Top Drill S™ • Acero y fundición

Seleccionar filtros
Filtros
Ver filtros en
Metric
Inch
keyFilters
Material de la pieza de trabajo
Material de la pieza de trabajo
  • P Acero (202)
    • P0
      Aceros con bajo contenido de carbono, virutas largas C < 0,25 %; <125 HB; <530 N/mm^2 UTS (202)
    • P1
      Aceros con bajo contenido de carbono, virutas cortas C < 0,25 %; <125 HB; <530 N/mm^2 UTS (202)
    • P2
      Aceros al carbono medios y altos C < 0,25 %; <220 HB; <25 HRC; >530 N/mm^2 UTS (202)
    • P3
      Aceros aleados y aceros para herramientas C > 0,25 %; <330 HB; <35 HRC; entre 600 y 850 N/mm^2 UTS (202)
    • P4
      Aceros aleados y aceros para herramientas C > 0,25 %; entre 350 y 420 HB; entre 35 y 43 HRC; entre 850 y 1400 N/mm^2 UTS (202)
    • P5
      Aceros ferríticos, martensíticos e inoxidables PH <330 HB; <35 HRC; entre 600 y 900 N/mm^2 UTS (202)
    • P6
      Aceros ferríticos, martensíticos e inoxidables PH de alta resistencia Entre 350 y 450 HB; entre 35 y 43 HRC; entre 900 y 2400 N/mm^2 UTS (202)
  • M Acero inoxidable (202)
    • M1
      Acero inoxidable austenítico Entre 130 y 200 HB; <600 N/mm^2 UTS (202)
    • M2
      Aceros inoxidables fundidos e inoxidables austeníticos de alta resistencia Entre 150 y 230 HB; <25 HRC; <600 N/mm^2 UTS (202)
    • M3
      Acero inoxidable dúplex Entre 135 y 275 HB; <30 HRC; entre 500 y 1200 N/mm^2 UTS (202)
  • K Fundición (114)
    • K1
      Fundición gris Entre 120 y 290 HB; <32 HRC; entre 125 y 500 N/mm^2 UTS (114)
    • K2
      Fundiciones dúctiles y CGI de baja y media resistencia Entre 130 y 260 HB; <28 HRC; <600 N/mm^2 UTS (114)
    • K3
      Fundición austenítica y dúctil de alta resistencia Entre 180 y 350 HB; <43 HRC; >600 N/mm^2 UTS (114)
Select All Star
  • IN (13)
  • SG (95)
Aplicaciones
Aplicaciones
  • CornerStyle Chamfer Drilling CornerStyle Chamfer Drilling (193)
  • Cross Hole Drilling Cross Hole Drilling (34)
  • Drilling Drilling (466)
  • Inclined Exit Drilling Inclined Exit Drilling (34)
  • Stacked Plates Drilling Stacked Plates Drilling (99)
Diámetro del corte
Diámetro del corte
  • 0.119 in (3)
  • 0.12 in (4)
  • 0.125 in (4)
  • 0.126 in (1)
  • 0.129 in (4)
  • 0.13 in (1)
  • 0.136 in (3)
  • 0.138 in (2)
