successfully added to cart
View Cart
COVID-19: Como está respondiendo WIDIA

VSM17H

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (125)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (108)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (108)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (108)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (108)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (108)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (125)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (125)
  • M Stainless Steel (125)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (125)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (125)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (125)
  • K Cast Iron (100)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (100)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (97)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (97)
  • N Non-Ferrous Materials (96)
    • N1
      Wrought Aluminum
      (96)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (96)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (93)
  • S High-Temp Alloys (125)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (116)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (116)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (116)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (125)
  • H Hardened Materials (83)
    • H1
      Hardened Materials 44-48 HRC
      (83)
Select First Choice
  • CN (55)
  • DE (100)
  • IN (5)
  • US (23)
Applications
  • Chamfer Milling Chamfer Milling (67)
  • Drilling Drilling (67)
  • Face Milling Face Milling (67)
  • Flat Bottom Drilling Flat Bottom Drilling (67)
  • ID Thread Turning ID Thread Turning (76)
  • Pipe Thread Pipe Thread (67)
  • Pocket Pocket (67)
  • Pocket Helical Pocket Helical (67)
  • Pocket Milling Pocket Milling (67)
  • Pocket Plunge Milling Pocket Plunge Milling (67)
  • Profile Milling Profile Milling (67)
  • Ramping Ramping (67)
  • Shoulder Ball Nose Shoulder Ball Nose (67)
  • Shoulder Bottom Shoulder Shoulder Bottom Shoulder (67)
  • Shoulder Milling Shoulder Milling (67)
  • Shoulder Roughing Shoulder Roughing (67)
  • Shoulder Square End Shoulder Square End (67)
  • Slot Ball Nose Slot Ball Nose (67)
  • Slot Milling Slot Milling (67)
  • Slot Side Slot Side (67)
  • Slot Square End Slot Square End (67)
  • Slot T Slot T (67)
  • Thread Milling Thread Milling (67)
  • Threading Threading (67)
Cutting Diameter
  • 25.0 (4)
  • 25.4 (4)
  • 31.7 (6)
  • 31.75 (2)
  • 32.0 (8)
  • 38.1 (9)
  • 40.0 (9)
  • 50.0 (3)
  • 50.8 (6)
  • 63.0 (2)
  • 63.5 (4)
  • 76.2 (2)
  • 80.0 (2)
  • 100.0 (1)
  • 101.6 (1)
  • 125.0 (1)
  • 127.0 (1)
  • 152.4 (1)
  • 160.0 (1)
to
Cutting Diameter
  • 0.984 (4)
  • 1.0 (4)
  • 1.25 (8)
  • 1.26 (8)
  • 1.5 (9)
  • 1.575 (9)
  • 1.968 (3)
  • 2.0 (6)
  • 2.48 (2)
  • 2.5 (4)
  • 3.0 (2)
  • 3.15 (2)
  • 3.937 (1)
  • 4.0 (1)
  • 4.921 (1)
  • 5.0 (1)
  • 6.0 (1)
  • 6.299 (1)
to
Cutting Length
  • 0.616 (1)
  • 0.617 (2)
  • 0.621 (1)
  • 0.623 (2)
  • 0.626 (4)
  • 0.629 (4)
  • 0.635 (6)
  • 0.638 (18)
  • 0.641 (16)
  • 0.642 (4)
  • 0.647 (4)
  • 2.38 (1)
  • 2.954 (2)
  • 4.12 (2)
to
Cutting Length
  • 15.6 (1)
  • 15.7 (2)
  • 15.8 (3)
  • 15.9 (4)
  • 16.0 (4)
  • 16.1 (6)
  • 16.2 (18)
  • 16.3 (20)
  • 16.4 (4)
  • 60.4 (1)
  • 75.0 (2)
  • 104.6 (2)
to
Reach
  • 30.99 (1)
  • 31.7 (1)
  • 33.0 (1)
  • 35.0 (1)
  • 38.1 (4)
  • 39.0 (4)
  • 40.0 (4)
  • 43.69 (2)
  • 44.0 (2)
  • 44.4 (2)
  • 45.97 (2)
  • 50.0 (8)
  • 50.8 (8)
to
Reach
  • 1.22 (1)
  • 1.25 (1)
  • 1.298 (1)
  • 1.378 (1)
  • 1.5 (4)
  • 1.535 (4)
  • 1.575 (4)
  • 1.72 (2)
  • 1.732 (2)
  • 1.75 (2)
  • 1.81 (2)
  • 1.969 (8)
