Country

언어

측정 단위

정가:

할인: %

정가:

$450.83 /각각

가격::

수량

Top Cut 4 • 4 x D • SLR Shank • Inch

Name: Top Cut 4 • 4 x D • SLR Shank • Inch
SKU: 5537923
Rating: 0 (0 reviews)

TC4 • 4 x D • SLR Shanks • Inch

Metric

Inch

SAP Material Number	5537923
ISO Catalog Number	TCF1000R4SLR100D
ANSI Catalog Number	TCF1000R4SLR100D
[D1] Drill Diameter M	25.4 mm
[D1] Drill Diameter M	1 in
[D1MAX] Drill Diameter Maximum	26.401 mm
[D1MAX] Drill Diameter Maximum	1.039 in
[D] Adapter / Shank / Bore Diameter	25.4 mm
[D] Adapter / Shank / Bore Diameter	1 in
[L1] Insert Gage Length	131.932 mm
[L1] Insert Gage Length	5.194 in
[L4] Maximum Drilling Depth	102.518 mm
[L4] Maximum Drilling Depth	4.036 in
[L5] Drill Point Length	0.918 mm
[L5] Drill Point Length	.0362 in
[LS] Shank Length	56 mm
[LS] Shank Length	2.204 in
[CS] Coolant Supply Size	1/4 - 18 NPT
[SSC] Insert Seat Size	D
Gage Insert	TCF080308DP
Gage Insert 2	TCF090305DC

모든 제품 변형 보기

사용 및 응용 분야

Shank - Cylindrical with Flat
Drilling
Drilling: Inclined Entry
Drilling: Inclined Exit
Drilling: X-Offset
드릴링: 볼록면
내부 쿨런트: 반경방향: 인덱서블 드릴링
드릴링: 막힌 홀
Chain Drilling
Drilling: Cross-Hole Drilling
Drilling: Half-Cylindrical Drilling
Drilling: Corner Drilling 45°

공작물 재료

P Steel

M Stainless Steel

K Cast Iron

N Non-Ferrous

S High-Temp Alloys

기계 측면

로드 중...

공작물 측면

로드 중...

TC4 • 인서트 선택 가이드

Material Group	Geometry	Light Machining		General Purpose		Heavy Machining
Material Group	Geometry	periphery insert	center insert	periphery insert	center insert	periphery insert	center insert
P1	V38/DU	WU25CH	WU40PH/WU20PH	WU40PH/WU20PH	WU40PH/WU20PH	WU40PH/WU20PH	WU40PH/WU20PH
P2–P4	V34/DU	WPK10CH	WU40PH/WU20PH	WU25CH/WU20PH	WU40PH/WU20PH	WU40PH/WU20PH	WU40PH/WU20PH
P5–P6	V36/DU	WU25CH	WU40PH/WU20PH	WU40PH/WU20PH	WU40PH/WU20PH	WU40PH/WU20PH	WU40PH/WU20PH
M1–M3	V36/DU	WU25CH	WU40PH/WU20PH	WU40PH/WU20PH	WU40PH/WU20PH	WU40PH/WU20PH	WU40PH/WU20PH
K1–K3	V34/DU	WPK10CH	WU40PH/WU20PH	WU40PH/WU20PH	WU40PH/WU20PH	WU40PH/WU20PH	WU40PH/WU20PH
N1–N4	V36	WN10PH	WN10PH	WN10PH	WN10PH	WN10PH	WN10PH
S1–S4	V38/DU	WU40PH/WU20PH	WU40PH/WU20PH	WU40PH/WU20PH	WU40PH/WU20PH	WU40PH/WU20PH	WU40PH/WU20PH

