Suggestions

Product Suggestions

Product Categories

Resources

successfully added to cart
View Cart

Serie M170

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (65)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (65)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (65)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (65)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (60)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (60)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (60)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (60)
  • M Stainless Steel (60)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (60)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (60)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (60)
  • K Cast Iron (65)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (65)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (65)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (65)
  • S High-Temp Alloys (53)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (53)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (53)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (53)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (53)
  • H Hardened Materials (52)
    • H1
      Hardened Materials 44-48 HRC
      (52)
    • H2
      Hardened Materials 48-55 HRC
      (52)
    • H3
      Hardened Materials 56-60 HRC
      (52)
Applications
Applications
  • Face Milling Face Milling (47)
  • Pocket Pocket (47)
  • Pocket Helical Pocket Helical (47)
  • Pocket Milling Pocket Milling (47)
  • Profile Milling Profile Milling (47)
  • Ramping Ramping (47)
  • Shoulder Ball Nose Shoulder Ball Nose (47)
  • Shoulder Milling Shoulder Milling (47)
  • Slot Milling Slot Milling (47)
  • Slot Square End Slot Square End (47)
Cutting Diameter
Cutting Diameter
  • 5.0 mm (4)
  • 8.0 mm (4)
  • 9.0 mm (3)
  • 10.0 mm (5)
  • 12.0 mm (1)
  • 13.0 mm (3)
  • 15.0 mm (4)
  • 16.0 mm (1)
  • 18.0 mm (1)
  • 20.0 mm (2)
  • 23.0 mm (2)
  • 28.0 mm (1)
  • 30.0 mm (1)
  • 32.0 mm (2)
  • 34.0 mm (1)
  • 36.0 mm (1)
  • 38.0 mm (1)
  • 40.0 mm (2)
  • 42.0 mm (1)
  • 47.0 mm (1)
  • 51.0 mm (1)
  • 54.0 mm (1)
  • 64.0 mm (1)
  • 68.0 mm (1)
  • 88.0 mm (1)
  • 109.0 mm (1)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 0.197 in (4)
  • 0.317 in (4)
  • 0.354 in (3)
  • 0.394 in (5)
  • 0.472 in (1)
  • 0.509 in (1)
  • 0.513 in (2)
  • 0.591 in (4)
  • 0.63 in (1)
  • 0.711 in (1)
  • 0.787 in (2)
  • 0.906 in (2)
  • 1.102 in (1)
  • 1.181 in (1)
  • 1.26 in (2)
  • 1.339 in (1)
  • 1.417 in (1)
  • 1.496 in (1)
  • 1.575 in (2)
  • 1.654 in (1)
  • 1.85 in (1)
  • 2.008 in (1)
  • 2.126 in (1)
  • 2.52 in (1)
  • 2.677 in (1)
  • 3.465 in (1)
  • 4.291 in (1)
Cutting Diameter Min to Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 0.472 in (4)
  • 0.591 in (4)
  • 0.63 in (3)
  • 0.787 in (8)
