M270 Ball Nose • Carbide Cylindrical Shank
Ball Nose Tool Bodies
Features and benefits
- Rough, semi-finishing, and finishing with one system.
- Through tool coolant.
- Carbide shank to improve rigidity.
Uses and application
Mango — Liso cilíndrico
Perfilado 3D
Fresado lateral/Fresado en escuadra: Nariz de bola
Ranurado: Nariz de bola
Rectificado en rampa: Material en bruto
Mecanizado de alojamientos
Fresado — Con refrigeración interna
Filters and Columns
Filters
Filters
View filters in
Metric
Inch
Material de la pieza de trabajo
Material de la pieza de trabajo
-
P Acero (4)
-
P0Aceros con bajo contenido de carbono, virutas largas C < 0,25 %; <125 HB; <530 N/mm^2 UTS (4)
-
P1Aceros con bajo contenido de carbono, virutas cortas C < 0,25 %; <125 HB; <530 N/mm^2 UTS (4)
-
P2Aceros al carbono medios y altos C < 0,25 %; <220 HB; <25 HRC; >530 N/mm^2 UTS (4)
-
P3Aceros aleados y aceros para herramientas C > 0,25 %; <330 HB; <35 HRC; entre 600 y 850 N/mm^2 UTS (4)
-
P4Aceros aleados y aceros para herramientas C > 0,25 %; entre 350 y 420 HB; entre 35 y 43 HRC; entre 850 y 1400 N/mm^2 UTS (4)
-
P5Aceros ferríticos, martensíticos e inoxidables PH <330 HB; <35 HRC; entre 600 y 900 N/mm^2 UTS (4)
-
P6Aceros ferríticos, martensíticos e inoxidables PH de alta resistencia Entre 350 y 450 HB; entre 35 y 43 HRC; entre 900 y 2400 N/mm^2 UTS (4)
-
-
M Acero inoxidable (4)
-
M1Acero inoxidable austenítico Entre 130 y 200 HB; <600 N/mm^2 UTS (4)
-
M2Aceros inoxidables fundidos e inoxidables austeníticos de alta resistencia Entre 150 y 230 HB; <25 HRC; <600 N/mm^2 UTS (4)
-
M3Acero inoxidable dúplex Entre 135 y 275 HB; <30 HRC; entre 500 y 1200 N/mm^2 UTS (4)
-
-
K Fundición (4)
-
K1Fundición gris Entre 120 y 290 HB; <32 HRC; entre 125 y 500 N/mm^2 UTS (4)
-
K2Fundiciones dúctiles y CGI de baja y media resistencia Entre 130 y 260 HB; <28 HRC; <600 N/mm^2 UTS (4)
-
K3Fundición austenítica y dúctil de alta resistencia Entre 180 y 350 HB; <43 HRC; >600 N/mm^2 UTS (4)
-
-
N Materiales no ferrosos (4)
-
N1Aluminio forjado (4)
-
N2Aleaciones de aluminio bajo en silicio y aleaciones de magnesio Si <12,2 % (4)
-
N3Aleaciones de aluminio con alto contenido en silicio Si >12,2 % (4)
-
-
S Aleaciones de alta temperatura (4)
-
S1Aleaciones basadas en hierro, resistentes al calor Entre 160 y 260 HB; entre 25 y 48 HRC; entre 500 y 1200 N/mm^2 UTS (4)
-
S2Aleaciones basadas en cobalto, resistentes al calor Entre 250 y 450 HB; entre 25 y 48 HRC; entre 1000 y 1450 N/mm^2 UTS (4)
-
S3Aleaciones basadas en níquel, resistentes al calor Entre 160 y 450 HB; <48 HRC; entre 600 y 1700 N/mm^2 UTS (4)
-
S4Titanio y aleaciones de titanio Entre 300 y 450 HB; entre 33 y 43 HRC; entre 900 y 1600 N/mm^2 UTS (4)
-
-
H Materiales endurecidos (4)
-
H1Materiales endurecidos 44-48 HRC (4)
-
H2Materiales endurecidos 48-55 HRC (4)
-
H3Materiales endurecidos 56-60 HRC (4)
-
Select All Star
-
US (1)
Aplicaciones
Aplicaciones
-
Pocket (4)
-
Pocket Milling (4)
-
Profile Milling (4)
-
Ramping (4)
-
Shoulder Ball Nose (4)
-
Shoulder Milling (4)
-
Slot Ball Nose (4)
-
Slot Milling (4)
Diámetro del corte
Diámetro del corte
-
0.375 in (1)
-
0.5 in (1)
-
0.625 in (1)
-
0.75 in (1)
to
Diámetro del corte
Diámetro del corte
-
9.525 mm (1)
-
12.701 mm (1)
-
15.875 mm (1)
-
19.05 mm (1)
to
Alcance
Alcance
-
1.8 in (1)
-
2.0 in (1)
-
2.301 in (1)
-
2.801 in (1)
to
Alcance
Alcance
-
45.725 mm (1)
-
50.801 mm (1)
-
58.426 mm (1)
-
71.125 mm (1)
to
Longitud total [L]
Longitud total [L]
-
5.55 in (1)
-
5.75 in (1)
-
6.0 in (1)
-
7.0 in (1)
to
Longitud total [L]
Longitud total [L]
-
140.975 mm (1)
-
146.05 mm (1)
-
152.4 mm (1)
-
177.8 mm (1)
to
Radio de esquina