							Recommended Feed Rate per Revolution
Material Group	Geometry	Grade		Cutting Speed vc m/min			Tool Diameter	12,00 13,99 Insert Size A	14,00 18,99 Insert Size B	19,00 23,99 Insert Size C	24,00 29,99 Insert Size D
Material Group	Geometry	center	periphery	Min	Start	Max	Tool Diameter	12,00 13,99 Insert Size A	14,00 18,99 Insert Size B	19,00 23,99 Insert Size C	24,00 29,99 Insert Size D
P0	–V38	WU40PH	WU25CH	120	180	260	mm/rev	0,06–0,08	0,08–0,11	0,10–0,13	0,11–0,14
P0	–DU	WU20PH	WU20PH	90	150	200	mm/rev	–	–	0,07–0,10	0,08–0,10
P1	–V38	WU40PH	WU25CH	120	180	260	mm/rev	0,06–0,10	0,08–0,13	0,10–0,15	0,11–0,16
P1	–DU	WU20PH	WU20PH	90	150	200	mm/rev	–	–	0,07–0,11	0,08–0,11
P2	–V34	WU40PH	WU25CH	120	190	280	mm/rev	0,06–0,10	0,08–0,15	0,10–0,16	0,11–0,17
P2	–DU	WU20PH	WU20PH	90	150	220	mm/rev	–	–	0,07–0,12	0,08–0,13
P3	–V34	WU40PH	WPK10CH	120	200	310	mm/rev	0,08–0,15	0,10–0,16	0,11–0,18	0,12–0,20
P3	–DU	WU20PH	WU20PH	90	160	220	mm/rev	–	–	0,08–0,13	0,09–0,15
P4	–V34	WU40PH	WPK10CH	120	190	310	mm/rev	0,08–0,15	0,10–0,16	0,11–0,18	0,12–0,20
P4	–DU	WU20PH	WU20PH	90	150	220	mm/rev	–	–	0,08–0,13	0,09–0,15
P5	–V36	WU40PH	WU25CH	120	180	250	mm/rev	0,06–0,10	0,08–0,14	0,10–0,15	0,11–0,16
P5	–DU	WU20PH	WU20PH	90	150	220	mm/rev	–	–	0,07–0,11	0,08–0,12
P6	-V36	WU40PH	WU25CH	120	160	210	mm/rev	0,06–0,10	0,08–0,14	0,10–0,15	0,11–0,16
P6	–DU	WU20PH	WU20PH	90	130	165	mm/rev	–	–	0,07–0,11	0,08–0,12
M1	-V38	WU40PH	WU40PH	120	160	240	mm/rev	0,06–0,11	0,07–0,11	0,08–0,12	0,10–0,14
M1	–DU	WU20PH	WU20PH	90	130	190	mm/rev	–	–	0,06–0,09	0,07–0,10
M2	–V38	WU40PH	WU40PH	110	140	210	mm/rev	0,06–0,10	0,07–0,11	0,08–0,12	0,10–0,14
M2	–DU	WU20PH	WU20PH	110	140	190	mm/rev	–	–	0,06–0,09	0,07–0,10
M3	-V36	WU40PH	WU40PH	100	120	200	mm/rev	0,06–0,10	0,07–0,11	0,08–0,12	0,10–0,14
M3	–DU	WU20PH	WU20PH	80	100	160	mm/rev	–	–	0,06–0,09	0,07–0,10
K1	-V34	WU25CH	WPK10CH	120	200	280	mm/rev	0,08–0,14	0,08–0,16	0,10–0,18	0,12–0,24
K1	–DU	WU20PH	WU20PH	90	160	220	mm/rev	–	–	0,07–0,13	0,09–0,18
K2	–V34	WU40PH	WPK10CH	100	180	260	mm/rev	0,08–0,14	0,08–0,16	0,10–0,18	0,12–0,24
K2	–DU	WU20PH	WU20PH	80	140	200	mm/rev	–	–	0,07–0,13	0,09–0,18
K3	-V34	WU40PH	WPK10CH	100	170	240	mm/rev	0,08–0,14	0,08–0,16	0,10–0,18	0,12–0,24
K3	–DU	WU20PH	WU20PH	80	140	190	mm/rev	–	–	0,07–0,13	0,09–0,18
N1	-V36	WN10PH	WN10PH	250	350	500	mm/rev	0,06–0,10	0,08–0,14	0,10–0,15	0,11–0,16
N2	–V36	WN10PH	WN10PH	150	300	450	mm/rev	0,06–0,10	0,08–0,14	0,10–0,15	0,11–0,16
N3	-V36	WN10PH	WN10PH	80	120	150	mm/rev	0,06–0,10	0,07–0,11	0,08–0,12	0,10–0,14
S3	-V38	WU40PH	WU40PH	20	30	45	mm/rev	0,08–0,12	0,08–0,13	0,10–0,15	0,12–0,19
S3	–DU	WU20PH	WU20PH	20	30	40	mm/rev	–	–	0,07–0,11	0,09–0,14
S4	–V38	WU40PH	WU40PH	35	40	65	mm/rev	0,08–0,12	0,08–0,13	0,10 –0,15	0,12–0,19
S4	–DU	WU20PH	WU20PH	30	40	60	mm/rev	–	–	0,07–0,11	0,09–0,14