  • 0.866 in (1)
  • 0.984 in (5)
  • 1.181 in (1)
  • 1.26 in (2)
  • 1.378 in (2)
  • 1.575 in (2)
  • 1.654 in (2)
  • 1.969 in (3)
  • 2.047 in (3)
  • 2.48 in (2)
  • 2.598 in (1)
  • 3.15 in (2)
  • 3.937 in (1)
  • 4.921 in (1)
Maximum Cutting Diameter Min to Maximum Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 12.0 mm (4)
  • 15.0 mm (4)
  • 16.0 mm (3)
  • 20.0 mm (8)
  • 22.0 mm (1)
  • 25.0 mm (5)
  • 30.0 mm (1)
  • 32.0 mm (2)
  • 35.0 mm (2)
  • 40.0 mm (2)
  • 42.0 mm (2)
  • 50.0 mm (3)
  • 52.0 mm (3)
  • 63.0 mm (2)
  • 66.0 mm (1)
  • 80.0 mm (2)
  • 100.0 mm (1)
  • 125.0 mm (1)
Maximum Cutting Diameter Min to Maximum Cutting Diameter Max
Cutting Length
Cutting Length
  • 0.138 in (15)
  • 0.196 in (1)
  • 0.197 in (15)
  • 0.236 in (10)
  • 0.315 in (6)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 3.5 mm (15)
  • 5.0 mm (16)
  • 6.0 mm (10)
  • 8.0 mm (6)
Cutting Length Min to Cutting Length Max
Reach
Reach
  • 20.0 mm (2)
  • 23.0 mm (3)
  • 30.0 mm (4)
  • 35.0 mm (2)
  • 40.0 mm (13)
  • 43.0 mm (4)
  • 45.0 mm (1)
  • 50.0 mm (6)
  • 55.0 mm (1)
  • 60.0 mm (5)
  • 64.0 mm (1)
  • 70.0 mm (1)
  • 80.0 mm (2)
  • 100.0 mm (2)
Reach Min to Reach Max
Reach
Reach
  • 0.787 in (2)
  • 0.906 in (3)
  • 1.181 in (4)
  • 1.378 in (2)
  • 1.575 in (13)
  • 1.693 in (4)
  • 1.772 in (1)
  • 1.969 in (6)
  • 2.165 in (1)
  • 2.362 in (5)
  • 2.52 in (1)
  • 2.756 in (1)
  • 3.15 in (2)
  • 3.937 in (2)
Reach Min to Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (47)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • A-Socket Head Cap Screw (15)
  • B-Cutter Retention Screw (1)
  • Screw-On Connection (12)
  • Straight-Cylindrical (15)
  • Weldon (4)
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 3.4975 mm (14)
  • 3.5 mm (6)
  • 5.0 mm (21)
  • 6.0 mm (15)
  • 8.0 mm (9)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.1377 in (14)
  • 0.1378 in (6)
  • 0.1969 in (21)
  • 0.236 in (15)
  • 0.315 in (9)
Corner Radius Min to Corner Radius Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • TN2505 (52)
  • TN6525 (54)
  • TN6540 (53)
Hand Of Tool
Hand Of Tool
  • R (47)
Wiper Insert
Wiper Insert
  • N (18)
Maximum Ramp Angle
Maximum Ramp Angle
  • 2.2 (2)
  • 3.0 (2)
  • 3.5 (1)
  • 4.5 (3)
  • 5.2 (1)
  • 5.5 (1)
  • 5.8 (1)
  • 6.0 (1)
  • 6.1 (1)
  • 7.2 (1)
  • 8.0 (1)
  • 8.2 (1)
  • 8.5 (2)
  • 9.0 (6)
  • 9.3 (1)
  • 10.0 (1)
  • 10.5 (1)
  • 11.0 (1)
  • 12.0 (4)
  • 12.5 (1)
  • 18.0 (4)
  • 20.0 (6)
  • 22.0 (4)
Maximum Ramp Angle Min to Maximum Ramp Angle Max
frontEnd
Neck Diameter
Neck Diameter
  • 27.0 mm (1)
Neck Diameter Min to Neck Diameter Max
Neck Diameter
Neck Diameter
  • 1.063 in (1)
Neck Diameter Min to Neck Diameter Max
Center Cutting
Center Cutting
insertGeometry
Shape
Shape
  • R-ROUND (18)
Insert IC Size
Insert IC Size
  • 0.2754 in (3)
  • 0.2756 in (2)
  • 0.3937 in (5)
