BF IN
Ball Nose Inserts
Features and benefits
- -BF geometry is the first choice for all finishing and light operations.
Filters and Columns
Filters
Filters
View filters in
Metric
Inch
Material de la pieza de trabajo
Material de la pieza de trabajo
-
P Acero (7)
-
P0Aceros con bajo contenido de carbono, virutas largas C < 0,25 %; <125 HB; <530 N/mm^2 UTS (7)
-
P1Aceros con bajo contenido de carbono, virutas cortas C < 0,25 %; <125 HB; <530 N/mm^2 UTS (7)
-
P2Aceros al carbono medios y altos C < 0,25 %; <220 HB; <25 HRC; >530 N/mm^2 UTS (7)
-
P3Aceros aleados y aceros para herramientas C > 0,25 %; <330 HB; <35 HRC; entre 600 y 850 N/mm^2 UTS (2)
-
P4Aceros aleados y aceros para herramientas C > 0,25 %; entre 350 y 420 HB; entre 35 y 43 HRC; entre 850 y 1400 N/mm^2 UTS (2)
-
P5Aceros ferríticos, martensíticos e inoxidables PH <330 HB; <35 HRC; entre 600 y 900 N/mm^2 UTS (2)
-
P6Aceros ferríticos, martensíticos e inoxidables PH de alta resistencia Entre 350 y 450 HB; entre 35 y 43 HRC; entre 900 y 2400 N/mm^2 UTS (2)
-
-
M Acero inoxidable (2)
-
M1Acero inoxidable austenítico Entre 130 y 200 HB; <600 N/mm^2 UTS (2)
-
M2Aceros inoxidables fundidos e inoxidables austeníticos de alta resistencia Entre 150 y 230 HB; <25 HRC; <600 N/mm^2 UTS (2)
-
M3Acero inoxidable dúplex Entre 135 y 275 HB; <30 HRC; entre 500 y 1200 N/mm^2 UTS (2)
-
-
K Fundición (7)
-
K1Fundición gris Entre 120 y 290 HB; <32 HRC; entre 125 y 500 N/mm^2 UTS (7)
-
K2Fundiciones dúctiles y CGI de baja y media resistencia Entre 130 y 260 HB; <28 HRC; <600 N/mm^2 UTS (7)
-
K3Fundición austenítica y dúctil de alta resistencia Entre 180 y 350 HB; <43 HRC; >600 N/mm^2 UTS (7)
-
-
S Aleaciones de alta temperatura (1)
-
S1Aleaciones basadas en hierro, resistentes al calor Entre 160 y 260 HB; entre 25 y 48 HRC; entre 500 y 1200 N/mm^2 UTS (1)
-
S2Aleaciones basadas en cobalto, resistentes al calor Entre 250 y 450 HB; entre 25 y 48 HRC; entre 1000 y 1450 N/mm^2 UTS (1)
-
S3Aleaciones basadas en níquel, resistentes al calor Entre 160 y 450 HB; <48 HRC; entre 600 y 1700 N/mm^2 UTS (1)
-
S4Titanio y aleaciones de titanio Entre 300 y 450 HB; entre 33 y 43 HRC; entre 900 y 1600 N/mm^2 UTS (1)
-
-
H Materiales endurecidos (5)
-
H1Materiales endurecidos 44-48 HRC (5)
-
H2Materiales endurecidos 48-55 HRC (5)
-
H3Materiales endurecidos 56-60 HRC (5)
-
Radio de esquina
Radio de esquina
-
0.187 in (1)
-
0.25 in (1)
-
0.313 in (1)
-
0.375 in (2)
-
0.5 in (2)
to
Radio de esquina
Radio de esquina
-
4.75 mm (1)
-
6.351 mm (1)
-
7.95 mm (1)
-
9.525 mm (2)
-
12.701 mm (2)
to
application
Calidad de herramienta de corte
Calidad de herramienta de corte
-
TN2505 (5)
-
TN6525 (1)
-
TN6540 (1)
frontEnd
Ancho de corte
Ancho de corte
-
0.375 in (1)
-
0.5 in (1)
-
0.625 in (1)
-
0.75 in (2)
-
1.0 in (2)
to
Ancho de corte
Ancho de corte
-
9.525 mm (1)
-
12.701 mm (1)
-
15.875 mm (1)
-
19.05 mm (2)
-
25.401 mm (2)
to
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying
1-
7
of
7 results
Metric
Inch
Show
Metric
Inch
| Número de material SAP | Número de catálogo ISO | Número de catálogo ANSI | Calidad | Grosor de plaquita [S] | Grosor de plaquita [S] | Ancho de corte [W] | Ancho de corte [W] | Grosor medio de las virutas [HM] | Grosor medio de las virutas [HM] | Filos de corte por plaquita | Centro de radio de esquina [RC] | Centro de radio de esquina [RC] | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 2113573 | M270BF0375 | M270BF0375 | TN2505 | 2.38 | .0937 | 9.525 | .375 | 0.08 | .0031 | 2 | 4.762 | .1875 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$39.75