Radio de esquina
-
0.187 in (1)
-
0.197 in (1)
-
0.237 in (1)
-
0.25 in (1)
-
0.313 in (1)
-
0.315 in (1)
-
0.375 in (1)
-
0.394 in (1)
to
Radio de esquina
Radio de esquina
-
4.75 mm (1)
-
5.0 mm (1)
-
6.0 mm (1)
-
6.351 mm (1)
-
7.95 mm (1)
-
8.0 mm (1)
-
9.525 mm (1)
-
10.0 mm (1)
to
application
Calidad de herramienta de corte
Calidad de herramienta de corte
-
THM (4)
-
TN2505 (4)
-
TN2510 (4)
-
TN6525 (4)
-
TN6540 (4)
-
TN7525 (4)
-
TN7535 (4)
-
TTI25 (4)
-
TTM (4)
-
TTM08 (2)
-
TTM09 (4)
-
WP35CM (4)
-
WU10PM (4)
backEnd
Diámetro de extremo posterior
Diámetro de extremo posterior
-
12.701 mm (2)
-
15.875 mm (1)
-
19.05 mm (1)
to
Diámetro de extremo posterior
Diámetro de extremo posterior
-
0.5 in (2)
-
0.625 in (1)
-
0.75 in (1)
to
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying
1-
4
of
4 results
Metric
Inch
Show
Metric
Inch
| Número de material SAP | Número de catálogo ISO | Número de catálogo ANSI | Calidad | First Choice | Adaptador/Mango/Diá int [D] | Adaptador/Mango/Diá int [D] | Calibre de plaquita | Diámetro de corte efectivo [D1] | Diámetro de corte efectivo [D1] | Longitud total [L] | Longitud total [L] | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 2639253 | M270BD037C050L555C | M270BD037C050L555C | W | 12.7 | .5 | M270B.0375 | 9.525 | .375 | 140.97 | 5.55 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$568.88
/each
Your price::
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 2639254 | M270BD050C050L575C | M270BD050C050L575C | W | 12.7 | .5 | M270B.05 | 12.7 | .5 | 146.05 | 5.75 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$615.75
/each
Your price::
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 2639255 | M270BD062C062L600C | M270BD062C062L600C | W | 15.875 | .625 | M270B.0625 | 15.875 | .625 | 152.4 | 6 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$769.67
/each
Your price::
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 2639256 | M270BD075C075L700C | M270BD075C075L700C | W | 19.05 | .75 | M270B.075 | 19.05 | .75 | 177.8 | 7 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$883.47
/each
Your price::
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
List price:
Discount: %
Replacement
This item is no longer available
Replacement Product Please contact customer service for assistance
Replacement Product Please contact customer service for assistance
Qty
Sold in pkg. of
| Light
|
General
|
Heavy
|
||||
| Material
|
Geometry | Grade | Geometry | Grade | Geometry | Grade |
| P1–P2 | BF | TN2505 | BR | WP35CM | BR | WP35CM |
| P3–P4 | BF | TN2505 | BR | WP35CM | BR | WP35CM |
| P5–P6 | BF | TN2505 | BR | WP35CM | BR | WP35CM |
| M1–M2 | BR | WP35CM | BR | WP35CM | BR | WP35CM |
| M3 | BR | WP35CM | BR | WP35CM | BR | WP35CM |
| K1–K2 | BF | TN2505 | BF | WU10PM | BF | WU10PM |
| K3 | BF | TN2505 | BF | WU10PM | BF | WU10PM |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | – | – | – | – | – | – |
| S3 | – | – | – | – | – | – |
| S4 | – | – | – | – | – | – |
| H1 | BF | TN2505 | BF | TN2505 | BF | TN2505 |
| Light
|
General
|
Heavy
|
||||
| Material
|
Geometry | Grade | Geometry | Grade | Geometry | Grade |
| P1–P2 | BF | TN2505 | BR | WP35CM | BR | WP35CM |
| P3–P4 | BF | TN2505 | BR | WP35CM | BR | WP35CM |
| P5–P6 | BF | TN2505 | BR | WP35CM | BR | WP35CM |
| M1–M2 | BR | WP35CM | BR | WP35CM | BR | WP35CM |
| M3 | BR | WP35CM | BR | WP35CM | BR | WP35CM |
| K1–K2 | BF | TN2505 | BF | WU10PM | BF | WU10PM |
| K3 | BF | TN2505 | BF | WU10PM | BF | WU10PM |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | – | – | – | – | – | – |
| S3 | – | – | – | – | – | – |
| S4 | – | – | – | – | – | – |