  • 0.142 in (1)
  • 0.143 in (1)
  • 0.145 in (5)
  • 0.147 in (4)
  • 0.15 in (1)
  • 0.156 in (1)
  • 0.157 in (4)
  • 0.159 in (3)
  • 0.161 in (7)
  • 0.165 in (2)
  • 0.166 in (3)
  • 0.169 in (2)
  • 0.177 in (2)
  • 0.182 in (3)
  • 0.188 in (3)
  • 0.191 in (5)
  • 0.193 in (1)
  • 0.197 in (2)
  • 0.201 in (5)
  • 0.203 in (2)
  • 0.213 in (5)
  • 0.217 in (2)
  • 0.219 in (4)
  • 0.221 in (5)
  • 0.228 in (3)
  • 0.234 in (1)
  • 0.237 in (3)
  • 0.244 in (1)
  • 0.248 in (1)
  • 0.25 in (3)
  • 0.256 in (3)
  • 0.257 in (4)
  • 0.261 in (2)
  • 0.266 in (4)
  • 0.268 in (4)
  • 0.272 in (1)
  • 0.276 in (2)
  • 0.281 in (1)
  • 0.288 in (1)
  • 0.291 in (1)
  • 0.297 in (1)
  • 0.307 in (2)
  • 0.313 in (3)
  • 0.315 in (4)
  • 0.323 in (1)
  • 0.328 in (1)
  • 0.332 in (2)
  • 0.335 in (5)
  • 0.345 in (3)
  • 0.347 in (1)
  • 0.354 in (3)
  • 0.359 in (1)
  • 0.362 in (1)
  • 0.366 in (2)
  • 0.368 in (5)
  • 0.374 in (2)
  • 0.375 in (3)
  • 0.378 in (1)
  • 0.382 in (1)
  • 0.386 in (1)
  • 0.391 in (1)
  • 0.394 in (2)
  • 0.402 in (2)
  • 0.406 in (2)
  • 0.408 in (2)
  • 0.41 in (1)
  • 0.414 in (3)
  • 0.421 in (1)
  • 0.422 in (3)
  • 0.425 in (1)
  • 0.433 in (4)
  • 0.437 in (1)
  • 0.438 in (2)
  • 0.441 in (1)
  • 0.445 in (2)
  • 0.453 in (2)
  • 0.457 in (1)
  • 0.465 in (2)
  • 0.47 in (3)
  • 0.473 in (5)
  • 0.48 in (1)
  • 0.484 in (4)
  • 0.488 in (1)
  • 0.492 in (3)
  • 0.496 in (3)
  • 0.5 in (2)
  • 0.512 in (5)
  • 0.516 in (3)
  • 0.528 in (1)
  • 0.531 in (4)
  • 0.535 in (2)
  • 0.543 in (1)
  • 0.547 in (3)
  • 0.551 in (2)
  • 0.555 in (2)
  • 0.559 in (1)
  • 0.564 in (2)
  • 0.568 in (3)
  • 0.572 in (2)
  • 0.576 in (3)
  • 0.578 in (4)
  • 0.579 in (1)
  • 0.583 in (3)
  • 0.587 in (4)
  • 0.591 in (1)
  • 0.594 in (4)
  • 0.595 in (4)
  • 0.598 in (3)
  • 0.602 in (2)
  • 0.606 in (4)
  • 0.609 in (5)
  • 0.61 in (2)
  • 0.614 in (2)
  • 0.618 in (5)
  • 0.622 in (4)
  • 0.625 in (3)
  • 0.626 in (3)
  • 0.63 in (2)
  • 0.634 in (2)
  • 0.638 in (6)
  • 0.641 in (3)
  • 0.642 in (4)
  • 0.646 in (5)
  • 0.654 in (5)
  • 0.656 in (4)
  • 0.657 in (3)
  • 0.661 in (3)
  • 0.665 in (6)
  • 0.673 in (5)
  • 0.677 in (6)
  • 0.681 in (5)
  • 0.685 in (6)
  • 0.689 in (3)