  • 2.0 (8)
to
Tool Cutting Edge Angle
  • 90.0 (67)
to
Connection Style
  • A-Socket Head Cap Screw (26)
  • SHCS or RetScrw Or BoltCircle (1)
  • Screw-On Connection (10)
  • Straight-Cylindrical (20)
  • Weldon (10)
Cutting Edges Per Insert
  • 2.0 (143)
to
Internal Coolant Capability
cornerConfiguration
Corner Radius
  • 0.4 (72)
  • 0.8 (84)
  • 1.2 (83)
  • 1.6 (75)
  • 2.0 (74)
  • 2.4 (73)
  • 3.2 (74)
  • 4.0 (73)
  • 6.0 (71)
to
Corner Radius
  • 0.016 (72)
  • 0.031 (84)
  • 0.047 (83)
  • 0.062 (69)
  • 0.063 (73)
  • 0.079 (74)
  • 0.094 (73)
  • 0.125 (74)
  • 0.157 (73)
  • 0.235 (71)
to
application
Grade Of Cutting Tool
  • WK15CM (72)
  • WK15PM (68)
  • WN10HM (70)
  • WN25PM (76)
  • WP25PM (82)
  • WP35CM (76)
  • WP40PM (80)
  • WS30PM (68)
  • WS40PM (84)
  • WU35PM (70)
Hand Of Tool
  • R (67)
Wiper Insert
  • N (76)
Maximum Ramp Angle
  • 0.7 (2)
  • 0.9 (2)
  • 1.2 (2)
  • 1.6 (2)
  • 1.7 (2)
  • 2.1 (6)
  • 3.0 (9)
  • 4.0 (9)
  • 4.3 (9)
  • 5.7 (8)
  • 5.8 (8)
  • 8.5 (4)
  • 8.8 (4)
to
frontEnd
Insert Shape
  • X-PARALLELOGRAM 75 (143)
Center Cutting
insertGeometry
Shape
  • X-PARALLELOGRAM 75 (76)
Cutting Edge Length
  • 0.616 (4)
  • 0.642 (6)
  • 0.652 (7)
  • 0.658 (59)
to
Cutting Edge Length
  • 15.64 (4)
  • 16.3 (6)
  • 16.55 (7)
  • 16.7 (5)
  • 16.71 (44)
  • 16.72 (10)
to
Cutting Tool Material
  • H W (76)
Chip Breaker CBMD
  • ALP (12)
  • MH (8)
  • ML (22)
  • MM (34)
Tolerance Class
  • C (34)
  • P (42)
backEnd
Connection Type
  • CYLINDRICAL (31)
  • SCREW-ON (9)
  • SHELL MILL (27)
Back-End Diameter
  • 0.63 (1)
  • 0.75 (6)
  • 0.827 (2)
  • 0.867 (5)
  • 0.984 (3)
  • 1.0 (8)
  • 1.063 (1)
  • 1.096 (1)
  • 1.142 (8)
  • 1.25 (8)
  • 1.26 (11)
  • 1.5 (9)
  • 1.574 (2)
  • 1.575 (2)
to
Back-End Diameter
  • 16.0 (1)
  • 19.1 (6)
  • 21.0 (2)
  • 22.0 (5)
  • 25.0 (3)
  • 25.4 (8)
  • 27.0 (2)
  • 29.0 (8)
  • 31.7 (3)
  • 31.75 (3)
  • 31.8 (2)
  • 32.0 (11)
  • 38.1 (9)
  • 40.0 (4)
to
other
Grade
  • WK15CM (5)
  • WK15PM (1)
  • WN10HM (3)
  • WN25PM (9)
  • WP25PM (15)
  • WP35CM (9)
  • WP40PM (13)
  • WS30PM (1)
  • WS40PM (17)
  • WU35PM (3)
Platform
  • VSM17 (137)
Tool Unit
  • I (112)
  • M (107)
Over All Length [L]
  • 40.0 (12)
  • 44.5 (2)
  • 50.0 (3)
  • 50.8 (3)
  • 53.7 (1)
  • 57.0 (1)
  • 62.6 (4)
  • 63.0 (2)
  • 64.5 (4)
  • 88.9 (2)
  • 90.0 (1)
  • 100.0 (2)
  • 101.6 (2)
  • 110.0 (3)
  • 114.3 (5)
  • 120.0 (2)
  • 121.9 (2)
  • 130.0 (2)
  • 132.1 (2)
  • 139.7 (2)
  • 170.0 (1)
  • 170.2 (1)
  • 203.2 (2)
  • 210.0 (2)
  • 248.9 (2)
  • 250.0 (2)
to
Over All Length [L]
  • 1.575 (12)
  • 1.75 (2)
  • 1.969 (3)
  • 2.0 (3)
  • 2.116 (1)
  • 2.244 (1)
  • 2.465 (4)
  • 2.48 (2)
  • 2.539 (4)
  • 3.5 (2)
  • 3.543 (1)
  • 3.937 (2)
  • 4.0 (2)
  • 4.331 (3)
  • 4.5 (5)
  • 4.724 (2)
  • 4.8 (2)
  • 5.118 (2)
  • 5.2 (2)
  • 5.5 (2)
  • 6.693 (1)
  • 6.7 (1)
  • 8.0 (2)
  • 8.268 (2)
  • 9.8 (2)
  • 9.843 (2)
to
Head Length [L2]
  • 30.99 (1)
  • 31.7 (1)
  • 33.0 (1)
  • 35.0 (1)
  • 38.1 (4)
  • 39.0 (4)
  • 40.0 (4)
  • 43.69 (2)
  • 44.0 (2)
  • 44.4 (2)
  • 45.97 (2)
  • 50.0 (8)
  • 50.8 (8)
to
Head Length [L2]
  • 1.22 (1)
  • 1.25 (1)
  • 1.298 (1)
  • 1.378 (1)
  • 1.5 (4)
  • 1.535 (4)
  • 1.575 (4)
  • 1.72 (2)
  • 1.732 (2)
  • 1.75 (2)
  • 1.81 (2)
  • 1.969 (8)
  • 2.0 (8)
to
Insert Hand
  • R (76)
obsoleteFacet
  • true (143)
  • false (137)
Number of Inserts
  • 2.0 (16)
  • 3.0 (16)
  • 4.0 (12)
  • 5.0 (4)
  • 6.0 (6)
  • 7.0 (2)
  • 8.0 (2)
  • 9.0 (2)
  • 12.0 (2)
  • 16.0 (1)
  • 20.0 (1)
  • 25.0 (1)
  • 28.0 (1)
  • 35.0 (1)
to
No filters matching ""
View Products in
Metric
Inch
Fresas de escuadrado de 0°/90° • VSM17™

Fresas de mango cilíndricas (versión normal y larga) • Sistema métrico
(10 Products)