| H1 | BF | TN2505 | BF | TN2505 | BF | TN2505 |
| Light
|
General
|
Heavy
|
||||
| Material
|
Geometry | Grade | Geometry | Grade | Geometry | Grade |
| P1–P2 | BF | TN6525 | BR | TN6540 | BR | WP35CM |
| P3–P4 | BF | TN6525 | BR | TN6540 | BR | WP35CM |
| P5–P6 | BF | TN6525 | BR | TN6540 | BR | WP35CM |
| M1–M2 | BF | TN6525 | BF | TN6525 | BR | WP35CM |
| M3 | BF | TN6525 | BF | TN6525 | BR | WP35CM |
| K1–K2 | BF | TN2505 | BF | WU10PM | BF | WU10PM |
| K3 | BF | TN2505 | BF | WU10PM | BF | WU10PM |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | – | – | – | – | – | – |
| S3 | – | – | – | – | – | – |
| S4 | BF | TN2505 | – | – | – | – |
| H1 | BF | TN2505 | BF | TN2505 | BF | TN2505 |
| Light
|
General
|
Heavy
|
||||
| Material
|
Geometry | Grade | Geometry | Grade | Geometry | Grade |
| P1–P2 | BR | TN6540 | BF | TN6540 | BF | TN6540 |
| P3–P4 | BR | TN6540 | BF | TN6540 | BR | WP35CM |
| P5–P6 | BR | TN6540 | BR | WP35CM | BR | WP35CM |
| M1–M2 | BR | TN6540 | BR | TN6540 | BR | TN6540 |
| M3 | BR | TN6540 | BR | TN6540 | BR | TN6540 |
| K1–K2 | BR | TN2505 | BR | TN2505 | – | – |
| K3 | BR | TN2505 | BR | TN2505 | – | – |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | – | – | BR | TN6540 | – | – |
| S3 | – | – | BR | TN6540 | – | – |
| S4 | – | – | BR | TN6540 | – | – |
| H1 | – | – | BR | TN2505 | – | – |
| Light
|
General
|
Heavy
|
||||
| Material
|
Geometry | Grade | Geometry | Grade | Geometry | Grade |
| P1–P2 | BR | WP35CM | BR | WP35CM | BR | WP35CM |
| P3–P4 | BR | WP35CM | BR | WP35CM | BR | WP35CM |
| P5–P6 | BR | WP35CM | BR | WP35CM | BR | WP35CM |
| M1–M2 | BR | WP35CM | BR | WP35CM | BR | WP35CM |
| M3 | BR | WP35CM | BR | WP35CM | BR | WP35CM |
| K1–K2 | BF | TN2505 | BF | TN2505 | BF | TN2505 |
| K3 | BF | TN2505 | BF | TN2505 | BF | TN2505 |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | BR | WP35CM | – | – | – | – |
| S3 | BR | WP35CM | – | – | – | – |
| S4 | BF | TN2505 | BR | WP35CM | – | – |
| H1 | BF | TN2505 | BR | WP35CM | BR | WP35CM |
| Light
|
General
|
Heavy
|
||||
| Material
|
Geometry | Grade | Geometry | Grade | Geometry | Grade |
| P1–P2 | BR | WP35CM | BR | WP35CM | BR | WP35CM |
| P3–P4 | BR | WP35CM | BR | WP35CM | BR | WP35CM |
| P5–P6 | BR | WP35CM | BR | WP35CM | BR | WP35CM |
| M1–M2 | BR | WP35CM | BR | WP35CM | BR | WP35CM |
| M3 | BR | WP35CM | BR | WP35CM | BR | WP35CM |
| K1–K2 | BF | TN2505 | BF | TN2505 | BF | TN2505 |
| K3 | BF | TN2505 | BF | TN2505 | BF | TN2505 |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | BR | WP35CM | – | – | – | – |
| S3 | BR | WP35CM | – | – | – | – |
| S4 | BR | WP35CM | BR | WP35CM | – | – |
| H1 | BF | TN2505 | BF | TN2505 | BF | TN2505 |
| Light
|
General
|
Heavy
|
||||
| Material
|
Geometry | Grade | Geometry | Grade | Geometry | Grade |
| P1–P2 | BF | TN2505 | BR | TN7535 | BR | TN7535 |
| P3–P4 | BF | TN2505 | BR | TN7535 | BR | TN7535 |
| P5–P6 | BF | TN2505 | BR | TN7535 | BR | TN7535 |
| M1–M2 | BR | TN7535 | BR | TN7535 | BR | TN7535 |
| M3 | BR | TN7535 | BR | TN7535 | BR | TN7535 |
| K1–K2 | BF | TN2505 | BR | TN7535 | BR | TN7535 |
| K3 | BF | TN2505 | BR | TN7535 | BR | TN7535 |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | – | – | – | – | – | – |
| S3 | – | – | – | – | – | – |
| S4 | – | – | – | – | – | – |
| H1 | BF | TN2505 | BF | TN2505 | – | – |
| Light
|
General
|
Heavy
|
||||
| Material
|
Geometry | Grade | Geometry | Grade | Geometry | Grade |
| P1–P2 | BF | TN2505 | BR | TN7535 | BR | TN7535 |
| P3–P4 | BF | TN2505 | BR | TN7535 | BR | TN7535 |
| P5–P6 | BF | TN2505 | BR | TN7535 | BR | TN7535 |
| M1–M2 | BR | TN7535 | BR | TN7535 | BR | TN7535 |