Material Group	Geometry	Grade		Cutting Speed vc m/min			Tool Diameter	30,00 36,99 Insert Size E	37,00 45,99 Insert Size F	46,00 56,99 Insert Size G	57,00 68,00 Insert Size H
Material Group	Geometry	center	periphery	Min	Start	Max	Tool Diameter	30,00 36,99 Insert Size E	37,00 45,99 Insert Size F	46,00 56,99 Insert Size G	57,00 68,00 Insert Size H
P0	–V38	WU40PH	WU25CH	120	180	260	mm/rev	0,13–0,16	0,15–0,18	0,16–0,23	0,17–0,24
P0	–DU	WU20PH	WU20PH	90	140	200	mm/rev	0,09–0,12	0,11–0,13	–	–
P1	–V38	WU40PH	WU25CH	120	180	260	mm/rev	0,13–0,17	0,15–0,19	0,16–0,24	0,17–0,25
P1	–DU	WU20PH	WU20PH	90	140	200	mm/rev	0,09–0,13	0,11–0,14	–	–
P2	–V34	WU40PH	WU25CH	120	190	280	mm/rev	0,13–0,20	0,15–0,21	0,16–0,28	0,17–0,30
P2	–DU	WU20PH	WU20PH	90	150	220	mm/rev	0,09–0,15	0,11–0,15	–	–
P3	–V34	WU40PH	WPK10CH	120	200	310	mm/rev	0,16–0,24	0,16–0,24	0,18–0,30	0,19–0,32
P3	–DU	WU20PH	WU20PH	90	160	250	mm/rev	0,12–0,16	0,12–0,18	–	–
P4	–V34	WU40PH	WPK10CH	120	190	310	mm/rev	0,14–0,22	0,16–0,24	0,18–0,30	0,19–0,32
P4	–DU	WU20PH	WU20PH	90	150	250	mm/rev	0,12–0,16	0,12–0,18	–	–
P5	–V36	WU40PH	WU25CH	120	180	250	mm/rev	0,13–0,18	0,15–0,20	0,16–0,28	0,17–0,30
P5	–DU	WU20PH	WU20PH	90	140	200	mm/rev	0,09–0,13	0,11–0,15	–	–
P6	-V36	WU40PH	WU25CH	120	160	210	mm/rev	0,13–0,18	0,15–0,20	0,16–0,28	0,17–0,29
P6	–DU	WU20PH	WU20PH	90	120	160	mm/rev	0,09–0,13	0,11–0,15	–	–
M1	-V38	WU40PH	WU40PH	120	160	240	mm/rev	0,12–0,17	0,14–0,21	0,16–0,23	0,16–0,24
M1	–DU	WU20PH	WU20PH	90	120	190	mm/rev	0,09–0,13	0,10–0,15	–	–
M2	–V38	WU40PH	WU40PH	110	140	210	mm/rev	0,12–0,17	0,14–0,21	0,16–0,23	0,16–0,24
M2	–DU	WU20PH	WU20PH	90	110	160	mm/rev	0,09–0,13	0,10–0,15	–	–
M3	-V36	WU40PH	WU40PH	100	120	200	mm/rev	0,12–0,17	0,14–0,21	0,16–0,23	0,16–0,24
M3	–DU	WU20PH	WU20PH	80	90	160	mm/rev	0,09–0,13	0,10–0,15	–	–
K1	-V34	WU25CH	WPK10CH	120	200	280	mm/rev	0,14–0,26	0,16–0,30	0,18–0,32	0,20–0,36
K1	–DU	WU20PH	WU20PH	90	160	220	mm/rev	0,10–0,19	0,12–0,22	–	–
K2	–V34	WU40PH	WPK10CH	100	180	260	mm/rev	0,14–0,26	0,16–0,30	0,18–0,32	0,20–0,36
K2	–DU	WU20PH	WU20PH	80	140	200	mm/rev	0,10–0,19	0,12–0,22	–	–
K3	-V34	WU40PH	WPK10CH	100	170	240	mm/rev	0,14–0,26	0,16–0,30	0,18–0,32	0,20–0,36
K3	–DU	WU20PH	WU20PH	80	130	190	mm/rev	0,10–0,19	0,12–0,22	–	–
N1	-V36	WN10PH	WN10PH	250	350	500	mm/rev	0,13–0,18	0,15–0,20	0,16–0,28	0,17–0,30
N2	–V36	WN10PH	WN10PH	150	300	450	mm/rev	0,13–0,18	0,15–0,20	0,16–0,28	0,17–0,30
N3	-V36	WN10PH	WN10PH	80	120	150	mm/rev	0,12–0,17	0,14–0,21	0,16–0,23	0,16–0,24
S3	-V38	WU40PH	WU40PH	20	30	45	mm/rev	0,14–0,21	0,16–0,24	0,18–0,26	0,20–0,30
S3	–DU	WU20PH	WU20PH	20	25	40	mm/rev	0,10–0,15	0,12–0,18	–	–
S4	–V38	WU40PH	WU40PH	35	40	65	mm/rev	0,14–0,21	0,16–0,24	0,18–0,26	0,20–0,30
S4	–DU	WU20PH	WU20PH	30	35	50	mm/rev	0,10–0,15	0,12–0,18	–	–

