Witamy
Potwierdź swoje preferencje
Aktualizuj preferencje

Sugestie dotyczące produktów

Product Family suggestions

WIDIA do usług

Czy masz pytanie dotyczące konkretnego produktu?

Zobacz pełną listę światowych specjalistów ds. usług według obszaru wiedzy specjalistycznej

Szybkie zamówienie
Pozycje pomyślnie dodano do koszyka
Wyświetl koszyk

Osiągnij nowy poziom w dziedzinie frezowania z dużymi wartościami posuwu

Nowa seria VXF™ łączy w sobie najlepsze cechy okrągłych i kwadratowych płytek, aby zwiększyć wydajność obróbki, osiągnąć następny poziom frezowania z wysokimi wartościami posuwu i uczynić ją pierwszym wyborem w przypadku głębokich zagłębień.

Kąt 16,5º i specjalna geometria płytki redukują odkształcenia i wibracje, podczas gdy powierzchnie osiowe i promieniowe zapewniają gładkie wykończenie ścian i podłóg.

Dzięki dwóm dostępnym geometriom płytki, model -MM jest najlepszym rozwiązaniem do obróbki kieszeni i kształtowania miękkich stopów stali nierdzewnej, stopów żaroodpornych i -MH zapewnia lepszą ochronę krawędzi skrawającej podczas ciężkiej obróbki zgrubnej materiałów stalowych P3 i P4.

Frezarki VXF z wysokimi stopami doskonale nadają się do obróbki nawet 9 różnych typów obrabianych przedmiotów i 5 materiałów, co czyni je wszechstronnym rozwiązaniem dla różnych branż.