  • 0.69 in (1)
  • 0.694 in (4)
  • 0.698 in (5)
  • 0.702 in (2)
  • 0.704 in (5)
  • 0.705 in (4)
  • 0.709 in (1)
  • 0.713 in (4)
  • 0.717 in (5)
  • 0.719 in (5)
  • 0.72 in (6)
  • 0.728 in (4)
  • 0.734 in (6)
  • 0.74 in (5)
  • 0.75 in (2)
  • 0.756 in (5)
  • 0.76 in (5)
  • 0.768 in (6)
  • 0.78 in (5)
  • 0.787 in (2)
Diámetro del corte Min a Diámetro del corte Max
Diámetro del corte
Diámetro del corte
  • 3.0 mm (3)
  • 3.051 mm (4)
  • 3.176 mm (4)
  • 3.2 mm (1)
  • 3.276 mm (4)
  • 3.301 mm (1)
  • 3.45 mm (3)
  • 3.5 mm (2)
  • 3.575 mm (1)
  • 3.6 mm (1)
  • 3.651 mm (5)
  • 3.725 mm (4)
  • 3.801 mm (1)
  • 3.975 mm (1)
  • 4.0 mm (4)
  • 4.05 mm (3)
  • 4.101 mm (7)
  • 4.2 mm (2)
  • 4.226 mm (3)
  • 4.3 mm (2)
  • 4.5 mm (2)
  • 4.625 mm (3)
  • 4.775 mm (3)
  • 4.851 mm (5)
  • 4.9 mm (1)
  • 5.0 mm (2)
  • 5.101 mm (5)
  • 5.15 mm (2)
  • 5.4 mm (5)
  • 5.5 mm (2)
  • 5.551 mm (4)
  • 5.601 mm (1)
  • 5.625 mm (4)
  • 5.801 mm (3)
  • 5.95 mm (1)
  • 6.0 mm (3)
  • 6.2 mm (1)
  • 6.301 mm (1)
  • 6.351 mm (3)
  • 6.5 mm (3)
  • 6.525 mm (4)
  • 6.625 mm (2)
  • 6.75 mm (4)
  • 6.801 mm (4)
  • 6.9 mm (1)
  • 7.0 mm (2)
  • 7.15 mm (1)
  • 7.301 mm (1)
  • 7.4 mm (1)
  • 7.551 mm (1)
  • 7.801 mm (2)
  • 7.95 mm (3)
  • 8.0 mm (4)
  • 8.201 mm (1)
  • 8.326 mm (1)
  • 8.425 mm (2)
  • 8.5 mm (5)
  • 8.725 mm (3)
  • 8.8 mm (1)
  • 9.0 mm (3)
  • 9.125 mm (1)
  • 9.201 mm (1)
  • 9.3 mm (2)
  • 9.35 mm (5)
  • 9.5 mm (2)
  • 9.525 mm (3)
  • 9.601 mm (1)
  • 9.701 mm (1)
  • 9.8 mm (1)
  • 9.925 mm (1)
  • 10.0 mm (2)
  • 10.201 mm (2)
  • 10.3 mm (2)
  • 10.326 mm (2)
  • 10.4 mm (1)
  • 10.5 mm (3)
  • 10.701 mm (1)
  • 10.726 mm (3)
  • 10.8 mm (1)
  • 11.0 mm (4)
  • 11.101 mm (1)
  • 11.125 mm (2)
  • 11.201 mm (1)
  • 11.3 mm (2)
  • 11.5 mm (2)
  • 11.601 mm (1)
  • 11.8 mm (2)
  • 11.9 mm (3)
  • 12.0 mm (5)
  • 12.201 mm (1)
  • 12.3 mm (4)
  • 12.4 mm (1)
  • 12.5 mm (3)
  • 12.601 mm (3)
  • 12.701 mm (2)
  • 13.0 mm (5)
  • 13.101 mm (3)
  • 13.4 mm (1)
  • 13.5 mm (4)
  • 13.601 mm (2)
  • 13.8 mm (1)
  • 13.9 mm (3)
  • 14.0 mm (2)
  • 14.101 mm (2)
  • 14.201 mm (1)
  • 14.3 mm (2)
  • 14.4 mm (3)
  • 14.5 mm (2)
  • 14.601 mm (3)
  • 14.675 mm (4)
  • 14.701 mm (1)
