Solicitar Productos Online
successfully added to cart
View Cart
COVID-19: Como está respondiendo WIDIA

Sepa más

VICTORY Top Drill M1™

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (439)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (439)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (439)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (439)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (439)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (439)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (7)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (7)
  • M Stainless Steel (7)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (7)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (7)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (7)
  • K Cast Iron (439)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (439)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (439)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (7)
  • N Non-Ferrous Materials (1)
    • N1
      Wrought Aluminum
      (1)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (1)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (1)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (1)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (1)
    • N6
      Carbon, Graphite Composites, CFRP
      (1)
    • N7
      MMC's
      (1)
  • S High-Temp Alloys (7)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (7)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (7)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (7)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (7)
Select First Choice
  • CN (20)
  • DE (172)
  • IN (22)
  • US (91)
Applications
  • Convex Drilling Convex Drilling (7)
  • Corner Style SquareEnd Drilling Corner Style SquareEnd Drilling (7)
  • CornerStyle Chamfer Drilling CornerStyle Chamfer Drilling (7)
  • Counterboring Counterboring (7)
  • Countersinking Countersinking (7)
  • Drilling Drilling (231)
  • Flat Bottom Drilling Flat Bottom Drilling (7)
  • ID Thread Turning ID Thread Turning (208)
  • Inclined Entry Drilling Inclined Entry Drilling (7)
  • Inclined Exit Drilling Inclined Exit Drilling (231)
  • Pre-Condition Pre-Condition (231)
  • Stacked Plates Drilling Stacked Plates Drilling (231)
