Drilling
Drilling: Stacked Plates
Drilling - Through Coolant
Tool Dimensions: 2flute/4margin/coolantDownloaded file will be available after import in the {{cadTool}} tool library.
| Nr materiału | 3899696 |
| Nr katalogowy ISO | TDD105Z06350 |
| Nr katalogowy ASI | TDD105Z06350 |
| Grade | WU20PD |
| [D1] Drill Diameter M | 6.35 mm |
| [D1] Drill Diameter M | 0.25 in |
| [D1] Wire Size | E |
| [D] Adapter / Shank / Bore Diameter | 7 mm |
| [D] Adapter / Shank / Bore Diameter | 0.2756 in |
| [L3] Flute Length | 119 mm |
| [L3] Flute Length | 4.69 in |
| [L4] Maximum Drilling Depth | 104 mm |
| [L4] Maximum Drilling Depth | 4.09 in |
| [L5] Drill Point Length | 1.32 mm |
| [L5] Drill Point Length | 0.052 in |
| [LS] Shank Length | 38 mm |
| [LS] Shank Length | 1.5 in |
| [L] Overall Length | 162 mm |
| [L] Overall Length | 6.38 in |
DrillingDrilling: Stacked PlatesDrilling - Through CoolantTool Dimensions: 2flute/4margin/coolantGatunki
WU20PD
Composition: With a multilayered PVD TiN-TiAlN coating, a high-quality, sub-micron, carbide substrate and a state-of-the-art surface condition, this grade gives the highest level of wear resistance at high cutting speeds.
Application: First choice for alloyed and high-alloyed steels and cast irons. A state-of-the-art surface condition enables superior chip evacuation even when MQL is applied.
Złóż nowe rozwiązanie aby obliczyc parametry posuwu i prędkości
Po złóżeniu rozwiązania wybierz ikonę "Posuwy i prędkości" a system pokaże rekomendowane wartości. Możesz doprecyzować wyniki dodając maszynę i jej specyfikacje lub zmień wartości początkowe Używając suwaki.
| Metryczne | |||
| tolerancja | |||
| zakres rozmiarów nominalnych | D1 tolerancja | D1 tolerancja | D tolerancja h6 |
| 0,000/–0,012 | 0,000/–0,008 | ||
| 0,000/–0,015 | 0,000/–0,009 | ||
| 0,000/–0,018 | 0,000/–0,011 | ||
| Grupa materiałowa |  |  | |||||||||||
| Prędkość skrawania | Zalecana wartość posuwu w zależności od średnicy (fz) | ||||||||||||
| Zakres prędkości skrawania | |||||||||||||
| Min. | Maks. | Średnica narzędzia | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | |||
| P | 1 | 90 | – | 130 | mm/obr. | 0,08–0,12 | 0,12–0,18 | 0,18–0,20 | 0,20–0,22 | 0,22–0,25 | 0,25–0,28 | 0,28–0,30 | 0,30–0,34 |
| 2 | 80 | – | 115 | mm/obr. | 0,08–0,12 | 0,12–0,18 | 0,18–0,20 | 0,20–0,22 | 0,22–0,25 | 0,25–0,28 | 0,28–0,30 | 0,30–0,34 | |
| 3 | 70 | – | 110 | mm/obr. | 0,05–0,10 | 0,10–0,16 | 0,16–0,18 | 0,18–0,20 | 0,20–0,22 | 0,22–0,24 | 0,24–0,26 | 0,26–0,28 | |
| 4 | 65 | – | 95 | mm/obr. | 0,05–0,10 | 0,10–0,16 | 0,16–0,18 | 0,18–0,20 | 0,20–0,22 | 0,22–0,24 | 0,24–0,26 | 0,26–0,28 | |
| K | 1 | 105 | – | 145 | mm/obr. | 0,10–0,15 | 0,15–0,20 | 0,20–0,25 | 0,25–0,28 | 0,28–0,30 | 0,30–0,33 | 0,33–0,36 | 0,36–0,38 |
| 2 | 85 | – | 120 | mm/obr. | 0,10–0,15 | 0,15–0,20 | 0,20–0,25 | 0,25–0,28 | 0,28–0,30 | 0,30–0,33 | 0,33–0,36 | 0,36–0,38 | |