  • 0.472 in (5)
  • 0.63 in (3)
Insert IC Size Min to Insert IC Size Max
Insert IC Size
Insert IC Size
  • 6.995 mm (3)
  • 7.0 mm (2)
  • 10.0 mm (5)
  • 12.0 mm (5)
  • 16.0 mm (3)
Insert IC Size Min to Insert IC Size Max
Chip Breaker CBMD
Chip Breaker CBMD
  • MH (13)
  • MM (5)
Cutting Tool Material
Cutting Tool Material
  • H W (18)
Tolerance Class
Tolerance Class
  • H (2)
  • P (16)
backEnd
Connection Type
Connection Type
  • CYLINDRICAL (19)
  • SCREW-ON (12)
  • SHELL MILL (16)
Back-End Diameter
Back-End Diameter
  • 0.4724 in (1)
  • 0.5039 in (1)
  • 0.5118 in (2)
  • 0.6299 in (8)
  • 0.63 in (2)
  • 0.7087 in (2)
  • 0.7874 in (5)
  • 0.8268 in (2)
  • 0.8661 in (8)
  • 0.9843 in (5)
  • 1.063 in (3)
  • 1.1417 in (5)
  • 1.2598 in (2)
  • 1.5748 in (1)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 12.0 mm (1)
  • 12.8 mm (1)
  • 13.0 mm (2)
  • 16.0 mm (10)
  • 18.0 mm (2)
  • 20.0 mm (5)
  • 21.0 mm (2)
  • 22.0 mm (8)
  • 25.0 mm (5)
  • 27.0 mm (3)
  • 29.0 mm (5)
  • 32.0 mm (2)
  • 40.0 mm (1)
Back-End Diameter Min to Back-End Diameter Max
hidden
Category Path
Category Path
other
Grade
Grade
  • TN2505 (5)
  • TN6525 (7)
  • TN6540 (6)
Tool Unit
Tool Unit
  • I (18)
  • M (65)
Insert Hand
Insert Hand
  • N (18)
Number of Inserts
Number of Inserts
  • 2.0 (18)
  • 3.0 (7)
  • 4.0 (7)
  • 5.0 (6)
  • 6.0 (6)
  • 7.0 (1)
  • 8.0 (2)
Number of Inserts Min to Number of Inserts Max
Over All Length [L]
Over All Length [L]
  • 40.0 mm (8)
  • 40.7 mm (3)
  • 50.0 mm (8)
  • 55.0 mm (1)
  • 57.0 mm (2)
  • 60.0 mm (1)
  • 67.5 mm (4)
  • 69.5 mm (1)
  • 90.0 mm (1)
  • 100.0 mm (1)
  • 110.0 mm (4)
  • 115.0 mm (1)
  • 120.0 mm (1)
  • 125.0 mm (1)
  • 140.0 mm (3)
  • 150.0 mm (2)
  • 160.0 mm (2)
  • 180.0 mm (2)
  • 220.0 mm (1)
Over All Length [L] Min to Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 1.575 in (8)
  • 1.602 in (3)
  • 1.969 in (8)
  • 2.165 in (1)
  • 2.244 in (2)
  • 2.362 in (1)
  • 2.657 in (4)
  • 2.736 in (1)
  • 3.543 in (1)
  • 3.937 in (1)
  • 4.331 in (4)
  • 4.528 in (1)
  • 4.724 in (1)
  • 4.921 in (1)
  • 5.512 in (3)
  • 5.906 in (2)
  • 6.299 in (2)
  • 7.087 in (2)
  • 8.661 in (1)
Over All Length [L] Min to Over All Length [L] Max
Head Length [L2]
Head Length [L2]
  • 20.0 mm (2)
  • 23.0 mm (3)
  • 30.0 mm (4)
  • 35.0 mm (2)
  • 40.0 mm (5)
  • 43.0 mm (4)
  • 45.0 mm (1)
  • 60.0 mm (4)
  • 64.0 mm (1)
  • 70.0 mm (1)
  • 80.0 mm (2)
  • 100.0 mm (2)
Head Length [L2] Min to Head Length [L2] Max
Head Length [L2]
Head Length [L2]
  • 0.787 in (2)
  • 0.906 in (3)
  • 1.181 in (4)
  • 1.378 in (2)
  • 1.575 in (5)
  • 1.693 in (4)
  • 1.772 in (1)
  • 2.362 in (4)
  • 2.52 in (1)
  • 2.756 in (1)
  • 3.15 in (2)
  • 3.937 in (2)
Head Length [L2] Min to Head Length [L2] Max
Solid Indexable Tool
Solid Indexable Tool
No filters matching ""
Narrow by category:
View Products in
Metric
Inch