  • X-Offset Drilling X-Offset Drilling (7)
Cutting Diameter
  • 7.94 (10)
  • 8.0 (10)
  • 8.1 (10)
  • 8.16 (10)
  • 8.2 (10)
  • 8.3 (10)
  • 8.33 (10)
  • 8.4 (10)
  • 8.43 (10)
  • 8.5 (10)
  • 8.6 (10)
  • 8.61 (10)
  • 8.7 (10)
  • 8.73 (10)
  • 8.8 (10)
  • 8.84 (10)
  • 8.9 (10)
  • 9.0 (10)
  • 9.09 (10)
  • 9.1 (10)
  • 9.13 (10)
  • 9.2 (10)
  • 9.3 (10)
  • 9.35 (10)
  • 9.4 (10)
  • 9.5 (13)
  • 9.53 (13)
  • 9.56 (13)
  • 9.58 (13)
  • 9.6 (13)
  • 9.7 (13)
  • 9.8 (13)
  • 9.9 (13)
  • 9.92 (13)
  • 10.0 (10)
  • 10.02 (10)
  • 10.08 (10)
  • 10.1 (10)
  • 10.2 (10)
  • 10.26 (10)
  • 10.3 (10)
  • 10.32 (10)
  • 10.4 (10)
  • 10.49 (10)
  • 10.5 (10)
  • 10.6 (10)
  • 10.7 (10)
  • 10.72 (10)
  • 10.8 (10)
  • 10.9 (10)
  • 11.0 (10)
  • 11.1 (10)
  • 11.11 (10)
  • 11.2 (10)
  • 11.3 (10)
  • 11.4 (10)
  • 11.5 (10)
  • 11.51 (10)
  • 11.6 (10)
  • 11.61 (10)
  • 11.7 (10)
  • 11.8 (10)
  • 11.9 (10)
  • 11.91 (10)
  • 12.0 (10)
  • 12.1 (10)
  • 12.2 (10)
  • 12.3 (10)
  • 12.4 (10)
  • 12.47 (10)
  • 12.5 (13)
  • 12.6 (13)
  • 12.7 (13)
  • 12.8 (13)
  • 12.9 (13)
  • 13.0 (10)
  • 13.1 (10)
  • 13.2 (10)
  • 13.3 (10)
  • 13.4 (10)
  • 13.49 (10)
  • 13.5 (10)
  • 13.6 (10)
  • 13.7 (10)
  • 13.8 (10)
  • 13.89 (10)
  • 13.9 (10)
  • 14.0 (10)
  • 14.1 (10)
  • 14.2 (10)
  • 14.29 (10)
  • 14.3 (10)
  • 14.4 (10)
  • 14.5 (10)
  • 14.6 (10)
  • 14.67 (10)
  • 14.68 (10)
  • 14.7 (10)
  • 14.8 (10)
  • 14.9 (10)
  • 15.0 (10)
  • 15.08 (9)
  • 15.1 (9)
  • 15.2 (9)
  • 15.3 (9)
  • 15.4 (9)
  • 15.48 (9)
  • 15.5 (9)
  • 15.6 (9)
  • 15.7 (9)
  • 15.8 (9)
  • 15.88 (9)
  • 16.0 (10)
  • 16.03 (10)
  • 16.08 (10)
  • 16.1 (10)
  • 16.18 (10)
  • 16.2 (10)
  • 16.27 (10)
  • 16.3 (10)
  • 16.4 (10)
  • 16.5 (10)
  • 16.6 (10)
  • 16.67 (10)
  • 16.7 (10)
  • 16.8 (10)
  • 16.87 (10)
  • 16.9 (10)
  • 17.0 (10)
  • 17.07 (10)
  • 17.1 (10)
  • 17.2 (10)
  • 17.3 (10)
  • 17.4 (10)
  • 17.46 (10)
  • 17.5 (10)
  • 17.6 (10)
  • 17.7 (10)
  • 17.8 (10)
  • 17.86 (10)
  • 17.9 (10)
  • 18.0 (10)
  • 18.1 (10)
  • 18.2 (10)
  • 18.26 (10)
  • 18.3 (10)
  • 18.4 (10)
  • 18.5 (10)
  • 18.6 (10)
  • 18.65 (10)
  • 18.7 (10)
  • 18.8 (10)
  • 18.9 (10)
  • 19.0 (10)
  • 19.05 (10)
  • 19.1 (10)
  • 19.2 (10)
  • 19.23 (10)
  • 19.25 (10)
  • 19.28 (10)
  • 19.3 (10)