  • PlaneadoPlaneado
  • Fresado helicoidalFresado helicoidal
  • Rectificado en rampa: Material en brutoRectificado en rampa: Material en bruto
  • Ranurado: Placa cuadradaRanurado: Placa cuadrada
  • Fresado lateral/Fresado en escuadra: Placa cuadradaFresado lateral/Fresado en escuadra: Placa cuadrada
  • Mecanizado de alojamientosMecanizado de alojamientos
  • Fresado —  Con refrigeración internaFresado — Con refrigeración interna
  • Mango —  Liso  cilíndricoMango — Liso cilíndrico
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Kilograms
5988055 VSM17D025Z02A25XD17L110 VSM17D025Z02A25XD17L110   25.0000 .9840 25.0 .984 110.0000 4.331 44.0000 1.732 16.4000 .6470 2 8.800 41800 Y 0.32
    5988056 VSM17D025Z02A25XD17L170 VSM17D025Z02A25XD17L170   25.0000 .9840 25.0 .984 170.0000 6.693 44.0000 1.732 16.4000 .6470 2 8.800 41800 Y 0.54
      5988107 VSM17D032Z02A32XD17L120 VSM17D032Z02A32XD17L120   32.0000 1.260 32.0 1.26 120.0000 4.724 50.0000 1.969 16.3000 .6410 2 5.700 34700 Y 0.60
        5988108 VSM17D032Z02A32XD17L210 VSM17D032Z02A32XD17L210   32.0000 1.260 32.0 1.26 210.0000 8.268 50.0000 1.969 16.3000 .6410 2 5.700 34700 Y 1.14
          5988057 VSM17D032Z03A32XD17L120 VSM17D032Z03A32XD17L120   32.0000 1.260 32.0 1.26 120.0000 4.724 50.0000 1.969 16.3000 .6410 3 5.700 34700 Y 0.60
            5988058 VSM17D032Z03A32XD17L210 VSM17D032Z03A32XD17L210   32.0000 1.260 32.0 1.26 210.0000 8.268 50.0000 1.969 16.3000 .6410 3 5.700 34700 Y 1.13
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Qty
              Fresas de escuadrado de 0°/90° • VSM17™

              Fresas de mango Weldon® • Sistema métrico
              (5 Products)
              • PlaneadoPlaneado
              • Fresado helicoidalFresado helicoidal
              • Rectificado en rampa: Material en brutoRectificado en rampa: Material en bruto
              • Ranurado: Placa cuadradaRanurado: Placa cuadrada
              • Fresado lateral/Fresado en escuadra: Placa cuadradaFresado lateral/Fresado en escuadra: Placa cuadrada
              • Mecanizado de alojamientosMecanizado de alojamientos
              • Fresado —  Con refrigeración internaFresado — Con refrigeración interna
              • Mango —  Weldon cilíndricoMango — Weldon cilíndrico
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Kilograms
              5988102 VSM17D025Z02B25XD17 VSM17D025Z02B25XD17   25.0000 .9840 25.0 .984 90.0000 3.543 33.0000 1.298 16.4000 .6470 2 8.800 41800 Y 0.26
                5988103 VSM17D032Z03B32XD17 VSM17D032Z03B32XD17   32.0000 1.260 32.0 1.26 100.0000 3.937 39.0000 1.535 16.3000 .6410 3 5.700 34700 Y 0.48
                  5988104 VSM17D040Z04B40XD17 VSM17D040Z04B40XD17   40.0000 1.575 40.0 1.574 110.0000 4.331 39.0000 1.535 16.2000 .6380 4 4.000 29800 Y 0.87
                    5988136 VSM17D032Z02B32XD17 VSM17D032Z02B32XD17   32.0000 1.260 32.0 1.26 100.0000 3.937 39.0000 1.535 16.3000 .6410 2 5.700 34700 Y 0.49
                      5988137 VSM17D040Z03B40XD17 VSM17D040Z03B40XD17   40.0000 1.575 40.0 1.574 110.0000 4.331 39.0000 1.535 16.2000 .6380 3 4.000 29800 Y 0.88
                        List price:
                        Discount: %
                        Your price::
                        Replacement This item is not available
                        Replacement Product This item may be available through a distributor
                        Qty
                        Fresas de escuadrado de 0°/90° • VSM17™

                        Fresas de mango Screw-On • Sistema métrico
                        (5 Products)
                        • PlaneadoPlaneado
                        • Fresado helicoidalFresado helicoidal
                        • Rectificado en rampa: Material en brutoRectificado en rampa: Material en bruto
