Country

언어

측정 단위

정가:

할인: %

정가:

$839.46 /각각

가격::

수량

SDS

VSM490-15 • 쉘밀 • 일본 산업 표준(JIS) • Metric

Name: VSM490-15 • 쉘밀 • 일본 산업 표준(JIS) • Metric
SKU: 6342806
Rating: 0 (0 reviews)

쉘밀 • 일본 산업 표준(JIS)

Metric

Inch

SAP Material Number	6342806
ISO Catalog Number	VSM490D080Z05S254XN15JIS
ANSI Catalog Number	VSM490D080Z05S254XN15JIS
[D1] Effective Cutting Diameter	80 mm
[D1] Effective Cutting Diameter	3.15 in
[D] Adapter / Shank / Bore Diameter	25.4 mm
[D] Adapter / Shank / Bore Diameter	1 in
[D6] Hub Diameter	50 mm
[D6] Hub Diameter	1.969 in
[L] Overall Length	50 mm
[L] Overall Length	1.969 in
[AP1MAX] 1st Maximum Cutting Depth	15 mm
[AP1MAX] 1st Maximum Cutting Depth	.591 in
Number of Inserts	5
Max RPM	12300
Coolant Supply	Y
Weight Kilograms	0.89

모든 제품 변형 보기

사용 및 응용 분야

100018357
100018358
슬로팅: 스퀘어 엔드
밀링 — 내부 쿨런트
사이드 밀링/숄더 밀링: 스퀘어 엔드
포켓팅

공작물 재료

P Steel

M Stainless Steel

K Cast Iron

N Non-Ferrous

S High-Temp Alloys

H Hardened Materials

특징 및 장점

하나의 공구에 정삭 성능이 임베드된 진정한 90° 황삭 공구
축방향 스텝 다운 작업에서 동급 최고의 벽면 조도
낮아진 절삭 부하 및 부드러운 절삭 동작
40 테이퍼 스핀들 및 구동 유닛에 매우 적합
콜스, 중간 및 파인 피치 밀도 사용 가능
일반 산업 표준 JIS를 준수하는 커터 사용 가능

기계 측면

로드 중...

공작물 측면

로드 중...

인서트 선택 가이드

	Light Machining		General Purpose		Heavy Machining
Material Group	Geometry	Grade	Geometry	Grade	Geometry	Grade
P1–P2	XNGU-ML	WP40PM	XNPU-MM	WP40PM	XNPU-MM	WP40PM
P3–P4	XNGU-ML	WP40PM	XNPU-MM	WP40PM	XNPU-MM	WP40PM
P5–P6	XNGU-MM	WP25PM	XNPU-MM	WP35CM	XNPU-MM	WP40PM
M1–M2	XNGU-ML	WS40PM	XNGU-ML	WS40PM	XNPU-MM	WS40PM
M3	XNGU-ML	WS40PM	XNGU-ML	WS40PM	XNPU-MM	WS40PM
K1–K2	XNPU-MM	WK15PM	XNGU-MH	WK15CM	XNGU-MH	WK15CM
K3	XNPU-MM	WK15PM	XNGU-MH	WP35CM	XNGU-MH	WP35CM
N1–N2	XNGU-ALP	WN25PM	XNGU-ALP	WN25PM	XNGU-ALP	WN25PM
N3	XNGU-ALP	WN25PM	XNGU-ALP	WN25PM	XNGU-ALP	WN25PM
S1–S2	XNGU-ML	WP25PM	XNGU-ML	WS40PM	XNPU-MM	WS40PM
S3	XNGU-ML	WS40PM	XNGU-ML	WS40PM	XNPU-MM	WS40PM
S4	XNGU-ML	WS40PM	XNGU-ML	WS40PM	XNPU-MM	WS40PM
H1	–	–	–	–	–	–

권장 초기 이송[mm]

	Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae)
Insert Geometry	5%			10%			20%			30%			40–100%			Insert Geometry
.E..ALP	0,11	0,23	0,35	0,08	0,17	0,25	0,06	0,13	0,19	0,05	0,11	0,16	0,05	0,10	0,15	.E..ALP
.E..ML	0,17	0,31	0,46	0,13	0,23	0,33	0,09	0,17	0,25	0,08	0,15	0,22	0,08	0,14	0,20	.E..ML
.S..MM	0,22	0,40	0,64	0,16	0,29	0,46	0,12	0,22	0,34	0,10	0,19	0,30	0,10	0,18	0,28	.S..MM
.S..MH	0,23	0,45	0,74	0,17	0,33	0,54	0,13	0,24	0,40	0,11	0,21	0,35	0,10	0,20	0,32	.S..MH

Light Machining

General Purpose

Heavy Machining

Recommended Starting Feeds [IPT]

	Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae)
Insert Geometry	5%			10%			20%			30%			40–100%			Insert Geometry
.E..ALP	.005	.008	.012	.003	.006	.009	.002	.004	.007	.002	.004	.006	.002	.004	.005	.E..ALP
.E..ML	.007	.012	.018	.005	.009	.013	.004	.006	.010	.003	.006	.008	.003	.005	.008	.E..ML
.S..MM	.008	.015	.024	.006	.011	.017	.005	.008	.013	.004	.007	.011	.004	.007	.010	.S..MM
.S..MH	.009	.017	.028	.006	.012	.020	.005	.009	.015	.004	.008	.013	.004	.007	.012	.S..MH