  • 19.35 (10)
  • 19.4 (10)
  • 19.45 (10)
  • 19.5 (10)
  • 19.6 (10)
  • 19.7 (10)
  • 19.8 (10)
  • 19.84 (10)
  • 19.9 (10)
  • 20.0 (10)
  • 20.1 (10)
  • 20.2 (10)
  • 20.24 (10)
  • 20.3 (10)
  • 20.4 (10)
  • 20.5 (10)
  • 20.6 (10)
  • 20.64 (10)
  • 20.7 (10)
  • 20.8 (10)
  • 20.9 (10)
  • 20.99 (10)
  • 21.0 (10)
  • 21.438 (10)
  • 21.5 (10)
  • 22.0 (10)
  • 22.225 (10)
  • 22.454 (10)
  • 22.5 (10)
  • 23.0 (10)
  • 23.5 (10)
  • 23.812 (10)
  • 24.0 (10)
  • 24.5 (10)
  • 24.613 (10)
  • 25.0 (10)
  • 25.4 (10)
  • 25.5 (10)
  • 25.679 (10)
  • 25.806 (10)
  • 25.99 (10)
to
Cutting Diameter
  • 0.3125 (10)
  • 0.315 (10)
  • 0.3189 (10)
  • 0.3214 (10)
  • 0.323 (10)
  • 0.3268 (10)
  • 0.3281 (10)
  • 0.3307 (10)
  • 0.332 (10)
  • 0.3347 (10)
  • 0.3386 (10)
  • 0.339 (10)
  • 0.3425 (10)
  • 0.3438 (10)
  • 0.3465 (10)
  • 0.348 (10)
  • 0.3504 (10)
  • 0.3544 (10)
  • 0.358 (10)
  • 0.3583 (10)
  • 0.3594 (10)
  • 0.3622 (10)
  • 0.3661 (10)
  • 0.368 (10)
  • 0.3701 (10)
  • 0.3741 (13)
  • 0.375 (13)
  • 0.3763 (13)
  • 0.377 (13)
  • 0.378 (13)
  • 0.382 (13)
  • 0.386 (13)
  • 0.3898 (13)
  • 0.3906 (13)
  • 0.3938 (10)
  • 0.3946 (10)
  • 0.397 (10)
  • 0.3976 (10)
  • 0.4016 (10)
  • 0.404 (10)
  • 0.4055 (10)
  • 0.4062 (10)
  • 0.4094 (10)
  • 0.413 (10)
  • 0.4134 (10)
  • 0.4173 (10)
  • 0.4213 (10)
  • 0.4219 (10)
  • 0.4252 (10)
  • 0.4291 (10)
  • 0.4331 (10)
  • 0.437 (10)
  • 0.4375 (10)
  • 0.4409 (10)
  • 0.4449 (10)
  • 0.4488 (10)
  • 0.4528 (10)
  • 0.4531 (10)
  • 0.4567 (10)
  • 0.4571 (10)
  • 0.4606 (10)
  • 0.4646 (10)
  • 0.4685 (10)
  • 0.4688 (10)
  • 0.4725 (10)
  • 0.4764 (10)
  • 0.4803 (10)
  • 0.4844 (10)
  • 0.4882 (10)
  • 0.4911 (10)
  • 0.4922 (13)
  • 0.4961 (13)
  • 0.5 (13)
  • 0.5039 (13)
  • 0.508 (13)
  • 0.5119 (10)
  • 0.5156 (10)
  • 0.5197 (10)
  • 0.5236 (10)
  • 0.5276 (10)
  • 0.5312 (10)
  • 0.5315 (10)
  • 0.5354 (10)
  • 0.5394 (10)
  • 0.5433 (10)
  • 0.5469 (10)
  • 0.5471 (10)
  • 0.5512 (10)
  • 0.5551 (10)
  • 0.5591 (10)
  • 0.5625 (10)
  • 0.563 (10)
  • 0.5669 (10)
  • 0.5709 (10)
  • 0.5748 (10)
  • 0.5774 (10)
  • 0.5781 (10)
  • 0.5787 (10)
  • 0.5827 (10)
  • 0.5866 (10)
  • 0.5906 (10)
  • 0.5938 (9)
  • 0.5945 (9)
  • 0.5984 (9)
  • 0.6024 (9)
  • 0.6063 (9)
  • 0.6094 (9)
  • 0.6102 (9)