							Avanzamento al giro consigliato
		Grade		Cutting Speed vc m/min
Material Group	Geometry	center	periphery	Min	Start	Max	Tool Diameter	12,00 13,99 Insert Size A	14,00 18,99 Insert Size B	19,00 23,99 Insert Size C	24,00 29,99 Insert Size D
P0	–V38	WU40PH	WU25CH	120	180	260	mm/rev	0,06–0,08	0,08–0,11	0,10–0,13	0,11–0,14
P0	–DU	WU20PH	WU20PH	90	150	200	mm/rev	–	–	0.07–0.10	0.08–0.10
P1	–V38	WU40PH	WU25CH	120	180	260	mm/rev	0,06–0,10	0,08–0,13	0,10–0,15	0,11–0,16
P1	–DU	WU20PH	WU20PH	90	150	200	mm/rev	–	–	0.07–0.11	0.08–0.11
P2	–V34	WU40PH	WU25CH	120	190	280	mm/rev	0,06–0,10	0,08–0,15	0,10–0,16	0,11–0,17
P2	–DU	WU20PH	WU20PH	90	150	220	mm/rev	–	–	0.07–0.12	0.08–0.13
P3	–V34	WU40PH	WPK10CH	120	200	310	mm/rev	0,08–0,15	0,10–0,16	0,11–0,18	0,12–0,20
P3	–DU	WU20PH	WU20PH	90	160	220	mm/rev	–	–	0.08–0.13	0.09–0.15
P4	–V34	WU40PH	WPK10CH	120	190	310	mm/rev	0,08–0,15	0,10–0,16	0,11–0,18	0,12–0,20
P4	–DU	WU20PH	WU20PH	90	150	220	mm/rev	–	–	0.08–0.13	0.09–0.15
P5	–V36	WU40PH	WU25CH	120	180	250	mm/rev	0,06–0,10	0,08–0,14	0,10–0,15	0,11–0,16
P5	–DU	WU20PH	WU20PH	90	150	220	mm/rev	–	–	0.07–0.11	0.08–0.12
P6	-V36	WU40PH	WU25CH	120	160	210	mm/rev	0,06–0,10	0,08–0,14	0,10–0,15	0,11–0,16
P6	–DU	WU20PH	WU20PH	90	130	165	mm/rev	–	–	0.07–0.11	0.08–0.12
M1	-V38	WU40PH	WU40PH	120	160	240	mm/rev	0,06–0,11	0,07–0,11	0,08–0,12	0,10–0,14
M1	–DU	WU20PH	WU20PH	90	130	190	mm/rev	–	–	0.06–0.09	0.07–0.10
M2	–V38	WU40PH	WU40PH	110	140	210	mm/rev	0,06–0,10	0,07–0,11	0,08–0,12	0,10–0,14
M2	–DU	WU20PH	WU20PH	110	140	190	mm/rev	–	–	0.06–0.09	0.07–0.10
M3	-V36	WU40PH	WU40PH	100	120	200	mm/rev	0,06–0,10	0,07–0,11	0,08–0,12	0,10–0,14
M3	–DU	WU20PH	WU20PH	80	100	160	mm/rev	–	–	0.06–0.09	0.07–0.10
K1	-V34	WU25CH	WPK10CH	120	200	280	mm/rev	0,08–0,14	0,08–0,16	0,10–0,18	0,12–0,24
K1	–DU	WU20PH	WU20PH	90	160	220	mm/rev	–	–	0.07–0.13	0.09–0.18
K2	–V34	WU40PH	WPK10CH	100	180	260	mm/rev	0,08–0,14	0,08–0,16	0,10–0,18	0,12–0,24
K2	–DU	WU20PH	WU20PH	80	140	200	mm/rev	–	–	0.07–0.13	0.09–0.18
K3	-V34	WU40PH	WPK10CH	100	170	240	mm/rev	0,08–0,14	0,08–0,16	0,10–0,18	0,12–0,24
K3	–DU	WU20PH	WU20PH	80	140	190	mm/rev	–	–	0.07–0.13	0.09–0.18
N1	-V36	WN10PH	WN10PH	250	350	500	mm/rev	0,06–0,10	0,08–0,14	0,10–0,15	0,11–0,16
N2	–V36	WN10PH	WN10PH	150	300	450	mm/rev	0,06–0,10	0,08–0,14	0,10–0,15	0,11–0,16
N3	-V36	WN10PH	WN10PH	80	120	150	mm/rev	0,06–0,10	0,07–0,11	0,08–0,12	0,10–0,14
S3	-V38	WU40PH	WU40PH	20	30	45	mm/rev	0,08–0,12	0,08–0,13	0,10–0,15	0,12–0,19
S3	–DU	WU20PH	WU20PH	20	30	40	mm/rev	–	–	0.07–0.11	0.09–0.14
S4	–V38	WU40PH	WU40PH	35	40	65	mm/rev	0,08–0,12	0,08–0,13	0,10 –0,15	0,12–0,19
S4	–DU	WU20PH	WU20PH	30	40	60	mm/rev	–	–	0.07–0.11	0.09–0.14

Insert size	Diameter range mm (in)	2 x D/3 x D			4 x D			5 x D
Insert size	Diameter range mm (in)	X-offset value max. in mm (max. in inch)	D1 max value mm (in)	Hole tolerance mm (in)	X-offset value max. in mm (max. in inch)	D1 max value mm (in)	Hole tolerance mm (in)	X-offset value max. in mm (max. in inch)	D1 max value mm (in)	Hole tolerance mm (in)
A	12,00 13,99 (.473 .531)	0,5 (0.020)	D1 + 1mm (D1 + 0.039")	+/- 0,20 (+/- 0.008)	0,5 (0.020)	D1 + 1mm (D1 + 0.039")	+/- 0,35 (+/- 0.014)			+/- 0,35 (+/- 0.014)
B	14,00 18,99 (.563 .734)	0,5 (0.020)	D1 + 1mm (D1 + 0.039")	+/- 0,20 (+/- 0.008)	0,5 (0.020)	D1 + 1mm (D1 + 0.039")	+/- 0,35 (+/- 0.014)			+/- 0,35 (+/- 0.014)
C	19,00 23,99 (.750 .938)	0,5 (0.020)	D1 + 1mm (D1 + 0.039")	+/- 0,20 (+/- 0.008)	0,5 (0.020)	D1 + 1mm (D1 + 0.039")	+/- 0,35 (+/- 0.014)			+/- 0,35 (+/- 0.014)
D	24,00 29,99 (.969 1.156)	0,8 (0.031)	D1 + 1,6mm (D1 + 0.063")	+/- 0,20 (+/- 0.008)	0,8 (0.031)	D1 + 1mm (D1 + 0.039")	+/- 0,35 (+/- 0.014)			+/- 0,35 (+/- 0.014)
E	30,00 36,99 (1.188 1.438)	0,8 (0.031)	D1 + 1,6mm (D1 + 0.063")	+/- 0,20 (+/- 0.008)	0,8 (0.031)	D1 + 1mm (D1 + 0.039")	+/- 0,35 (+/- 0.014)			+/- 0,35 (+/- 0.014)
F	37,00 45,99 (1.469 1.750)	0,8 (0.031)	D1 + 1,6mm (D1 + 0.063")	+/- 0,25 (+/- 0.010)	0,8 (0.031)	D1 + 1mm (D1 + 0.039")	+/- 0,38 (+/- 0.015)			+/- 0,38 (+/- 0.015)
G	46,00 56,99 (1.813 2.219)	1 (0.039)	D1 + 2mm (D1 + 0.079")	+/- 0,25 (+/- 0.010)	0,8 (0.031)	D1 + 1mm (D1 + 0.039")	+/- 0,38 (+/- 0.015)			+/- 0,38 (+/- 0.015)
H	57,00 68,00 (2.250 2.500)	1 (0.039)	D1 + 2mm (D1 + 0.079")	+/- 0,28 (+/- 0.011)	0,8 (0.031)	D1 + 1mm (D1 + 0.039")	+/- 0,42 (+/- 0.017)			+/- 0,42 (+/- 0.017)