ORIGINAL PRODUCT

Fresas de copiar • Serie M170

Cuerpos de herramienta M170 • RD1003..
(6 Products)
  • Mango — Liso cilíndricoMango — Liso cilíndrico
  • Perfilado 3DPerfilado 3D
  • Fresado lateral/Fresado en escuadra: Nariz de bolaFresado lateral/Fresado en escuadra: Nariz de bola
  • Ranurado: Placa cuadradaRanurado: Placa cuadrada
  • PlaneadoPlaneado
  • Rectificado en rampa: Material en brutoRectificado en rampa: Material en bruto
  • Mecanizado de alojamientosMecanizado de alojamientos
  • Fresado helicoidalFresado helicoidal
  • Fresado — Con refrigeración internaFresado — Con refrigeración interna
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L1] Gage Length [L1] Gage Length [L2] Head Length [L2] Head Length Half Taper Clearance Angle [BHTCA] [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Kilograms
3940704 M170D020Z02A20RD10L140 M170D020Z02A20RD10L140 20.0000 .7870 10.0000 .3940 20.0 .7874 140.0000 5.512 140.0000 5.512 60.0000 2.362   5.0000 .1970 2 20.000 15900 Y 0.30
    List price:
    $245.82 /each.
    Your price::
    3940705 M170D020Z02A25RD10L160 M170D020Z02A25RD10L160 20.0000 .7870 10.0000 .3940 25.0 .9843 160.0000 6.299 160.0000 6.299 80.0000 3.150 2.000 5.0000 .1970 2 20.000 15900 Y 0.48
      List price:
      $257.53 /each.
      Your price::
      3940706 M170D020Z02A25RD10L180 M170D020Z02A25RD10L180 20.0000 .7870 10.0000 .3940 25.0 .9843 180.0000 7.087 180.0000 7.087 100.0000 3.937 1.500 5.0000 .1970 2 20.000 15900 Y 0.53
        List price:
        $269.24 /each.
        Your price::
        3940707 M170D022Z02A20RD10L160 M170D022Z02A20RD10L160 22.0000 .8660 12.0000 .4720 20.0 .7874 160.0000 6.299 160.0000 6.299 40.0000 1.575   5.0000 .1970 2 12.000 14400 Y 0.35
          List price:
          $257.53 /each.
          Your price::
          3940709 M170D025Z02A25RD10L180 M170D025Z02A25RD10L180 25.0000 .9840 15.0000 .5910 25.0 .9843 180.0000 7.087 180.0000 7.087 70.0000 2.756   5.0000 .1970 2 9.000 12800 Y 0.61
            List price:
            $269.24 /each.
            Your price::
            3940710 M170D025Z02A25RD10L220 M170D025Z02A25RD10L220 25.0000 .9840 15.0000 .5910 25.0 .9843 220.0000 8.661 220.0000 8.661 100.0000 3.937   5.0000 .1970 2 9.000 12800 Y 0.74
              List price:
              $280.94 /each.
              Your price::
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor

              ORIGINAL PRODUCT

              Fresas de copiar • Serie M170

              Cuerpos de herramienta M170 • RD1604..
              (5 Products)
              • Fresado — lateral y planeadoFresado — lateral y planeado
              • Perfilado 3DPerfilado 3D
              • Fresado lateral/Fresado en escuadra: Nariz de bolaFresado lateral/Fresado en escuadra: Nariz de bola
              • Ranurado: Placa cuadradaRanurado: Placa cuadrada
              • PlaneadoPlaneado
              • Rectificado en rampa: Material en brutoRectificado en rampa: Material en bruto
              • Mecanizado de alojamientosMecanizado de alojamientos
              • Fresado helicoidalFresado helicoidal
              • Fresado — Con refrigeración internaFresado — Con refrigeración interna
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D6] Hub Diameter [D6] Hub Diameter [L] Overall Length [L] Overall Length [L1] Gage Length [L1] Gage Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Kilograms
              3926602 M170D050Z04RD16 M170D050Z04RD16 50.0000 1.969 34.0000 1.339 22.0 .8661 44.0000 1.732 40.0000 1.575 40.0000 1.575 8.0000 .3150 4 8.500 7900 Y 0.28
                List price:
                $374.58 /each.
                Your price::
                3934623 M170D052Z04RD16 M170D052Z04RD16 52.0000 2.047 36.0000 1.417 22.0 .8661 44.0000 1.732 50.0000 1.969 50.0000 1.969 8.0000 .3150 4 8.200 7650 Y 0.36
                  List price:
                  $374.58 /each.
                  Your price::
                  3934624 M170D063Z05RD16 M170D063Z05RD16 63.0000 2.480 47.0000 1.850 22.0 .8661 44.0000 1.732 40.0000 1.575 40.0000 1.575 8.0000 .3150 5 5.500 5300 Y 0.39
                    List price:
                    $427.26 /each.
                    Your price::
                    3934626 M170D080Z06RD16 M170D080Z06RD16 80.0000 3.150 64.0000 2.520 27.0 1.063 60.0000 2.362 50.0000 1.969 50.0000 1.969 8.0000 .3150 6 3.000 4900 Y 1.06
                      List price:
                      $526.76 /each.
                      Your price::
                      3934629 M170D125Z08RD16 M170D125Z08RD16 125.0000 4.921 109.0000 4.291 40.0 1.574 90.0000 3.543 60.0000 2.362 60.0000 2.362 8.0000 .3150 8 2.200 3200 Y 2.90
                        Your price::
                        List price:
                        Discount: %
                        Your price::
                        Replacement This item is not available
                        Replacement Product This item may be available through a distributor

