Suggestions

Product Suggestions

Product Categories

Resources

successfully added to cart
View Cart

La serie M370™ está diseñada para una productividad de alto avance.

La serie M370™ se ha diseñado para una productividad con altas tasas de avance, su concepto de doble cara y seis filos de corte ofrecen seguridad y una tasa de evacuación del metal óptima con un coste por filo de corte eficiente.

  • Tasa de evacuación del metal muy alta
  • La primera opción para aplicaciones de desbaste de alto avance
  • Refrigeración interna
  • Seis filos de corte por plaquita
  • Varios tipos de cuerpos de fresa
Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (85)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (80)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (85)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (85)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (85)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (85)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (85)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (85)
  • M Stainless Steel (85)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (85)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (85)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (85)
  • K Cast Iron (73)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (73)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (73)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (73)
  • N Non-Ferrous Materials (65)
    • N1
      Wrought Aluminum
      (65)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (65)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (65)
  • S High-Temp Alloys (83)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (81)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (81)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (81)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (83)
  • H Hardened Materials (67)
    • H1
      Hardened Materials 44-48 HRC
      (67)
Select All Star
  • CN (9)
  • DE (27)
  • GB (10)
  • IN (6)
  • US (23)
Applications
Applications
  • Chamfer Milling Chamfer Milling (2)
  • Face Milling Face Milling (60)
  • Pocket Pocket (60)
  • Pocket Helical Pocket Helical (58)
  • Pocket Milling Pocket Milling (60)
  • Pocket Plunge Milling Pocket Plunge Milling (59)
  • Profile Milling Profile Milling (60)
  • Ramping Ramping (60)
  • Shoulder Milling Shoulder Milling (58)
  • Shoulder Roughing Shoulder Roughing (58)
  • Slot Milling Slot Milling (58)
  • Slot Square End Slot Square End (1)
Cutting Diameter
Cutting Diameter
  • 11.2 mm (3)
  • 11.3 mm (3)
  • 11.6 mm (3)
  • 11.7 mm (1)
  • 14.1 mm (1)
  • 17.8 mm (2)
  • 18.06 mm (1)
  • 18.1 mm (2)
  • 18.2 mm (1)
  • 21.27 mm (2)
  • 24.1 mm (1)
  • 24.2 mm (2)
  • 26.0 mm (1)
  • 26.1 mm (1)
  • 28.0 mm (1)
  • 33.11 mm (1)
  • 33.91 mm (2)
  • 35.11 mm (1)
  • 36.0 mm (2)
  • 36.8 mm (2)
  • 38.07 mm (2)
  • 46.09 mm (2)
  • 46.59 mm (2)
  • 49.051 mm (1)
  • 49.08 mm (1)
  • 49.5 mm (1)
  • 51.9 mm (1)
  • 57.7 mm (1)
  • 59.14 mm (1)
  • 59.27 mm (3)
  • 62.2 mm (1)
  • 63.07 mm (2)
  • 66.0 mm (1)
  • 83.06 mm (2)
  • 84.65 mm (2)
  • 108.05 mm (2)
  • 110.05 mm (1)
  • 135.44 mm (1)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 0.44 in (4)
  • 0.4409 in (2)
  • 0.46 in (4)
  • 0.56 in (1)
  • 0.7 in (2)
  • 0.71 in (2)
  • 0.711 in (1)
  • 0.72 in (1)
  • 0.837 in (2)
  • 0.95 in (3)
  • 1.02 in (1)
  • 1.03 in (1)
  • 1.1 in (1)
  • 1.304 in (1)
  • 1.335 in (2)
  • 1.382 in (1)
  • 1.42 in (2)
  • 1.45 in (2)
  • 1.499 in (2)
  • 1.814 in (2)
  • 1.834 in (2)
  • 1.931 in (1)
  • 1.932 in (1)
  • 1.95 in (1)
  • 2.04 in (1)
  • 2.27 in (1)
  • 2.328 in (1)
  • 2.333 in (3)
  • 2.45 in (1)
  • 2.483 in (2)
  • 2.6 in (1)
  • 3.27 in (2)
  • 3.333 in (2)
  • 4.254 in (2)
  • 4.333 in (1)
  • 5.332 in (1)
Cutting Diameter Min to Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 0.984 in (6)
  • 1.0 in (4)
  • 1.102 in (1)
  • 1.25 in (2)
  • 1.26 in (4)
  • 1.5 in (5)
  • 1.575 in (2)
  • 1.653 in (1)
  • 1.968 in (1)
  • 1.969 in (2)
  • 2.0 in (4)
  • 2.047 in (3)
  • 2.48 in (3)
  • 2.5 in (3)
  • 2.598 in (2)
  • 3.0 in (6)
  • 3.149 in (1)
  • 3.15 in (2)
  • 3.937 in (2)
  • 4.0 in (2)
  • 4.921 in (2)
  • 5.0 in (1)
  • 6.0 in (1)
Maximum Cutting Diameter Min to Maximum Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 25.0 mm (6)
  • 25.4 mm (4)
  • 28.0 mm (1)
  • 31.75 mm (2)
  • 32.0 mm (4)
  • 38.1 mm (5)
  • 40.0 mm (2)
  • 42.0 mm (1)
  • 50.0 mm (3)
  • 50.8 mm (4)
  • 52.0 mm (3)
  • 63.0 mm (3)
  • 63.5 mm (3)
  • 66.0 mm (2)
  • 76.2 mm (6)
  • 80.0 mm (3)
  • 100.0 mm (2)
  • 101.6 mm (2)
  • 125.0 mm (2)
  • 127.0 mm (1)
  • 152.4 mm (1)
Maximum Cutting Diameter Min to Maximum Cutting Diameter Max
Cutting Length
Cutting Length
  • 0.049 in (35)
  • 0.078 in (25)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 1.25 mm (35)
  • 2.0 mm (25)
Cutting Length Min to Cutting Length Max
Reach
Reach
  • 35.0 mm (3)
  • 38.1 mm (7)
  • 40.0 mm (15)
  • 42.93 mm (1)
  • 43.0 mm (2)
  • 44.45 mm (3)
  • 50.0 mm (18)
  • 50.04 mm (1)
  • 50.79 mm (1)
  • 50.8 mm (4)
  • 60.33 mm (2)
  • 63.0 mm (2)
  • 63.5 mm (1)
Reach Min to Reach Max
Reach
Reach
  • 1.378 in (3)
  • 1.499 in (1)
  • 1.5 in (6)
  • 1.574 in (2)
  • 1.575 in (13)
  • 1.69 in (1)
  • 1.693 in (2)
  • 1.75 in (3)
  • 1.968 in (8)
  • 1.969 in (7)
  • 1.97 in (4)
  • 2.0 in (5)
  • 2.375 in (2)
  • 2.48 in (2)
  • 2.5 in (1)
Reach Min to Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 12.0 (34)
  • 15.0 (24)
  • 75.0 (1)
  • 78.0 (1)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • 2 Key & Cutter Retention Screw (1)
  • 2 Key & Socket Head Cap Screw (1)
  • A-Socket Head Cap Screw (36)
  • Screw-On Connection (5)
  • Straight-Cylindrical (17)
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 1.22 mm (47)
  • 1.27 mm (40)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.0482 in (47)
  • 0.05 in (40)
Corner Radius Min to Corner Radius Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • TN5515 (35)
  • TN6520 (35)
  • TN6525 (37)
  • TN6540 (37)
  • TN7535 (35)
  • WK15CM (62)
  • WP20CM (25)
  • WP25PM (65)
  • WP35CM (27)
  • WP40PM (65)
  • WS30PM (62)
  • WS40PM (65)
  • WU35PM (27)
Hand Of Tool
Hand Of Tool
  • R (60)
Wiper Insert
Wiper Insert
  • N (27)
Maximum Ramp Angle
Maximum Ramp Angle
  • 0.48 (1)
  • 0.5 (3)
  • 0.62 (1)
  • 0.66 (1)
  • 0.8 (1)
  • 0.81 (1)
  • 0.83 (3)
  • 0.84 (2)
  • 1.0 (3)
  • 1.01 (1)
  • 1.09 (2)
  • 1.3 (4)
  • 1.41 (6)
  • 1.46 (2)
  • 1.5 (3)
  • 1.73 (1)
  • 1.8 (2)
  • 1.9 (4)
  • 2.05 (3)
  • 2.09 (5)
  • 2.4 (1)
  • 2.5 (3)
  • 2.6 (1)
  • 3.5 (1)
  • 3.6 (2)
  • 3.7 (1)
  • 6.4 (2)
Maximum Ramp Angle Min to Maximum Ramp Angle Max
frontEnd
Insert Shape
Insert Shape
  • X-TRIGON WO_J 101.5 (77)
  • X-TRIGON WO_J 80 (45)
Neck Diameter
Neck Diameter
  • 21.0 mm (1)
  • 21.391 mm (3)
  • 22.0 mm (3)
  • 23.0 mm (1)
  • 27.74 mm (1)
  • 27.741 mm (1)
  • 29.0 mm (3)
  • 30.373 mm (1)
  • 33.621 mm (1)
Neck Diameter Min to Neck Diameter Max
Neck Diameter
Neck Diameter
  • 0.827 in (1)
  • 0.842 in (3)
  • 0.866 in (3)
  • 0.906 in (1)
  • 1.092 in (2)
  • 1.142 in (3)
  • 1.196 in (1)
  • 1.324 in (1)
Neck Diameter Min to Neck Diameter Max
Center Cutting
Center Cutting
insertGeometry
Shape
Shape
  • X-TRIGON WO_J 101.5 (17)
  • X-TRIGON WO_J 80 (10)
Insert IC Size
Insert IC Size
  • 0.3068 in (6)
  • 0.3069 in (6)
  • 0.472 in (15)
Insert IC Size Min to Insert IC Size Max
Insert IC Size
Insert IC Size
  • 7.794 mm (12)
  • 12.0 mm (15)
Insert IC Size Min to Insert IC Size Max
Cutting Edge Length
Cutting Edge Length
  • 0.246 in (12)
Cutting Edge Length Min to Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 6.3 mm (12)
Cutting Edge Length Min to Cutting Edge Length Max
Chip Breaker CBMD
Chip Breaker CBMD
  • MH (12)
  • MM (12)
  • MR (3)
Cutting Tool Material
Cutting Tool Material
  • H W (27)
Tolerance Class
Tolerance Class
  • E (27)
backEnd
Connection Type
Connection Type
  • CYLINDRICAL (17)
  • SCREW-ON (5)
  • SHELL MILL (38)
Back-End Diameter
Back-End Diameter
  • 0.5 in (1)
  • 0.6299 in (1)
  • 0.63 in (1)
  • 0.75 in (6)
  • 0.8268 in (3)
  • 0.866 in (1)
  • 0.8661 in (3)
  • 0.867 in (2)
  • 0.87 in (3)
  • 0.9843 in (5)
  • 1.0 in (8)
  • 1.06 in (2)
  • 1.063 in (1)
  • 1.064 in (2)
  • 1.1417 in (2)
  • 1.25 in (6)
  • 1.2598 in (3)
  • 1.26 in (2)
  • 1.5 in (5)
  • 1.58 in (2)
  • 2.0 in (1)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 12.7 mm (1)
  • 16.0 mm (2)
  • 19.05 mm (3)
  • 19.1 mm (3)
  • 21.0 mm (3)
  • 22.0 mm (9)
  • 25.0 mm (5)
  • 25.4 mm (8)
  • 27.0 mm (5)
  • 29.0 mm (2)
  • 31.7 mm (2)
  • 31.75 mm (2)
  • 31.8 mm (2)
  • 32.0 mm (5)
  • 38.1 mm (5)
  • 40.0 mm (2)
  • 50.8 mm (1)
Back-End Diameter Min to Back-End Diameter Max
hidden
Category Path
Category Path
other
Grade
Grade
  • TN6525 (2)
  • TN6540 (2)
  • WK15CM (2)
  • WP25PM (5)
  • WP35CM (2)
  • WP40PM (5)
  • WS30PM (2)
  • WS40PM (5)
  • WU35PM (2)
Tool Unit
Tool Unit
  • I (54)
  • M (58)
Insert Hand
Insert Hand
  • R (27)
Number of Inserts
Number of Inserts
  • 2.0 (7)
  • 3.0 (10)
  • 4.0 (11)
  • 5.0 (11)
  • 6.0 (11)
  • 7.0 (6)
  • 8.0 (2)
  • 9.0 (2)
Number of Inserts Min to Number of Inserts Max
Over All Length [L]
Over All Length [L]
  • 40.0 mm (9)
  • 44.45 mm (3)
  • 50.0 mm (16)
  • 50.04 mm (1)
  • 50.79 mm (1)
  • 50.8 mm (4)
  • 57.0 mm (2)
  • 57.01 mm (1)
  • 60.33 mm (2)
  • 63.0 mm (2)
  • 67.5 mm (2)
  • 150.0 mm (2)
  • 152.4 mm (4)
  • 152.41 mm (1)
  • 195.21 mm (1)
  • 200.0 mm (4)
  • 203.2 mm (2)
  • 254.0 mm (1)
  • 300.0 mm (2)
Over All Length [L] Min to Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 1.575 in (9)
  • 1.75 in (3)
  • 1.968 in (6)
  • 1.969 in (7)
  • 1.97 in (4)
  • 2.0 in (5)
  • 2.244 in (2)
  • 2.245 in (1)
  • 2.375 in (2)
  • 2.48 in (2)
  • 2.657 in (2)
  • 5.906 in (2)
  • 6.0 in (5)
  • 7.686 in (1)
  • 7.874 in (4)
  • 8.0 in (2)
  • 10.0 in (1)
  • 11.811 in (2)
Over All Length [L] Min to Over All Length [L] Max
Head Length [L2]
Head Length [L2]
  • 35.0 mm (3)
  • 42.93 mm (1)
  • 43.0 mm (2)
  • 63.5 mm (1)
Head Length [L2] Min to Head Length [L2] Max
Head Length [L2]
Head Length [L2]
  • 1.378 in (3)
  • 1.69 in (1)
  • 1.693 in (2)
  • 2.5 in (1)
Head Length [L2] Min to Head Length [L2] Max
Solid Indexable Tool
Solid Indexable Tool
No filters matching ""
Narrow by category:
View Products in
Metric
Inch

ORIGINAL PRODUCT

Copy Mills • M370™ • IC12

Shell Mills • Large • Inch
(12 Products)
  • Fresado — lateral y planeadoFresado — lateral y planeado
  • Perfilado 3DPerfilado 3D
  • Fresado lateral/Fresado en escuadra: DesbasteFresado lateral/Fresado en escuadra: Desbaste
  • Ranurado: Placa cuadradaRanurado: Placa cuadrada
  • PlaneadoPlaneado
  • Rectificado en rampa: Material en brutoRectificado en rampa: Material en bruto
  • Mecanizado de alojamientosMecanizado de alojamientos
  • Fresado helicoidalFresado helicoidal
  • VaciadoVaciado
  • Fresado — Con refrigeración internaFresado — Con refrigeración interna
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D6] Hub Diameter [D6] Hub Diameter [L] Overall Length [L] Overall Length [L1] Gage Length [L1] Gage Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Max RPM Coolant Supply Weight Pounds
5352399 M370D250Z05S100WO12 M370D250Z05S100WO12   63.5000 2.500 46.5900 1.834 25.4 1.0 55.6300 2.190 44.4500 1.750 44.4500 1.750 2.0000 .0780 5 17330 Y 1.27
    List price:
    $565.53 /each.
    Your price::
    5352420 M370D300Z06S100WO12 M370D300Z06S100WO12   76.2000 3.000 59.2700 2.333 25.4 1.0 69.8500 2.750 44.4500 1.750 44.4500 1.750 2.0000 .0780 6 15820 Y 2.08
      List price:
      $651.81 /each.
      Your price::
      5352397 M370D200Z04S075WO12 M370D200Z04S075WO12   50.8000 2.000 33.9100 1.335 19.1 .75 44.4500 1.750 40.0000 1.575 40.0000 1.575 2.0000 .0780 4 19380 Y 0.69
        List price:
        $530.51 /each.
        Your price::
        5698432 M370D200Z04S075WO12L200 M370D200Z04S075WO12L200   50.8000 2.000 33.9100 1.335 19.1 .75 44.4500 1.750 50.7900 2.000 50.7900 2.000 2.0000 .0780 4 19380 Y 0.92
          List price:
          $530.51 /each.
          Your price::
          5352423 M370D400Z06S150WO12 M370D400Z06S150WO12   101.6000 4.000 84.6500 3.333 38.1 1.5 92.0800 3.625 50.8000 2.000 50.8000 2.000 2.0000 .0780 6 13700 Y 3.81
            List price:
            $749.60 /each.
            Your price::
            5352398 M370D250Z05S075WO12 M370D250Z05S075WO12   63.5000 2.500 46.5900 1.834 19.1 .75 44.4500 1.750 44.4500 1.750 44.4500 1.750 2.0000 .0780 5 17330 Y 1.06
              List price:
              $565.53 /each.
              Your price::
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor

              ORIGINAL PRODUCT

              Fresas de alto avance • M370™ • IC08

              Fresas de mango cilíndrico • Medio • Sistema métrico
              (8 Products)
              • Mango — Liso cilíndricoMango — Liso cilíndrico
              • Perfilado 3DPerfilado 3D
              • Fresado lateral/Fresado en escuadra: DesbasteFresado lateral/Fresado en escuadra: Desbaste
              • Ranurado: Placa cuadradaRanurado: Placa cuadrada
              • PlaneadoPlaneado
              • Rectificado en rampa: Material en brutoRectificado en rampa: Material en bruto
              • Mecanizado de alojamientosMecanizado de alojamientos
              • VaciadoVaciado
              • Fresado — Con refrigeración internaFresado — Con refrigeración interna
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L1] Gage Length [L1] Gage Length [LBX] Body Length Maximum [LBX] Body Length Maximum [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Max RPM Coolant Supply Weight Kilograms
              4056189 M370D025Z03A25WO08L150 M370D025Z03A25WO08L150   25.0000 .9840 11.2000 .4400 25.0 .9843 150.0000 5.906 150.0000 5.906 40.0000 1.574 1.2500 .0490 3 46000 Y 0.50
                List price:
                $304.84 /each.
                Your price::
                4056192 M370D032Z04A32WO08L200 M370D032Z04A32WO08L200   32.0000 1.260 18.0600 .7110 32.0 1.259 200.0000 7.874 200.0000 7.874 50.0000 1.968 1.2500 .0490 4 38700 Y 1.14
                  List price:
                  $346.91 /each.
                  Your price::
                  4056191 M370D032Z04A32WO08L150 M370D032Z04A32WO08L150   32.0000 1.260 18.1000 .7100 32.0 1.259 150.0000 5.906 150.0000 5.906 40.0000 1.574 1.2500 .0490 4 38700 Y 0.84
                    List price:
                    $324.17 /each.
                    Your price::
                    4170919 M370D025Z03A25WO08L200 M370D025Z03A25WO08L200   25.0000 .9840 11.3000 .4400 25.0 .9843 200.0000 7.874 200.0000 7.874 40.0000 1.575 1.2500 .0490 3 46000 Y 0.69
                      List price:
                      $327.58 /each.
                      Your price::
                      4056190 M370D028Z03A25WO08L200 M370D028Z03A25WO08L200   28.0000 1.102 14.1000 .5600 25.0 .9843 200.0000 7.874 200.0000 7.874 40.0000 1.575 1.2500 .0490 3 42400 Y 0.70
                        List price:
                        $340.10 /each.
                        Your price::
                        4008281 M370D025Z02A25WO08L200 M370D025Z02A25WO08L200   25.0000 .9840 11.2000 .4409 25.0 .9843 200.0000 7.874 200.0000 7.874 50.0000 1.968 1.2500 .0490 2 46000 Y 0.68
                          List price:
                          $321.89 /each.
                          Your price::
                          List price:
                          Discount: %
                          Your price::
                          Replacement This item is not available
                          Replacement Product This item may be available through a distributor

                          ORIGINAL PRODUCT

                          Fresas de alto avance • M370™ • IC08

                          Fresas de plato • Medianas • Sistema métrico
                          (9 Products)
                          • Fresado — lateral y planeadoFresado — lateral y planeado
                          • Perfilado 3DPerfilado 3D
                          • Fresado lateral/Fresado en escuadra: DesbasteFresado lateral/Fresado en escuadra: Desbaste
                          • Ranurado: Placa cuadradaRanurado: Placa cuadrada
                          • PlaneadoPlaneado
                          • Rectificado en rampa: Material en brutoRectificado en rampa: Material en bruto
                          • Mecanizado de alojamientosMecanizado de alojamientos
                          • Fresado helicoidalFresado helicoidal
                          • VaciadoVaciado
                          • Fresado — Con refrigeración internaFresado — Con refrigeración interna
                          View Products
                          SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D6] Hub Diameter [D6] Hub Diameter [L] Overall Length [L] Overall Length [L1] Gage Length [L1] Gage Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Max RPM Coolant Supply Weight Kilograms
                          4008276 M370D050Z05WO08 M370D050Z05WO08   50.0000 1.968 36.0000 1.420 22.0 .867 44.0000 1.732 40.0000 1.575 40.0000 1.575 1.2500 .0490 5 29200 Y 0.29