Insert size	Diameter Range (mm)	2 x D and 3 x D		4 x D		5 x D
Insert size	Diameter Range (mm)	X-offset value max. in mm	D1 max value	X-offset value max. in mm	D1 max value	X-offset value max.	D1 max value
A	12,00 13,99	0,5	D1 + 1mm	0,5	D1 + 1mm
B	14,00 18,99	0,5	D1 + 1mm	0,5	D1 + 1mm
C	19,00 23,99	0,5	D1 + 1mm	0,5	D1 + 1mm
D	24,00 29,99	0,8	D1 + 1,6mm	0,8	D1 + 1mm
E	30,00 36,99	0,8	D1 + 1,6mm	0,8	D1 + 1mm
F	37,00 45,99	0,8	D1 + 1,6mm	0,8	D1 + 1mm
G	46,00 56,99	1	D1 + 2mm	0,8	D1 + 1mm
H	57,00 68,00	1	D1 + 2mm	0,8	D1 + 1mm

Insert size	Diameter range mm (in)	2 x D/3 x D		4 x D			5 x D
Insert size	Diameter range mm (in)	D1 max value mm (in)	Hole tolerance mm (in)	X-offset value max. in mm (max. in inch)	D1 max value mm (in)	Hole tolerance mm (in)	X-offset value max. in mm (max. in inch)	D1 max value mm (in)	Hole tolerance mm (in)
A	12,00 13,99 (.473 .531)	D1 + 1mm (D1 + 0.039")	+/- 0,20 (+/- 0.008)	0,5 (0.020)	D1 + 1mm (D1 + 0.039")	+/- 0,35 (+/- 0.014)			+/- 0,35 (+/- 0.014)
B	14,00 18,99 (.563 .734)	D1 + 1mm (D1 + 0.039")	+/- 0,20 (+/- 0.008)	0,5 (0.020)	D1 + 1mm (D1 + 0.039")	+/- 0,35 (+/- 0.014)			+/- 0,35 (+/- 0.014)
C	19,00 23,99 (.750 .938)	D1 + 1mm (D1 + 0.039")	+/- 0,20 (+/- 0.008)	0,5 (0.020)	D1 + 1mm (D1 + 0.039")	+/- 0,35 (+/- 0.014)			+/- 0,35 (+/- 0.014)
D	24,00 29,99 (.969 1.156)	D1 + 1,6mm (D1 + 0.063")	+/- 0,20 (+/- 0.008)	0,8 (0.031)	D1 + 1mm (D1 + 0.039")	+/- 0,35 (+/- 0.014)			+/- 0,35 (+/- 0.014)
E	30,00 36,99 (1.188 1.438)	D1 + 1,6mm (D1 + 0.063")	+/- 0,20 (+/- 0.008)	0,8 (0.031)	D1 + 1mm (D1 + 0.039")	+/- 0,35 (+/- 0.014)			+/- 0,35 (+/- 0.014)
F	37,00 45,99 (1.469 1.750)	D1 + 1,6mm (D1 + 0.063")	+/- 0,25 (+/- 0.010)	0,8 (0.031)	D1 + 1mm (D1 + 0.039")	+/- 0,38 (+/- 0.015)			+/- 0,38 (+/- 0.015)
G	46,00 56,99 (1.813 2.219)	D1 + 2mm (D1 + 0.079")	+/- 0,25 (+/- 0.010)	0,8 (0.031)	D1 + 1mm (D1 + 0.039")	+/- 0,38 (+/- 0.015)			+/- 0,38 (+/- 0.015)
H	57,00 68,00 (2.250 2.500)	D1 + 2mm (D1 + 0.079")	+/- 0,28 (+/- 0.011)	0,8 (0.031)	D1 + 1mm (D1 + 0.039")	+/- 0,42 (+/- 0.017)			+/- 0,42 (+/- 0.017)