                        ORIGINAL PRODUCT

                        Fresas de copiar • Serie M170

                        Cuerpos de herramienta M170 • RD12T3..
                        (1 Products)
                        • Mango — Weldon cilíndrico 2 planoMango — Weldon cilíndrico 2 plano
                        • Perfilado 3DPerfilado 3D
                        • Fresado lateral/Fresado en escuadra: Nariz de bolaFresado lateral/Fresado en escuadra: Nariz de bola
                        • Ranurado: Placa cuadradaRanurado: Placa cuadrada
                        • PlaneadoPlaneado
                        • Rectificado en rampa: Material en brutoRectificado en rampa: Material en bruto
                        • Mecanizado de alojamientosMecanizado de alojamientos
                        • Fresado helicoidalFresado helicoidal
                        • Fresado — Con refrigeración internaFresado — Con refrigeración interna
                        View Products
                        SAP Material Number ISO Catalog Number ANSI Catalog Number [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L1] Gage Length [L1] Gage Length [L2] Head Length [L2] Head Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Kilograms
                        3930960 M170D032Z03B32RD12 M170D032Z03B32RD12 32.0000 1.260 20.0000 .7870 32.0 1.259 125.0000 4.921 125.0000 4.921 64.0000 2.520 6.0000 .2360 3 12.000 9500 Y 0.63
                          List price:
                          $280.94 /each.
                          Your price::
                          List price:
                          Discount: %
                          Your price::
                          Replacement This item is not available
                          Replacement Product This item may be available through a distributor

                          ORIGINAL PRODUCT

                          Fresas de copiar • Serie M170

                          Cuerpos de herramienta M170 • RD1003..
                          (2 Products)
                          • Mango — Weldon cilíndrico 2 planoMango — Weldon cilíndrico 2 plano
                          • Perfilado 3DPerfilado 3D
                          • Fresado lateral/Fresado en escuadra: Nariz de bolaFresado lateral/Fresado en escuadra: Nariz de bola
                          • Ranurado: Placa cuadradaRanurado: Placa cuadrada
                          • PlaneadoPlaneado
                          • Rectificado en rampa: Material en brutoRectificado en rampa: Material en bruto
                          • Mecanizado de alojamientosMecanizado de alojamientos
                          • Fresado helicoidalFresado helicoidal
                          • Fresado — Con refrigeración internaFresado — Con refrigeración interna
                          View Products
                          SAP Material Number ISO Catalog Number ANSI Catalog Number [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L1] Gage Length [L1] Gage Length [L2] Head Length [L2] Head Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Kilograms
                          3940703 M170D020Z02B20RD10 M170D020Z02B20RD10 20.0000 .7870 10.0000 .3940 20.0 .7874 110.0000 4.331 110.0000 4.331 40.0000 1.575 5.0000 .1970 2 20.000 15900 Y 0.24
                            List price:
                            $234.12 /each.
                            Your price::
                            3940708 M170D025Z03B25RD10 M170D025Z03B25RD10 25.0000 .9840 15.0000 .5910 25.0 .9843 110.0000 4.331 110.0000 4.331 40.0000 1.575 5.0000 .1970 3 9.000 12900 Y 0.35
                              List price:
                              $269.24 /each.
                              Your price::
                              List price:
                              Discount: %
                              Your price::
                              Replacement This item is not available
                              Replacement Product This item may be available through a distributor

