successfully added to cart
View Cart

Unidades de corte KM80ATC™

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (42)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (42)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (42)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (42)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (42)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (42)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (42)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (42)
  • M Stainless Steel (40)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (40)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (40)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (40)
  • K Cast Iron (42)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (42)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (42)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (42)
  • N Non-Ferrous Materials (27)
    • N1
      Wrought Aluminum
      (27)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (27)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (13)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (27)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (27)
    • N6
      Carbon, Graphite Composites, CFRP
      (25)
    • N7
      MMC's
      (25)
  • S High-Temp Alloys (38)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (38)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (38)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (38)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (38)
  • H Hardened Materials (20)
    • H1
      Hardened Materials 44-48 HRC
      (20)
    • H2
      Hardened Materials 48-55 HRC
      (18)
    • H3
      Hardened Materials 56-60 HRC
      (18)
    • H4
      Hardened Materials >60 HRC
      (16)
Applications
  • Back Boring Back Boring (4)
  • Chamfer Turning Chamfer Turning (30)
  • Cut-Off Cut-Off (4)
  • Deep Grooving Deep Grooving (4)
  • Face Grooving Face Grooving (4)
  • Facing Facing (34)
  • Grooving Grooving (12)
  • ID Facing ID Facing (4)
  • ID Grooving ID Grooving (10)
  • ID Thread Turning ID Thread Turning (10)
  • Multiple Direction Cutting Multiple Direction Cutting (42)
  • OD Thread Turning OD Thread Turning (12)
  • Plunge Turning Plunge Turning (30)
  • Profiling Profiling (30)
  • TRN Boring TRN Boring (25)
  • Threading Threading (12)
  • Turning Turning (34)
Type of Thread
  • 60 (8)
  • ACME (10)
  • API (8)
  • API RD (6)
  • BSW (4)
  • BUTTRESS (8)
  • M (4)
  • NPT (4)
  • STUB ACME (4)
  • UN (8)
  • UNJ (4)
Cutting Condition