| M3 | BR | TN7535 | BR | TN7535 | BR | TN7535 |
| K1–K2 | BF | TN2505 | BR | TN2510 | BR | TN7535 |
| K3 | BF | TN2505 | BR | TN2510 | BR | TN7535 |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | – | – | – | – | – | – |
| S3 | – | – | – | – | – | – |
| S4 | – | – | – | – | – | – |
| H1 | BF | TN2505 | BF | TN2505 | BR | TN2510 |
| Light
|
General
|
Heavy
|
||||
| Material
|
Geometry | Grade | Geometry | Grade | Geometry | Grade |
| P1–P2 | BF | TN6525 | BR | TN7535 | BR | TN7535 |
| P3–P4 | BF | TN6525 | BR | TN7535 | BR | TN7535 |
| P5–P6 | BF | TN6525 | BR | TN7535 | BR | TN7535 |
| M1–M2 | BF | TN6525 | BF | TN6525 | BR | TN7535 |
| M3 | BF | TN6525 | BF | TN6525 | BR | TN7535 |
| K1–K2 | BF | TN2505 | BR | TN7535 | BR | TN7535 |
| K3 | BF | TN2505 | BR | TN7535 | BR | TN7535 |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | – | – | – | – | – | – |
| S3 | – | – | – | – | – | – |
| S4 | BF | TN2505 | – | – | – | – |
| H1 | BF | TN2505 | BF | TN2505 | BR | TN2510 |
| Light
|
General
|
Heavy
|
||||
| Material
|
Geometry | Grade | Geometry | Grade | Geometry | Grade |
| P1–P2 | BF | TN6540 | BF | TN6540 | BF | TN6540 |
| P3–P4 | BF | TN6540 | BF | TN6540 | BF | TN7535 |
| P5–P6 | BF | TN6540 | BF | TN7535 | BF | TN7535 |
| M1–M2 | BF | TN6540 | BF | TN6540 | BF | TN7535 |
| M3 | BF | TN6540 | BF | TN6540 | BF | TN7535 |
| K1–K2 | BR | TN2505 | BR | TN2505 | – | – |
| K3 | BR | TN2505 | BR | TN2505 | – | – |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | – | – | BF | TN6540 | – | – |
| S3 | – | – | BF | TN6540 | – | – |
| S4 | – | – | BF | TN6540 | – | – |
| H1 | – | – | BR | TN2505 | – | – |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40
|
||||||||||||
| BF | 0,12 | 0,23 | 0,42 | 0,08 | 0,16 | 0,29 | 0,06 | 0,12 | 0,21 | 0,05 | 0,10 | 0,18 | 0,05 | 0,10 | 0,17 | BF |
| BR | 0,19 | 0,29 | 0,51 | 0,14 | 0,20 | 0,35 | 0,10 | 0,15 | 0,25 | 0,09 | 0,13 | 0,22 | 0,08 | 0,12 | 0,20 | BR |
| Light
|
General
|
Heavy
|
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40
|
||||||||||||
| BF | 0,14 | 0,27 | 0,49 | 0,10 | 0,19 | 0,34 | 0,07 | 0,14 | 0,25 | 0,06 | 0,12 | 0,21 | 0,06 | 0,11 | 0,19 | BF |
| BR | 0,22 | 0,34 | 0,61 | 0,16 | 0,24 | 0,40 | 0,12 | 0,17 | 0,29 | 0,10 | 0,15 | 0,25 | 0,09 | 0,14 | 0,23 | BR |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40
|
||||||||||||
| BF | 0,25 | 0,51 | 1,02 | 0,18 | 0,34 | 0,63 | 0,13 | 0,25 | 0,44 | 0,11 | 0,22 | 0,38 | 0,10 | 0,20 | 0,35 | BF |
| BR | 0,41 | 0,66 | 1,34 | 0,28 | 0,44 | 0,76 | 0,21 | 0,31 | 0,53 | 0,18 | 0,27 | 0,45 | 0,17 | 0,25 | 0,41 | BR |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40
|
||||||||||||
| BF | 0,18 | 0,36 | 0,68 | 0,13 | 0,25 | 0,45 | 0,09 | 0,18 | 0,32 | 0,08 | 0,16 | 0,28 | 0,08 | 0,15 | 0,25 | BF |
| BR | 0,29 | 0,46 | 0,84 | 0,21 | 0,31 | 0,54 | 0,15 | 0,23 | 0,39 | 0,13 | 0,20 | 0,33 | 0,12 | 0,18 | 0,30 | BR |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40
|
||||||||||||
| BR | 0,15 | 0,33 | 0,50 | 0,11 | 0,24 | 0,35 | 0,08 | 0,17 | 0,26 | 0,07 | 0,15 | 0,22 | 0,06 | 0,14 | 0,20 | BR |
| BF | 0,24 | 0,46 | 0,69 | 0,17 | 0,32 | 0,47 | 0,13 | 0,23 | 0,34 | 0,11 | 0,20 | 0,29 | 0,10 | 0,18 | 0,27 | BF |
| Light
|
General
|
Heavy
|
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40
|
||||||||||||
| BR | 0,13 | 0,29 | 0,43 | 0,09 | 0,20 | 0,30 | 0,07 | 0,15 | 0,22 | 0,06 | 0,13 | 0,19 | 0,06 | 0,12 | 0,18 | BR |
| BF | 0,21 | 0,39 | 0,58 | 0,15 | 0,27 | 0,40 | 0,11 | 0,20 | 0,29 | 0,10 | 0,18 | 0,25 | 0,09 | 0,16 | 0,23 | BF |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40
|
||||||||||||