/each
Your price::
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 2113578 | M270BF0500 | M270BF0500 | TN2505 | 3.18 | .1252 | 12.7 | .5 | 0.08 | .0031 | 2 | 6.35 | .25 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$41.45
/each
Your price::
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 2113585 | M270BF0625 | M270BF0625 | TN2505 | 4.76 | .1874 | 15.875 | .625 | 0.08 | .0031 | 2 | 7.938 | .3125 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$47.34
/each
Your price::
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 2639024 | M270BF0750 | M270BF0750 | TN2505 | 4.76 | .1874 | 19.05 | .75 | 0.1 | .0039 | 2 | 9.525 | .375 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$56.34
/each
Your price::
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 4151098 | M270BF0750 | M270BF0750 | TN6525 | 4.76 | .1874 | 19.05 | .75 | 0.1 | .0039 | 2 | 9.525 | .375 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$57.46
/each
Your price::
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 2639026 | M270BF1000 | M270BF1000 | TN2505 | 4.76 | .1874 | 25.4 | 1 | 0.1 | .0039 | 2 | 12.7 | .5 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$70.36
/each
Your price::
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 4151101 | M270BF1000 | M270BF1000 | TN6540 | 4.76 | .1874 | 25.4 | 1 | 0.1 | .0039 | 2 | 12.7 | .5 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$71.76
/each
Your price::
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
List price:
Discount: %
Replacement
This item is no longer available
Replacement Product Please contact customer service for assistance
Replacement Product Please contact customer service for assistance
Qty
Sold in pkg. of
| Light
|
General
|
Heavy
|
||||
| Material
|
Geometry | Grade | Geometry | Grade | Geometry | Grade |
| P1–P2 | BF | TN2505 | BR | WP35CM | BR | WP35CM |
| P3–P4 | BF | TN2505 | BR | WP35CM | BR | WP35CM |
| P5–P6 | BF | TN2505 | BR | WP35CM | BR | WP35CM |
| M1–M2 | BR | WP35CM | BR | WP35CM | BR | WP35CM |
| M3 | BR | WP35CM | BR | WP35CM | BR | WP35CM |
| K1–K2 | BF | TN2505 | BF | WU10PM | BF | WU10PM |
| K3 | BF | TN2505 | BF | WU10PM | BF | WU10PM |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | – | – | – | – | – | – |
| S3 | – | – | – | – | – | – |
| S4 | – | – | – | – | – | – |
| H1 | BF | TN2505 | BF | TN2505 | BF | TN2505 |
| Light
|
General
|
Heavy
|
||||
| Material
|
Geometry | Grade | Geometry | Grade | Geometry | Grade |
| P1–P2 | BF | TN2505 | BR | WP35CM | BR | WP35CM |
| P3–P4 | BF | TN2505 | BR | WP35CM | BR | WP35CM |
| P5–P6 | BF | TN2505 | BR | WP35CM | BR | WP35CM |
| M1–M2 | BR | WP35CM | BR | WP35CM | BR | WP35CM |
| M3 | BR | WP35CM | BR | WP35CM | BR | WP35CM |
| K1–K2 | BF | TN2505 | BF | WU10PM | BF | WU10PM |
| K3 | BF | TN2505 | BF | WU10PM | BF | WU10PM |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | – | – | – | – | – | – |
| S3 | – | – | – | – | – | – |
| S4 | – | – | – | – | – | – |
| H1 | BF | TN2505 | BF | TN2505 | BF | TN2505 |
| Light
|
General
|
Heavy
|
||||
| Material
|
Geometry | Grade | Geometry | Grade | Geometry | Grade |
| P1–P2 | BF | TN6525 | BR | TN6540 | BR | WP35CM |
| P3–P4 | BF | TN6525 | BR | TN6540 | BR | WP35CM |
| P5–P6 | BF | TN6525 | BR | TN6540 | BR | WP35CM |
| M1–M2 | BF | TN6525 | BF | TN6525 | BR | WP35CM |
| M3 | BF | TN6525 | BF | TN6525 | BR | WP35CM |
| K1–K2 | BF | TN2505 | BF | WU10PM | BF | WU10PM |
| K3 | BF | TN2505 | BF | WU10PM | BF | WU10PM |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | – | – | – | – | – | – |
| S3 | – | – | – | – | – | – |
| S4 | BF | TN2505 | – | – | – | – |
| H1 | BF | TN2505 | BF | TN2505 | BF | TN2505 |
| Light
|
General
|
Heavy
|
||||
| Material
|
Geometry | Grade | Geometry | Grade | Geometry | Grade |
| P1–P2 | BR | TN6540 | BF | TN6540 | BF | TN6540 |
| P3–P4 | BR | TN6540 | BF | TN6540 | BR | WP35CM |
| P5–P6 | BR | TN6540 | BR | WP35CM | BR | WP35CM |
| M1–M2 | BR | TN6540 | BR | TN6540 | BR | TN6540 |
| M3 | BR | TN6540 | BR | TN6540 | BR | TN6540 |
| K1–K2 | BR | TN2505 | BR | TN2505 | – | – |
| K3 | BR | TN2505 | BR | TN2505 | – | – |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | – | – | BR | TN6540 | – | – |
| S3 | – | – | BR | TN6540 | – | – |
| S4 | – | – | BR | TN6540 | – | – |
| H1 | – | – | BR | TN2505 | – | – |
| Light
|
General
|
Heavy
|
||||
| Material
|
Geometry | Grade | Geometry | Grade | Geometry | Grade |
| P1–P2 | BR | WP35CM | BR | WP35CM | BR | WP35CM |
| P3–P4 | BR | WP35CM | BR | WP35CM | BR | WP35CM |
| P5–P6 | BR | WP35CM | BR | WP35CM | BR | WP35CM |
| M1–M2 | BR | WP35CM | BR | WP35CM | BR | WP35CM |
| M3 | BR | WP35CM | BR | WP35CM | BR | WP35CM |
| K1–K2 | BF | TN2505 | BF | TN2505 | BF | TN2505 |
| K3 | BF | TN2505 | BF | TN2505 | BF | TN2505 |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | BR | WP35CM | – | – | – | – |
| S3 | BR | WP35CM | – | – | – | – |
| S4 | BF | TN2505 | BR | WP35CM | – | – |
| H1 | BF | TN2505 | BR | WP35CM | BR | WP35CM |
| Light
|
General
|
Heavy
|
||||
| Material
|
Geometry | Grade | Geometry | Grade | Geometry | Grade |
| P1–P2 | BR | WP35CM | BR | WP35CM | BR | WP35CM |
| P3–P4 | BR | WP35CM | BR | WP35CM | BR | WP35CM |
| P5–P6 | BR | WP35CM | BR | WP35CM | BR | WP35CM |
| M1–M2 | BR | WP35CM | BR | WP35CM | BR | WP35CM |
| M3 | BR | WP35CM | BR | WP35CM | BR | WP35CM |
| K1–K2 | BF | TN2505 | BF | TN2505 | BF | TN2505 |
| K3 | BF | TN2505 | BF | TN2505 | BF | TN2505 |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | BR | WP35CM | – | – | – | – |
| S3 | BR | WP35CM | – | – | – | – |
| S4 | BR | WP35CM | BR | WP35CM | – | – |
| H1 | BF | TN2505 | BF | TN2505 | BF | TN2505 |
| Light
|
General
|
Heavy
|
||||
| Material
|
Geometry | Grade | Geometry | Grade | Geometry | Grade |
| P1–P2 | BF | TN2505 | BR | TN7535 | BR | TN7535 |
| P3–P4 | BF | TN2505 | BR | TN7535 | BR | TN7535 |
| P5–P6 | BF | TN2505 | BR | TN7535 | BR | TN7535 |
| M1–M2 | BR | TN7535 | BR | TN7535 | BR | TN7535 |
| M3 | BR | TN7535 | BR | TN7535 | BR | TN7535 |
| K1–K2 | BF | TN2505 | BR | TN7535 | BR | TN7535 |
| K3 | BF | TN2505 | BR | TN7535 | BR | TN7535 |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | – | – | – | – | – | – |
| S3 | – | – | – | – | – | – |
| S4 | – | – | – | – | – | – |
| H1 | BF | TN2505 | BF | TN2505 | – | – |
| Light
|
General
|
Heavy
|
||||
| Material
|
Geometry | Grade | Geometry | Grade | Geometry | Grade |
| P1–P2 | BF | TN2505 | BR | TN7535 | BR | TN7535 |
| P3–P4 | BF | TN2505 | BR | TN7535 | BR | TN7535 |
| P5–P6 | BF | TN2505 | BR | TN7535 | BR | TN7535 |
| M1–M2 | BR | TN7535 | BR | TN7535 | BR | TN7535 |
| M3 | BR | TN7535 | BR | TN7535 | BR | TN7535 |
| K1–K2 | BF | TN2505 | BR | TN2510 | BR | TN7535 |
| K3 | BF | TN2505 | BR | TN2510 | BR | TN7535 |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | – | – | – | – | – | – |
| S3 | – | – | – | – | – | – |
| S4 | – | – | – | – | – | – |
| H1 | BF | TN2505 | BF | TN2505 | BR | TN2510 |
| Light
|
General
|
Heavy
|
||||
| Material
|
Geometry | Grade | Geometry | Grade | Geometry | Grade |
| P1–P2 | BF | TN6525 | BR | TN7535 | BR | TN7535 |