  • Heavily Interrupted Cut (40)
  • Interrupted (11)
  • Lightly Interrupted Cut (40)
  • Smooth Cut (40)
  • Varying Depth of Cut (40)
Tool Cutting Edge Angle
  • 45.0 (2)
  • 75.0 (16)
  • 90.0 (18)
  • 93.0 (2)
  • 95.0 (4)
to
Connection Style
  • KM (30)
Cutting Edges Per Insert
  • 1.0 (22)
  • 2.0 (26)
  • 4.0 (24)
  • 8.0 (24)
to
Internal Coolant Capability
cornerConfiguration
Corner Radius
  • 0.051 (2)
  • 0.057 (2)
  • 0.066 (4)
  • 0.076 (8)
  • 0.08 (4)
  • 0.094 (4)
  • 0.097 (2)
  • 0.1 (6)
  • 0.102 (4)
  • 0.116 (2)
  • 0.117 (2)
  • 0.127 (4)
  • 0.131 (4)
  • 0.132 (4)
  • 0.133 (4)
  • 0.15 (4)
  • 0.155 (4)
  • 0.157 (4)
  • 0.16 (4)
  • 0.165 (8)
  • 0.173 (4)
  • 0.178 (4)
  • 0.19 (8)
  • 0.191 (8)
  • 0.198 (4)
  • 0.2 (6)
  • 0.202 (4)
  • 0.203 (2)
  • 0.224 (4)
  • 0.235 (4)
  • 0.244 (2)
  • 0.25 (4)
  • 0.251 (4)
  • 0.254 (8)
  • 0.269 (4)
  • 0.282 (4)
  • 0.284 (4)
  • 0.3 (4)
  • 0.315 (6)
  • 0.318 (10)
  • 0.33 (4)
  • 0.34 (4)
  • 0.343 (4)
  • 0.356 (4)
  • 0.397 (2)
  • 0.4 (2)
  • 0.404 (4)
  • 0.406 (6)
  • 0.43 (4)
  • 0.445 (8)
  • 0.472 (2)
  • 0.49 (4)
  • 0.508 (4)
  • 0.565 (2)
  • 0.57 (2)
  • 0.572 (10)
  • 0.575 (6)
  • 0.787 (4)
  • 0.794 (2)
  • 0.8 (13)
  • 0.826 (4)
  • 0.902 (8)
  • 1.0 (4)
  • 1.191 (7)
  • 1.194 (4)
  • 1.195 (2)
  • 1.2 (13)
  • 1.25 (4)
  • 1.5 (4)
  • 1.585 (4)
  • 1.588 (19)
  • 1.59 (2)
  • 1.6 (22)
  • 1.75 (4)
  • 1.98 (2)
  • 1.981 (4)
  • 2.0 (8)
  • 2.25 (8)
  • 2.381 (11)
  • 2.388 (8)
  • 2.39 (2)
  • 2.4 (22)
  • 2.5 (4)
  • 3.175 (4)
  • 3.18 (2)
  • 3.2 (10)
  • 4.0 (5)
  • 10.0 (2)
  • 12.5 (2)
  • 16.0 (2)
to
Corner Radius
  • 0.002 (2)
  • 0.0023 (2)
  • 0.0026 (4)
  • 0.003 (8)
  • 0.0031 (4)
  • 0.0037 (4)
  • 0.0038 (2)
  • 0.004 (6)
  • 0.0046 (4)
  • 0.005 (4)
  • 0.0052 (4)
  • 0.0053 (4)
  • 0.0059 (4)
  • 0.006 (4)
  • 0.0062 (4)
  • 0.0065 (8)
  • 0.0068 (4)
  • 0.007 (4)
  • 0.0075 (8)
  • 0.0078 (4)
  • 0.0079 (2)
  • 0.008 (6)
  • 0.0088 (4)
  • 0.0093 (4)
  • 0.0096 (2)
  • 0.0099 (4)
  • 0.01 (8)
  • 0.0106 (4)
  • 0.0111 (4)
  • 0.0112 (4)
  • 0.0118 (4)
  • 0.0124 (4)
  • 0.0125 (10)
  • 0.013 (4)
  • 0.0135 (8)
  • 0.014 (4)
  • 0.0156 (2)
  • 0.0159 (4)
  • 0.016 (8)
  • 0.017 (4)
  • 0.0175 (8)
  • 0.0186 (2)
  • 0.0193 (4)
  • 0.02 (4)
  • 0.0225 (10)
  • 0.031 (12)
  • 0.0312 (2)
  • 0.0313 (13)
  • 0.0325 (4)
  • 0.0355 (8)
  • 0.0394 (4)
  • 0.0469 (13)
  • 0.047 (15)
  • 0.0492 (4)
  • 0.0591 (4)
  • 0.0625 (30)
  • 0.063 (11)
  • 0.0689 (4)
  • 0.078 (4)
  • 0.0787 (8)
  • 0.0886 (8)
  • 0.0928 (6)
  • 0.0938 (22)
  • 0.094 (18)
  • 0.0984 (4)
  • 0.106 (2)