                        • Ranurado: Placa cuadradaRanurado: Placa cuadrada
                        • Fresado lateral/Fresado en escuadra: Placa cuadradaFresado lateral/Fresado en escuadra: Placa cuadrada
                        • Mecanizado de alojamientosMecanizado de alojamientos
                        • Mango —  Screw-OnMango — Screw-On
                        • Fresado —  Con refrigeración internaFresado — Con refrigeración interna
                        View Products
                        SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [DPM] Pilot Diameter Machine Side [DPM] Pilot Diameter Machine Side [G3X] Connection Thread Size External [L2] Head Length [L2] Head Length [WF] Width of Flat [WF] Width of Flat [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Kilograms
                        5988091 VSM17D025Z02M12XD17 VSM17D025Z02M12XD17   25.0000 .9840 21.0 .827 12.5000 .4920 M12 35.0000 1.378 16.9500 .6670 16.4000 .6470 2 8.800 41800 Y 0.08
                          5988092 VSM17D032Z03M16XD17 VSM17D032Z03M16XD17   32.0000 1.260 29.0 1.142 17.0000 .6690 M16 40.0000 1.575 23.9500 .9430 16.3000 .6410 3 5.700 34700 Y 0.17
                            5988093 VSM17D040Z04M16XD17 VSM17D040Z04M16XD17   40.0000 1.575 29.0 1.142 17.0000 .6690 M16 40.0000 1.575 23.9500 .9430 16.2000 .6380 4 4.000 29800 Y 0.20
                              5988131 VSM17D40Z03M016XD17 VSM17D40Z03M016XD17   40.0000 1.575 29.0 1.142 17.0000 .6690 M16 40.0000 1.575 23.9500 .9430 16.2000 .6380 3 4.000 29800 Y 0.20
                                5988132 VSM17D32Z02M016XD17 VSM17D32Z02M016XD17   32.0000 1.260 29.0 1.142 17.0000 .6690 M16 40.0000 1.575 23.9500 .9430 16.3000 .6410 2 5.700 34700 Y 0.18
                                  List price:
                                  Discount: %
                                  Your price::
                                  Replacement This item is not available
                                  Replacement Product This item may be available through a distributor
                                  Qty
                                  Fresas de escuadrado de 0°/90° • VSM17™

                                  Fresas de plato • Sistema métrico
                                  (11 Products)
                                  • PlaneadoPlaneado
                                  • Fresado helicoidalFresado helicoidal
                                  • Rectificado en rampa: Material en brutoRectificado en rampa: Material en bruto
                                  • Ranurado: Placa cuadradaRanurado: Placa cuadrada
                                  • Fresado lateral/Fresado en escuadra: Placa cuadradaFresado lateral/Fresado en escuadra: Placa cuadrada
                                  • Mecanizado de alojamientosMecanizado de alojamientos
                                  • Fresado —  Con refrigeración internaFresado — Con refrigeración interna
                                  • Fresado —  lateral y planeadoFresado — lateral y planeado
                                  View Products
                                  SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D6] Hub Diameter [D6] Hub Diameter [L] Overall Length [L] Overall Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Kilograms
                                  5988094 VSM17D040Z04S16XD17 VSM17D040Z04S16XD17   40.0000 1.575 16.0 .63 37.0000 1.457 40.0000 1.575 16.2000 .6380 4 4.000 29800 Y 0.19
                                    5988095 VSM17D050Z04S22XD17 VSM17D050Z04S22XD17   50.0000 1.968 22.0 .867 45.0000 1.772 40.0000 1.575 16.1000 .6350 4 3.000 25800 Y 0.28
                                      5988096 VSM17D050Z05S22XD17 VSM17D050Z05S22XD17   50.0000 1.968 22.0 .867 45.0000 1.772 40.0000 1.575 16.1000 .6350 5 3.000 25800 Y 0.29