Light Machining

General Purpose

Heavy Machining

권장 시작 속도[m/min]*

Material Group		WK15CM			WK15PM			WN25PM			WP25PM			WP35CM			WP40PM			WS40PM			WU35PM
P	1	–	–	–	–	–	–	–	–	–	330	285	270	455	395	370	295	260	245	–	–	–	260	230	215
	2	–	–	–	–	–	–	–	–	–	275	240	200	280	255	230	250	215	180	–	–	–	220	190	160
	3	–	–	–	–	–	–	–	–	–	255	215	175	255	230	205	230	195	160	–	–	–	200	170	140
	4	–	–	–	–	–	–	–	–	–	225	185	150	190	175	160	205	170	135	–	–	–	180	150	120
	5	–	–	–	–	–	–	–	–	–	185	170	150	260	230	210	170	155	135	170	145	120	150	135	120
	6	–	–	–	–	–	–	–	–	–	165	125	100	160	135	110	150	115	90	150	110	80	130	100	80
M	1	–	–	–	–	–	–	–	–	–	205	180	165	205	185	155	195	170	155	210	170	140	170	150	135
	2	–	–	–	–	–	–	–	–	–	185	160	130	185	160	140	175	150	125	180	145	120	155	130	110
	3	–	–	–	–	–	–	–	–	–	140	120	95	145	130	115	130	115	90	145	110	85	115	100	80
K	1	420	385	340	270	245	215	–	–	–	230	205	185	295	265	240	–	–	–	–	–	–	–	–	–
	2	335	295	275	210	190	175	–	–	–	180	160	150	235	210	190	–	–	–	–	–	–	–	–	–
	3	280	250	230	175	160	145	–	–	–	150	135	120	195	175	160	–	–	–	–	–	–	–	–	–
N	1	–	–	–	–	–	–	1075	945	875	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	945	875	760	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	945	875	760	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
S	1	–	–	–	–	–	–	–	–	–	40	35	25	–	–	–	–	–	–	40	35	25	35	30	25
	2	–	–	–	–	–	–	–	–	–	40	35	25	–	–	–	–	–	–	40	35	25	35	30	25
	3	–	–	–	–	–	–	–	–	–	50	40	25	–	–	–	–	–	–	50	40	25	45	35	25
	4	–	–	–	–	–	–	–	–	–	70	50	35	–	–	–	–	–	–	60	50	30	60	45	30
H	1	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–

Recommended Starting Speeds [SFM]*

Material Group		WK15CM			WK15PM			WN25PM			WP25PM			WP35CM			WP40PM			WS40PM			WU35PM
P	1	–	–	–	–	–	–	–	–	–	1085	935	885	1495	1295	1215	970	855	805	–	–	–	855	755	705
	2	–	–	–	–	–	–	–	–	–	900	785	655	920	835	755	820	705	590	–	–	–	720	625	525
	3	–	–	–	–	–	–	–	–	–	835	705	575	835	755	675	755	640	525	–	–	–	655	560	460
	4	–	–	–	–	–	–	–	–	–	740	605	490	625	575	525	675	560	445	–	–	–	590	490	395
	5	–	–	–	–	–	–	–	–	–	605	560	490	855	755	690	560	510	445	560	475	395	490	445	395
	6	–	–	–	–	–	–	–	–	–	540	410	330	525	445	360	490	375	295	490	360	260	425	330	260
M	1	–	–	–	–	–	–	–	–	–	675	590	540	675	605	510	640	560	510	690	560	460	560	490	445
	2	–	–	–	–	–	–	–	–	–	605	525	425	605	525	460	575	490	410	590	475	395	510	425	360
	3	–	–	–	–	–	–	–	–	–	460	395	310	475	425	375	425	375	295	475	360	280	375	330	260
K	1	1380	1265	1115	885	805	705	–	–	–	755	675	605	970	870	785	–	–	–	–	–	–	–	–	–
	2	1100	970	900	690	625	575	–	–	–	590	525	490	770	690	625	–	–	–	–	–	–	–	–	–
	3	920	820	755	575	525	475	–	–	–	490	445	395	640	575	525	–	–	–	–	–	–	–	–	–
N	1	–	–	–	–	–	–	3525	3100	2870	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	3100	2870	2495	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	3100	2870	2495	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
S	1	–	–	–	–	–	–	–	–	–	130	115	80	–	–	–	130	115	100	130	115	80	115	100	80
	2	–	–	–	–	–	–	–	–	–	130	115	80	–	–	–	130	115	100	130	115	80	115	100	80
	3	–	–	–	–	–	–	–	–	–	165	130	80	–	–	–	165	130	100	165	130	80	150	115	80
	4	–	–	–	–	–	–	–	–	–	230	165	115	–	–	–	215	165	115	195	165	100	195	150	100
H	1	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–

예비 부품 for VSM490-15 • 쉘밀 • 일본 산업 표준(JIS) • Metric

Spare Part ANTI-SEIZE LUBRICANT

SCREW FOR MILLER

TORX PLUS DRIVE WRENCH

SHCS W/COOLANT GROOVE

SCREW TORX PLUS M4X10-TXP15

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

SAP Material Number	ISO 카탈로그 번호	등급

환영합니다

기본 설정을 확인해 주십시오

기본 설정 업데이트

제품 제안

Product Family suggestions

영업팀에 문의

영업팀에 문의

솔루션 수정

솔루션 추가