| P3–P4 | BF | TN6525 | BR | TN7535 | BR | TN7535 |
| P5–P6 | BF | TN6525 | BR | TN7535 | BR | TN7535 |
| M1–M2 | BF | TN6525 | BF | TN6525 | BR | TN7535 |
| M3 | BF | TN6525 | BF | TN6525 | BR | TN7535 |
| K1–K2 | BF | TN2505 | BR | TN7535 | BR | TN7535 |
| K3 | BF | TN2505 | BR | TN7535 | BR | TN7535 |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | – | – | – | – | – | – |
| S3 | – | – | – | – | – | – |
| S4 | BF | TN2505 | – | – | – | – |
| H1 | BF | TN2505 | BF | TN2505 | BR | TN2510 |
| Light
|
General
|
Heavy
|
||||
| Material
|
Geometry | Grade | Geometry | Grade | Geometry | Grade |
| P1–P2 | BF | TN6540 | BF | TN6540 | BF | TN6540 |
| P3–P4 | BF | TN6540 | BF | TN6540 | BF | TN7535 |
| P5–P6 | BF | TN6540 | BF | TN7535 | BF | TN7535 |
| M1–M2 | BF | TN6540 | BF | TN6540 | BF | TN7535 |
| M3 | BF | TN6540 | BF | TN6540 | BF | TN7535 |
| K1–K2 | BR | TN2505 | BR | TN2505 | – | – |
| K3 | BR | TN2505 | BR | TN2505 | – | – |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | – | – | BF | TN6540 | – | – |
| S3 | – | – | BF | TN6540 | – | – |
| S4 | – | – | BF | TN6540 | – | – |
| H1 | – | – | BR | TN2505 | – | – |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40
|
||||||||||||
| BF | 0,12 | 0,23 | 0,42 | 0,08 | 0,16 | 0,29 | 0,06 | 0,12 | 0,21 | 0,05 | 0,10 | 0,18 | 0,05 | 0,10 | 0,17 | BF |
| BR | 0,19 | 0,29 | 0,51 | 0,14 | 0,20 | 0,35 | 0,10 | 0,15 | 0,25 | 0,09 | 0,13 | 0,22 | 0,08 | 0,12 | 0,20 | BR |
| Light
|
General
|
Heavy
|
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40
|
||||||||||||
| BF | 0,14 | 0,27 | 0,49 | 0,10 | 0,19 | 0,34 | 0,07 | 0,14 | 0,25 | 0,06 | 0,12 | 0,21 | 0,06 | 0,11 | 0,19 | BF |
| BR | 0,22 | 0,34 | 0,61 | 0,16 | 0,24 | 0,40 | 0,12 | 0,17 | 0,29 | 0,10 | 0,15 | 0,25 | 0,09 | 0,14 | 0,23 | BR |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40
|
||||||||||||
| BF | 0,25 | 0,51 | 1,02 | 0,18 | 0,34 | 0,63 | 0,13 | 0,25 | 0,44 | 0,11 | 0,22 | 0,38 | 0,10 | 0,20 | 0,35 | BF |
| BR | 0,41 | 0,66 | 1,34 | 0,28 | 0,44 | 0,76 | 0,21 | 0,31 | 0,53 | 0,18 | 0,27 | 0,45 | 0,17 | 0,25 | 0,41 | BR |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40
|
||||||||||||
| BF | 0,18 | 0,36 | 0,68 | 0,13 | 0,25 | 0,45 | 0,09 | 0,18 | 0,32 | 0,08 | 0,16 | 0,28 | 0,08 | 0,15 | 0,25 | BF |
| BR | 0,29 | 0,46 | 0,84 | 0,21 | 0,31 | 0,54 | 0,15 | 0,23 | 0,39 | 0,13 | 0,20 | 0,33 | 0,12 | 0,18 | 0,30 | BR |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40
|
||||||||||||
| BR | 0,15 | 0,33 | 0,50 | 0,11 | 0,24 | 0,35 | 0,08 | 0,17 | 0,26 | 0,07 | 0,15 | 0,22 | 0,06 | 0,14 | 0,20 | BR |
| BF | 0,24 | 0,46 | 0,69 | 0,17 | 0,32 | 0,47 | 0,13 | 0,23 | 0,34 | 0,11 | 0,20 | 0,29 | 0,10 | 0,18 | 0,27 | BF |
| Light
|
General
|
Heavy
|
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40
|
||||||||||||
| BR | 0,13 | 0,29 | 0,43 | 0,09 | 0,20 | 0,30 | 0,07 | 0,15 | 0,22 | 0,06 | 0,13 | 0,19 | 0,06 | 0,12 | 0,18 | BR |
| BF | 0,21 | 0,39 | 0,58 | 0,15 | 0,27 | 0,40 | 0,11 | 0,20 | 0,29 | 0,10 | 0,18 | 0,25 | 0,09 | 0,16 | 0,23 | BF |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40
|
||||||||||||
| BR | 0,28 | 0,63 | 0,99 | 0,20 | 0,43 | 0,64 | 0,15 | 0,31 | 0,46 | 0,13 | 0,27 | 0,40 | 0,12 | 0,25 | 0,36 | BR |
| BF | 0,45 | 0,89 | 1,42 | 0,31 | 0,58 | 0,87 | 0,23 | 0,42 | 0,61 | 0,20 | 0,36 | 0,53 | 0,18 | 0,33 | 0,48 | BF |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40
|
||||||||||||
| BR | 0,20 | 0,45 | 0,68 | 0,14 | 0,31 | 0,46 | 0,11 | 0,23 | 0,34 | 0,09 | 0,20 | 0,29 | 0,08 | 0,18 | 0,27 | BR |