                                        5988134 VSM17D050Z06S22XD17 VSM17D050Z06S22XD17   50.0000 1.968 22.0 .867 45.0000 1.772 40.0000 1.575 16.1000 .6350 6 3.000 25800 Y 0.28
                                          5988097 VSM17D063Z05S22XD17 VSM17D063Z05S22XD17   63.0000 2.480 22.0 .867 50.0000 1.969 40.0000 1.575 16.0000 .6290 5 2.100 22400 Y 0.45
                                            5988135 VSM17D063Z06S22XD17 VSM17D063Z06S22XD17   63.0000 2.480 22.0 .867 50.0000 1.969 40.0000 1.575 16.0000 .6290 6 2.100 22400 Y 0.45
                                              List price:
                                              Discount: %
                                              Your price::
                                              Replacement This item is not available
                                              Replacement Product This item may be available through a distributor
                                              Qty
                                              0°/90° Shoulder Mills • VSM17™

                                              Cylindrical End Mills (Regular and Long Version) • Inch
                                              (10 Products)
                                              • PlaneadoPlaneado
                                              • Fresado helicoidalFresado helicoidal
                                              • Rectificado en rampa: Material en brutoRectificado en rampa: Material en bruto
                                              • Ranurado: Placa cuadradaRanurado: Placa cuadrada
                                              • Fresado lateral/Fresado en escuadra: Placa cuadradaFresado lateral/Fresado en escuadra: Placa cuadrada
                                              • Mecanizado de alojamientosMecanizado de alojamientos
                                              • 3710037100
                                              • Fresado —  Con refrigeración internaFresado — Con refrigeración interna
                                              View Products
                                              SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Pounds
                                              5988011 VSM17D100Z02C100XD17L450 VSM17D100Z02C100XD17L450   25.4000 1.000 25.4 1.0 114.3000 4.500 44.4000 1.750 16.3000 .6420 2 8.500 41300 Y 0.78
                                                5988012 VSM17D100Z02C100XD17L670 VSM17D100Z02C100XD17L670   25.4000 1.000 25.4 1.0 170.2000 6.700 44.4000 1.750 16.3000 .6420 2 8.500 41300 Y 1.23
                                                  5988014 VSM17D125Z03C125XD17L800 VSM17D125Z03C125XD17L800   31.7000 1.250 31.7 1.25 203.2000 8.000 50.8000 2.000 16.3000 .6410 3 5.800 34700 Y 2.36
                                                    5988041 VSM17D125Z02C125XD17L480 VSM17D125Z02C125XD17L480   31.7500 1.250 31.75 1.25 121.9000 4.800 50.8000 2.000 16.3000 .6410 2 5.800 34700 Y 1.32
                                                      5988042 VSM17D125Z02C125XD17L800 VSM17D125Z02C125XD17L800   31.7500 1.250 31.75 1.25 203.2000 8.000 50.8000 2.000 16.3000 .6410 2 5.800 34700 Y 2.38
                                                        5988013 VSM17D125Z03C125XD17L480 VSM17D125Z03C125XD17L480   31.7000 1.250 31.7 1.25 121.9000 4.800 50.8000 2.000 16.3000 .6410 3 5.800 34700 Y 1.31
                                                          List price:
                                                          Discount: %
                                                          Your price::
                                                          Replacement This item is not available