| BR | 0,28 | 0,63 | 0,99 | 0,20 | 0,43 | 0,64 | 0,15 | 0,31 | 0,46 | 0,13 | 0,27 | 0,40 | 0,12 | 0,25 | 0,36 | BR |
| BF | 0,45 | 0,89 | 1,42 | 0,31 | 0,58 | 0,87 | 0,23 | 0,42 | 0,61 | 0,20 | 0,36 | 0,53 | 0,18 | 0,33 | 0,48 | BF |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40
|
||||||||||||
| BR | 0,20 | 0,45 | 0,68 | 0,14 | 0,31 | 0,46 | 0,11 | 0,23 | 0,34 | 0,09 | 0,20 | 0,29 | 0,08 | 0,18 | 0,27 | BR |
| BF | 0,32 | 0,61 | 0,94 | 0,23 | 0,42 | 0,62 | 0,17 | 0,31 | 0,45 | 0,15 | 0,26 | 0,38 | 0,13 | 0,24 | 0,35 | BF |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40
|
||||||||||||
| BF | 0,14 | 0,28 | 0,45 | 0,10 | 0,20 | 0,31 | 0,08 | 0,15 | 0,23 | 0,07 | 0,13 | 0,20 | 0,06 | 0,12 | 0,18 | BF |
| BR | 0,21 | 0,38 | 0,59 | 0,15 | 0,27 | 0,41 | 0,11 | 0,20 | 0,30 | 0,10 | 0,17 | 0,26 | 0,09 | 0,16 | 0,24 | BR |
| Light
|
General
|
Heavy
|
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40
|
||||||||||||
| BF | 0,16 | 0,33 | 0,52 | 0,12 | 0,23 | 0,36 | 0,09 | 0,17 | 0,27 | 0,08 | 0,15 | 0,23 | 0,07 | 0,14 | 0,21 | BF |
| BR | 0,24 | 0,45 | 0,69 | 0,17 | 0,31 | 0,48 | 0,13 | 0,23 | 0,35 | 0,11 | 0,20 | 0,30 | 0,10 | 0,18 | 0,28 | BR |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40
|
||||||||||||
| BF | 0,21 | 0,44 | 0,70 | 0,15 | 0,31 | 0,48 | 0,11 | 0,23 | 0,35 | 0,10 | 0,20 | 0,30 | 0,09 | 0,18 | 0,28 | BF |
| BR | 0,32 | 0,60 | 0,94 | 0,23 | 0,42 | 0,63 | 0,17 | 0,31 | 0,46 | 0,15 | 0,26 | 0,40 | 0,13 | 0,24 | 0,36 | BR |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40
|
||||||||||||
| BF | 0,29 | 0,61 | 0,99 | 0,21 | 0,43 | 0,66 | 0,16 | 0,31 | 0,48 | 0,14 | 0,27 | 0,42 | 0,12 | 0,25 | 0,38 | BF |
| BR | 0,44 | 0,85 | 1,38 | 0,31 | 0,57 | 0,88 | 0,23 | 0,42 | 0,63 | 0,20 | 0,36 | 0,54 | 0,18 | 0,33 | 0,50 | BR |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40
|
||||||||||||
| BF | 0,19 | 0,24 | 0,40 | 0,13 | 0,17 | 0,28 | 0,10 | 0,13 | 0,21 | 0,09 | 0,11 | 0,18 | 0,08 | 0,10 | 0,17 | BF |
| BR | 0,24 | 0,38 | 0,65 | 0,17 | 0,27 | 0,46 | 0,13 | 0,20 | 0,34 | 0,11 | 0,17 | 0,30 | 0,10 | 0,16 | 0,27 | BR |
| Light
|
General
|
Heavy
|
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40
|
||||||||||||
| BF | 0,22 | 0,28 | 0,46 | 0,15 | 0,20 | 0,33 | 0,12 | 0,15 | 0,24 | 0,10 | 0,13 | 0,21 | 0,09 | 0,12 | 0,19 | BF |
| BR | 0,27 | 0,44 | 0,76 | 0,20 | 0,31 | 0,53 | 0,15 | 0,23 | 0,39 | 0,13 | 0,20 | 0,34 | 0,12 | 0,18 | 0,31 | BR |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40
|
||||||||||||
| BF | 0,39 | 0,51 | 0,85 | 0,28 | 0,36 | 0,59 | 0,21 | 0,27 | 0,44 | 0,18 | 0,23 | 0,38 | 0,17 | 0,21 | 0,35 | BF |
| BR | 0,50 | 0,81 | 1,44 | 0,36 | 0,56 | 0,97 | 0,26 | 0,42 | 0,71 | 0,23 | 0,36 | 0,61 | 0,21 | 0,33 | 0,56 | BR |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40
|
||||||||||||
| BF | 0,28 | 0,37 | 0,61 | 0,20 | 0,27 | 0,43 | 0,15 | 0,20 | 0,32 | 0,13 | 0,17 | 0,28 | 0,12 | 0,16 | 0,25 | BF |
| BR | 0,36 | 0,58 | 1,01 | 0,26 | 0,41 | 0,70 | 0,19 | 0,30 | 0,52 | 0,17 | 0,26 | 0,45 | 0,15 | 0,24 | 0,41 | BR |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40
|
||||||||||||
| BF | 0,17 | 0,31 | 0,50 | 0,13 | 0,22 | 0,36 | 0,09 | 0,16 | 0,26 | 0,08 | 0,14 | 0,23 | 0,08 | 0,13 | 0,21 | BF |
| BR | 0,24 | 0,38 | 0,65 | 0,17 | 0,27 | 0,46 | 0,13 | 0,20 | 0,34 | 0,11 | 0,17 | 0,30 | 0,10 | 0,16 | 0,27 | BR |
| Light
|
General
|
Heavy
|
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40
|
||||||||||||
| BF | 0,20 | 0,35 | 0,58 | 0,15 | 0,25 | 0,41 | 0,11 | 0,19 | 0,30 | 0,09 | 0,16 | 0,27 | 0,09 | 0,15 | 0,24 | BF |
| BR | 0,27 | 0,44 | 0,76 | 0,20 | 0,31 | 0,53 | 0,15 | 0,23 | 0,39 | 0,13 | 0,20 | 0,34 | 0,12 | 0,18 | 0,31 | BR |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40