  • 14.8 mm (3)
  • 14.9 mm (4)
  • 15.0 mm (1)
  • 15.076 mm (4)
  • 15.101 mm (4)
  • 15.201 mm (3)
  • 15.3 mm (2)
  • 15.4 mm (4)
  • 15.476 mm (5)
  • 15.5 mm (2)
  • 15.601 mm (2)
  • 15.701 mm (5)
  • 15.8 mm (4)
  • 15.875 mm (3)
  • 15.9 mm (3)
  • 16.0 mm (2)
  • 16.1 mm (2)
  • 16.2 mm (6)
  • 16.276 mm (3)
  • 16.3 mm (4)
  • 16.401 mm (5)
  • 16.6 mm (5)
  • 16.675 mm (4)
  • 16.7 mm (3)
  • 16.8 mm (3)
  • 16.901 mm (6)
  • 17.1 mm (5)
  • 17.2 mm (6)
  • 17.3 mm (5)
  • 17.401 mm (6)
  • 17.475 mm (3)
  • 17.5 mm (1)
  • 17.6 mm (4)
  • 17.7 mm (5)
  • 17.8 mm (2)
  • 17.85 mm (5)
  • 17.901 mm (4)
  • 18.0 mm (1)
  • 18.1 mm (4)
  • 18.2 mm (5)
  • 18.25 mm (5)
  • 18.3 mm (6)
  • 18.5 mm (4)
  • 18.651 mm (6)
  • 18.8 mm (5)
  • 19.05 mm (2)
  • 19.201 mm (5)
  • 19.3 mm (5)
  • 19.5 mm (6)
  • 19.8 mm (5)
  • 20.0 mm (2)
Diámetro del corte Min a Diámetro del corte Max
Profundidad de taladrado máxima [L4]
Profundidad de taladrado máxima [L4]
  • 14.0 mm (9)
  • 17.0 mm (7)
  • 20.0 mm (15)
  • 23.0 mm (12)
  • 24.0 mm (9)
  • 29.0 mm (18)
  • 33.0 mm (12)
  • 35.0 mm (30)
  • 40.0 mm (15)
  • 41.0 mm (9)
  • 43.0 mm (28)
  • 45.0 mm (26)
  • 48.0 mm (11)
  • 49.0 mm (13)
  • 51.0 mm (29)
  • 55.0 mm (21)
  • 56.0 mm (18)
  • 57.0 mm (5)
  • 60.0 mm (11)
  • 63.0 mm (16)
  • 64.0 mm (3)
  • 71.0 mm (28)
  • 77.0 mm (18)
  • 80.0 mm (8)
  • 96.0 mm (5)
  • 101.0 mm (1)
  • 112.0 mm (11)
  • 113.0 mm (31)
  • 124.0 mm (21)
  • 128.0 mm (26)
Profundidad de taladrado máxima [L4] Min a Profundidad de taladrado máxima [L4] Max
Profundidad de taladrado máxima [L4]
Profundidad de taladrado máxima [L4]
  • 0.551 in (9)
  • 0.669 in (7)
  • 0.787 in (15)
  • 0.906 in (12)
  • 0.946 in (9)
  • 1.143 in (18)
  • 1.299 in (12)
  • 1.379 in (30)
  • 1.575 in (15)
  • 1.614 in (9)
  • 1.693 in (28)
  • 1.772 in (26)
  • 1.891 in (11)
  • 1.929 in (13)
  • 2.008 in (29)
  • 2.165 in (21)
  • 2.205 in (18)
  • 2.244 in (5)
  • 2.362 in (11)
  • 2.48 in (16)
  • 2.52 in (3)
  • 2.795 in (28)
  • 3.031 in (18)
  • 3.15 in (8)
  • 3.781 in (5)
  • 3.976 in (1)
  • 4.409 in (11)
  • 4.449 in (31)
  • 4.882 in (21)
  • 5.039 in (26)
Profundidad de taladrado máxima [L4] Min a Profundidad de taladrado máxima [L4] Max