TopGroove™
Filtry
Filtry
Wyświetl filtry w
MetryczneCalowe
Workpiece Material
Workpiece Material
- P Steel (463)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(463)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(463)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(463)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(463)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(463)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(463)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(463)
- M Stainless Steel (475)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(475)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(475)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(475)
- K Cast Iron (463)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(463)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(463)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(463)
- N Non-Ferrous Materials (475)
- N1Wrought Aluminum (475)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(475)
- N3High-Silicon Aluminum Alloys Si >12.2%(475)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (110)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (475)
- N6Carbon, Graphite Composites, CFRP (475)
- N7MMC's (110)
- S High-Temp Alloys (475)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(475)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(475)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(475)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(475)
- H Hardened Materials (108)
- H1Hardened Materials 44-48 HRC(108)
- H2Hardened Materials 48-55 HRC(108)
- H3Hardened Materials 56-60 HRC(98)
- H4Hardened Materials >60 HRC(98)
Select All Star
- DE (15)
- IN (3)
- US (190)
Applications
Applications
Boring (3)
Face Grooving (426)
Grooving (422)
ID Grooving (305)
ID Thread Turning (44)
OD Thread Turning (67)
Plunge Turning (264)
Profiling (82)
Turning (3)
Type of Thread
Type of Thread
- 60 (107)
- ACME (66)
- API RD (45)
- BSW (23)
- BUTTRESS (22)
- STUB ACME (45)
- UN (93)
- UNJ (23)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (450)
- Lightly Interrupted Cut (450)
- Smooth Cut (466)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 90.0 (111)
do
Connection Style
Connection Style
- Boring Bar Shank (44)
- Toolholder (47)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (174)
- 2.0 (403)
do
Over All Length [L]
Over All Length [L]
- 63.5 mm(1)
- 80.0 mm(1)
- 88.9 mm(1)
- 100.0 mm(1)
- 101.6 mm(2)
- 114.3 mm(9)
- 125.0 mm(8)
