TopGroove™ Grooving Inserts
필터
필터
필터 보기 위치
MetricInch
Workpiece Material
Workpiece Material
- P Steel (353)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(353)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(353)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(353)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(353)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(353)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(353)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(353)
- M Stainless Steel (365)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(365)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(365)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(365)
- K Cast Iron (364)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(364)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(364)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(364)
- N Non-Ferrous Materials (365)
- N1Wrought Aluminum (365)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(365)
- N3High-Silicon Aluminum Alloys Si >12.2%(365)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (11)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (365)
- N6Carbon, Graphite Composites, CFRP (365)
- N7MMC's (11)
- S High-Temp Alloys (365)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(365)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(365)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(365)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(365)
- H Hardened Materials (1)
- H1Hardened Materials 44-48 HRC(1)
- H2Hardened Materials 48-55 HRC(1)
Select All Star
- DE (10)
- US (153)
Applications
Applications
Boring (3)
Face Grooving (359)
Grooving (352)
ID Grooving (264)
Plunge Turning (264)
Profiling (82)
Turning (3)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (348)
- Lightly Interrupted Cut (348)
- Smooth Cut (359)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (67)
- 2.0 (298)
받는 사람
Corner Radius
Corner Radius
- 0.004 in(29)
- 0.007 in(11)
- 0.008 in(173)
- 0.01 in(5)
- 0.013 in(13)
- 0.02 in(4)
- 0.023 in(37)
- 0.03 in(4)
- 0.031 in(16)
- 0.039 in(7)
- 0.047 in(10)
- 0.049 in(3)
- 0.059 in(6)
- 0.062 in(4)
- 0.063 in(13)
- 0.069 in(4)
- 0.078 in(3)
- 0.079 in(4)
- 0.089 in(2)
- 0.094 in(5)
- 0.098 in(2)
- 0.125 in(6)
받는 사람
Corner Radius
Corner Radius
- 0.1 mm(29)
- 0.175 mm(11)
- 0.2 mm(173)
- 0.25 mm(5)
- 0.325 mm(13)
- 0.5 mm(4)
- 0.575 mm(37)
- 0.75 mm(4)
- 0.775 mm(16)
- 1.0 mm(7)
- 1.2 mm(10)
- 1.25 mm(3)
- 1.5 mm(6)
- 1.575 mm(4)
- 1.6 mm(13)
- 1.75 mm(4)
- 1.975 mm(3)
- 2.0 mm(4)
- 2.25 mm(2)
- 2.4 mm(5)
- 2.5 mm(2)
- 3.175 mm(6)
받는 사람
application
Grade Of Cutting Tool
Grade Of Cutting Tool
- THM (11)
- TN6010 (124)
- TN6025 (227)
