6 mm (75)
  • 1.75 mm (87)
  • 1.975 mm (47)
  • 2.0 mm (66)
  • 2.25 mm (64)
  • 2.401 mm (67)
  • 2.5 mm (20)
  • 3.176 mm (24)
Corner Radius Min 받는 사람 Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (365)
Corner Chamfer Min 받는 사람 Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (365)
Corner Chamfer Min 받는 사람 Corner Chamfer Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • THM (94)
  • TN10P (69)
  • TN6010 (230)
  • TN6025 (336)
  • TN7110 (101)
  • WU10HT (24)
  • WU10PT (35)
  • WU25PT (22)
Hand Of Tool
Hand Of Tool
  • L (34)
  • R (57)
Wiper Insert
Wiper Insert
  • N (474)
F Dimension
F Dimension
  • 6.551 mm (2)
  • 7.0 mm (2)
  • 10.3 mm (1)
  • 11.0 mm (4)
  • 11.101 mm (2)
  • 12.0 mm (1)
  • 12.701 mm (5)
  • 13.0 mm (2)
  • 14.275 mm (3)
  • 15.875 mm (3)
  • 16.0 mm (2)
  • 16.25 mm (2)
  • 17.0 mm (4)
  • 17.475 mm (4)
  • 19.05 mm (1)
  • 19.425 mm (1)
  • 20.0 mm (1)
  • 22.0 mm (2)
  • 22.225 mm (2)
  • 25.0 mm (3)
  • 25.401 mm (8)
  • 27.0 mm (3)
  • 31.75 mm (16)
  • 32.0 mm (7)
  • 32.525 mm (1)
  • 34.926 mm (2)
  • 35.0 mm (1)
  • 38.1 mm (4)
  • 40.0 mm (2)
F Dimension Min 받는 사람 F Dimension Max
F Dimension
F Dimension
  • 0.258 in (2)
  • 0.276 in (2)
  • 0.406 in (1)
  • 0.433 in (4)
  • 0.437 in (2)
  • 0.473 in (1)
  • 0.5 in (5)
  • 0.512 in (2)
  • 0.562 in (3)
  • 0.625 in (3)
  • 0.63 in (2)
  • 0.64 in (2)
  • 0.669 in (4)
  • 0.689 in (4)
  • 0.75 in (1)
  • 0.765 in (1)
  • 0.787 in (1)
  • 0.866 in (2)
  • 0.875 in (2)
  • 0.984 in (3)
  • 1.0 in (8)
  • 1.063 in (3)
  • 1.25 in (16)
  • 1.26 in (7)
  • 1.281 in (1)
  • 1.375 in (2)
  • 1.379 in (1)
  • 1.5 in (4)
  • 1.575 in (2)
F Dimension Min 받는 사람 F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 mm (54)
  • 11.175 mm (2)
  • 11.5 mm (2)
  • 18.5 mm (2)
  • 18.55 mm (2)
  • 20.326 mm (1)
  • 22.0 mm (2)
  • 25.401 mm (2)
  • 26.0 mm (2)
  • 28.576 mm (2)
  • 34.0 mm (4)
  • 34.926 mm (4)
  • 41.301 mm (28)
  • 44.0 mm (2)
  • 44.45 mm (2)
  • 47.6 mm (26)
  • 50.801 mm (2)
  • 54.0 mm (3)
  • 55.875 mm (1)
  • 56.625 mm (3)
  • 57.151 mm (3)
  • 57.2 mm (12)
  • 60.325 mm (2)
  • 63.5 mm (7)
  • 69.851 mm (2)
  • 70.0 mm (1)
  • 76.2 mm (1)
  • 88.9 mm (139)
  • 139.701 mm (164)
  • 174.601 mm (56)
  • 209.601 mm (43)
  • 222.3 mm (26)
Minimum Axial Groove Diameter Min 받는 사람 Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 in (54)
  • 0.44 in (2)
  • 0.453 in (2)
  • 0.728 in (2)
  • 0.73 in (2)
  • 0.8 in (1)
  • 0.866 in (2)
  • 1.0 in (2)
  • 1.024 in (2)
  • 1.125 in (2)
  • 1.339 in (4)
  • 1.375 in (4)
  • 1.627 in (28)
  • 1.732 in (2)
  • 1.75 in (2)
  • 1.874 in (26)
  • 2.0 in (2)
  • 2.126 in (3)
  • 2.2 in (1)
  • 2.229 in (3)
  • 2.25 in (3)
  • 2.253 in (12)
  • 2.375 in (2)
  • 2.5 in (7)
  • 2.75 in (2)
  • 2.757 in (1)
  • 3.0 in (1)
  • 3.5 in (139)
  • 5.5 in (164)
  • 6.875 in (56)
  • 8.252 in (43)
  • 8.752 in (26)