- 127.0 mm(9)
- 150.0 mm(18)
- 152.4 mm(22)
- 170.0 mm(2)
- 180.0 mm(2)
- 200.0 mm(4)
- 203.2 mm(3)
- 250.0 mm(2)
- 254.0 mm(5)
- 300.0 mm(3)
- 304.8 mm(6)
- 350.0 mm(1)
- 355.6 mm(7)
- 406.4 mm(4)
do
Corner Radius
Corner Radius
- 0.075 mm(73)
- 0.1 mm(117)
- 0.15 mm(9)
- 0.175 mm(97)
- 0.2 mm(280)
- 0.225 mm(23)
- 0.25 mm(23)
- 0.3 mm(23)
- 0.325 mm(76)
- 0.35 mm(46)
- 0.4 mm(45)
- 0.5 mm(43)
- 0.575 mm(100)
- 0.75 mm(43)
- 0.775 mm(100)
- 1.0 mm(91)
- 1.2 mm(94)
- 1.25 mm(64)
- 1.5 mm(90)
- 1.575 mm(49)
- 1.6 mm(76)
- 1.75 mm(88)
- 1.975 mm(48)
- 2.0 mm(58)
- 2.25 mm(47)
- 2.4 mm(59)
- 2.5 mm(20)
- 3.175 mm(24)
do
Corner Chamfer
Corner Chamfer
- 0.0 mm(365)
do
application
Grade Of Cutting Tool
Grade Of Cutting Tool
- THM (95)
- TN6010 (231)
- TN6025 (337)
- WU10HT (24)
- WU10PT (35)
- WU25PT (23)
Hand Of Tool
Hand Of Tool
- L (34)
- R (57)
Wiper Insert
Wiper Insert
- N (475)
F Dimension
F Dimension
- 6.553 mm(2)
- 7.0 mm(2)
- 10.312 mm(1)
- 11.0 mm(4)
- 11.1 mm(2)
- 12.0 mm(1)
- 12.7 mm(5)
- 13.0 mm(2)
- 14.27 mm(1)
- 14.275 mm(2)
- 15.875 mm(3)
- 16.0 mm(2)
- 16.256 mm(2)
- 17.0 mm(4)
- 17.475 mm(2)
- 17.48 mm(2)
- 19.05 mm(1)
- 19.431 mm(1)
- 20.0 mm(1)
- 22.0 mm(2)
- 22.225 mm(2)
- 25.0 mm(3)
- 25.4 mm(8)
- 27.0 mm(3)
- 31.75 mm(16)
- 32.0 mm(7)
- 32.537 mm(1)
- 34.925 mm(2)
- 35.0 mm(1)
- 38.1 mm(4)
- 40.0 mm(2)
do
Minimum Bore Diameter
Minimum Bore Diameter
- 11.176 mm(2)
- 11.5 mm(2)
- 18.5 mm(2)
- 18.542 mm(2)
- 20.32 mm(1)
- 22.0 mm(2)
- 25.4 mm(2)
- 26.0 mm(2)
- 28.575 mm(1)
- 28.58 mm(1)
- 34.0 mm(4)
- 34.92 mm(2)
- 34.925 mm(2)
- 44.0 mm(2)
- 44.45 mm(2)
- 50.8 mm(2)
- 54.0 mm(3)
- 57.15 mm(3)
- 60.325 mm(1)
- 63.5 mm(3)
- 69.85 mm(2)
- 70.0 mm(1)
do
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.0 mm(55)
- 11.176 mm(2)
- 11.5 mm(2)
- 18.5 mm(2)
- 18.542 mm(2)
- 20.32 mm(1)
- 22.0 mm(2)
- 25.4 mm(2)
- 26.0 mm(2)
- 28.575 mm(1)
- 28.58 mm(1)
- 34.0 mm(4)
- 34.92 mm(2)
- 34.925 mm(2)
- 41.3 mm(29)
- 44.0 mm(2)
- 44.45 mm(2)
- 47.6 mm(27)
- 50.8 mm(2)
- 54.0 mm(3)
- 55.88 mm(1)
- 56.625 mm(3)
- 57.15 mm(3)
- 57.2 mm(12)
- 60.325 mm(2)
- 63.5 mm(7)
- 69.85 mm(2)
- 70.0 mm(1)
- 76.2 mm(1)
- 88.9 mm(139)
- 139.7 mm(165)
- 174.6 mm(57)
- 209.6 mm(43)
- 222.3 mm(26)
do
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 9999.0 mm(471)
do
Cutting Direction
Cutting Direction
- E (51)
- S (40)
Rake Angle Style
Rake Angle Style
- NEUTRAL (ZERO) (91)
Maximum Bore Depth
Maximum Bore Depth
- 25.4 mm(7)
- 31.26 mm(1)
- 31.3 mm(1)
- 32.766 mm(1)
- 38.1 mm(1)
- 48.0 mm(2)
- 50.8 mm(15)
- 63.5 mm(3)
- 64.0 mm(2)
- 76.2 mm(2)
- 80.0 mm(2)
- 100.0 mm(4)
- 101.6 mm(6)
- 127.0 mm(3)
- 128.0 mm(2)
- 152.4 mm(2)
- 160.0 mm(3)
- 177.8 mm(2)
- 200.0 mm(1)
- 203.2 mm(4)
do
Boring Bar Material
Boring Bar Material
- S (44)
frontEnd
Clamp Style
Clamp Style
- N (111)
Cutting Width
Cutting Width
- 0.5 mm(42)
- 0.787 mm(46)
- 0.8 mm(43)
- 1.0 mm(93)
- 1.041 mm(24)
- 1.19 mm(41)
- 1.194 mm(82)
- 1.2 mm(90)
- 1.4 mm(43)
- 1.473 mm(41)
- 1.5 mm(97)
- 1.57 mm(70)
- 1.575 mm(119)
- 1.7 mm(42)
- 1.75 mm(88)
- 1.829 mm(47)
- 1.95 mm(43)
- 1.981 mm(49)
- 2.0 mm(109)
- 2.2 mm(88)
- 2.236 mm(25)
- 2.25 mm(65)
- 2.387 mm(25)
- 2.388 mm(114)
- 2.39 mm(25)
- 2.5 mm(99)
- 2.75 mm(90)
- 3.0 mm(116)
- 3.17 mm(49)
- 3.175 mm(141)
- 3.18 mm(10)
- 3.2 mm(47)
- 3.245 mm(41)
- 3.25 mm(23)
- 3.5 mm(102)
- 3.82 mm(25)
- 3.84 mm(41)
- 3.96 mm(26)
- 3.962 mm(49)
- 4.0 mm(77)
- 4.25 mm(24)
- 4.5 mm(70)
- 4.775 mm(48)
- 4.788 mm(11)
- 4.8 mm(49)
- 4.801 mm(77)
- 4.88 mm(25)
- 4.953 mm(24)
- 4.978 mm(47)
- 5.0 mm(22)
- 5.5 mm(10)
- 6.0 mm(10)
- 6.35 mm(30)
- 6.36 mm(10)
do
Insert Size
Insert Size
- 1 (6)
- 2 (41)
- 3 (47)
- 4 (15)
- 6 (2)
Maximum Cutting Depth
Maximum Cutting Depth
- 1.69 mm(1)
- 3.505 mm(12)
- 3.51 mm(11)
- 5.33 mm(8)
- 5.334 mm(20)
- 5.715 mm(1)
- 7.468 mm(8)
- 7.47 mm(5)
- 8.484 mm(2)
do
Maximum Cutting Insert Depth
Maximum Cutting Insert Depth
- 0.64 mm(3)
- 0.76 mm(3)
- 0.762 mm(27)
- 1.015 mm(2)
- 1.016 mm(49)
- 1.02 mm(4)
- 1.09 mm(9)
- 1.092 mm(33)
- 1.335 mm(3)
- 1.97 mm(2)
- 1.981 mm(2)
- 2.54 mm(3)
- 2.75 mm(2)
- 2.92 mm(9)
- 2.921 mm(23)
- 3.81 mm(12)
- 3.84 mm(2)
- 3.86 mm(1)
do
insertGeometry
Shape
Shape
- TN-TOP NOTCH (365)
Insert Seat Size
Insert Seat Size
- 1 (3)
- 2 (119)
- 3 (192)
- 4 (51)
Cutting Tool Material
Cutting Tool Material
- H W (475)
backEnd
Connection Type
Connection Type
- BORING BAR (44)
- SQUARE SHANK (47)
Back-End Diameter
Back-End Diameter
- 9.525 mm(1)
- 10.0 mm(1)
- 12.0 mm(3)
- 12.7 mm(3)
- 15.875 mm(3)
- 16.0 mm(2)
- 19.05 mm(2)
- 20.0 mm(2)
- 25.0 mm(4)
- 25.4 mm(6)
- 31.75 mm(3)
- 32.0 mm(2)
- 38.1 mm(2)
- 40.0 mm(3)
- 44.45 mm(2)
- 50.0 mm(1)
- 50.8 mm(4)
do
Shank Height
Shank Height
- 9.525 mm(1)
- 12.0 mm(2)
- 12.7 mm(4)
- 15.875 mm(3)
- 16.0 mm(2)
- 19.05 mm(6)
- 20.0 mm(4)
- 25.0 mm(6)
- 25.4 mm(12)
- 31.75 mm(5)
- 32.0 mm(2)
do
Shank Width
Shank Width
- 9.525 mm(1)
- 12.0 mm(2)
- 12.7 mm(4)
- 15.875 mm(3)
- 16.0 mm(2)
- 19.05 mm(6)
- 20.0 mm(4)
- 25.0 mm(6)
- 25.4 mm(13)
- 31.75 mm(4)
- 32.0 mm(2)
do
No filters matching ""