- WU10HT (1)
- WU10PT (1)
- WU25PT (1)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.0 mm(9)
- 41.3 mm(6)
- 47.6 mm(4)
- 56.625 mm(3)
- 57.2 mm(2)
- 88.9 mm(115)
- 139.7 mm(142)
- 174.6 mm(34)
- 209.6 mm(33)
- 222.3 mm(16)
받는 사람
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.0 in(9)
- 1.626 in(6)
- 1.874 in(4)
- 2.229 in(3)
- 2.252 in(2)
- 3.5 in(115)
- 5.5 in(142)
- 6.874 in(34)
- 8.252 in(33)
- 8.752 in(16)
받는 사람
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 393.661 in(364)
받는 사람
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 9999.0 mm(364)
받는 사람
frontEnd
Cutting Width
Cutting Width
- 0.0197 in(3)
- 0.031 in(7)
- 0.0315 in(4)
- 0.0394 in(9)
- 0.041 in(1)
- 0.047 in(12)
- 0.0472 in(6)
- 0.0551 in(4)
- 0.058 in(2)
- 0.0591 in(13)
- 0.062 in(39)
- 0.0669 in(3)
- 0.0689 in(4)
- 0.072 in(2)
- 0.0768 in(4)
- 0.078 in(4)
- 0.0787 in(25)
- 0.0866 in(4)
- 0.088 in(2)
- 0.0886 in(4)
- 0.094 in(30)
- 0.0984 in(15)
- 0.1083 in(6)
- 0.1181 in(23)
- 0.125 in(44)
- 0.126 in(2)
- 0.1278 in(2)
- 0.128 in(1)
- 0.1378 in(9)
- 0.147 in(2)
- 0.151 in(2)
- 0.156 in(8)
- 0.1574 in(5)
- 0.1575 in(9)
- 0.1673 in(1)
- 0.1771 in(4)
- 0.1772 in(3)
- 0.188 in(5)
- 0.189 in(18)
- 0.192 in(2)
- 0.195 in(1)
- 0.196 in(2)
- 0.1969 in(4)
- 0.2165 in(1)
- 0.2362 in(1)
- 0.25 in(13)
받는 사람
Cutting Width
Cutting Width
- 0.5 mm(3)
- 0.787 mm(7)
- 0.8 mm(4)
- 1.0 mm(9)
- 1.041 mm(1)
- 1.19 mm(3)
- 1.194 mm(9)
- 1.2 mm(6)
- 1.4 mm(4)
- 1.473 mm(2)
- 1.5 mm(13)
- 1.57 mm(9)
- 1.575 mm(30)
- 1.7 mm(3)
- 1.75 mm(4)
- 1.829 mm(2)
- 1.95 mm(4)
- 1.981 mm(4)
- 2.0 mm(25)
- 2.2 mm(4)
- 2.236 mm(2)
- 2.25 mm(4)
- 2.387 mm(2)
- 2.388 mm(23)
- 2.39 mm(5)
- 2.5 mm(15)
- 2.75 mm(6)
- 3.0 mm(23)
- 3.17 mm(4)
- 3.175 mm(39)
- 3.18 mm(1)
- 3.2 mm(2)
- 3.245 mm(2)
- 3.25 mm(1)
- 3.5 mm(9)
- 3.73 mm(2)
- 3.84 mm(2)
- 3.96 mm(4)
- 3.962 mm(3)
- 3.974 mm(1)
- 4.0 mm(14)
- 4.25 mm(1)
- 4.5 mm(7)
- 4.775 mm(3)
- 4.788 mm(2)
- 4.8 mm(4)
- 4.801 mm(14)
- 4.88 mm(2)
- 4.953 mm(1)
- 4.978 mm(2)
- 5.0 mm(4)
- 5.5 mm(1)
- 6.0 mm(1)
- 6.35 mm(12)
- 6.36 mm(1)
받는 사람
Maximum Cutting Insert Depth
Maximum Cutting Insert Depth
- 0.64 mm(3)
- 0.76 mm(3)
- 0.762 mm(27)
- 1.015 mm(2)
- 1.016 mm(49)
- 1.02 mm(4)
- 1.09 mm(9)
- 1.092 mm(33)
- 1.335 mm(3)
- 1.905 mm(2)
- 1.97 mm(2)
- 1.981 mm(2)
- 2.54 mm(3)
- 2.75 mm(2)
- 2.92 mm(9)
- 2.921 mm(23)
- 3.81 mm(10)
- 3.84 mm(2)
- 3.86 mm(1)
받는 사람
Maximum Cutting Insert Depth
Maximum Cutting Insert Depth
- 0.025 in(3)
- 0.03 in(30)
- 0.04 in(55)
- 0.043 in(42)
- 0.0526 in(3)
- 0.075 in(2)
- 0.078 in(4)
- 0.1 in(3)
- 0.108 in(2)
- 0.115 in(32)
- 0.15 in(10)
- 0.151 in(2)
- 0.152 in(1)
받는 사람
insertGeometry
Insert Seat Size
Insert Seat Size
- 1 (3)
- 2 (119)
- 3 (192)
- 4 (51)
No filters matching ""
