M640 시리즈

필터 선택
Filters
필터 보기 위치
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (28)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (24)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (28)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (28)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (28)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (28)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (28)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (28)
  • M Stainless Steel (28)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (28)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (28)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (28)
  • K Cast Iron (27)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (27)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (26)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (26)
  • N Non-Ferrous Materials (15)
    • N1
      Wrought Aluminum (15)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (15)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (15)
  • S High-Temp Alloys (24)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (24)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (24)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (24)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (24)
  • H Hardened Materials (14)
    • H1
      Hardened Materials 44-48 HRC (14)
    • H2
      Hardened Materials 48-55 HRC (9)
    • H3
      Hardened Materials 56-60 HRC (9)
Select All Star
  • CN (12)
  • DE (18)
  • GB (1)
  • SG (2)
  • US (2)
Applications
Applications
  • Face Milling Face Milling (9)
Cutting Diameter
Cutting Diameter
  • 1.26 in (1)
  • 1.969 in (1)
  • 2.0 in (1)
  • 2.48 in (1)
  • 3.0 in (1)
  • 3.15 in (1)
  • 3.938 in (2)
  • 4.921 in (1)
Cutting Diameter Min 받는 사람 Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 32.0 mm (1)
  • 50.0 mm (1)
  • 50.801 mm (1)
  • 63.0 mm (1)
  • 76.2 mm (1)
  • 80.0 mm (1)
  • 100.0 mm (2)
  • 125.0 mm (1)
Cutting Diameter Min 받는 사람 Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 38.401 mm (1)
  • 56.401 mm (1)
  • 57.151 mm (1)
  • 69.4 mm (1)
  • 82.575 mm (1)
  • 86.4 mm (1)
  • 106.4 mm (2)
  • 131.4 mm (1)
Maximum Cutting Diameter Min 받는 사람 Maximum Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 1.512 in (1)
  • 2.221 in (1)
  • 2.25 in (1)
  • 2.732 in (1)
  • 3.251 in (1)
  • 3.402 in (1)
  • 4.189 in (2)
  • 5.173 in (1)
Maximum Cutting Diameter Min 받는 사람 Maximum Cutting Diameter Max
Cutting Length
Cutting Length
  • 4.801 mm (7)
  • 4.875 mm (2)
Cutting Length Min 받는 사람 Cutting Length Max
Cutting Length
Cutting Length
  • 0.189 in (7)
  • 0.192 in (2)
Cutting Length Min 받는 사람 Cutting Length Max
Reach
Reach
  • 1.5 in (1)
  • 1.575 in (3)
  • 1.969 in (3)
  • 2.0 in (1)
  • 2.48 in (1)
Reach Min 받는 사람 Reach Max
Reach
Reach
  • 38.1 mm (1)
  • 40.0 mm (3)
  • 50.0 mm (3)
  • 50.801 mm (1)
  • 63.0 mm (1)
Reach Min 받는 사람 Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 58.0 (9)
Tool Cutting Edge Angle Min 받는 사람 Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • A-Socket Head Cap Screw (4)
  • B-Cutter Retention Screw (4)
  • Weldon (1)
Number of Flutes
Number of Flutes
  • 10 (1)
  • 4 (2)
  • 5 (2)
  • 6 (1)
  • 7 (2)
  • 8 (1)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 3.0 (15)
  • 6.0 (30)
Cutting Edges Per Insert Min 받는 사람 Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 1.5 in (1)
  • 1.575 in (2)
  • 1.969 in (3)
  • 2.0 in (1)
  • 2.48 in (1)
  • 3.938 in (1)
Over All Length [L] Min 받는 사람 Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 38.1 mm (1)
  • 40.0 mm (2)
  • 50.0 mm (3)
  • 50.801 mm (1)
  • 63.0 mm (1)
  • 100.0 mm (1)
Over All Length [L] Min 받는 사람 Over All Length [L] Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.035 in (11)
  • 0.038 in (34)
Corner Radius Min 받는 사람 Corner Radius Max
Corner Radius
Corner Radius
  • 0.9 mm (11)
  • 0.976 mm (34)
Corner Radius Min 받는 사람 Corner Radius Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • THM (10)
  • THM-U (10)
  • TN2510 (9)
  • TN5515 (9)
  • TN6501 (9)
  • TN6502 (9)
  • TN6510 (11)
  • TN6520 (11)
  • TN6525 (13)
  • TN6540 (11)
  • TN7525 (9)
  • TN7535 (9)
  • WK15CM (11)
  • WP25PM (13)
  • WP35CM (9)
  • WP40PM (13)
  • WS30PM (10)
  • WS40PM (13)
Hand Of Tool
Hand Of Tool
  • R (9)
Wiper Insert
Wiper Insert
  • N (20)
  • Y (7)
frontEnd
Neck Diameter
Neck Diameter
  • 0.976 in (1)
Neck Diameter Min 받는 사람 Neck Diameter Max
Neck Diameter
Neck Diameter
  • 24.8 mm (1)
Neck Diameter Min 받는 사람 Neck Diameter Max
Center Cutting
Center Cutting
insertGeometry
Shape
Shape
  • H-HEXAGON 120 (27)
Insert IC Size
Insert IC Size
  • 10.9 mm (5)
  • 10.976 mm (14)
  • 11.0 mm (2)
  • 11.15 mm (6)
Insert IC Size Min 받는 사람 Insert IC Size Max
Insert IC Size
Insert IC Size
  • 0.429 in (5)
  • 0.432 in (14)
  • 0.433 in (2)
  • 0.439 in (6)
Insert IC Size Min 받는 사람 Insert IC Size Max
Chip Breaker CBMD
Chip Breaker CBMD
  • GD (20)
  • LD (7)
Cutting Tool Material
Cutting Tool Material
  • H W (27)
Tolerance Class
Tolerance Class
  • G (21)
  • P (6)
backEnd
Connection Type
Connection Type
  • CYLINDRICAL (1)
  • SHELL MILL (8)
Back-End Diameter
Back-End Diameter
  • 19.05 mm (1)
  • 22.0 mm (2)
  • 25.401 mm (1)
  • 27.0 mm (1)
  • 32.0 mm (3)
  • 40.0 mm (1)
Back-End Diameter Min 받는 사람 Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.75 in (1)
  • 0.866 in (2)
  • 1.0 in (1)
  • 1.063 in (1)
  • 1.26 in (3)
  • 1.575 in (1)
Back-End Diameter Min 받는 사람 Back-End Diameter Max
No filters matching ""
product-image
Please adjust the following properties from