| BF | 0,32 | 0,61 | 0,94 | 0,23 | 0,42 | 0,62 | 0,17 | 0,31 | 0,45 | 0,15 | 0,26 | 0,38 | 0,13 | 0,24 | 0,35 | BF |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40
|
||||||||||||
| BF | 0,14 | 0,28 | 0,45 | 0,10 | 0,20 | 0,31 | 0,08 | 0,15 | 0,23 | 0,07 | 0,13 | 0,20 | 0,06 | 0,12 | 0,18 | BF |
| BR | 0,21 | 0,38 | 0,59 | 0,15 | 0,27 | 0,41 | 0,11 | 0,20 | 0,30 | 0,10 | 0,17 | 0,26 | 0,09 | 0,16 | 0,24 | BR |
| Light
|
General
|
Heavy
|
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40
|
||||||||||||
| BF | 0,16 | 0,33 | 0,52 | 0,12 | 0,23 | 0,36 | 0,09 | 0,17 | 0,27 | 0,08 | 0,15 | 0,23 | 0,07 | 0,14 | 0,21 | BF |
| BR | 0,24 | 0,45 | 0,69 | 0,17 | 0,31 | 0,48 | 0,13 | 0,23 | 0,35 | 0,11 | 0,20 | 0,30 | 0,10 | 0,18 | 0,28 | BR |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40
|
||||||||||||
| BF | 0,21 | 0,44 | 0,70 | 0,15 | 0,31 | 0,48 | 0,11 | 0,23 | 0,35 | 0,10 | 0,20 | 0,30 | 0,09 | 0,18 | 0,28 | BF |
| BR | 0,32 | 0,60 | 0,94 | 0,23 | 0,42 | 0,63 | 0,17 | 0,31 | 0,46 | 0,15 | 0,26 | 0,40 | 0,13 | 0,24 | 0,36 | BR |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40
|
||||||||||||
| BF | 0,29 | 0,61 | 0,99 | 0,21 | 0,43 | 0,66 | 0,16 | 0,31 | 0,48 | 0,14 | 0,27 | 0,42 | 0,12 | 0,25 | 0,38 | BF |
| BR | 0,44 | 0,85 | 1,38 | 0,31 | 0,57 | 0,88 | 0,23 | 0,42 | 0,63 | 0,20 | 0,36 | 0,54 | 0,18 | 0,33 | 0,50 | BR |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40
|
||||||||||||
| BF | 0,19 | 0,24 | 0,40 | 0,13 | 0,17 | 0,28 | 0,10 | 0,13 | 0,21 | 0,09 | 0,11 | 0,18 | 0,08 | 0,10 | 0,17 | BF |
| BR | 0,24 | 0,38 | 0,65 | 0,17 | 0,27 | 0,46 | 0,13 | 0,20 | 0,34 | 0,11 | 0,17 | 0,30 | 0,10 | 0,16 | 0,27 | BR |
| Light
|
General
|
Heavy
|
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40
|
||||||||||||
| BF | 0,22 | 0,28 | 0,46 | 0,15 | 0,20 | 0,33 | 0,12 | 0,15 | 0,24 | 0,10 | 0,13 | 0,21 | 0,09 | 0,12 | 0,19 | BF |
| BR | 0,27 | 0,44 | 0,76 | 0,20 | 0,31 | 0,53 | 0,15 | 0,23 | 0,39 | 0,13 | 0,20 | 0,34 | 0,12 | 0,18 | 0,31 | BR |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40
|
||||||||||||
| BF | 0,39 | 0,51 | 0,85 | 0,28 | 0,36 | 0,59 | 0,21 | 0,27 | 0,44 | 0,18 | 0,23 | 0,38 | 0,17 | 0,21 | 0,35 | BF |
| BR | 0,50 | 0,81 | 1,44 | 0,36 | 0,56 | 0,97 | 0,26 | 0,42 | 0,71 | 0,23 | 0,36 | 0,61 | 0,21 | 0,33 | 0,56 | BR |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40
|
||||||||||||
| BF | 0,28 | 0,37 | 0,61 | 0,20 | 0,27 | 0,43 | 0,15 | 0,20 | 0,32 | 0,13 | 0,17 | 0,28 | 0,12 | 0,16 | 0,25 | BF |
| BR | 0,36 | 0,58 | 1,01 | 0,26 | 0,41 | 0,70 | 0,19 | 0,30 | 0,52 | 0,17 | 0,26 | 0,45 | 0,15 | 0,24 | 0,41 | BR |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40
|
||||||||||||
| BF | 0,17 | 0,31 | 0,50 | 0,13 | 0,22 | 0,36 | 0,09 | 0,16 | 0,26 | 0,08 | 0,14 | 0,23 | 0,08 | 0,13 | 0,21 | BF |
| BR | 0,24 | 0,38 | 0,65 | 0,17 | 0,27 | 0,46 | 0,13 | 0,20 | 0,34 | 0,11 | 0,17 | 0,30 | 0,10 | 0,16 | 0,27 | BR |
| Light
|
General
|
Heavy
|
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40
|
||||||||||||
| BF | 0,20 | 0,35 | 0,58 | 0,15 | 0,25 | 0,41 | 0,11 | 0,19 | 0,30 | 0,09 | 0,16 | 0,27 | 0,09 | 0,15 | 0,24 | BF |
| BR | 0,27 | 0,44 | 0,76 | 0,20 | 0,31 | 0,53 | 0,15 | 0,23 | 0,39 | 0,13 | 0,20 | 0,34 | 0,12 | 0,18 | 0,31 | BR |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40
|
||||||||||||
| BF | 0,37 | 0,65 | 1,09 | 0,26 | 0,46 | 0,75 | 0,19 | 0,34 | 0,55 | 0,17 | 0,29 | 0,47 | 0,15 | 0,27 | 0,43 | BF |
| BR | 0,50 | 0,81 | 1,44 | 0,36 | 0,56 | 0,97 | 0,26 | 0,42 | 0,71 | 0,23 | 0,36 | 0,61 | 0,21 | 0,33 | 0,56 | BR |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40