  • 0.125 (9)
  • 0.126 (5)
  • 0.1575 (5)
  • 0.3935 (2)
  • 0.3937 (2)
  • 0.492 (2)
  • 0.4922 (2)
  • 0.6299 (2)
  • 0.63 (2)
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • 13E (8)
  • CG4 (2)
  • CL4 (13)
  • CM2 (7)
  • CM3 (13)
  • CM5 (2)
  • CPX (13)
  • CW2015 (8)
  • CW5025 (8)
  • GX (13)
  • HK1500 (6)
  • K090 (13)
  • K1 (16)
  • K10M (13)
  • K10P (8)
  • K10U (2)
  • K15U (2)
  • K20K (13)
  • K21 (11)
  • K25M (2)
  • K25P (13)
  • K2885 (4)
  • K313 (23)
  • K35P (5)
  • K420 (34)
  • K45 (2)
  • K4H (4)
  • K68 (27)
  • KB1345 (8)
  • KB1610 (2)
  • KB1625 (2)
  • KB1630 (10)
  • KB5610 (2)
  • KB5625 (6)
  • KB5630 (2)
  • KB9610 (2)
  • KBH10 (2)
  • KBH10B (2)
  • KBH20 (2)
  • KBH20B (2)
  • KC210 (11)
  • KC250 (15)
  • KC5010 (36)
  • KC5025 (25)
  • KC5410 (21)
  • KC5510 (13)
  • KC710 (8)
  • KC720 (15)
  • KC722 (8)
  • KC730 (25)
  • KC7310 (13)
  • KC732 (6)
  • KC8050 (26)
  • KC810 (25)
  • KC850 (38)
  • KC9010 (15)
  • KC9025 (24)
  • KC910 (17)
  • KC9105 (8)
  • KC9110 (38)
  • KC9120 (28)
  • KC9125 (30)
  • KC9140 (24)
  • KC9145 (22)
  • KC9215 (13)
  • KC9225 (13)
  • KC9240 (28)
  • KC9240NEW (22)
  • KC9245 (13)
  • KC9315 (15)
  • KC9320 (21)
  • KC9325 (13)
  • KC935 (27)
  • KC950 (26)
  • KC990 (18)
  • KCK05 (13)
  • KCK05B (13)
  • KCK15 (13)
  • KCK15B (15)
  • KCK20 (25)
  • KCK20B (29)
  • KCM15 (13)
  • KCM15B (8)
  • KCM25 (20)
  • KCM25B (18)
  • KCM35 (13)
  • KCM35B (11)
  • KCP05 (2)
  • KCP05B (7)
  • KCP10 (30)
  • KCP10B (30)
  • KCP25 (30)
  • KCP25B (36)
  • KCP30 (26)
  • KCP30B (22)
  • KCP40 (22)
  • KCP40B (22)
  • KCPK05 (17)
  • KCS10 (2)
  • KCS10B (13)
  • KCU10 (36)
  • KCU25 (26)
  • KD050 (4)
  • KD081 (6)
  • KD100 (8)
  • KD120 (10)
  • KD1400 (2)
  • KD1405 (2)
  • KD1425 (6)
  • KM1 (7)
  • KT1120 (2)
  • KT125 (2)
  • KT150 (2)
  • KT175 (6)
  • KT315 (10)
  • KT5020 (2)
  • KU10T (10)
  • KU25T (8)
  • KU30T (21)
  • KY1320 (8)
  • KY1540 (6)
  • KY1615 (10)
  • KY2000 (6)
  • KY3000 (21)
  • KY3400 (11)
  • KY3500 (13)
  • KY4000 (2)
  • KY4300 (6)
  • KY4400 (8)
  • KYHK15B (8)
  • KYK25 (6)
  • KYK35 (13)
  • KYS25 (6)
  • KYS30 (6)
  • MC2 (2)
  • NL250 (13)
  • NL300 (24)
  • NL400 (11)
  • NL920 (10)
  • SP0819 (11)
  • SP3019 (11)
  • SP4019 (6)
  • SP4036 (2)
  • SP4093 (2)
  • SPADAP (22)
  • SPN4W2 (5)
  • THM (15)
  • TN10P (14)
  • TN10U (2)
  • TN15M (13)
  • TN15U (2)
  • TN2000 (11)
  • TN20K (13)
  • TN20P (13)
  • TN30M (13)
  • TN30P (17)
  • TN4000 (11)
  • TN5015 (11)
  • TN5020 (13)
  • TN5120 (11)
  • TN6010 (10)
  • TN6025 (11)
  • TN7010 (13)