                              ORIGINAL PRODUCT

                              Fresas de copiar • Serie M170

                              Cuerpos de herramienta M170 • RD0702..
                              (1 Products)
                              • Mango — Weldon cilíndrico 2 planoMango — Weldon cilíndrico 2 plano
                              • Perfilado 3DPerfilado 3D
                              • Fresado lateral/Fresado en escuadra: Nariz de bolaFresado lateral/Fresado en escuadra: Nariz de bola
                              • Ranurado: Placa cuadradaRanurado: Placa cuadrada
                              • PlaneadoPlaneado
                              • Rectificado en rampa: Material en brutoRectificado en rampa: Material en bruto
                              • Mecanizado de alojamientosMecanizado de alojamientos
                              • Fresado helicoidalFresado helicoidal
                              • Fresado — Con refrigeración internaFresado — Con refrigeración interna
                              View Products
                              SAP Material Number ISO Catalog Number ANSI Catalog Number [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L1] Gage Length [L1] Gage Length [L2] Head Length [L2] Head Length Half Taper Clearance Angle [BHTCA] [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Kilograms
                              3929403 M170D015Z02B16RD07 M170D015Z02B16RD07 15.0000 .5910 8.0000 .3170 16.0 .6299 90.0000 3.543 90.0000 3.543 40.0000 1.575 1.000 3.5000 .1380 2 18.000 21200 Y 0.11
                                List price:
                                $204.04 /each.
                                Your price::
                                List price:
                                Discount: %
                                Your price::
                                Replacement This item is not available
                                Replacement Product This item may be available through a distributor

                                ORIGINAL PRODUCT

                                Fresas de copiar • Serie M170

                                Cuerpos de herramienta M170 • RD07T1..
                                (3 Products)
                                • Mango — Liso cilíndricoMango — Liso cilíndrico
                                • Perfilado 3DPerfilado 3D
                                • Fresado lateral/Fresado en escuadra: Nariz de bolaFresado lateral/Fresado en escuadra: Nariz de bola
                                • Ranurado: Placa cuadradaRanurado: Placa cuadrada
                                • PlaneadoPlaneado
                                • Rectificado en rampa: Material en brutoRectificado en rampa: Material en bruto
                                • Mecanizado de alojamientosMecanizado de alojamientos
                                • Fresado helicoidalFresado helicoidal
                                • Fresado — Con refrigeración internaFresado — Con refrigeración interna
                                View Products
                                SAP Material Number ISO Catalog Number ANSI Catalog Number [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L1] Gage Length [L1] Gage Length [L2] Head Length [L2] Head Length Half Taper Clearance Angle [BHTCA] [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Kilograms
                                3935339 M170D012Z02A12RD07TL100 M170D012Z02A12RD07TL100 12.0000 .4720 5.0000 .1970 12.0 .4724 100.0000 3.937 100.0000 3.937 20.0000 .7870   3.5000 .1380 2 22.000 26200 Y 0.07
                                  List price:
                                  $186.82 /each.
                                  Your price::
                                  3935340 M170D012Z02A16RD07TL120 M170D012Z02A16RD07TL120 12.0000 .4720 5.0000 .1970 16.0 .63 120.0000 4.724 120.0000 4.724 60.0000 2.362 2.000 3.5000 .1380 2 22.000 26200 Y 0.14
                                    List price:
                                    $199.00 /each.
                                    Your price::
                                    3935341 M170D012Z02A16RD07TL140 M170D012Z02A16RD07TL140 12.0000 .4720 5.0000 .1970 16.0 .63 140.0000 5.512 140.0000 5.512 80.0000 3.150 1.500 3.5000 .1380 2 22.000 26200 Y 0.16
                                      List price:
                                      $216.55 /each.
                                      Your price::