|
||||||||||||
| BF | 0,37 | 0,65 | 1,09 | 0,26 | 0,46 | 0,75 | 0,19 | 0,34 | 0,55 | 0,17 | 0,29 | 0,47 | 0,15 | 0,27 | 0,43 | BF |
| BR | 0,50 | 0,81 | 1,44 | 0,36 | 0,56 | 0,97 | 0,26 | 0,42 | 0,71 | 0,23 | 0,36 | 0,61 | 0,21 | 0,33 | 0,56 | BR |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40
|
||||||||||||
| BF | 0,27 | 0,47 | 0,77 | 0,19 | 0,33 | 0,54 | 0,14 | 0,25 | 0,40 | 0,12 | 0,21 | 0,35 | 0,11 | 0,20 | 0,32 | BF |
| BR | 0,36 | 0,58 | 1,02 | 0,26 | 0,41 | 0,70 | 0,19 | 0,30 | 0,52 | 0,17 | 0,26 | 0,45 | 0,15 | 0,24 | 0,41 | BR |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40
|
||||||||||||
| BF | .005 | .009 | .016 | .003 | .006 | .011 | .002 | .005 | .008 | .002 | .004 | .007 | .002 | .004 | .007 | BF |
| BR | .007 | .011 | .020 | .005 | .008 | .013 | .004 | .006 | .010 | .003 | .005 | .008 | .003 | .005 | .008 | BR |
| Light
|
General
|
Heavy
|
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40
|
||||||||||||
| BF | .005 | .010 | .019 | .004 | .007 | .013 | .003 | .005 | .010 | .002 | .005 | .008 | .002 | .004 | .008 | BF |
| BR | .009 | .013 | .023 | .006 | .009 | .016 | .004 | .007 | .011 | .004 | .006 | .010 | .004 | .005 | .009 | BR |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40
|
||||||||||||
| BF | .010 | .020 | .039 | .007 | .013 | .024 | .005 | .010 | .017 | .004 | .008 | .015 | .004 | .008 | .013 | BF |
| BR | .016 | .025 | .051 | .011 | .017 | .029 | .008 | .012 | .021 | .007 | .011 | .018 | .006 | .010 | .016 | BR |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40
|
||||||||||||
| BF | .007 | .014 | .026 | .005 | .010 | .017 | .004 | .007 | .013 | .003 | .006 | .011 | .003 | .006 | .010 | BF |
| BR | .011 | .018 | .033 | .008 | .012 | .021 | .006 | .009 | .015 | .005 | .008 | .013 | .005 | .007 | .012 | BR |
| Light
|
General
|
Heavy
|
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40
|
||||||||||||
| BF | .005 | .011 | .017 | .004 | .008 | .012 | .003 | .006 | .009 | .002 | .005 | .007 | .002 | .005 | .007 | BF |
| BR | .008 | .015 | .023 | .006 | .011 | .016 | .004 | .008 | .011 | .004 | .007 | .010 | .003 | .006 | .009 | BR |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40
|
||||||||||||
| BF | .006 | .013 | .020 | .004 | .009 | .014 | .003 | .007 | .010 | .003 | .006 | .009 | .003 | .005 | .008 | BF |
| BR | .009 | .018 | .027 | .007 | .012 | .018 | .005 | .009 | .013 | .004 | .008 | .011 | .004 | .007 | .010 | BR |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40
|
||||||||||||
| BF | .008 | .017 | .026 | .006 | .012 | .018 | .004 | .009 | .013 | .004 | .008 | .011 | .003 | .007 | .010 | BF |
| BR | .012 | .024 | .036 | .009 | .016 | .024 | .006 | .012 | .017 | .006 | .010 | .015 | .005 | .009 | .014 | BR |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40
|
||||||||||||
| BF | .011 | .024 | .038 | .008 | .017 | .025 | .006 | .012 | .018 | .005 | .011 | .015 | .004 | .010 | .014 | BF |
| BR | .017 | .034 | .055 | .012 | .022 | .034 | .009 | .016 | .024 | .008 | .014 | .020 | .007 | .013 | .019 | BR |
| Light
|
General
|
Heavy
|
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40
|
||||||||||||
| BF | .005 | .011 | .017 | .004 | .008 | .012 | .003 | .006 | .009 | .003 | .005 | .008 | .002 | .005 | .007 | BF |
| BR | .008 | .015 | .023 | .006 | .011 | .016 | .004 | .008 | .012 | .004 | .007 | .010 | .003 | .006 | .009 | BR |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40
|
||||||||||||
| BF | .006 | .013 | .020 | .005 | .009 | .014 | .003 | .007 | .010 | .003 | .006 | .009 | .003 | .005 | .008 | BF |