Minimum Axial Groove Diameter Min 받는 사람 Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 393.661 in (470)
Maximum Axial Groove Diameter Min 받는 사람 Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 9999.0 mm (470)
Maximum Axial Groove Diameter Min 받는 사람 Maximum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • E (51)
  • S (40)
Rake Angle Style
Rake Angle Style
  • NEUTRAL (ZERO) (91)
Maximum Bore Depth
Maximum Bore Depth
  • 1.0 in (7)
  • 1.23 in (1)
  • 1.232 in (1)
  • 1.29 in (1)
  • 1.5 in (1)
  • 1.891 in (2)
  • 2.0 in (14)
  • 2.5 in (3)
  • 2.52 in (2)
  • 3.0 in (2)
  • 3.15 in (2)
  • 3.938 in (4)
  • 4.0 in (6)
  • 5.0 in (3)
  • 5.039 in (2)
  • 6.0 in (2)
  • 6.299 in (3)
  • 7.0 in (2)
  • 7.875 in (1)
  • 8.0 in (4)
Maximum Bore Depth Min 받는 사람 Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 25.401 mm (7)
  • 31.25 mm (1)
  • 31.3 mm (1)
  • 32.775 mm (1)
  • 38.1 mm (1)
  • 48.0 mm (2)
  • 50.801 mm (14)
  • 63.5 mm (3)
  • 64.0 mm (2)
  • 76.2 mm (2)
  • 80.0 mm (2)
  • 100.0 mm (4)
  • 101.601 mm (6)
  • 127.0 mm (3)
  • 128.0 mm (2)
  • 152.4 mm (2)
  • 160.0 mm (3)
  • 177.8 mm (2)
  • 200.0 mm (1)
  • 203.201 mm (4)
Maximum Bore Depth Min 받는 사람 Maximum Bore Depth Max
Boring Bar Material
Boring Bar Material
  • S (44)
frontEnd
Clamp Style
Clamp Style
  • N (110)
Cutting Width
Cutting Width
  • 0.02 in (42)
  • 0.031 in (50)
  • 0.039 in (92)
  • 0.041 in (24)
  • 0.047 in (106)
  • 0.055 in (43)
  • 0.058 in (41)
  • 0.06 in (96)
  • 0.061 in (25)
  • 0.062 in (125)
  • 0.067 in (42)
  • 0.069 in (87)
  • 0.073 in (46)
  • 0.077 in (43)
  • 0.078 in (48)
  • 0.079 in (108)
  • 0.088 in (89)
  • 0.089 in (64)
  • 0.094 in (25)
  • 0.095 in (116)
  • 0.098 in (98)
  • 0.108 in (89)
  • 0.119 in (124)
  • 0.125 in (145)
  • 0.126 in (46)
  • 0.128 in (86)
  • 0.138 in (110)
  • 0.147 in (25)
  • 0.152 in (41)
  • 0.156 in (52)
  • 0.157 in (76)
  • 0.167 in (45)
  • 0.177 in (69)
  • 0.188 in (56)
  • 0.189 in (82)
  • 0.192 in (25)
  • 0.195 in (47)
  • 0.197 in (22)
  • 0.217 in (19)
  • 0.237 in (19)
  • 0.25 in (31)
Cutting Width Min 받는 사람 Cutting Width Max
Cutting Width
Cutting Width
  • 0.5 mm (42)
  • 0.775 mm (46)
  • 0.8 mm (43)
  • 1.0 mm (92)
  • 1.05 mm (24)
  • 1.201 mm (106)
  • 1.401 mm (43)
  • 1.475 mm (41)
  • 1.5 mm (96)
  • 1.55 mm (25)
  • 1.576 mm (125)
  • 1.701 mm (42)
  • 1.75 mm (87)
  • 1.826 mm (46)
  • 1.951 mm (43)
  • 1.975 mm (48)
  • 2.0 mm (108)
  • 2.2 mm (87)
  • 2.225 mm (25)
  • 2.25 mm (64)
  • 2.375 mm (25)
  • 2.401 mm (116)
  • 2.5 mm (98)
  • 2.75 mm (89)
  • 3.0 mm (124)
  • 3.176 mm (145)
  • 3.2 mm (46)
  • 3.25 mm (86)
  • 3.5 mm (110)
  • 3.725 mm (25)
  • 3.85 mm (41)
  • 3.95 mm (51)
  • 3.975 mm (24)
  • 4.0 mm (76)
  • 4.25 mm (45)
  • 4.5 mm (69)
  • 4.775 mm (56)
  • 4.801 mm (82)
  • 4.875 mm (25)
  • 4.95 mm (47)
  • 5.0 mm (22)
  • 5.5 mm (19)