Material Group	Geometry	Grade		Cutting Speed SFM			Tool Diameter	1.188 1.438” Insert Size E	1.469 1.750” Insert Size F	1.813 2.219” Insert Size G	2.250 2.500” Insert Size H
Material Group	Geometry	center	periphery	Min	Start	Max	Tool Diameter	1.188 1.438” Insert Size E	1.469 1.750” Insert Size F	1.813 2.219” Insert Size G	2.250 2.500” Insert Size H
P0	–V38	WU40PH	WU25CH	360	540	780	IPR	0.0051–0.0063	0.0059–0.0071	0.0063–0.0091	0.0067–0.0094
P0	– DU	WU20PH	WU20PH	290	430	624	IPR	0.0040–0.0050	0.0047–0.0057	–	–
P1	–V38	WU40PH	WU25CH	360	540	780	IPR	0.0051–0.0071	0.0059–0.0079	0.0063–0.0106	0.0067–0.0114
P1	– DU	WU20PH	WU20PH	290	430	625	IPR	0.0040–0.0057	0.0047–0.0063	–	–
P2	–V34	WU40PH	WU25CH	360	570	840	IPR	0.0051–0.0079	0.0059–0.0083	0.0063–0.0110	0.0067–0.0118
P2	– DU	WU20PH	WU20PH	290	450	675	IPR	0.0040–0.0063	0.0047–0.0063	–	–
P3	–V34	WU40PH	WPK10CH	360	600	930	IPR	0.0053–0.0094	0.0063–0.0094	0.0071–0.0118	0.0075–0.0126
P3	– DU	WU20PH	WU20PH	290	480	745	IPR	0.0042–0.0075	0.0050–0.0075	–	–
P4	–V34	WU40PH	WPK10CH	360	570	930	IPR	0.0055–0.0087	0.0063–0.0094	0.0071–0.0118	0.0075–0.0126
P4	– DU	WU20PH	WU20PH	290	450	745	IPR	0.0044–0.0069	0.0050–0.0075	–	–
P5	–V36	WU40PH	WU25CH	360	540	750	IPR	0.0051–0.0071	0.0059–0.0079	0.0063–0.0110	0.0067–0.0118
P5	– DU	WU20PH	WU20PH	290	430	600	IPR	0.0040–0.0057	0.0047–0.0063	–	–
P6	-V36	WU40PH	WU25CH	360	480	630	IPR	0.0051–0.0071	0.0059–0.0079	0.0063–0.0110	0.0067–0.0114
P6	- DU	WU20PH	WU20PH	290	380	500	IPR	0.0040-0.0057	0.0047-0.0063	-	-
M1	-V38	WU40PH	WU40PH	360	480	720	IPR	0.0047–0.0079	0.0055–0.0098	0.0063–0.0110	0.0063–0.0118
M1	- DU	WU20PH	WU20PH	290	385	575	IPR	0.0038-0.0063	0.0044-0.0078	-	-
M2	–V38	WU40PH	WU40PH	330	420	630	IPR	0.0047–0.0079	0.0055–0.0098	0.0063–0.0110	0.0063–0.0118
M2	– DU	WU20PH	WU20PH	265	330	500	IPR	0.0038–0.0063	0.0044–0.0078	–	–
M3	-V36	WU40PH	WU40PH	300	360	600	IPR	0.0047–0.0079	0.0055–0.0098	0.0063–0.0110	0.0063–0.0118
M3	- DU	WU20PH	WU20PH	240	290	480	IPR	0.0038-0.0063	0.0044-0.0098	-	-
K1	-V34	WU25CH	WPK10CH	360	600	840	IPR	0.0055–0.0102	0.0063–0.0118	0.0071–0.0126	0.0079–0.0142
K1	- DU	WU20PH	WU20PH	290	480	670	IPR	0.0044-0.0081	0.0050-0.0094	-	-
K2	–V34	WU40PH	WPK10CH	300	540	780	IPR	0.0055–0.0102	0.0063–0.0118	0.0071–0.0126	0.0079–0.0142
K2	– DU	WU20PH	WU20PH	240	430	625	IPR	0.0044–0.0081	0.0050–0.0094	–	–
K3	-V34	WU40PH	WPK10CH	300	510	720	IPR	0.0055–0.0102	0.0063–0.0118	0.0071–0.0126	0.0079–0.0142
K3	- DU	WU20PH	WU20PH	240	400	575	IPR	0.0044-0.0081	0.0050-0.0094	-	-
N1	-V36	WN10PH	WN10PH	750	1050	1500	IPR	0.0051–0.0071	0.0059–0.0079	0.0063–0.0110	0.0067–0.0118
N2	–V36	WN10PH	WN10PH	450	900	1350	IPR	0.0051–0.0071	0.0059–0.0079	0.0063–0.0110	0.0067–0.0118
N3	-V36	WN10PH	WN10PH	240	360	450	IPR	0.0047–0.0067	0.0055–0.0083	0.0063–0.0091	0.0063–0.0094
S3	-V38	WU40PH	WU40PH	60	90	135	IPR	0.0055–0.0083	0.0063–0.0094	0.0071–0.0102	0.0079–0.0118
S3	- DU	WU20PH	WU20PH	50	70	100	IPR	0.0044-0.083	0.0050-0.0075	-	-
S4	–V38	WU40PH	WU40PH	105	120	195	IPR	0.0055–0.0083	0.0063–0.0094	0.0071–0.0102	0.0079–0.0118
S4	– DU	WU20PH	WU20PH	85	95	150	IPR	0.0044–0.0664	0.0050–0.0075	–	–