  • 0.6142 (9)
  • 0.6181 (9)
  • 0.622 (9)
  • 0.625 (9)
  • 0.63 (10)
  • 0.631 (10)
  • 0.633 (10)
  • 0.6339 (10)
  • 0.637 (10)
  • 0.6378 (10)
  • 0.6406 (10)
  • 0.6417 (10)
  • 0.6457 (10)
  • 0.6496 (10)
  • 0.6535 (10)
  • 0.6562 (10)
  • 0.6575 (10)
  • 0.6614 (10)
  • 0.6643 (10)
  • 0.6654 (10)
  • 0.6693 (10)
  • 0.6719 (10)
  • 0.6732 (10)
  • 0.6772 (10)
  • 0.6811 (10)
  • 0.685 (10)
  • 0.6875 (10)
  • 0.689 (10)
  • 0.6929 (10)
  • 0.6969 (10)
  • 0.7008 (10)
  • 0.7031 (10)
  • 0.7047 (10)
  • 0.7087 (10)
  • 0.7126 (10)
  • 0.7165 (10)
  • 0.7188 (10)
  • 0.7205 (10)
  • 0.7244 (10)
  • 0.7283 (10)
  • 0.7323 (10)
  • 0.7344 (10)
  • 0.7362 (10)
  • 0.7402 (10)
  • 0.7441 (10)
  • 0.7481 (10)
  • 0.75 (10)
  • 0.752 (10)
  • 0.7559 (10)
  • 0.757 (10)
  • 0.758 (10)
  • 0.759 (10)
  • 0.7598 (10)
  • 0.762 (10)
  • 0.7638 (10)
  • 0.7656 (10)
  • 0.7677 (10)
  • 0.7717 (10)
  • 0.7756 (10)
  • 0.7795 (10)
  • 0.7812 (10)
  • 0.7835 (10)
  • 0.7875 (10)
  • 0.7913 (10)
  • 0.7953 (10)
  • 0.7969 (10)
  • 0.7992 (10)
  • 0.8031 (10)
  • 0.8071 (10)
  • 0.811 (10)
  • 0.8125 (10)
  • 0.815 (10)
  • 0.8189 (10)
  • 0.8228 (10)
  • 0.8264 (10)
  • 0.827 (10)
  • 0.844 (10)
  • 0.846 (10)
  • 0.866 (10)
  • 0.875 (10)
  • 0.884 (10)
  • 0.8866 (10)
  • 0.906 (10)
  • 0.925 (10)
  • 0.9375 (10)
  • 0.945 (10)
  • 0.965 (10)
  • 0.969 (10)
  • 0.984 (10)
  • 1.0 (10)
  • 1.004 (10)
  • 1.011 (10)
  • 1.016 (10)
  • 1.023 (10)
to
Maximum Hole Depth [L4]
  • 1.0 (1)
  • 1.0038 (1)
  • 1.004 (1)
  • 1.0591 (1)
  • 1.0629 (1)
  • 1.063 (1)
  • 1.12 (1)
  • 1.1219 (1)
  • 1.122 (1)
  • 1.18 (2)
  • 1.181 (2)
  • 1.24 (3)
  • 1.299 (1)
  • 1.2991 (1)
  • 1.3 (1)
  • 1.358 (1)
  • 1.3581 (1)
  • 1.36 (1)
  • 1.417 (1)
  • 1.4172 (1)
  • 1.42 (1)
  • 1.476 (1)
  • 1.4763 (1)
  • 1.48 (1)
  • 1.535 (1)
  • 1.5353 (1)
  • 1.54 (2)
  • 1.5944 (1)
  • 1.5945 (1)
  • 1.6 (1)
  • 1.6372 (1)
  • 1.65 (1)
  • 1.6534 (1)
  • 1.6535 (1)
  • 1.67 (1)
  • 1.673 (1)
  • 1.71 (1)
  • 1.7125 (1)
  • 1.7126 (1)
  • 1.77 (2)
  • 1.7715 (2)
  • 1.7717 (2)
  • 1.87 (2)
  • 1.8701 (1)
  • 1.8896 (1)
  • 1.8898 (1)
  • 1.89 (1)
  • 1.968 (1)
  • 1.9685 (1)
  • 1.97 (2)
  • 2.0078 (1)
  • 2.0079 (1)
  • 2.01 (1)
  • 2.0667 (1)
  • 2.0669 (1)
  • 2.07 (1)
  • 2.12 (1)
  • 2.1259 (1)