                                                          Replacement Product This item may be available through a distributor
                                                          Qty
                                                          0°/90° Shoulder Mills • VSM17™

                                                          Weldon® End Mills • Inch
                                                          (5 Products)
                                                          • PlaneadoPlaneado
                                                          • Fresado helicoidalFresado helicoidal
                                                          • Rectificado en rampa: Material en brutoRectificado en rampa: Material en bruto
                                                          • Ranurado: Placa cuadradaRanurado: Placa cuadrada
                                                          • Fresado lateral/Fresado en escuadra: Placa cuadradaFresado lateral/Fresado en escuadra: Placa cuadrada
                                                          • Mecanizado de alojamientosMecanizado de alojamientos
                                                          • 3710437104
                                                          • Fresado —  Con refrigeración internaFresado — Con refrigeración interna
                                                          View Products
                                                          SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Pounds
                                                          5988028 VSM17D100Z02W100XD17 VSM17D100Z02W100XD17   25.4000 1.000 25.4 1.0 88.9000 3.500 30.9900 1.220 16.3000 .6420 2 8.500 41300 Y 0.59
                                                            5988029 VSM17D125Z03W125XD17 VSM17D125Z03W125XD17   31.7000 1.250 31.7 1.25 101.6000 4.000 43.6900 1.720 16.3000 .6410 3 5.800 34700 Y 1.05
                                                              5988052 VSM17D125Z02W125XD17 VSM17D125Z02W125XD17   31.7000 1.250 31.75 1.25 101.6000 4.000 43.6900 1.720 16.3000 .6410 2 5.800 34700 Y 1.06
                                                                5988051 VSM17D150Z03W150XD17 VSM17D150Z03W150XD17   38.1000 1.500 38.1 1.5 114.3000 4.500 45.9700 1.810 16.2000 .6380 3 4.300 30700 Y 1.77
                                                                  5988030 VSM17D150Z04W150XD17 VSM17D150Z04W150XD17   38.1000 1.500 38.1 1.5 114.3000 4.500 45.9700 1.810 16.2000 .6380 4 4.300 30700 Y 1.77
                                                                    List price:
                                                                    Discount: %
                                                                    Your price::
                                                                    Replacement This item is not available
                                                                    Replacement Product This item may be available through a distributor
                                                                    Qty
                                                                    0°/90° Shoulder Mills • VSM17™

                                                                    Shell Mills • Inch
                                                                    (11 Products)
                                                                    • PlaneadoPlaneado
                                                                    • Fresado helicoidalFresado helicoidal
                                                                    • Rectificado en rampa: Material en brutoRectificado en rampa: Material en bruto
                                                                    • Ranurado: Placa cuadradaRanurado: Placa cuadrada