|
||||||||||||
| BF | 0,27 | 0,47 | 0,77 | 0,19 | 0,33 | 0,54 | 0,14 | 0,25 | 0,40 | 0,12 | 0,21 | 0,35 | 0,11 | 0,20 | 0,32 | BF |
| BR | 0,36 | 0,58 | 1,02 | 0,26 | 0,41 | 0,70 | 0,19 | 0,30 | 0,52 | 0,17 | 0,26 | 0,45 | 0,15 | 0,24 | 0,41 | BR |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40
|
||||||||||||
| BF | .005 | .009 | .016 | .003 | .006 | .011 | .002 | .005 | .008 | .002 | .004 | .007 | .002 | .004 | .007 | BF |
| BR | .007 | .011 | .020 | .005 | .008 | .013 | .004 | .006 | .010 | .003 | .005 | .008 | .003 | .005 | .008 | BR |
| Light
|
General
|
Heavy
|
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40
|
||||||||||||
| BF | .005 | .010 | .019 | .004 | .007 | .013 | .003 | .005 | .010 | .002 | .005 | .008 | .002 | .004 | .008 | BF |
| BR | .009 | .013 | .023 | .006 | .009 | .016 | .004 | .007 | .011 | .004 | .006 | .010 | .004 | .005 | .009 | BR |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40
|
||||||||||||
| BF | .010 | .020 | .039 | .007 | .013 | .024 | .005 | .010 | .017 | .004 | .008 | .015 | .004 | .008 | .013 | BF |
| BR | .016 | .025 | .051 | .011 | .017 | .029 | .008 | .012 | .021 | .007 | .011 | .018 | .006 | .010 | .016 | BR |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40
|
||||||||||||
| BF | .007 | .014 | .026 | .005 | .010 | .017 | .004 | .007 | .013 | .003 | .006 | .011 | .003 | .006 | .010 | BF |
| BR | .011 | .018 | .033 | .008 | .012 | .021 | .006 | .009 | .015 | .005 | .008 | .013 | .005 | .007 | .012 | BR |
| Light
|
General
|
Heavy
|
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40
|
||||||||||||
| BF | .005 | .011 | .017 | .004 | .008 | .012 | .003 | .006 | .009 | .002 | .005 | .007 | .002 | .005 | .007 | BF |
| BR | .008 | .015 | .023 | .006 | .011 | .016 | .004 | .008 | .011 | .004 | .007 | .010 | .003 | .006 | .009 | BR |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40
|
||||||||||||
| BF | .006 | .013 | .020 | .004 | .009 | .014 | .003 | .007 | .010 | .003 | .006 | .009 | .003 | .005 | .008 | BF |
| BR | .009 | .018 | .027 | .007 | .012 | .018 | .005 | .009 | .013 | .004 | .008 | .011 | .004 | .007 | .010 | BR |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40
|
||||||||||||
| BF | .008 | .017 | .026 | .006 | .012 | .018 | .004 | .009 | .013 | .004 | .008 | .011 | .003 | .007 | .010 | BF |
| BR | .012 | .024 | .036 | .009 | .016 | .024 | .006 | .012 | .017 | .006 | .010 | .015 | .005 | .009 | .014 | BR |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40
|
||||||||||||
| BF | .011 | .024 | .038 | .008 | .017 | .025 | .006 | .012 | .018 | .005 | .011 | .015 | .004 | .010 | .014 | BF |
| BR | .017 | .034 | .055 | .012 | .022 | .034 | .009 | .016 | .024 | .008 | .014 | .020 | .007 | .013 | .019 | BR |
| Light
|
General
|
Heavy
|
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40
|
||||||||||||
| BF | .005 | .011 | .017 | .004 | .008 | .012 | .003 | .006 | .009 | .003 | .005 | .008 | .002 | .005 | .007 | BF |
| BR | .008 | .015 | .023 | .006 | .011 | .016 | .004 | .008 | .012 | .004 | .007 | .010 | .003 | .006 | .009 | BR |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40
|
||||||||||||
| BF | .006 | .013 | .020 | .005 | .009 | .014 | .003 | .007 | .010 | .003 | .006 | .009 | .003 | .005 | .008 | BF |
| BR | .009 | .017 | .027 | .007 | .012 | .018 | .005 | .009 | .014 | .004 | .008 | .012 | .004 | .007 | .011 | BR |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40
|
||||||||||||
| BF | .011 | .024 | .038 | .008 | .016 | .026 | .006 | .012 | .019 | .005 | .011 | .016 | .005 | .010 | .015 | BF |