  • TN7015 (24)
  • TN7025 (24)
  • TN7035 (13)
  • TN7110 (16)
  • TN7115 (24)
  • TN7125 (24)
  • TN7135 (13)
  • TN8025 (22)
  • TTM09 (5)
  • TTR (2)
  • TTR-X (5)
  • TTS (11)
  • W00342 (5)
  • WBH10C (2)
  • WBH10P (2)
  • WBH10U (2)
  • WBH20P (2)
  • WBH25P (2)
  • WBH30P (2)
  • WDN25U (2)
  • WK05CT (13)
  • WK20CT (15)
  • WM15CT (13)
  • WM25CT (18)
  • WM35CT (13)
  • WP15CT (26)
  • WP25CT (26)
  • WP35CT (26)
  • WS10PT (13)
  • WS25PT (13)
  • WU10HT (10)
  • WU10PT (4)
  • WU25PT (2)
  • YY72VD (2)
Hand Of Tool
  • L (14)
  • N (2)
  • R (14)
Wiper Insert
  • N (42)
  • Y (4)
Minimum Axial Groove Diameter
  • 0.0 (4)
  • 1.626 (2)
  • 1.874 (2)
  • 2.252 (2)
  • 3.5 (2)
  • 4.173 (21)
  • 4.1732 (3)
  • 5.5 (2)
  • 6.874 (2)
  • 8.252 (2)
  • 8.752 (2)
to
Minimum Axial Groove Diameter
  • 0.0 (4)
  • 41.3 (2)
  • 47.6 (2)
  • 57.2 (2)
  • 88.9 (2)
  • 106.0 (24)
  • 139.7 (2)
  • 174.6 (2)
  • 209.6 (2)
  • 222.3 (2)
to
Maximum Axial Groove Diameter
  • 9999.0 (11)
to
Maximum Axial Groove Diameter
  • 393.661 (11)
to
Cutting Direction
  • B (4)
  • E (12)
  • S (14)
Rake Angle Style
  • DOUBLE NEGATIVE (20)
  • NEGATIVE-ZERO (2)
  • NEUTRAL (ZERO) (8)
Maximum Bore Depth
  • 70.0 (21)
to
Maximum Bore Depth
  • 2.756 (21)
to
frontEnd
Clamp Style
  • M (24)
  • N (12)
  • P (6)
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (12)
  • R-ROUND (6)
  • S-SQUARE 90 (10)
  • TN-TOP NOTCH (12)
  • V-DIAMOND/RHOMBIC 35 (2)
Cutting Width
  • 1.0 (4)
  • 1.19 (2)
  • 1.194 (4)
  • 1.2 (4)
  • 1.5 (4)
  • 1.57 (4)
  • 1.575 (4)
  • 1.75 (4)
  • 1.829 (4)
  • 1.981 (4)
  • 2.0 (4)
  • 2.2 (4)
  • 2.235 (4)
  • 2.24 (2)
  • 2.25 (2)
  • 2.388 (4)
  • 2.39 (2)
  • 2.464 (4)
  • 2.5 (4)
  • 2.667 (4)
  • 2.743 (4)
  • 2.75 (4)
  • 2.794 (4)
  • 2.997 (4)
  • 3.0 (8)
  • 3.099 (4)
  • 3.17 (4)
  • 3.175 (8)
  • 3.18 (2)
  • 3.2 (8)
  • 3.25 (4)
  • 3.251 (4)
  • 3.32 (2)
  • 3.329 (2)
  • 3.5 (8)
  • 3.607 (4)
  • 3.96 (4)
  • 3.962 (4)
  • 3.974 (2)
  • 3.988 (4)
  • 4.0 (8)
  • 4.24 (2)
  • 4.242 (8)
  • 4.25 (2)
  • 4.3 (4)
  • 4.5 (8)
  • 4.521 (4)
  • 4.699 (6)
  • 4.775 (8)
  • 4.78 (2)
  • 4.785 (2)
  • 4.788 (2)
  • 4.8 (4)
  • 4.801 (8)
  • 4.81 (4)
  • 4.88 (2)
  • 4.95 (4)
  • 5.0 (4)
  • 5.004 (6)
  • 5.131 (4)
  • 5.41 (4)
  • 5.5 (4)
  • 5.537 (2)
  • 5.563 (4)
  • 6.0 (6)
  • 6.35 (8)
  • 6.36 (2)
  • 6.48 (4)
  • 7.01 (2)
  • 7.137 (4)
  • 7.925 (4)
  • 8.001 (1)
  • 8.738 (2)
  • 8.992 (2)
  • 9.525 (4)
  • 9.65 (2)
  • 9.73 (2)
to
Cutting Width
  • 0.0394 (4)
  • 0.047 (4)
  • 0.0472 (4)
  • 0.0591 (4)
  • 0.062 (4)
  • 0.0689 (4)
  • 0.072 (4)
