Country

언어

측정 단위

정가:

할인: %

정가:

$27.72 /각각

가격::

수량

Inserts • XNGU-ALP • For Aluminum and Other Non-Ferrous Alloys

SDS

VSM490-15™ • XNGU-ALP • 알루미늄 및 기타 비철 합금용

Name: VSM490-15™ • XNGU-ALP • 알루미늄 및 기타 비철 합금용
SKU: 6082644
Rating: 0 (0 reviews)

Inserts • XNGU-ALP • For Aluminum and Other Non-Ferrous Alloys

Metric

Inch

SAP Material Number	6082644
ISO Catalog Number	XNGU15T604ERALP
ANSI Catalog Number	XNGU1501ERALP
Grade	WN25PM
Cutting Edges per Insert	4
[LI] Insert Length	16.2 mm
[LI] Insert Length	.638 in
[S] Insert Thickness	6.88 mm
[S] Insert Thickness	.271 in
[W] Insert Width	10 mm
[W] Insert Width	.394 in
[BS] Corner Facet Length	2.2 mm
[BS] Corner Facet Length	.088 in
[Rε] Corner Radius	0.4 mm
[Rε] Corner Radius	.0156 in
Average Chip Thickness [HM]	0.03 mm
Average Chip Thickness [HM]	.0012 in

모든 제품 변형 보기

공작물 재료

N Non-Ferrous

특징 및 장점

-ALP는 알루미늄 및 기타 비철 합금 밀링을 위한 1차 선택

기계 측면

로드 중...

공작물 측면

로드 중...

인서트 선택 가이드

	Light Machining		General Purpose		Heavy Machining
Material Group	Geometry	Grade	Geometry	Grade	Geometry	Grade
P1–P2	XNGU-ML	WP40PM	XNPU-MM	WP40PM	XNPU-MM	WP40PM
P3–P4	XNGU-ML	WP40PM	XNPU-MM	WP40PM	XNPU-MM	WP40PM
P5–P6	XNGU-MM	WP25PM	XNPU-MM	WP35CM	XNPU-MM	WP40PM
M1–M2	XNGU-ML	WS40PM	XNGU-ML	WS40PM	XNPU-MM	WS40PM
M3	XNGU-ML	WS40PM	XNGU-ML	WS40PM	XNPU-MM	WS40PM
K1–K2	XNPU-MM	WK15PM	XNGU-MH	WK15CM	XNGU-MH	WK15CM
K3	XNPU-MM	WK15PM	XNGU-MH	WP35CM	XNGU-MH	WP35CM
N1–N2	XNGU-ALP	WN25PM	XNGU-ALP	WN25PM	XNGU-ALP	WN25PM
N3	XNGU-ALP	WN25PM	XNGU-ALP	WN25PM	XNGU-ALP	WN25PM
S1–S2	XNGU-ML	WP25PM	XNGU-ML	WS40PM	XNPU-MM	WS40PM
S3	XNGU-ML	WS40PM	XNGU-ML	WS40PM	XNPU-MM	WS40PM
S4	XNGU-ML	WS40PM	XNGU-ML	WS40PM	XNPU-MM	WS40PM
H1	–	–	–	–	–	–

권장 초기 이송[mm]

	Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae)
Insert Geometry	5%			10%			20%			30%			40–100%			Insert Geometry
.E..ALP	0,11	0,23	0,35	0,08	0,17	0,25	0,06	0,13	0,19	0,05	0,11	0,16	0,05	0,10	0,15	.E..ALP
.E..ML	0,17	0,31	0,46	0,13	0,23	0,33	0,09	0,17	0,25	0,08	0,15	0,22	0,08	0,14	0,20	.E..ML
.S..MM	0,22	0,40	0,64	0,16	0,29	0,46	0,12	0,22	0,34	0,10	0,19	0,30	0,10	0,18	0,28	.S..MM
.S..MH	0,23	0,45	0,74	0,17	0,33	0,54	0,13	0,24	0,40	0,11	0,21	0,35	0,10	0,20	0,32	.S..MH

Light Machining

General Purpose

Heavy Machining

Recommended Starting Feeds [IPT]

	Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae)
Insert Geometry	5%			10%			20%			30%			40–100%			Insert Geometry
.E..ALP	.005	.008	.012	.003	.006	.009	.002	.004	.007	.002	.004	.006	.002	.004	.005	.E..ALP
.E..ML	.007	.012	.018	.005	.009	.013	.004	.006	.010	.003	.006	.008	.003	.005	.008	.E..ML
.S..MM	.008	.015	.024	.006	.011	.017	.005	.008	.013	.004	.007	.011	.004	.007	.010	.S..MM
.S..MH	.009	.017	.028	.006	.012	.020	.005	.009	.015	.004	.008	.013	.004	.007	.012	.S..MH

