Axial Adjustment - End
Balanced-by-Design 
Drilling - Through Coolant
Shank - Cylindrical Plain ≤h6
Shank - Cylindrical Weldon® ≤h6
Shank - Cylindrical Whistle Notch ≤h6
Balance - G 6.3@15,000 min -1
Accuracy - 6μm or Less
Speed - 20,000 min-1 Maximum
Shank - SK CAT(CV) ANSI B5.50 1"–8 unc Drawbar
Shank - SK CAT(CV) ANSI B5.50
Coolant - Through Coolant 100 bar (1500 psi) Maximum
Coolant - Through Coolant 100 bar (1500 psi) Maximum
Balance - G 2.5@25,000 min-1Downloaded file will be available after import in the {{cadTool}} tool library.
| Nr materiału | 3019261 |
| Nr katalogowy ISO | CV50HCSLT038787 |
| Nr katalogowy ANSI | CV50HCSLT038787 |
| [D1] Adapter / Shank / Bore Diameter | 9.525 mm |
| [D1] Adapter / Shank / Bore Diameter | 0.375 in |
| [D2] Body Diameter 1 Workpiece Side | 17.5 mm |
| [D2] Body Diameter 1 Workpiece Side | 0.689 in |
| [D21] Body Diameter 2 Workpiece Side | 44.45 mm |
| [D21] Body Diameter 2 Workpiece Side | 1.75 in |
| Max Diameter Taper Angle [D22] | 69.85 mm |
| Max Diameter Taper Angle [D22] | 2.75 in |
| [L1] Gage Length | 200 mm |
| [L1] Gage Length | 7.87 in |
| [L2] Usable Length | 85 mm |
| [L2] Usable Length | 3.346 in |
| [L9] Clamping Length | 31 mm |
| [L9] Clamping Hole Length | 1.22 in |
| [V] Adjustment Range | 10 mm |
| [V] Adjustment Range | 0.394 in |
| Actuation Screw ID Drive Size | 5 mm |
| Stop Screw ID Drive Size | 3 mm |
| Weight Kilograms | 3.99 |
Axial Adjustment - EndBalanced-by-Design Drilling - Through CoolantShank - Cylindrical Plain ≤h6Shank - Cylindrical Weldon® ≤h6Shank - Cylindrical Whistle Notch ≤h6Balance - G 6.3@15,000 min -1Accuracy - 6μm or LessSpeed - 20,000 min-1 MaximumShank - SK CAT(CV) ANSI B5.50 1"–8 unc DrawbarShank - SK CAT(CV) ANSI B5.50Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) MaximumBalance - G 2.5@25,000 min-1Złóż nowe rozwiązanie aby obliczyc parametry posuwu i prędkości
Po złóżeniu rozwiązania wybierz ikonę "Posuwy i prędkości" a system pokaże rekomendowane wartości. Możesz doprecyzować wyniki dodając maszynę i jej specyfikacje lub zmień wartości początkowe Używając suwaki.
I have read and accepted the Terms & Conditions of use
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
Oznaczenie katalogowe ISO
Oznaczenie katalogowe ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | Oznaczenie katalogowe ISO | Gatunek |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?