  • 2.126 (1)
  • 2.16 (1)
  • 2.165 (1)
  • 2.1654 (1)
  • 2.24 (1)
  • 2.244 (1)
  • 2.2441 (1)
  • 2.26 (1)
  • 2.2638 (1)
  • 2.264 (1)
  • 2.36 (2)
  • 2.362 (1)
  • 2.3621 (1)
  • 2.3622 (2)
  • 2.46 (1)
  • 2.4604 (1)
  • 2.4606 (1)
  • 2.48 (1)
  • 2.4802 (1)
  • 2.4803 (1)
  • 2.559 (1)
  • 2.5591 (1)
  • 2.56 (2)
  • 2.598 (1)
  • 2.5984 (2)
  • 2.657 (1)
  • 2.6575 (1)
  • 2.66 (1)
  • 2.6769 (1)
  • 2.6772 (2)
  • 2.716 (1)
  • 2.7165 (2)
  • 2.75 (1)
  • 2.7559 (1)
  • 2.756 (1)
  • 2.8343 (1)
  • 2.8346 (4)
  • 2.835 (1)
  • 2.85 (1)
  • 2.854 (1)
  • 2.8543 (1)
  • 2.95 (1)
  • 2.9528 (3)
  • 2.953 (2)
  • 2.9918 (1)
  • 2.9921 (2)
  • 3.0709 (2)
  • 3.071 (1)
  • 3.149 (1)
  • 3.1493 (1)
  • 3.1496 (4)
  • 3.15 (1)
  • 3.3068 (1)
  • 3.3071 (2)
  • 3.34 (1)
  • 3.346 (1)
  • 3.3465 (1)
  • 3.4643 (1)
  • 3.4646 (1)
  • 3.54 (1)
  • 3.543 (1)
  • 3.5433 (1)
  • 3.6217 (1)
  • 3.622 (2)
  • 3.74 (2)
  • 3.7402 (1)
  • 3.7795 (2)
  • 3.9367 (1)
  • 3.937 (4)
  • 3.94 (1)
  • 4.0942 (1)
  • 4.0945 (3)
  • 4.13 (1)
  • 4.1337 (1)
  • 4.1339 (1)
  • 4.2517 (1)
  • 4.252 (2)
  • 4.33 (1)
  • 4.3305 (1)
  • 4.3307 (2)
  • 4.4091 (1)
  • 4.4094 (2)
  • 4.5274 (1)
  • 4.5276 (2)
  • 4.5666 (1)
  • 4.5669 (2)
  • 4.625 (1)
  • 4.7241 (1)
  • 4.7242 (1)
  • 4.7244 (4)
  • 4.9211 (1)
  • 4.9213 (2)
  • 5.0394 (2)
  • 5.1179 (1)
  • 5.1181 (2)
  • 5.354 (1)
  • 5.3543 (2)
  • 5.669 (1)
  • 5.6693 (2)
  • 5.9839 (1)
  • 5.9843 (2)
  • 6.125 (1)
  • 6.2989 (1)
  • 6.2992 (2)
  • 6.6139 (1)
  • 6.6142 (2)
  • 6.9288 (1)
  • 6.9291 (2)
  • 7.2438 (1)
  • 7.2441 (2)
  • 7.5587 (1)
  • 7.5591 (2)
  • 7.8737 (1)
  • 7.874 (2)
  • 8.1887 (1)
  • 8.189 (2)
to
Maximum Hole Depth [L4]
  • 25.4 (1)
  • 25.496 (1)
  • 25.5 (1)
  • 26.9 (1)
  • 26.998 (1)
  • 27.0 (1)
  • 28.4 (1)
  • 28.496 (1)
  • 28.5 (1)
  • 29.997 (1)
  • 30.0 (3)
  • 31.496 (1)
  • 31.5 (2)
  • 32.997 (1)
  • 33.0 (2)
  • 34.496 (1)
  • 34.5 (2)
  • 36.0 (2)
  • 36.1 (1)
  • 37.498 (1)
  • 37.5 (1)
  • 37.6 (1)
  • 38.997 (1)
  • 39.0 (1)
  • 39.1 (2)
  • 40.498 (1)
  • 40.5 (1)
  • 40.6 (1)
  • 41.9 (1)
  • 41.996 (1)
  • 42.0 (1)
  • 42.4 (1)
  • 42.5 (2)
  • 43.4 (1)
  • 43.498 (1)
  • 43.5 (1)
  • 44.996 (1)
  • 45.0 (5)
  • 47.496 (1)
  • 47.5 (2)
  • 47.996 (1)
  • 48.0 (2)
  • 49.995 (1)
  • 50.0 (3)