  • 0.078 (4)
  • 0.0787 (4)
  • 0.079 (2)
  • 0.0866 (4)
  • 0.088 (4)
  • 0.0886 (2)
  • 0.094 (4)
  • 0.097 (4)
  • 0.0984 (4)
  • 0.105 (4)
  • 0.108 (4)
  • 0.1083 (4)
  • 0.11 (4)
  • 0.118 (4)
  • 0.1181 (8)
  • 0.122 (4)
  • 0.125 (8)
  • 0.126 (8)
  • 0.128 (4)
  • 0.131 (2)
  • 0.1378 (8)
  • 0.142 (4)
  • 0.156 (4)
  • 0.157 (4)
  • 0.1574 (8)
  • 0.1575 (8)
  • 0.167 (8)
  • 0.1673 (2)
  • 0.169 (4)
  • 0.1771 (8)
  • 0.1772 (8)
  • 0.178 (4)
  • 0.185 (6)
  • 0.188 (8)
  • 0.189 (8)
  • 0.192 (2)
  • 0.195 (4)
  • 0.1969 (4)
  • 0.197 (6)
  • 0.202 (4)
  • 0.213 (4)
  • 0.2165 (4)
  • 0.2166 (2)
  • 0.218 (2)
  • 0.219 (4)
  • 0.2362 (6)
  • 0.25 (8)
  • 0.255 (4)
  • 0.276 (2)
  • 0.281 (4)
  • 0.312 (4)
  • 0.315 (1)
  • 0.344 (2)
  • 0.354 (2)
  • 0.375 (4)
  • 0.38 (2)
  • 0.383 (2)
to
Insert Size
  • 3 (4)
  • 4 (4)
  • 5 (2)
  • 6 (2)
insertGeometry
Cutting Tool Material
  • B H (10)
  • B L (6)
  • C A (15)
  • C N (21)
  • D P (8)
  • H T (12)
  • H W (42)
backEnd
Connection Type
  • TAPER SHANK (30)
System Size
  • KM80ATC (30)
Back-End Diameter
  • 3.1496 (40)
  • 3.15 (2)
to
Back-End Diameter
  • 80.0 (42)
to
other
Platform
  • KM80 (38)
Tool Unit
  • I (30)
  • M (42)
Over All Length [L]
  • 70.0 (40)
  • 80.0 (2)
to
Over All Length [L]
  • 2.7559 (19)
  • 2.756 (21)
  • 3.1496 (2)
to
Insert Hand
  • L (6)
  • N (30)
  • R (6)
Cutting Condition Material
  • H-All (22)
  • K-All (40)
  • M-All (32)
  • N-All (27)
  • P-All (40)
  • S-All (32)
  • S2 (8)
  • S4 (2)
No filters matching ""
View Products in
Metric
Inch
Unidades de corte KM80ATC™

Fijación M
(4 Products)
  • Mango —  KM-ATCMango — KM-ATC
  • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
  • Refrigeración —  Con refrigeración interna  100 bar (1500 psi)  máximoRefrigeración — Con refrigeración interna 100 bar (1500 psi) máximo
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
1961291 KM80ATCMCKNL19 KM80ATCMCKNL19 70.0000 2.756 53.0000 2.086 106.0000 4.173 CN..190612/CN..643 2.41 5.30
    List price:
    $525.75 /each.
    Your price::
    Qty
    3684524 KM80ATCMCKNL25 KM80ATCMCKNL25 70.0000 2.756 53.0000 2.086 106.0000 4.173 CN..250924/CN..866 2.54 5.61
      List price:
      $525.23 /each.
      Your price::
      Qty
      2036393 KM80ATCMCKNR19 KM80ATCMCKNR19 70.0000 2.756 53.0000 2.086 106.0000 4.173 CN..190612/CN..643 2.40 5.30
        List price:
        $525.75 /each.
        Your price::
        Qty
        3758113 KM80ATCMCKNR25 KM80ATCMCKNR25 70.0000 2.755 53.0000 2.086 106.0000 4.173 CN..250924/CN..866 2.54 5.61
          Your price::
          Qty