| BR | .017 | .033 | .053 | .012 | .022 | .034 | .009 | .016 | .024 | .008 | .014 | .021 | .007 | .013 | .019 | BR |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40
|
||||||||||||
| BF | .008 | .017 | .027 | .006 | .012 | .019 | .004 | .009 | .014 | .004 | .008 | .012 | .004 | .007 | .011 | BF |
| BR | .012 | .023 | .036 | .009 | .016 | .024 | .006 | .012 | .018 | .006 | .010 | .015 | .005 | .009 | .014 | BR |
| Light
|
General
|
Heavy
|
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40
|
||||||||||||
| BR | .005 | .011 | .017 | .004 | .008 | .012 | .003 | .006 | .009 | .003 | .005 | .008 | .002 | .005 | .007 | BR |
| BF | .007 | .014 | .022 | .005 | .010 | .015 | .004 | .007 | .011 | .003 | .006 | .010 | .003 | .006 | .009 | BF |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40
|
||||||||||||
| BR | .006 | .013 | .020 | .005 | .009 | .014 | .003 | .007 | .010 | .003 | .006 | .009 | .003 | .005 | .008 | BR |
| BF | .008 | .016 | .025 | .006 | .011 | .018 | .005 | .008 | .013 | .004 | .007 | .011 | .004 | .007 | .010 | BF |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40
|
||||||||||||
| BR | .011 | .023 | .037 | .008 | .016 | .026 | .006 | .012 | .019 | .005 | .011 | .016 | .005 | .010 | .015 | BR |
| BF | .015 | .030 | .049 | .011 | .021 | .032 | .008 | .015 | .024 | .007 | .013 | .020 | .006 | .012 | .019 | BF |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40
|
||||||||||||
| BR | .008 | .017 | .027 | .006 | .012 | .018 | .004 | .009 | .014 | .004 | .008 | .012 | .004 | .007 | .011 | BR |
| BF | .011 | .021 | .034 | .008 | .015 | .023 | .006 | .011 | .017 | .005 | .010 | .015 | .005 | .009 | .014 | BF |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40
|
||||||||||||
| BF | .007 | .009 | .015 | .005 | .007 | .011 | .004 | .005 | .008 | .003 | .004 | .007 | .003 | .004 | .007 | BF |
| BR | .009 | .015 | .025 | .007 | .011 | .018 | .005 | .008 | .013 | .004 | .007 | .012 | .004 | .006 | .011 | BR |
| Light
|
General
|
Heavy
|
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40
|
||||||||||||
| BF | .008 | .011 | .018 | .006 | .008 | .013 | .004 | .006 | .009 | .004 | .005 | .008 | .004 | .005 | .008 | BF |
| BR | .011 | .017 | .030 | .008 | .012 | .021 | .006 | .009 | .015 | .005 | .008 | .013 | .005 | .007 | .012 | BR |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40
|
||||||||||||
| BF | .015 | .020 | .033 | .011 | .014 | .023 | .008 | .010 | .017 | .007 | .009 | .015 | .006 | .008 | .013 | BF |
| BR | .020 | .031 | .056 | .014 | .022 | .038 | .010 | .016 | .028 | .009 | .014 | .024 | .008 | .013 | .022 | BR |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40
|
||||||||||||
| BF | .011 | .014 | .024 | .008 | .010 | .017 | .006 | .008 | .012 | .005 | .007 | .011 | .005 | .006 | .010 | BF |
| BR | .014 | .023 | .040 | .010 | .016 | .027 | .008 | .012 | .020 | .007 | .010 | .017 | .006 | .009 | .016 | BR |
Velocidades iniciales recomendadas [m/min]
| Material Group | TN2505 | TN6525 | TN6540 | WP35CM | WU10PM | |||||||||||
| P | 1 | 550 | 420 | 360 | 410 | 320 | 280 | 360 | 280 | 240 | 455 | 395 | 370 | – | – | – |
| 2 | 320 | 240 | 205 | 320 | 250 | 215 | 250 | 190 | 170 | 280 | 255 | 230 | – | – | – | |
| 3 | 320 | 240 | 205 | 280 | 215 | 185 | 215 | 170 | 140 | 255 | 230 | 205 | – | – | – | |
| 4 | – | – | – | 235 | 170 | 145 | 180 | 130 | 110 | 190 | 175 | 160 | – | – | – | |
| 5 | – | – | – | 310 | 235 | 200 | 240 | 180 | 150 | 260 | 230 | 210 | – | – | – | |