                                                                    • Fresado lateral/Fresado en escuadra: Placa cuadradaFresado lateral/Fresado en escuadra: Placa cuadrada
                                                                    • Mecanizado de alojamientosMecanizado de alojamientos
                                                                    • 3829538295
                                                                    • Fresado —  Con refrigeración internaFresado — Con refrigeración interna
                                                                    View Products
                                                                    SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D6] Hub Diameter [D6] Hub Diameter [L] Overall Length [L] Overall Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Pounds
                                                                    5988021 VSM17D200Z04S075XD17 VSM17D200Z04S075XD17   50.8000 2.000 19.1 .75 44.4000 1.750 40.0000 1.575 16.1000 .6350 4 3.000 25600 Y 0.68
                                                                      5988022 VSM17D200Z05S075XD17 VSM17D200Z05S075XD17   50.8000 2.000 19.1 .75 44.4000 1.750 40.0000 1.575 16.1000 .6350 5 3.000 25600 Y 0.71
                                                                        5988024 VSM17D300Z06S100XD17 VSM17D300Z06S100XD17   76.2000 3.000 25.4 1.0 55.6000 2.188 44.5000 1.750 15.9000 .6260 6 1.700 20100 Y 1.73
                                                                          5988020 VSM17D150Z04S075XD17 VSM17D150Z04S075XD17   38.1000 1.500 19.1 .75 36.0000 1.417 40.0000 1.575 16.2000 .6380 4 4.300 30700 Y 0.38
                                                                            5988050 VSM17D200Z06S075XD17 VSM17D200Z06S075XD17   50.8000 2.000 19.1 .75 44.4000 1.750 40.0000 1.575 16.1000 .6350 6 3.000 25600 Y 0.66
                                                                              5988023 VSM17D250Z05S075XD17 VSM17D250Z05S075XD17   63.5000 2.500 19.1 .75 44.4000 1.750 40.0000 1.575 16.0000 .6290 5 2.100 22300 Y 0.98
                                                                                List price:
                                                                                Discount: %
                                                                                Your price::
                                                                                Replacement This item is not available
                                                                                Replacement Product This item may be available through a distributor
                                                                                Qty
                                                                                Fresas de escuadrado de 0°/90° • VSM17™

                                                                                Plaquitas • XDCT-ML
                                                                                (22 Products)
                                                                                View Products
                                                                                SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade Cutting Edges per Insert [LI] Insert Length [LI] Insert Length [BS] Corner Facet Length [BS] Corner Facet Length [S] Insert Thickness [S] Insert Thickness [W] Insert Width [W] Insert Width [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM]
                                                                                5989010 XDCT170404PEERML XDCT1701ERML   WP25PM 2 19.1500 .7540 2.6200 .1030 4.9000 .1930 9.6000 .3780 0.4000 .0160