							Recommended Feed Rate per Revolution
Material Group	Geometry	Grade		Cutting Speed SFM			Tool Diameter	.473 .531" Insert Size A	.563 .734" Insert Size B	.750 .938" Insert Size C	.969 1.156" Insert Size D
Material Group	Geometry	center	periphery	Min	Start	Max	Tool Diameter	.473 .531" Insert Size A	.563 .734" Insert Size B	.750 .938" Insert Size C	.969 1.156" Insert Size D
P0	–V38	WU40PH	WU25CH	360	540	780	IPR	0.0024–0.0031	0.0031–0.0043	0.0039–0.0051	0.0043–0.0055
P0	– DU	WU20PH	WU20PH	290	430	625	IPR	–	–	0.0031–0.0041	0.0034–0.0044
P1	–V38	WU40PH	WU25CH	360	540	780	IPR	0.0024–0.0039	0.0031–0.0051	0.0039–0.0059	0.0043–0.0063
P1	– DU	WU20PH	WU20PH	290	430	625	IPR	–	–	0.0031–0.0047	0.0034–0.0050
P2	–V34	WU40PH	WU25CH	360	570	840	IPR	0.0024–0.0039	0.0031–0.0059	0.0039–0.0063	0.0043–0.0067
P2	– DU	WU20PH	WU20PH	290	450	675	IPR	–	–	0.0031–0.0050	0.0034–0.0054
P3	–V34	WU40PH	WPK10CH	360	600	930	IPR	0.0031–0.0059	0.0039–0.0063	0.0043–0.0071	0.0047–0.0079
P3	– DU	WU20PH	WU20PH	290	480	745	IPR	–	–	0.0034–0.0067	0.0037–0.0063
P4	–V34	WU40PH	WPK10CH	360	570	930	IPR	0.0031–0.0059	0.0039–0.0063	0.0043–0.0071	0.0047–0.0079
P4	– DU	WU20PH	WU20PH	290	450	745	IPR	–	–	0.0034–0.0067	0.0037–0.0063
P5	–V36	WU40PH	WU25CH	360	540	750	IPR	0.0024–0.0039	0.0031–0.0055	0.0039–0.0059	0.0043–0.0063
P5	– DU	WU20PH	WU20PH	290	430	600	IPR	–	–	0.0031–0.0047	0.0034–0.0050
P6	-V36	WU40PH	WU25CH	360	480	630	IPR	0.0024–0.0039	0.0031–0.0055	0.0039–0.0059	0.0043–0.0063
P6	-V36	WU40PH	WU25CH	290	385	500	IPR	-	-	0.0031-0.0047	0.0034-0.0050
M1	-V38	WU40PH	WU40PH	360	480	720	IPR	0.0024–0.0047	0.0028–0.0051	0.0031–0.0059	0.0039–0.0063
M1	- DU	WU20PH	WU20PH	290	385	575	IPR	-	-	0.0025-0.0047	0.0031-0.0050
M2	–V38	WU40PH	WU40PH	330	420	630	IPR	0.0024–0.0047	0.0028–0.0051	0.0031–0.0059	0.0039–0.0063
M2	– DU	WU20PH	WU20PH	265	340	500	IPR	–	–	0.0025–0.0047	0.0031–0.0050
M3	-V36	WU40PH	WU40PH	300	360	600	IPR	0.0024–0.0047	0.0028–0.0051	0.0031–0.0059	0.0039–0.0063
M3	- DU	WU20PH	WU20PH	240	290	480	IPR	-	-	0.0025-0.0047	0.0031-0.0050
K1	-V34	WU25CH	WPK10CH	360	600	840	IPR	0.0031–0.0055	0.0031–0.0063	0.0039–0.0071	0.0047–0.0094
K1	- DU	WU20PH	WU20PH	290	480	675	IPR	-	-	0.0031-0.0057	0.0038-0.0075
K2	–V34	WU40PH	WPK10CH	300	540	780	IPR	0.0031–0.0055	0.0031–0.0063	0.0039–0.0071	0.0047–0.0094
K2	– DU	WU20PH	WU20PH	240	430	625	IPR	–	–	0.0031–0.0057	0.0038–0.0075
K3	-V34	WU40PH	WPK10CH	300	510	720	IPR	0.0031–0.0055	0.0031–0.0063	0.0039–0.0071	0.0047–0.0094
K3	- DU	WU20PH	WU20PH	240	400	575	IPR	-	-	0.0031-0.0057	0.0038-0.0075
N1	-V36	WN10PH	WN10PH	750	1050	1500	IPR	0.0024–0.0039	0.0031–0.0055	0.0039–0.0059	0.0043–0.0063
N2	–V36	WN10PH	WN10PH	450	900	1350	IPR	0.0024–0.0039	0.0031–0.0055	0.0039–0.0059	0.0043–0.0063
N3	-V36	WN10PH	WN10PH	240	360	450	IPR	0.0024–0.0039	0.0028–0.0043	0.0031–0.0047	0.0039–0.0055
S3	-V38	WU40PH	WU40PH	60	90	135	IPR	0.0031–0.0047	0.0031–0.0051	0.0039–0.0059	0.0047–0.0075
S3	- DU	WU20PH	WU20PH	50	70	100	IPR	-	-	0.0031-0.0047	0.0038-0.006
S4	–V38	WU40PH	WU40PH	105	120	195	IPR	0.0031–0.0047	0.0031–0.0051	0.0039–0.0059	0.0047–0.0075
S4	– DU	WU20PH	WU20PH	85	95	150	IPR	–	–	0.0031–0.0047	0.0038–0.006