ISO 카탈로그 번호

ANSI 카탈로그 번호

to find similar products.

The following files are available

Please select a file to download

Models

Product data

중복 항목을 생성하려고 합니다. . 진행하시겠습니까?
삭제하려고 합니다. 진행하시겠습니까?
삭제하려고 합니다. and all items within that folder. 진행하시겠습니까?
Are you sure you want to permanently delete these items?
의 이름을 변경하시겠습니까?

A folder with the name already exists .

유효한 이름을 입력하십시오.
중복에 대한 이름을 입력하십시오.
유효한 이름을 입력하십시오.
내 솔루션 페이지에 을(를) 추가하려고 합니다.. 진행하시겠습니까?

A folder with the name already exists .

유효한 이름을 입력하십시오.
사본 전송

Oops, you have used your own email address! Please enter another email address to proceed.

An active user does not exist under that email address. Please Click Here , to send a registration invitation to


유효한 이메일을 입력하십시오.
유효한 이름을 입력하십시오.
대시보드 정보를 보려면 로그인해야 합니다.
Session expired due to inactivity, please login again
장바구니에 추가하려는 제품()을 사용할 수 없습니다. 고객 서비스에 문의하십시오.
항목이 장바구니에 추가되었습니다.
DOWNLOAD TYPE:



. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO 카탈로그 번호 등급    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?