Light Machining

General Purpose

Heavy Machining

권장 시작 속도[m/min]*

Material Group		WK15CM			WK15PM			WN25PM			WP25PM			WP35CM			WP40PM			WS40PM			WU35PM
P	1	–	–	–	–	–	–	–	–	–	330	285	270	455	395	370	295	260	245	–	–	–	260	230	215
	2	–	–	–	–	–	–	–	–	–	275	240	200	280	255	230	250	215	180	–	–	–	220	190	160
	3	–	–	–	–	–	–	–	–	–	255	215	175	255	230	205	230	195	160	–	–	–	200	170	140
	4	–	–	–	–	–	–	–	–	–	225	185	150	190	175	160	205	170	135	–	–	–	180	150	120
	5	–	–	–	–	–	–	–	–	–	185	170	150	260	230	210	170	155	135	170	145	120	150	135	120
	6	–	–	–	–	–	–	–	–	–	165	125	100	160	135	110	150	115	90	150	110	80	130	100	80
M	1	–	–	–	–	–	–	–	–	–	205	180	165	205	185	155	195	170	155	210	170	140	170	150	135
	2	–	–	–	–	–	–	–	–	–	185	160	130	185	160	140	175	150	125	180	145	120	155	130	110
	3	–	–	–	–	–	–	–	–	–	140	120	95	145	130	115	130	115	90	145	110	85	115	100	80
K	1	420	385	340	270	245	215	–	–	–	230	205	185	295	265	240	–	–	–	–	–	–	–	–	–
	2	335	295	275	210	190	175	–	–	–	180	160	150	235	210	190	–	–	–	–	–	–	–	–	–
	3	280	250	230	175	160	145	–	–	–	150	135	120	195	175	160	–	–	–	–	–	–	–	–	–
N	1	–	–	–	–	–	–	1075	945	875	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	945	875	760	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	945	875	760	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
S	1	–	–	–	–	–	–	–	–	–	40	35	25	–	–	–	–	–	–	40	35	25	35	30	25
	2	–	–	–	–	–	–	–	–	–	40	35	25	–	–	–	–	–	–	40	35	25	35	30	25
	3	–	–	–	–	–	–	–	–	–	50	40	25	–	–	–	–	–	–	50	40	25	45	35	25
	4	–	–	–	–	–	–	–	–	–	70	50	35	–	–	–	–	–	–	60	50	30	60	45	30
H	1	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–

Recommended Starting Speeds [SFM]*

Material Group		WK15CM			WK15PM			WN25PM			WP25PM			WP35CM			WP40PM			WS40PM			WU35PM
P	1	–	–	–	–	–	–	–	–	–	1085	935	885	1495	1295	1215	970	855	805	–	–	–	855	755	705
	2	–	–	–	–	–	–	–	–	–	900	785	655	920	835	755	820	705	590	–	–	–	720	625	525
	3	–	–	–	–	–	–	–	–	–	835	705	575	835	755	675	755	640	525	–	–	–	655	560	460
	4	–	–	–	–	–	–	–	–	–	740	605	490	625	575	525	675	560	445	–	–	–	590	490	395
	5	–	–	–	–	–	–	–	–	–	605	560	490	855	755	690	560	510	445	560	475	395	490	445	395
	6	–	–	–	–	–	–	–	–	–	540	410	330	525	445	360	490	375	295	490	360	260	425	330	260
M	1	–	–	–	–	–	–	–	–	–	675	590	540	675	605	510	640	560	510	690	560	460	560	490	445
	2	–	–	–	–	–	–	–	–	–	605	525	425	605	525	460	575	490	410	590	475	395	510	425	360
	3	–	–	–	–	–	–	–	–	–	460	395	310	475	425	375	425	375	295	475	360	280	375	330	260
K	1	1380	1265	1115	885	805	705	–	–	–	755	675	605	970	870	785	–	–	–	–	–	–	–	–	–
	2	1100	970	900	690	625	575	–	–	–	590	525	490	770	690	625	–	–	–	–	–	–	–	–	–
	3	920	820	755	575	525	475	–	–	–	490	445	395	640	575	525	–	–	–	–	–	–	–	–	–
N	1	–	–	–	–	–	–	3525	3100	2870	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	3100	2870	2495	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	3100	2870	2495	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
S	1	–	–	–	–	–	–	–	–	–	130	115	80	–	–	–	130	115	100	130	115	80	115	100	80
	2	–	–	–	–	–	–	–	–	–	130	115	80	–	–	–	130	115	100	130	115	80	115	100	80
	3	–	–	–	–	–	–	–	–	–	165	130	80	–	–	–	165	130	100	165	130	80	150	115	80
	4	–	–	–	–	–	–	–	–	–	230	165	115	–	–	–	215	165	115	195	165	100	195	150	100
H	1	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

SAP Material Number	ISO 카탈로그 번호	등급

환영합니다

기본 설정을 확인해 주십시오

기본 설정 업데이트

제품 제안

Product Family suggestions

영업팀에 문의

영업팀에 문의

솔루션 수정

솔루션 추가

VSM490-15™ • XNGU-ALP • 알루미늄 및 기타 비철 합금용

Inserts • XNGU-ALP • For Aluminum and Other Non-Ferrous Alloys

공작물 재료

특징 및 장점

기계 측면

공작물 측면

인서트 선택 가이드

권장 초기 이송[mm]

Recommended Starting Feeds [IPT]

권장 시작 속도[m/min]*

Recommended Starting Speeds [SFM]*

제품 제안

Product Family suggestions

영업팀에 문의

알림

영업팀에 문의

Sending to SolidCAM in progress...

VSM490-15™ • XNGU-ALP • 알루미늄 및 기타 비철 합금용

Inserts • XNGU-ALP • For Aluminum and Other Non-Ferrous Alloys

공작물 재료

특징 및 장점

기계 측면

공작물 측면

인서트 선택 가이드

권장 초기 이송[mm]

Recommended Starting Feeds [IPT]

권장 시작 속도[m/min]*

Recommended Starting Speeds [SFM]*

The following files are available