| BR | .009 | .017 | .027 | .007 | .012 | .018 | .005 | .009 | .014 | .004 | .008 | .012 | .004 | .007 | .011 | BR |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40
|
||||||||||||
| BF | .011 | .024 | .038 | .008 | .016 | .026 | .006 | .012 | .019 | .005 | .011 | .016 | .005 | .010 | .015 | BF |
| BR | .017 | .033 | .053 | .012 | .022 | .034 | .009 | .016 | .024 | .008 | .014 | .021 | .007 | .013 | .019 | BR |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40
|
||||||||||||
| BF | .008 | .017 | .027 | .006 | .012 | .019 | .004 | .009 | .014 | .004 | .008 | .012 | .004 | .007 | .011 | BF |
| BR | .012 | .023 | .036 | .009 | .016 | .024 | .006 | .012 | .018 | .006 | .010 | .015 | .005 | .009 | .014 | BR |
| Light
|
General
|
Heavy
|
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40
|
||||||||||||
| BR | .005 | .011 | .017 | .004 | .008 | .012 | .003 | .006 | .009 | .003 | .005 | .008 | .002 | .005 | .007 | BR |
| BF | .007 | .014 | .022 | .005 | .010 | .015 | .004 | .007 | .011 | .003 | .006 | .010 | .003 | .006 | .009 | BF |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40
|
||||||||||||
| BR | .006 | .013 | .020 | .005 | .009 | .014 | .003 | .007 | .010 | .003 | .006 | .009 | .003 | .005 | .008 | BR |
| BF | .008 | .016 | .025 | .006 | .011 | .018 | .005 | .008 | .013 | .004 | .007 | .011 | .004 | .007 | .010 | BF |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40
|
||||||||||||
| BR | .011 | .023 | .037 | .008 | .016 | .026 | .006 | .012 | .019 | .005 | .011 | .016 | .005 | .010 | .015 | BR |
| BF | .015 | .030 | .049 | .011 | .021 | .032 | .008 | .015 | .024 | .007 | .013 | .020 | .006 | .012 | .019 | BF |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40
|
||||||||||||
| BR | .008 | .017 | .027 | .006 | .012 | .018 | .004 | .009 | .014 | .004 | .008 | .012 | .004 | .007 | .011 | BR |
| BF | .011 | .021 | .034 | .008 | .015 | .023 | .006 | .011 | .017 | .005 | .010 | .015 | .005 | .009 | .014 | BF |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40
|
||||||||||||
| BF | .007 | .009 | .015 | .005 | .007 | .011 | .004 | .005 | .008 | .003 | .004 | .007 | .003 | .004 | .007 | BF |
| BR | .009 | .015 | .025 | .007 | .011 | .018 | .005 | .008 | .013 | .004 | .007 | .012 | .004 | .006 | .011 | BR |
| Light
|
General
|
Heavy
|
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40
|
||||||||||||
| BF | .008 | .011 | .018 | .006 | .008 | .013 | .004 | .006 | .009 | .004 | .005 | .008 | .004 | .005 | .008 | BF |
| BR | .011 | .017 | .030 | .008 | .012 | .021 | .006 | .009 | .015 | .005 | .008 | .013 | .005 | .007 | .012 | BR |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40
|
||||||||||||
| BF | .015 | .020 | .033 | .011 | .014 | .023 | .008 | .010 | .017 | .007 | .009 | .015 | .006 | .008 | .013 | BF |
| BR | .020 | .031 | .056 | .014 | .022 | .038 | .010 | .016 | .028 | .009 | .014 | .024 | .008 | .013 | .022 | BR |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40
|
||||||||||||
| BF | .011 | .014 | .024 | .008 | .010 | .017 | .006 | .008 | .012 | .005 | .007 | .011 | .005 | .006 | .010 | BF |
| BR | .014 | .023 | .040 | .010 | .016 | .027 | .008 | .012 | .020 | .007 | .010 | .017 | .006 | .009 | .016 | BR |
Velocidades iniciales recomendadas [m/min]
| Material Group | TN2505 | TN6525 | TN6540 | WP35CM | WU10PM | |||||||||||
| P | 1 | 550 | 420 | 360 | 410 | 320 | 280 | 360 | 280 | 240 | 455 | 395 | 370 | – | – | – |
| 2 | 320 | 240 | 205 | 320 | 250 | 215 | 250 | 190 | 170 | 280 | 255 | 230 | – | – | – | |
| 3 | 320 | 240 | 205 | 280 | 215 | 185 | 215 | 170 | 140 | 255 | 230 | 205 | – | – | – | |
| 4 | – | – | – | 235 | 170 | 145 | 180 | 130 | 110 | 190 | 175 | 160 | – | – | – | |