Właściwości i zalety

Wybierz filtry
Filters
Filtry
Wyświetl filtry w
Metryczne
Calowe
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (89)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (85)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (89)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (89)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (89)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (89)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (89)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (89)
  • M Stainless Steel (89)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (89)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (89)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (89)
  • K Cast Iron (83)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (83)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (83)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (83)
  • N Non-Ferrous Materials (82)
    • N1
      Wrought Aluminum (82)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (82)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (82)
  • S High-Temp Alloys (89)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (89)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (89)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (89)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (89)
  • H Hardened Materials (83)
    • H1
      Hardened Materials 44-48 HRC (83)
Select All Star
  • CN (22)
  • DE (22)
  • GB (10)
  • IN (8)
  • SG (9)
  • US (13)
Applications
Applications
  • Face Milling Face Milling (49)
  • Pocket Pocket (49)
  • Pocket Helical Pocket Helical (49)
  • Pocket Milling Pocket Milling (1)
  • Pocket Plunge Milling Pocket Plunge Milling (49)
  • Profile Milling Profile Milling (49)
  • Ramping Ramping (49)
  • Shoulder Milling Shoulder Milling (1)
  • Shoulder Roughing Shoulder Roughing (49)
  • Shoulder Square End Shoulder Square End (49)
  • Slot Milling Slot Milling (1)
  • Slot Square End Slot Square End (49)
Cutting Diameter
Cutting Diameter
  • 0.272 in (1)
  • 0.277 in (2)
  • 0.352 in (1)
  • 0.384 in (2)
  • 0.421 in (2)
  • 0.446 in (4)
  • 0.462 in (3)
  • 0.536 in (2)
  • 0.546 in (1)
  • 0.616 in (2)
  • 0.632 in (2)
  • 0.711 in (3)
  • 0.72 in (5)
  • 0.785 in (1)
  • 0.839 in (1)
  • 0.86 in (1)
  • 0.879 in (2)
  • 0.889 in (1)
  • 0.939 in (1)
  • 0.96 in (2)
  • 1.034 in (2)
  • 1.072 in (1)
  • 1.103 in (1)
  • 1.113 in (2)
  • 1.129 in (1)
  • 1.204 in (1)
  • 1.254 in (1)
  • 1.284 in (2)
  • 1.332 in (1)
  • 1.347 in (1)
  • 1.426 in (1)
  • 1.458 in (2)
  • 1.506 in (1)
  • 1.583 in (1)
  • 1.597 in (1)
  • 1.602 in (1)
  • 1.629 in (1)
  • 1.764 in (1)
  • 1.784 in (2)
  • 1.883 in (1)
  • 1.938 in (1)
  • 2.102 in (1)
  • 2.251 in (1)
  • 2.283 in (2)
  • 2.433 in (1)
  • 3.036 in (1)
  • 3.099 in (1)
  • 3.221 in (1)
  • 3.283 in (2)
  • 4.021 in (1)
  • 4.098 in (1)
  • 4.284 in (1)
Cutting Diameter Min do Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 6.9 mm (1)
  • 7.025 mm (2)
  • 8.951 mm (1)
  • 9.75 mm (2)
  • 10.701 mm (2)
  • 11.326 mm (4)
  • 11.726 mm (3)
  • 13.625 mm (2)
  • 13.875 mm (1)
  • 15.65 mm (2)
  • 16.05 mm (2)
  • 18.05 mm (3)
  • 18.3 mm (5)
  • 19.951 mm (1)
  • 21.3 mm (1)
  • 21.85 mm (1)
  • 22.326 mm (2)
  • 22.576 mm (1)
  • 23.826 mm (1)
  • 24.375 mm (2)
  • 26.276 mm (2)
  • 27.225 mm (1)
  • 28.026 mm (1)
  • 28.276 mm (2)
  • 28.675 mm (1)
  • 30.576 mm (1)
  • 31.826 mm (1)
  • 32.625 mm (2)
  • 33.825 mm (1)
  • 34.225 mm (1)
  • 36.225 mm (1)
  • 37.025 mm (2)
  • 38.225 mm (1)
  • 40.2 mm (1)
  • 40.575 mm (1)
  • 40.7 mm (1)
  • 41.375 mm (1)
  • 44.801 mm (1)
  • 45.301 mm (2)
  • 47.801 mm (1)
  • 49.225 mm (1)
  • 53.401 mm (1)
  • 57.176 mm (1)
  • 58.0 mm (2)
  • 61.801 mm (1)
  • 77.125 mm (1)
  • 78.726 mm (1)
  • 81.801 mm (1)
  • 83.4 mm (2)
  • 102.125 mm (1)
  • 104.101 mm (1)
  • 108.801 mm (1)
Cutting Diameter Min do Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 15.875 mm (1)
  • 16.0 mm (2)
  • 18.0 mm (1)
  • 19.05 mm (2)
  • 20.0 mm (2)
  • 25.0 mm (6)
  • 25.401 mm (5)
  • 31.75 mm (7)
  • 32.0 mm (7)
  • 35.0 mm (1)
  • 38.1 mm (4)
  • 40.0 mm (4)
  • 42.0 mm (3)
  • 50.0 mm (5)
  • 50.801 mm (6)
  • 52.0 mm (2)
  • 63.0 mm (3)
  • 63.5 mm (3)
  • 66.0 mm (1)
  • 76.2 mm (3)
  • 80.0 mm (2)
  • 100.0 mm (2)
  • 101.601 mm (3)
  • 125.0 mm (1)
  • 127.0 mm (2)
Maximum Cutting Diameter Min do Maximum Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 0.625 in (1)
  • 0.63 in (2)
  • 0.709 in (1)
  • 0.75 in (2)
  • 0.787 in (2)
  • 0.984 in (6)
  • 1.0 in (5)
  • 1.25 in (7)
  • 1.26 in (7)
  • 1.379 in (1)
  • 1.5 in (4)
  • 1.575 in (4)
  • 1.655 in (3)
  • 1.969 in (5)
  • 2.0 in (6)
  • 2.047 in (2)
  • 2.48 in (3)
  • 2.5 in (3)
  • 2.598 in (1)
  • 3.0 in (3)
  • 3.15 in (2)
  • 3.938 in (2)
  • 4.0 in (3)
  • 4.921 in (1)
  • 5.0 in (2)
Maximum Cutting Diameter Min do Maximum Cutting Diameter Max
Cutting Length
Cutting Length
  • 0.9 mm (19)
  • 1.5 mm (28)
  • 2.5 mm (20)
  • 2.7 mm (1)
  • 3.5 mm (10)
Cutting Length Min do Cutting Length Max
Cutting Length
Cutting Length
  • 0.035 in (19)
  • 0.06 in (28)
  • 0.098 in (20)
  • 0.106 in (1)
  • 0.138 in (10)
Cutting Length Min do Cutting Length Max
Reach
Reach
  • 0.984 in (3)
  • 1.26 in (8)
  • 1.379 in (5)
  • 1.575 in (28)
  • 1.693 in (7)
  • 1.7 in (1)
  • 1.772 in (3)
  • 1.969 in (12)
  • 2.0 in (1)
  • 2.48 in (4)
  • 2.5 in (1)
  • 2.757 in (1)
  • 3.0 in (1)
  • 3.5 in (3)
Reach Min do Reach Max
Reach
Reach
  • 25.0 mm (3)
  • 32.0 mm (8)
  • 35.0 mm (5)
  • 40.0 mm (28)
  • 43.0 mm (7)
  • 43.176 mm (1)
  • 45.0 mm (3)
  • 50.0 mm (12)
  • 50.801 mm (1)
  • 63.0 mm (4)
  • 63.5 mm (1)
  • 70.0 mm (1)
  • 76.2 mm (1)
  • 88.9 mm (3)
Reach Min do Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 10.0 (8)
  • 11.0 (4)
  • 12.0 (18)
  • 14.0 (28)
  • 16.0 (12)
  • 18.0 (1)
  • 79.0 (2)
  • 80.0 (5)
Tool Cutting Edge Angle Min do Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • A-Socket Head Cap Screw (43)
  • Screw-On Connection (14)
  • Straight-Cylindrical (16)
  • Weldon (5)
Number of Flutes
Number of Flutes
  • 10 (2)
  • 2 (6)
  • 3 (16)
  • 4 (17)
  • 5 (18)
  • 6 (9)
  • 7 (6)
  • 8 (3)
  • 9 (1)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 4.0 (90)
Cutting Edges Per Insert Min do Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 1.26 in (7)
  • 1.575 in (20)
  • 1.681 in (1)
  • 1.772 in (3)
  • 1.969 in (9)
  • 2.165 in (2)
  • 2.244 in (3)
  • 2.48 in (4)
  • 2.657 in (7)
  • 2.664 in (1)
  • 3.781 in (2)
  • 3.856 in (3)
  • 7.0 in (1)
  • 7.087 in (2)
  • 7.48 in (1)
  • 7.5 in (1)
  • 7.875 in (6)
  • 8.0 in (3)
  • 9.843 in (1)
  • 10.0 in (1)
Over All Length [L] Min do Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 32.0 mm (7)
  • 40.0 mm (20)
  • 42.7 mm (1)
  • 45.0 mm (3)
  • 50.0 mm (9)
  • 55.0 mm (2)
  • 57.0 mm (3)
  • 63.0 mm (4)
  • 67.5 mm (7)
  • 67.675 mm (1)
  • 96.0 mm (2)
  • 97.95 mm (3)
  • 177.8 mm (1)
  • 180.0 mm (2)
  • 190.0 mm (1)
  • 190.5 mm (1)
  • 200.0 mm (6)
  • 203.201 mm (3)
  • 250.0 mm (1)
  • 254.0 mm (1)
Over All Length [L] Min do Over All Length [L] Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.031 in (21)
  • 0.039 in (21)
  • 0.047 in (54)
  • 0.06 in (22)
  • 0.063 in (12)
Corner Radius Min do Corner Radius Max
Corner Radius
Corner Radius
  • 0.8 mm (21)
  • 1.0 mm (21)
  • 1.201 mm (54)
  • 1.5 mm (22)
  • 1.6 mm (12)
Corner Radius Min do Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (90)
Corner Chamfer Min do Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (90)
Corner Chamfer Min do Corner Chamfer Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • WP25PM (82)
  • WP40PM (71)
  • WS40PM (82)
  • WU10PM (20)
Hand Of Tool
Hand Of Tool
  • R (78)
Wiper Insert
Wiper Insert
  • N (12)
Maximum Ramp Angle
Maximum Ramp Angle
  • 0.24 (1)
  • 0.3 (1)
  • 0.31 (2)
  • 0.32 (1)
  • 0.37 (1)
  • 0.42 (1)
  • 0.45 (2)
  • 0.5 (3)
  • 0.51 (1)
  • 0.58 (1)
  • 0.6 (3)
  • 0.65 (1)
  • 0.7 (7)
  • 0.8 (4)
  • 0.86 (1)
  • 0.9 (3)
  • 0.95 (1)
  • 1.0 (4)
  • 1.1 (2)
  • 1.3 (1)
  • 1.33 (1)
  • 1.36 (2)
  • 1.4 (2)
  • 1.5 (8)
  • 1.8 (1)
  • 2.2 (3)
  • 2.6 (2)
  • 2.69 (2)
  • 2.7 (3)
  • 2.8 (4)
  • 3.4 (2)
  • 4.34 (1)
  • 5.4 (1)
  • 5.9 (2)
  • 6.74 (2)
  • 8.2 (1)
Maximum Ramp Angle Min do Maximum Ramp Angle Max
frontEnd
Adapter Front-End
Adapter Front-End
  • SCREW-ON ADAPTER (37)
Front End Type
Front End Type
  • ZYL - Cylindrical Adapter (37)
Insert Shape
Insert Shape
  • S-SQUARE 90 (90)
Front End Style
Front End Style
  • ZYL03 Attachment Thread (37)
Gage Length
Gage Length
  • 3.346 in (1)
  • 3.465 in (1)
  • 3.543 in (2)
  • 4.134 in (1)
  • 4.252 in (1)
  • 4.331 in (3)
  • 4.921 in (1)
  • 5.039 in (1)
  • 5.118 in (2)
  • 5.157 in (2)
  • 5.827 in (1)
  • 5.906 in (1)
  • 6.142 in (2)
  • 6.299 in (2)
  • 6.614 in (1)
  • 6.694 in (3)
  • 7.126 in (2)
  • 8.11 in (2)
  • 8.268 in (2)
  • 9.094 in (2)
  • 10.236 in (2)
  • 12.205 in (2)
Gage Length
Gage Length
  • 110 mm (3)
  • 170 mm (3)
  • 130 mm (2)
  • 131 mm (2)
  • 156 mm (2)
  • 160 mm (2)
  • 181 mm (2)
  • 206 mm (2)
  • 210 mm (2)
  • 231 mm (2)
  • 260 mm (2)
  • 310 mm (2)
  • 90 mm (2)
  • 105 mm (1)
  • 108 mm (1)
  • 125 mm (1)
  • 128 mm (1)
  • 148 mm (1)
  • 150 mm (1)
  • 168 mm (1)
  • 85 mm (1)
  • 88 mm (1)
Front End Size
Front End Size
  • 0.02 in (3)
  • 0.028 in (3)
  • 0.033 in (10)
  • 0.045 in (8)
Front End Size Min do Front End Size Max
Front End Size
Front End Size
  • 13.0 mm (3)
  • 18.0 mm (3)
  • 21.0 mm (10)
  • 28.975 mm (2)
  • 29.0 mm (6)
Front End Size Min do Front End Size Max
Neck Diameter
Neck Diameter
  • 0.335 in (1)
  • 0.414 in (1)
  • 0.492 in (1)
  • 0.511 in (1)
  • 0.531 in (1)
  • 0.61 in (1)
  • 0.652 in (1)
  • 0.669 in (1)