							Recommended Feed Rate per Revolution
Material Group	Geometry	Grade		Cutting Speed SFM			Tool Diameter	.473 .531" Insert Size A	.563 .734" Insert Size B	.750 .938" Insert Size C	.969 1.156" Insert Size D
Material Group	Geometry	center	periphery	Min	Start	Max	Tool Diameter	.473 .531" Insert Size A	.563 .734" Insert Size B	.750 .938" Insert Size C	.969 1.156" Insert Size D
P0	–V38	WU40PH	WU25CH	360	540	780	IPR	0.0024–0.0031	0.0031–0.0043	0.0039–0.0051	0.0043–0.0055
P0	– DU	WU20PH	WU20PH	290	430	625	IPR	–	–	0.0031–0.0041	0.0034–0.0044
P1	–V38	WU40PH	WU25CH	360	540	780	IPR	0.0024–0.0039	0.0031–0.0051	0.0039–0.0059	0.0043–0.0063
P1	– DU	WU20PH	WU20PH	290	430	625	IPR	–	–	0.0031–0.0047	0.0034–0.0050
P2	–V34	WU40PH	WU25CH	360	570	840	IPR	0.0024–0.0039	0.0031–0.0059	0.0039–0.0063	0.0043–0.0067
P2	– DU	WU20PH	WU20PH	290	450	675	IPR	–	–	0.0031–0.0050	0.0034–0.0054
P3	–V34	WU40PH	WPK10CH	360	600	930	IPR	0.0031–0.0059	0.0039–0.0063	0.0043–0.0071	0.0047–0.0079
P3	– DU	WU20PH	WU20PH	290	480	745	IPR	–	–	0.0034–0.0067	0.0037–0.0063
P4	–V34	WU40PH	WPK10CH	360	570	930	IPR	0.0031–0.0059	0.0039–0.0063	0.0043–0.0071	0.0047–0.0079
P4	– DU	WU20PH	WU20PH	290	450	745	IPR	–	–	0.0034–0.0067	0.0037–0.0063
P5	–V36	WU40PH	WU25CH	360	540	750	IPR	0.0024–0.0039	0.0031–0.0055	0.0039–0.0059	0.0043–0.0063
P5	– DU	WU20PH	WU20PH	290	430	600	IPR	–	–	0.0031–0.0047	0.0034–0.0050
P6	-V36	WU40PH	WU25CH	360	480	630	IPR	0.0024–0.0039	0.0031–0.0055	0.0039–0.0059	0.0043–0.0063
P6	-V36	WU40PH	WU25CH	290	385	500	IPR	-	-	0.0031-0.0047	0.0034-0.0050
M1	-V38	WU40PH	WU40PH	360	480	720	IPR	0.0024–0.0047	0.0028–0.0051	0.0031–0.0059	0.0039–0.0063
M1	- DU	WU20PH	WU20PH	290	385	575	IPR	-	-	0.0025-0.0047	0.0031-0.0050
M2	–V38	WU40PH	WU40PH	330	420	630	IPR	0.0024–0.0047	0.0028–0.0051	0.0031–0.0059	0.0039–0.0063
M2	– DU	WU20PH	WU20PH	265	340	500	IPR	–	–	0.0025–0.0047	0.0031–0.0050
M3	-V36	WU40PH	WU40PH	300	360	600	IPR	0.0024–0.0047	0.0028–0.0051	0.0031–0.0059	0.0039–0.0063
M3	- DU	WU20PH	WU20PH	240	290	480	IPR	-	-	0.0025-0.0047	0.0031-0.0050
K1	-V34	WU25CH	WPK10CH	360	600	840	IPR	0.0031–0.0055	0.0031–0.0063	0.0039–0.0071	0.0047–0.0094
K1	- DU	WU20PH	WU20PH	290	480	675	IPR	-	-	0.0031-0.0057	0.0038-0.0075
K2	–V34	WU40PH	WPK10CH	300	540	780	IPR	0.0031–0.0055	0.0031–0.0063	0.0039–0.0071	0.0047–0.0094
K2	– DU	WU20PH	WU20PH	240	430	625	IPR	–	–	0.0031–0.0057	0.0038–0.0075
K3	-V34	WU40PH	WPK10CH	300	510	720	IPR	0.0031–0.0055	0.0031–0.0063	0.0039–0.0071	0.0047–0.0094
K3	- DU	WU20PH	WU20PH	240	400	575	IPR	-	-	0.0031-0.0057	0.0038-0.0075
N1	-V36	WN10PH	WN10PH	750	1050	1500	IPR	0.0024–0.0039	0.0031–0.0055	0.0039–0.0059	0.0043–0.0063
N2	–V36	WN10PH	WN10PH	450	900	1350	IPR	0.0024–0.0039	0.0031–0.0055	0.0039–0.0059	0.0043–0.0063
N3	-V36	WN10PH	WN10PH	240	360	450	IPR	0.0024–0.0039	0.0028–0.0043	0.0031–0.0047	0.0039–0.0055
S3	-V38	WU40PH	WU40PH	60	90	135	IPR	0.0031–0.0047	0.0031–0.0051	0.0039–0.0059	0.0047–0.0075
S3	- DU	WU20PH	WU20PH	50	70	100	IPR	-	-	0.0031-0.0047	0.0038-0.006
S4	–V38	WU40PH	WU40PH	105	120	195	IPR	0.0031–0.0047	0.0031–0.0051	0.0039–0.0059	0.0047–0.0075
S4	– DU	WU20PH	WU20PH	85	95	150	IPR	–	–	0.0031–0.0047	0.0038–0.006

예비 부품 for Top Cut 4 • 4 x D • SLR Shank • Inch

INSERT SCREW (M2.5-0.45p x 5.9)

Spare Part TORX DRIVER

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

SAP Material Number	ISO 카탈로그 번호	등급

환영합니다

기본 설정을 확인해 주십시오

기본 설정 업데이트

제품 제안

Product Family suggestions

영업팀에 문의

영업팀에 문의

솔루션 수정

솔루션 추가