| 5 | – | – | – | 310 | 235 | 200 | 240 | 180 | 150 | 260 | 230 | 210 | – | – | – | |
| 6 | – | – | – | 205 | 160 | 130 | 160 | 120 | 100 | 160 | 135 | 110 | – | – | – | |
| M | 1 | – | – | – | 190 | 120 | 80 | 130 | 80 | 60 | 205 | 185 | 155 | – | – | – |
| 2 | – | – | – | 120 | 80 | 50 | 80 | 50 | 40 | 185 | 160 | 140 | – | – | – | |
| 3 | – | – | – | 125 | 80 | 55 | 85 | 50 | 40 | 145 | 130 | 115 | – | – | – | |
| K | 1 | 400 | 300 | 250 | 275 | 245 | 220 | 220 | 205 | 180 | 295 | 265 | 240 | 295 | 265 | 240 |
| 2 | 540 | 365 | 280 | 215 | 190 | 180 | 175 | 155 | 140 | 235 | 210 | 190 | 230 | 205 | 190 | |
| 3 | 310 | 190 | 155 | 180 | 160 | 145 | 155 | 145 | 125 | 195 | 175 | 160 | 195 | 175 | 160 | |
| N | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | 50 | 35 | 30 | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | 25 | 20 | 10 | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | 70 | 40 | 30 | – | – | – | – | – | – | |
| 4 | – | – | – | – | – | – | 60 | 30 | 25 | 66 | 50 | 33 | – | – | – | |
| H | 1 | 175 | 140 | 95 | – | – | – | – | – | – | – | – | – | 160 | 130 | 90 |
| 2 | 175 | 140 | 95 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | 140 | 115 | 80 | – | – | – | – | – | – | – | – | – | – | – | – | |
Recommended Starting Speeds [SFM]
| Material Group | TN2505 | TN2510 | TN6525 | TN6540 | TN7525 | TN7535 | TTI25 | |||||||||||||||
| P | 1 | 1810 | 1380 | 1180 | 2165 | 1910 | 1770 | 1340 | 1045 | 925 | 1180 | 925 | 785 | 1340 | 1025 | 925 | 1790 | 1555 | 1460 | 1415 | 1180 | 985 |
| 2 | 1045 | 785 | 670 | 1340 | 1220 | 1080 | 1045 | 830 | 710 | 830 | 630 | 550 | 1025 | 830 | 710 | 1105 | 1000 | 905 | 1025 | 830 | 710 | |
| 3 | 1045 | 785 | 670 | 1220 | 1080 | 1000 | 925 | 710 | 610 | 710 | 550 | 450 | 925 | 710 | 610 | 1000 | 905 | 805 | 1025 | 830 | 710 | |
| 4 | – | – | – | 905 | 845 | 750 | 770 | 550 | 475 | 590 | 430 | 355 | 770 | 550 | 475 | 750 | 690 | 630 | 865 | 710 | 590 | |
| 5 | – | – | – | 1080 | 985 | 905 | 1025 | 770 | 650 | 785 | 590 | 490 | 1025 | 770 | 650 | 1025 | 905 | 830 | 1045 | 770 | 650 | |
| 6 | – | – | – | 750 | 670 | 570 | 670 | 535 | 430 | 535 | 395 | 335 | 670 | 535 | 430 | 630 | 535 | 430 | 475 | 355 | 295 | |
| M | 1 | – | – | – | 890 | 785 | 690 | 630 | 395 | 260 | 430 | 260 | 200 | 805 | 725 | 610 | 805 | 725 | 610 | 1570 | 1025 | 710 |
| 2 | – | – | – | 805 | 690 | 630 | 395 | 260 | 155 | 260 | 155 | 140 | 725 | 630 | 550 | 725 | 630 | 550 | 1060 | 670 | 475 | |
| 3 | – | – | – | 630 | 570 | 490 | 415 | 260 | 180 | 275 | 155 | 140 | 570 | 510 | 450 | 570 | 510 | 450 | 1045 | 690 | 475 | |
| K | 1 | 1320 | 985 | 830 | 1380 | 1180 | 985 | 905 | 805 | 725 | 725 | 670 | 590 | 1240 | 925 | 785 | 1165 | 1045 | 940 | 725 | 610 | 510 |
| 2 | 1770 | 1200 | 925 | 1180 | 985 | 830 | 710 | 630 | 590 | 570 | 510 | 450 | 1060 | 785 | 650 | 925 | 830 | 750 | 590 | 475 | 415 | |
| 3 | 1025 | 630 | 510 | 985 | 830 | 650 | 590 | 535 | 475 | 510 | 475 | 415 | 785 | 650 | 550 | 770 | 690 | 630 | 475 | 415 | 335 | |
| N | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | – | – | – | 155 | 120 | 95 | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | 80 | 60 | 40 | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | 235 | 140 | 95 | – | – | – | – | – | – | – | – | – | |
| 4 | – | – | – | – | – | – | – | – | – | 200 | 95 | 80 | – | – | – | – | – | – | – | – | – | |
| H | 1 | 570 | 450 | 310 | 475 | 360 | 230 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | 570 | 450 | 310 | 475 | 360 | 230 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | 450 | 370 | 260 | 380 | 260 | 150 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |