Witamy
Potwierdź swoje preferencje
Aktualizuj preferencje

Sugestie dotyczące produktów

Product Family suggestions

WIDIA do usług

Czy masz pytanie dotyczące konkretnego produktu?

Zobacz pełną listę światowych specjalistów ds. usług według obszaru wiedzy specjalistycznej

Szybkie zamówienie
Pozycje pomyślnie dodano do koszyka
Wyświetl koszyk

Seria M370™ została zaprojektowana z myślą o wysokiej produktywności przy dużych wartościach posuwu.

Seria M370™ została opracowana z myślą o pracy przy dużych wartościach posuwu. Koncepcja płytek dwustronnych wyposażonych w sześć krawędzi skrawających zapewnia stabilność oraz optymalną wydajność obróbki w połączeniu z efektywnym wykorzystaniem krawędzi skrawającej.

  • Bardzo wysoka wydajność obróbki
  • Pierwszy wybór do obróbki zgrubnej z wysokimi wartościami posuwu
  • Wewnętrzne doprowadzanie chłodziwa
  • Sześć krawędzi skrawających w każdej płytce
  • Wiele typów korpusów freza
Wybierz filtry
Filters
Filtry
Wyświetl filtry w
Metryczne
Calowe
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (85)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (80)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (85)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (85)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (85)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (85)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (85)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (85)
  • M Stainless Steel (85)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (85)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (85)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (85)
  • K Cast Iron (73)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (73)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (73)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (73)
  • N Non-Ferrous Materials (65)
    • N1
      Wrought Aluminum (65)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (65)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (65)
  • S High-Temp Alloys (83)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (81)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (81)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (81)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (83)
  • H Hardened Materials (67)
    • H1
      Hardened Materials 44-48 HRC (67)
Select All Star
  • CN (9)
  • DE (27)
  • GB (12)
  • IN (6)
  • SG (14)
  • US (24)
Applications
Applications
  • Chamfer Milling Chamfer Milling (2)
  • Face Milling Face Milling (60)
  • Pocket Pocket (60)
  • Pocket Helical Pocket Helical (58)
  • Pocket Milling Pocket Milling (60)
  • Pocket Plunge Milling Pocket Plunge Milling (59)
  • Profile Milling Profile Milling (60)
  • Ramping Ramping (60)
  • Shoulder Milling Shoulder Milling (58)
  • Shoulder Roughing Shoulder Roughing (58)
  • Slot Milling Slot Milling (58)
  • Slot Square End Slot Square End (1)
Cutting Diameter
Cutting Diameter
  • 0.441 in (3)
  • 0.445 in (3)
  • 0.457 in (3)
  • 0.461 in (1)
  • 0.555 in (1)
  • 0.702 in (2)
  • 0.711 in (1)
  • 0.713 in (2)
  • 0.717 in (1)
  • 0.838 in (2)
  • 0.95 in (1)
  • 0.954 in (2)
  • 1.024 in (1)
  • 1.028 in (1)
  • 1.102 in (1)
  • 1.303 in (1)
  • 1.335 in (2)
  • 1.383 in (1)
  • 1.417 in (2)
  • 1.449 in (2)
  • 1.499 in (2)
  • 1.815 in (2)
  • 1.835 in (2)
  • 1.931 in (1)
  • 1.932 in (1)
  • 1.949 in (1)
  • 2.043 in (1)
  • 2.273 in (1)
  • 2.329 in (1)
  • 2.334 in (3)
  • 2.449 in (1)
  • 2.483 in (2)
  • 2.598 in (1)
  • 3.27 in (2)
  • 3.333 in (2)
  • 4.255 in (2)
  • 4.333 in (1)
  • 5.333 in (1)
Cutting Diameter Min do Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 11.201 mm (3)
  • 11.3 mm (3)
  • 11.601 mm (3)
  • 11.701 mm (1)
  • 14.101 mm (1)
  • 17.8 mm (2)
  • 18.05 mm (1)
  • 18.1 mm (2)
  • 18.2 mm (1)
  • 21.276 mm (2)
  • 24.1 mm (1)
  • 24.201 mm (2)
  • 26.0 mm (1)
  • 26.1 mm (1)
  • 28.0 mm (1)
  • 33.1 mm (1)
  • 33.9 mm (2)
  • 35.1 mm (1)
  • 36.0 mm (2)
  • 36.801 mm (2)
  • 38.075 mm (2)
  • 46.1 mm (2)
  • 46.6 mm (2)
  • 49.051 mm (1)
  • 49.075 mm (1)
  • 49.5 mm (1)
  • 51.901 mm (1)
  • 57.7 mm (1)
  • 59.151 mm (1)
  • 59.276 mm (3)
  • 62.2 mm (1)
  • 63.075 mm (2)
  • 66.0 mm (1)
  • 83.051 mm (2)
  • 84.65 mm (2)
  • 108.051 mm (2)
  • 110.051 mm (1)
  • 135.451 mm (1)
Cutting Diameter Min do Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 25.0 mm (6)
  • 25.401 mm (4)
  • 28.0 mm (1)
  • 31.75 mm (2)
  • 32.0 mm (4)
  • 38.1 mm (5)
  • 40.0 mm (2)
  • 42.0 mm (1)
  • 50.0 mm (3)
  • 50.801 mm (4)
  • 52.0 mm (3)
  • 63.0 mm (3)
  • 63.5 mm (3)
  • 66.0 mm (2)
  • 76.2 mm (6)
  • 80.0 mm (3)
  • 100.0 mm (2)
  • 101.601 mm (2)
  • 125.0 mm (2)
  • 127.0 mm (1)
  • 152.4 mm (1)
Maximum Cutting Diameter Min do Maximum Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 0.984 in (6)
  • 1.0 in (4)
  • 1.102 in (1)
  • 1.25 in (2)
  • 1.26 in (4)
  • 1.5 in (5)
  • 1.575 in (2)
  • 1.655 in (1)
  • 1.969 in (3)
  • 2.0 in (4)
  • 2.047 in (3)
  • 2.48 in (3)
  • 2.5 in (3)
  • 2.598 in (2)
  • 3.0 in (6)
  • 3.15 in (3)
  • 3.938 in (2)
  • 4.0 in (2)
  • 4.921 in (2)
  • 5.0 in (1)
  • 6.0 in (1)
Maximum Cutting Diameter Min do Maximum Cutting Diameter Max
Cutting Length
Cutting Length
  • 1.25 mm (35)
  • 2.0 mm (25)
Cutting Length Min do Cutting Length Max
Cutting Length
Cutting Length
  • 0.049 in (35)
  • 0.079 in (25)
Cutting Length Min do Cutting Length Max
Reach
Reach
  • 1.379 in (3)
  • 1.5 in (7)
  • 1.575 in (15)
  • 1.69 in (1)
  • 1.693 in (2)
  • 1.75 in (3)
  • 1.969 in (18)
  • 1.971 in (1)
  • 2.0 in (5)
  • 2.375 in (2)
  • 2.48 in (2)
  • 2.5 in (1)
Reach Min do Reach Max
Reach
Reach
  • 35.0 mm (3)
  • 38.1 mm (7)
  • 40.0 mm (15)
  • 42.926 mm (1)
  • 43.0 mm (2)
  • 44.45 mm (3)
  • 50.0 mm (18)
  • 50.051 mm (1)
  • 50.801 mm (5)
  • 60.325 mm (2)
  • 63.0 mm (2)
  • 63.5 mm (1)
Reach Min do Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 12.0 (34)
  • 15.0 (24)
  • 75.0 (1)
  • 78.0 (1)
Tool Cutting Edge Angle Min do Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • 2 Key & Cutter Retention Screw (1)
  • 2 Key & Socket Head Cap Screw (1)
  • A-Socket Head Cap Screw (36)
  • Screw-On Connection (5)
  • Straight-Cylindrical (17)
Number of Flutes
Number of Flutes
  • 2 (7)
  • 3 (10)
  • 4 (11)
  • 5 (11)
  • 6 (11)
  • 7 (6)
  • 8 (2)
  • 9 (2)
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 1.575 in (9)
  • 1.75 in (3)
  • 1.969 in (16)
  • 1.971 in (1)
  • 2.0 in (5)
  • 2.244 in (3)
  • 2.375 in (2)
  • 2.48 in (2)
  • 2.657 in (2)
  • 5.906 in (2)
  • 6.0 in (5)
  • 7.686 in (1)
  • 7.875 in (4)
  • 8.0 in (2)
  • 10.0 in (1)
  • 11.811 in (2)
Over All Length [L] Min do Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 40.0 mm (9)
  • 44.45 mm (3)
  • 50.0 mm (16)
  • 50.051 mm (1)
  • 50.801 mm (5)
  • 57.0 mm (3)
  • 60.325 mm (2)
  • 63.0 mm (2)
  • 67.5 mm (2)
  • 150.0 mm (2)
  • 152.4 mm (5)
  • 195.201 mm (1)
  • 200.0 mm (4)
  • 203.201 mm (2)
  • 254.0 mm (1)
  • 300.0 mm (2)
Over All Length [L] Min do Over All Length [L] Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.048 in (47)
  • 0.05 in (40)
Corner Radius Min do Corner Radius Max
Corner Radius
Corner Radius
  • 1.225 mm (47)
  • 1.276 mm (40)
Corner Radius Min do Corner Radius Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • TN5515 (35)
  • TN6520 (35)
  • TN6525 (37)
  • TN6540 (37)
  • TN7535 (35)
  • WK15CM (62)
  • WP20CM (25)
  • WP25PM (65)
  • WP35CM (27)
  • WP40PM (65)
  • WS30PM (62)
  • WS40PM (65)
  • WU35PM (27)
Hand Of Tool
Hand Of Tool
  • R (60)
Wiper Insert
Wiper Insert
  • N (27)
Maximum Ramp Angle
Maximum Ramp Angle
  • 0.48 (1)
  • 0.5 (3)
  • 0.62 (1)
  • 0.66 (1)
  • 0.8 (1)
  • 0.81 (1)
  • 0.83 (3)
  • 0.84 (2)
  • 1.0 (3)
  • 1.01 (1)
  • 1.09 (2)
  • 1.3 (4)
  • 1.41 (6)
  • 1.46 (2)
  • 1.5 (3)
  • 1.73 (1)
  • 1.8 (2)
  • 1.9 (4)
  • 2.05 (3)
  • 2.09 (5)
  • 2.4 (1)
  • 2.5 (3)
  • 2.6 (1)
  • 3.5 (1)
  • 3.6 (2)
  • 3.7 (1)
  • 6.4 (2)
Maximum Ramp Angle Min do Maximum Ramp Angle Max
frontEnd
Insert Shape
Insert Shape
  • X-TRIGON WO_J 101.5 (77)
  • X-TRIGON WO_J 80 (45)
Neck Diameter
Neck Diameter
  • 0.828 in (1)
  • 0.843 in (3)
  • 0.866 in (3)
  • 0.906 in (1)
  • 1.093 in (2)
  • 1.143 in (3)
  • 1.196 in (1)
  • 1.324 in (1)
Neck Diameter Min do Neck Diameter Max
Neck Diameter
Neck Diameter
  • 21.0 mm (1)
  • 21.401 mm (3)
  • 22.0 mm (3)
  • 23.0 mm (1)
  • 27.75 mm (2)
  • 29.0 mm (3)
  • 30.375 mm (1)
  • 33.625 mm (1)
Neck Diameter Min do Neck Diameter Max
Center Cutting
Center Cutting
insertGeometry
Shape
Shape
  • X-TRIGON WO_J 101.5 (17)
  • X-TRIGON WO_J 80 (10)
Insert IC Size
Insert IC Size
  • 7.801 mm (12)
  • 12.0 mm (15)
Insert IC Size Min do Insert IC Size Max
Insert IC Size
Insert IC Size
  • 0.307 in (12)
  • 0.473 in (15)
Insert IC Size Min do Insert IC Size Max
Cutting Edge Length
Cutting Edge Length
  • 6.301 mm (12)
Cutting Edge Length Min do Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 0.248 in (12)
Cutting Edge Length Min do Cutting Edge Length Max
Chip Breaker CBMD
Chip Breaker CBMD
  • MH (12)
  • MM (12)
  • MR (3)
Cutting Tool Material
Cutting Tool Material
  • H W (27)
Tolerance Class
Tolerance Class
  • E (27)
backEnd
Connection Type
Connection Type
  • CYLINDRICAL (17)
  • SCREW-ON (5)
  • SHELL MILL (38)
Back-End Diameter
Back-End Diameter
  • 12.701 mm (1)
  • 16.0 mm (2)
  • 19.05 mm (3)
  • 19.1 mm (3)
  • 21.0 mm (3)
  • 22.0 mm (9)
  • 25.0 mm (5)
  • 25.401 mm (8)
  • 27.0 mm (5)
  • 29.0 mm (2)
  • 31.701 mm (2)
  • 31.75 mm (2)
  • 31.8 mm (2)
  • 32.0 mm (5)
  • 38.1 mm (5)
  • 40.0 mm (2)
  • 50.801 mm (1)
Back-End Diameter Min do Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.5 in (1)
  • 0.63 in (2)
  • 0.75 in (3)
  • 0.752 in (3)
  • 0.828 in (3)
  • 0.866 in (9)
  • 0.984 in (5)
  • 1.0 in (8)
  • 1.063 in (5)
  • 1.143 in (2)
  • 1.248 in (2)
  • 1.25 in (2)
  • 1.252 in (2)
  • 1.26 in (5)
  • 1.5 in (5)
  • 1.575 in (2)
  • 2.0 in (1)
Back-End Diameter Min do Back-End Diameter Max
No filters matching ""

M370™ Series • IC08 • Medium

(47) M370™ Series • IC08 • Medium

M370™ Series • IC12 • Large

(40) M370™ Series • IC12 • Large

MASZ DO NAS PYTANIA?

Nasz wykwalifikowany pesonel jest gotowy do pomocy.

Skontaktuj się z nami
product-image
Please adjust the following properties from

Oznaczenie katalogowe ISO

Oznaczenie katalogowe ANSI

to find similar products.

The following files are available

Please select a file to download

Models

Product data

I have read and accepted the Terms & Conditions of use

Can’t find the file type you’re looking for?

Masz zamiar utworzyć duplikat . Czy chcesz kontynuować?
Za chwilę usuniesz Czy chcesz kontynuować?
Za chwilę usuniesz and all items within that folder. Czy chcesz kontynuować?
Are you sure you want to permanently delete these items?
Na jaką nazwę chcesz zmienić swój ?

A folder with the name already exists .

Wprowadź prawidłową nazwę
Wprowadź nazwę duplikatu
Wprowadź prawidłową nazwę
Zamierzasz dodać do strony Moje rozwiązania. Czy chcesz kontynuować?

A folder with the name already exists .

Wprowadź prawidłową nazwę
Wyślij kopię

Oops, you have used your own email address! Please enter another email address to proceed.

An active user does not exist under that email address. Please Click Here , to send a registration invitation to


Wprowadź prawidłowy adres e-mail
Wprowadź prawidłową nazwę
Powinieneś być zalogowany, aby zobaczyć informacje o swoim pulpicie nawigacyjnym
Session expired due to inactivity, please login again
Produkty (), które próbowałeś dodać do koszyka, są niedostępne, skontaktuj się z działem obsługi klienta.
produkty dodane do koszyka
Wyświetl koszyk
DOWNLOAD TYPE:



. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number Oznaczenie katalogowe ISO Gatunek    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?