| 6 | – | – | – | 205 | 160 | 130 | 160 | 120 | 100 | 160 | 135 | 110 | – | – | – | |
| M | 1 | – | – | – | 190 | 120 | 80 | 130 | 80 | 60 | 205 | 185 | 155 | – | – | – |
| 2 | – | – | – | 120 | 80 | 50 | 80 | 50 | 40 | 185 | 160 | 140 | – | – | – | |
| 3 | – | – | – | 125 | 80 | 55 | 85 | 50 | 40 | 145 | 130 | 115 | – | – | – | |
| K | 1 | 400 | 300 | 250 | 275 | 245 | 220 | 220 | 205 | 180 | 295 | 265 | 240 | 295 | 265 | 240 |
| 2 | 540 | 365 | 280 | 215 | 190 | 180 | 175 | 155 | 140 | 235 | 210 | 190 | 230 | 205 | 190 | |
| 3 | 310 | 190 | 155 | 180 | 160 | 145 | 155 | 145 | 125 | 195 | 175 | 160 | 195 | 175 | 160 | |
| N | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | 50 | 35 | 30 | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | 25 | 20 | 10 | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | 70 | 40 | 30 | – | – | – | – | – | – | |
| 4 | – | – | – | – | – | – | 60 | 30 | 25 | 66 | 50 | 33 | – | – | – | |
| H | 1 | 175 | 140 | 95 | – | – | – | – | – | – | – | – | – | 160 | 130 | 90 |
| 2 | 175 | 140 | 95 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | 140 | 115 | 80 | – | – | – | – | – | – | – | – | – | – | – | – | |
Recommended Starting Speeds [SFM]
| Material Group | TN2505 | TN2510 | TN6525 | TN6540 | TN7525 | TN7535 | TTI25 | |||||||||||||||
| P | 1 | 1810 | 1380 | 1180 | 2165 | 1910 | 1770 | 1340 | 1045 | 925 | 1180 | 925 | 785 | 1340 | 1025 | 925 | 1790 | 1555 | 1460 | 1415 | 1180 | 985 |
| 2 | 1045 | 785 | 670 | 1340 | 1220 | 1080 | 1045 | 830 | 710 | 830 | 630 | 550 | 1025 | 830 | 710 | 1105 | 1000 | 905 | 1025 | 830 | 710 | |
| 3 | 1045 | 785 | 670 | 1220 | 1080 | 1000 | 925 | 710 | 610 | 710 | 550 | 450 | 925 | 710 | 610 | 1000 | 905 | 805 | 1025 | 830 | 710 | |
| 4 | – | – | – | 905 | 845 | 750 | 770 | 550 | 475 | 590 | 430 | 355 | 770 | 550 | 475 | 750 | 690 | 630 | 865 | 710 | 590 | |
| 5 | – | – | – | 1080 | 985 | 905 | 1025 | 770 | 650 | 785 | 590 | 490 | 1025 | 770 | 650 | 1025 | 905 | 830 | 1045 | 770 | 650 | |
| 6 | – | – | – | 750 | 670 | 570 | 670 | 535 | 430 | 535 | 395 | 335 | 670 | 535 | 430 | 630 | 535 | 430 | 475 | 355 | 295 | |
| M | 1 | – | – | – | 890 | 785 | 690 | 630 | 395 | 260 | 430 | 260 | 200 | 805 | 725 | 610 | 805 | 725 | 610 | 1570 | 1025 | 710 |
| 2 | – | – | – | 805 | 690 | 630 | 395 | 260 | 155 | 260 | 155 | 140 | 725 | 630 | 550 | 725 | 630 | 550 | 1060 | 670 | 475 | |
| 3 | – | – | – | 630 | 570 | 490 | 415 | 260 | 180 | 275 | 155 | 140 | 570 | 510 | 450 | 570 | 510 | 450 | 1045 | 690 | 475 | |
| K | 1 | 1320 | 985 | 830 | 1380 | 1180 | 985 | 905 | 805 | 725 | 725 | 670 | 590 | 1240 | 925 | 785 | 1165 | 1045 | 940 | 725 | 610 | 510 |
| 2 | 1770 | 1200 | 925 | 1180 | 985 | 830 | 710 | 630 | 590 | 570 | 510 | 450 | 1060 | 785 | 650 | 925 | 830 | 750 | 590 | 475 | 415 | |
| 3 | 1025 | 630 | 510 | 985 | 830 | 650 | 590 | 535 | 475 | 510 | 475 | 415 | 785 | 650 | 550 | 770 | 690 | 630 | 475 | 415 | 335 | |
| N | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | – | – | – | 155 | 120 | 95 | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | 80 | 60 | 40 | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | 235 | 140 | 95 | – | – | – | – | – | – | – | – | – | |
| 4 | – | – | – | – | – | – | – | – | – | 200 | 95 | 80 | – | – | – | – | – | – | – | – | – | |
| H | 1 | 570 | 450 | 310 | 475 | 360 | 230 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | 570 | 450 | 310 | 475 | 360 | 230 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | 450 | 370 | 260 | 380 | 260 | 150 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |