Witamy
Potwierdź swoje preferencje
Aktualizuj preferencje

Sugestie dotyczące produktów

Product Family suggestions

WIDIA do usług

Czy masz pytanie dotyczące konkretnego produktu?

Zobacz pełną listę światowych specjalistów ds. usług według obszaru wiedzy specjalistycznej

Szybkie zamówienie
Pozycje pomyślnie dodano do koszyka
Wyświetl koszyk
Wróć

Edytuj

Dodaj

Nazwa : {{SolutionName}}

Seria GT

Wybierz filtry
Filters
Filtry
Filtry
Wyświetl filtry w
Metryczne
Calowe
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (231)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (163)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (178)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (178)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (92)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (53)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (92)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (53)
  • M Stainless Steel (214)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (178)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (107)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (143)
  • K Cast Iron (54)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (54)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (54)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (19)
  • N Non-Ferrous Materials (174)
    • N1
      Wrought Aluminum
      (120)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (174)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (43)
  • S High-Temp Alloys (311)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (92)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (136)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (136)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (83)
  • H Hardened Materials (10)
    • H1
      Hardened Materials 44-48 HRC
      (10)
    • H2
      Hardened Materials 48-55 HRC
      (10)
Select All Star
  • US (129)
Applications
Applications
  • Tapping Blind Hole Tapping Blind Hole (380)
  • Tapping Through Hole Tapping Through Hole (335)
  • Threading Threading (741)
Cutting Length
Cutting Length
  • 6.0 mm (4)
  • 7.0 mm (4)
  • 7.9 mm (18)
  • 8.0 mm (20)
  • 8.1 mm (8)
  • 9.0 mm (6)
  • 9.1 mm (17)
  • 10.0 mm (66)
  • 10.5 mm (1)
  • 10.9 mm (2)
  • 11.0 mm (10)
  • 11.101 mm (29)
  • 11.201 mm (8)
  • 11.601 mm (10)
  • 11.8 mm (8)
  • 11.9 mm (4)
  • 12.0 mm (40)
  • 12.101 mm (11)
  • 12.201 mm (3)
  • 12.4 mm (28)
  • 12.701 mm (4)
  • 13.0 mm (28)
  • 13.101 mm (4)
  • 13.4 mm (9)
  • 14.0 mm (17)
  • 14.201 mm (14)
  • 14.9 mm (1)
  • 15.0 mm (69)
  • 15.101 mm (25)
  • 15.201 mm (10)
  • 16.0 mm (33)
  • 17.0 mm (7)
  • 18.0 mm (50)
  • 19.0 mm (5)
  • 19.6 mm (31)
  • 20.0 mm (33)
  • 21.0 mm (7)
  • 21.1 mm (3)
  • 22.0 mm (19)
  • 23.0 mm (6)
  • 23.1 mm (15)
  • 24.0 mm (5)
  • 25.0 mm (9)
  • 25.401 mm (14)
  • 26.0 mm (3)
  • 27.0 mm (5)
  • 30.0 mm (6)
  • 31.8 mm (4)
  • 32.0 mm (3)
  • 33.301 mm (1)
  • 35.0 mm (2)
  • 40.0 mm (1)
  • 40.401 mm (1)
Cutting Length Min do Cutting Length Max
Cutting Length
Cutting Length
  • 0.237 in (4)
  • 0.276 in (4)
  • 0.311 in (18)
  • 0.315 in (20)
  • 0.319 in (8)
  • 0.354 in (6)
  • 0.358 in (17)
  • 0.394 in (66)
  • 0.414 in (1)
  • 0.429 in (2)
  • 0.433 in (10)
  • 0.437 in (29)
  • 0.441 in (8)
  • 0.457 in (10)
  • 0.465 in (8)
  • 0.47 in (4)
  • 0.473 in (40)
  • 0.477 in (11)
  • 0.48 in (3)
  • 0.488 in (28)
  • 0.5 in (4)
  • 0.512 in (28)
  • 0.516 in (4)
  • 0.528 in (9)
  • 0.551 in (17)
  • 0.559 in (14)
  • 0.587 in (1)
  • 0.591 in (69)
  • 0.595 in (25)
  • 0.598 in (10)
  • 0.63 in (33)
  • 0.669 in (7)
  • 0.709 in (50)
  • 0.748 in (5)
  • 0.772 in (31)
  • 0.787 in (33)
  • 0.828 in (7)
  • 0.832 in (3)
  • 0.866 in (19)
  • 0.906 in (6)
  • 0.909 in (15)
  • 0.946 in (5)
  • 0.984 in (9)
  • 1.0 in (14)
  • 1.024 in (3)
  • 1.063 in (5)
  • 1.181 in (6)
  • 1.252 in (4)
  • 1.26 in (3)
  • 1.311 in (1)
  • 1.379 in (2)
  • 1.575 in (1)
  • 1.591 in (1)
Cutting Length Min do Cutting Length Max
Thread Size
Thread Size
  • 1 - 8 (4)
  • 1/2 - 13 (21)
  • 1/2 - 20 (15)
  • 1/4 - 20 (28)
  • 1/4 - 28 (19)
  • 10 - 24 (19)
  • 10 - 32 (26)
  • 2 - 56 (11)
  • 3/4 - 10 (10)
  • 3/4 - 16 (6)
  • 3/8 - 16 (29)
  • 3/8 - 24 (14)
  • 4 - 40 (17)
  • 4 - 48 (2)
  • 5 - 40 (7)
  • 5/16 - 18 (23)
  • 5/16 - 24 (16)
  • 5/16- 24 (1)
  • 5/8 - 11 (11)
  • 5/8 - 18 (6)
  • 6 - 32 (19)
  • 6 - 40 (4)
  • 7/16 - 14 (11)
  • 7/16 - 20 (12)
  • 8 - 32 (19)
  • 8 - 36 (4)
  • 9/16 - 18 (2)
  • M10 X 1 (10)
  • M10 X 1,25 (12)
  • M10 X 1,5 (35)
  • M12 X 1,25 (9)
  • M12 X 1,5 (15)
  • M12 X 1,75 (32)
  • M14 X 1,5 (14)
  • M14 X 2 (15)
  • M16 X 1,5 (14)
  • M16 X 2 (20)
  • M18 X 1,5 (3)
  • M18 X 2 (2)
  • M18 X 2,5 (1)
  • M2,5 X 0,45 (5)
  • M20 X 2,5 (10)
  • M24 X 3 (4)
  • M3 X 0,5 (24)
  • M3,5 X 0,6 (3)
  • M30 X 3,5 (2)
  • M36 X 4 (1)
  • M4 X 0,7 (26)
  • M5 X 0,8 (32)
  • M6 X 1 (40)
  • M7 X 1 (5)
  • M8 X 1 (12)
  • M8 X 1,25 (39)
Thread Tolerance Class ANSI
Thread Tolerance Class ANSI
  • 2BX (33)
  • 3BX (72)
Thread Tolerance Class ISO
Thread Tolerance Class ISO
  • 6H-I (50)
  • 6HX-I (231)
Tap PD Class
Tap PD Class
  • D10 (3)
  • D11 (3)
  • D12 (1)
  • D3 (13)
  • D4 (19)
  • D5 (34)
  • D6 (18)
  • D7 (2)
  • D8 (3)
  • D9 (8)
  • H2 (31)
  • H3 (147)
  • H4 (15)
  • H5 (42)
  • H6 (10)
  • H7 (6)
Connection Style
Connection Style
  • Cylindrical with Drive Square (733)
Number of Flutes
Number of Flutes
  • 0 (3)
  • 2 (97)
  • 3 (391)
  • 4 (156)
  • 5 (39)
  • 6 (55)
Internal Coolant Capability
Internal Coolant Capability
application
Coating
Coating
  • CrC/C (107)
  • TiCN (90)
  • Uncoated (1)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • WH36MG (17)
  • WN35MG (8)
  • WN38MG (26)
  • WN44EG (79)
  • WN48EG (15)
  • WP31MG (51)
  • WS30MG (10)
  • WS32MG (16)
  • WS34MG (172)
  • WS39MG (101)
  • WU32MG (246)
Tap Standard
Tap Standard
  • ANSI (319)
  • DIN 2174 (41)
  • DIN 371 (93)
  • DIN 374 (54)
  • DIN 376 (68)
  • DIN-ANSI (150)
Tap Type
Tap Type
  • 11 (33)
  • 13 (64)
  • 3 (112)
  • 8 (532)
frontEnd
Thread TPI
Thread TPI
  • 8.0 mm (4)
  • 10.0 mm (10)
  • 11.0 mm (11)
  • 13.0 mm (21)
  • 14.0 mm (11)
  • 16.0 mm (35)
  • 18.0 mm (31)
  • 20.0 mm (55)
  • 24.0 mm (50)
  • 28.0 mm (19)
  • 32.0 mm (64)
  • 36.0 mm (4)
  • 40.0 mm (28)
  • 48.0 mm (2)
  • 56.0 mm (11)
Thread TPI Min do Thread TPI Max
Thread TPI
Thread TPI
  • 0.315 in (4)
  • 0.394 in (10)
  • 0.433 in (11)
  • 0.512 in (21)
  • 0.551 in (11)
  • 0.63 in (35)
  • 0.709 in (31)
  • 0.787 in (55)
  • 0.946 in (50)
  • 1.102 in (19)
  • 1.26 in (64)
  • 1.417 in (4)
  • 1.575 in (28)
  • 1.891 in (2)
  • 2.205 in (11)
Thread TPI Min do Thread TPI Max
Thread Pitch
Thread Pitch
  • 0.45 mm (5)
  • 0.5 mm (24)
  • 0.601 mm (3)
  • 0.701 mm (26)
  • 0.8 mm (32)
  • 1.0 mm (68)
  • 1.25 mm (59)
  • 1.5 mm (81)
  • 1.75 mm (32)
  • 2.0 mm (37)
  • 2.5 mm (11)
  • 3.0 mm (4)
  • 3.5 mm (2)
  • 4.0 mm (1)
Thread Pitch Min do Thread Pitch Max
Thread Pitch
Thread Pitch
  • 0.019 in (5)
  • 0.02 in (24)
  • 0.024 in (3)
  • 0.028 in (26)
  • 0.031 in (32)
  • 0.039 in (68)
  • 0.049 in (59)
  • 0.06 in (81)
  • 0.069 in (32)
  • 0.079 in (37)
  • 0.098 in (11)
  • 0.119 in (4)
  • 0.138 in (2)
  • 0.157 in (1)
Thread Pitch Min do Thread Pitch Max
Chamfer Form
Chamfer Form
  • FB (87)
  • PC (309)
  • SB (345)
backEnd
Back-End Diameter
Back-End Diameter
  • 3.5 mm (11)
  • 3.575 mm (81)
  • 4.275 mm (36)
  • 4.5 mm (13)
  • 4.926 mm (58)
  • 6.0 mm (48)
  • 6.075 mm (1)
  • 6.476 mm (63)
  • 7.0 mm (11)
  • 8.0 mm (25)
  • 8.076 mm (65)
  • 8.201 mm (23)
  • 9.0 mm (37)
  • 9.326 mm (54)
  • 9.675 mm (61)
  • 10.0 mm (28)
  • 10.9 mm (3)
  • 11.0 mm (28)
  • 12.0 mm (32)
  • 12.201 mm (20)
  • 14.0 mm (6)
  • 14.976 mm (16)
  • 16.0 mm (10)
  • 18.0 mm (4)
  • 20.326 mm (4)
  • 22.0 mm (2)
  • 28.0 mm (1)
Back-End Diameter Min do Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.138 in (11)
  • 0.142 in (81)
  • 0.168 in (36)
  • 0.177 in (13)
  • 0.194 in (58)
  • 0.237 in (48)
  • 0.24 in (1)
  • 0.255 in (63)
  • 0.276 in (11)
  • 0.315 in (25)
  • 0.318 in (65)
  • 0.323 in (23)
  • 0.354 in (37)
  • 0.367 in (54)
  • 0.381 in (61)
  • 0.394 in (28)
  • 0.429 in (3)
  • 0.433 in (28)
  • 0.473 in (32)
  • 0.48 in (20)
  • 0.551 in (6)
  • 0.59 in (16)
  • 0.63 in (10)
  • 0.709 in (4)
  • 0.8 in (4)
  • 0.866 in (2)
  • 1.102 in (1)
Back-End Diameter Min do Back-End Diameter Max
No filters matching ""
Zobacz produkty w
Metryczne
Calowe

ORYGINALNY PRODUKT

GT94 • Machine Screw and Fractional • Form E Bottoming Chamfer • Nickel- and Cobalt-Based Alloys GT94 • Machine Screw and Fractional • Form E Bottoming Chamfer • Nickel- and Cobalt-Based Alloys

Victory™ Spiral-Flute HSS-E-PM Taps • Blind Holes
(23 Products)
  • Tapping: Blind HoleTapping: Blind Hole
  • HSS-E-PMHSS-E-PM
  • 3851138511
  • Tapping Helix Angle: 10°Tapping Helix Angle: 10°
  • Flood Coolant: TappingFlood Coolant: Tapping
  • Manufacturer’s Specs: UNFManufacturer’s Specs: UNF
  • Manufacturer’s Specs: UNCManufacturer’s Specs: UNC
  • Manufacturer’s Specs: ANSIManufacturer’s Specs: ANSI
Zobacz produkty
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D1-TDZ] Thread Diameter Size [L] Overall Length [L] Overall Length [L3] Thread Length [L3] Thread Length [L2] Useable Length [L2] Useable Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [Z] Number of Flutes Tap Pitch Diameter Limit
5705934 GT945011 GT945011 WS39MG   10 - 24 61.4000 2.420 12.0000 .4700 23.2000 .9100 4.928 .194 3 H5
    Cena katalogowa:
    $25.40 /każdy
    Twoja cena::
    5705935 GT945012 GT945012 WS39MG   10 - 32 60.2000 2.370 12.0000 .4700 23.2000 .9100 4.928 .194 3 H3
      Cena katalogowa:
      $25.40 /każdy
      Twoja cena::
      5703871 GT945016 GT945016 WS39MG   1/4 - 28 63.4000 2.500 11.1000 .4400 25.5000 1.000 6.477 .255 3 H3
        Cena katalogowa:
        $28.48 /każdy
        Twoja cena::
        5706025 GT945022 GT945022 WS39MG   5/16 - 24 69.0000 2.720 12.4000 .4900 28.8000 1.130 8.077 .318 3 H4
          Cena katalogowa:
          $31.27 /każdy
          Twoja cena::
          5705933 GT945046 GT945046 WU32MG   10 - 24 61.4000 2.420 12.0000 .4700 23.2000 .9100 4.928 .194 3 H3
            Cena katalogowa:
            $39.23 /każdy
            Twoja cena::
            5705936 GT945048 GT945048 WU32MG   10 - 32 60.2000 2.370 12.0000 .4700 23.2000 .9100 4.928 .194 3 H3
              Cena katalogowa:
              $39.23 /każdy
              Twoja cena::
              Cena katalogowa:
              Rabat: %
              Twoja cena::
              Pracownik zastępczy Ten produkt jest niedostępny
              Produkt zastępczy Ten produkt może być dostępny u dystrybutora

              ORYGINALNY PRODUKT

              GT86 • Machine Screw and Fractional • Form C Semi-Bottom Chamfer • DIN Length ANSI Shank • Wrought and Cast Aluminum GT86 • Machine Screw and Fractional • Form C Semi-Bottom Chamfer • DIN Length ANSI Shank • Wrought and Cast Aluminum

              Victory™ Spiral-Flute HSS-E Taps • Blind Holes
              (14 Products)
              • Tapping: Blind HoleTapping: Blind Hole
              • HSS-EHSS-E
              • 3850938509
              • Manufacturer’s Specs: UNFManufacturer’s Specs: UNF
              • Manufacturer’s Specs: UNCManufacturer’s Specs: UNC
              • Flood Coolant: TappingFlood Coolant: Tapping
              • DIN Number ANSIDIN Number ANSI
              • Tapping Helix Angle: 25°Tapping Helix Angle: 25°
              Zobacz produkty
              SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D1-TDZ] Thread Diameter Size [L] Overall Length [L] Overall Length [L3] Thread Length [L3] Thread Length [L2] Useable Length [L2] Useable Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [Z] Number of Flutes Tap Pitch Diameter Limit
              5690840 GT865013 GT865013 WN44EG   6 - 32 56.0000 2.200 9.0000 .3500 20.0000 .7900 3.581 .141 3 H3
                Cena katalogowa:
                $25.46 /każdy
                Twoja cena::
                5690843 GT865016 GT865016 WN44EG   10 - 32 70.0000 2.760 12.0000 .4700 25.0000 .9800 4.928 .194 3 H3
                  Cena katalogowa:
                  $26.08 /każdy
                  Twoja cena::
                  5690844 GT865017 GT865017 WN44EG   1/4 - 20 80.0000 3.150 15.0000 .5900 30.0000 1.180 6.477 .255 3 H3
                    Cena katalogowa:
                    $28.77 /każdy
                    Twoja cena::
                    5690847 GT865020 GT865020 WN44EG   1/4 - 28 80.0000 3.150 15.0000 .5900 30.0000 1.180 6.477 .255 3 H4
                      Cena katalogowa:
                      $28.77 /każdy
                      Twoja cena::
                      5690849 GT865021 GT865021 WN44EG   5/16 - 18 90.0000 3.540 15.0000 .5900 35.0000 1.380 8.077 .318 3 H3
                        Cena katalogowa:
                        $32.02 /każdy
                        Twoja cena::
                        5690853 GT865025 GT865025 WN44EG   3/8 - 16 100.0000 3.940 19.0000 .7500 39.0000 1.540 9.677 .381 3 H3
                          Cena katalogowa:
                          $35.68 /każdy
                          Twoja cena::
                          Cena katalogowa:
                          Rabat: %
                          Twoja cena::
                          Pracownik zastępczy Ten produkt jest niedostępny
                          Produkt zastępczy Ten produkt może być dostępny u dystrybutora

                          ORYGINALNY PRODUKT

                          GT86 • Form C Semi-Bottom Chamfer • Metric • DIN Length ANSI Shank • Wrought and Cast Aluminum GT86 • Form C Semi-Bottom Chamfer • Metric • DIN Length ANSI Shank • Wrought and Cast Aluminum

                          Victory™ Spiral-Flute HSS-E Taps • Blind Holes
                          (8 Products)
                          • HSS-EHSS-E
                          • Tapping: Blind HoleTapping: Blind Hole
                          • 3850938509
                          • Manufacturer’s Specs: MFManufacturer’s Specs: MF
                          • Manufacturer’s Specs: MManufacturer’s Specs: M
                          • DIN Number ANSIDIN Number ANSI
                          • Tapping Helix Angle: 25°Tapping Helix Angle: 25°
                          • Flood Coolant: TappingFlood Coolant: Tapping
                          Zobacz produkty
                          SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D1-TDZ] Thread Diameter Size [L] Overall Length [L] Overall Length [L3] Thread Length [L3] Thread Length [L2] Useable Length [L2] Useable Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [Z] Number of Flutes Tap Pitch Diameter Limit
                          5690865 GT865037 GT865037 WN44EG   M3 X 0,5 56.0000 2.200 8.0000 .3100 18.0000 .7100 3.581 .141 3 D3
                            Cena katalogowa:
                            $42.21 /każdy
                            Twoja cena::
                            5690867 GT865039 GT865039 WN44EG   M4 X 0,7 63.0000 2.480 11.0000 .4300 21.0000 .8300 4.267 .168 3 D4
                              Cena katalogowa:
                              $38.95 /każdy
                              Twoja cena::
                              5690868 GT865040 GT865040 WN44EG   M5 X 0,8 70.0000 2.760 12.0000 .4700 25.0000 .9800 4.928 .194 3 D4
                                Cena katalogowa:
                                $38.95 /każdy
                                Twoja cena::
                                5690869 GT865041 GT865041 WN44EG   M6 X 1 80.0000 3.150 12.0000 .4700 30.0000 1.180 6.477 .255 3 D5
                                  Cena katalogowa:
                                  $38.95 /każdy
                                  Twoja cena::
                                  5690884 GT865046 GT865046 WN44EG   M10 X 1,5 100.0000 3.940 18.0000 .7100 39.0000 1.540 9.677 .381 3 D6