| 3 | 100 | – | 140 | mm/obr. | 0,10–0,15 | 0,15–0,20 | 0,20–0,25 | 0,25–0,28 | 0,28–0,30 | 0,30–0,33 | 0,33–0,36 | 0,36–0,38 | |
| | ||||||||||||
| Prędkość skrawania | |||||||||||||
| Zakres prędkości skrawania | Zalecana wartość posuwu w zależności od średnicy (fz) | ||||||||||||
| Grupa materiałowa | Min. | Maks. | Średnica narzędzia | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | ||
| P | 1 | 90 | – | 130 | mm/dev. | 0,08–0,12 | 0,12–0,18 | 0,18–0,20 | 0,20–0,22 | 0,22–0,25 | 0,25–0,28 | 0,28–0,30 | 0,30–0,34 |
| 2 | 80 | – | 115 | mm/dev. | 0,08–0,12 | 0,12–0,18 | 0,18–0,20 | 0,20–0,22 | 0,22–0,25 | 0,25–0,28 | 0,28–0,30 | 0,30–0,34 | |
| 3 | 70 | – | 110 | mm/dev. | 0,05–0,10 | 0,10–0,16 | 0,16–0,18 | 0,18–0,20 | 0,20–0,22 | 0,22–0,24 | 0,24–0,26 | 0,26–0,28 | |
| 4 | 65 | – | 95 | mm/dev. | 0,05–0,10 | 0,10–0,16 | 0,16–0,18 | 0,18–0,20 | 0,20–0,22 | 0,22–0,24 | 0,24–0,26 | 0,26–0,28 | |
| K | 1 | 105 | – | 145 | mm/dev. | 0,10–0,15 | 0,15–0,20 | 0,20–0,25 | 0,25–0,28 | 0,28–0,30 | 0,30–0,33 | 0,33–0,36 | 0,36–0,38 |
| 2 | 85 | – | 120 | mm/dev. | 0,10–0,15 | 0,15–0,20 | 0,20–0,25 | 0,25–0,28 | 0,28–0,30 | 0,30–0,33 | 0,33–0,36 | 0,36–0,38 | |
| 3 | 100 | – | 140 | mm/dev. | 0,10–0,15 | 0,15–0,20 | 0,20–0,25 | 0,25–0,28 | 0,28–0,30 | 0,30–0,33 | 0,33–0,36 | 0,36–0,38 | |
| Calowe | |||
| tolerancja | |||
| D1 | D1 tolerancja m7 | D | D tolerancja h6 |
| .0000/-.0005 | .0000/-.0003 | ||
| .0000/-.0006 | .0000/-.0004 | ||
| .0000/-.0007 | .0000/-.0004 | ||
|  |  | |||||||||||
| Prędkość skrawania | |||||||||||||
| Zakres prędkości skrawania | Zalecana wartość prędkości posuwu w zależności od średnicy (f) | ||||||||||||
| Grupa materiałowa | Min. | – | Maks. | Średnica narzędzia | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | |
| P | 1 | 90 | – | 130 | mm/r | 0,08–0,12 | 0,12–0,18 | 0,18–0,20 | 0,20–0,22 | 0,22–0,25 | 0,25–0,28 | 0,28–0,30 | 0,30–0,34 |
| 2 | 80 | – | 115 | mm/r | 0,08–0,12 | 0,12–0,18 | 0,18–0,20 | 0,20–0,22 | 0,22–0,25 | 0,25–0,28 | 0,28–0,30 | 0,30–0,34 | |
| 3 | 70 | – | 110 | mm/r | 0,05–0,10 | 0,10–0,16 | 0,16–0,18 | 0,18–0,20 | 0,20–0,22 | 0,22–0,24 | 0,24–0,26 | 0,26–0,28 | |
| 4 | 65 | – | 95 | mm/r | 0,05–0,10 | 0,10–0,16 | 0,16–0,18 | 0,18–0,20 | 0,20–0,22 | 0,22–0,24 | 0,24–0,26 | 0,26–0,28 | |
| K | 1 | 105 | – | 145 | mm/r | 0,10–0,15 | 0,15–0,20 | 0,20–0,25 | 0,25–0,28 | 0,28–0,30 | 0,30–0,33 | 0,33–0,36 | 0,36–0,38 |
| 2 | 85 | – | 120 | mm/r | 0,10–0,15 | 0,15–0,20 | 0,20–0,25 | 0,25–0,28 | 0,28–0,30 | 0,30–0,33 | 0,33–0,36 | 0,36–0,38 | |
| – | 3 | 100 | – | 140 | mm/r | 0,10–0,15 | 0,15–0,20 | 0,20–0,25 | 0,25–0,28 | 0,28–0,30 | 0,30–0,33 | 0,33–0,36 | 0,36–0,38 |
| Grupa materiałowa | | | | ||||||||||
| Prędkość skrawania | Zalecana wartość prędkości posuwu w zależności od średnicy (f) | ||||||||||||
| Zakres prędkości skrawania | |||||||||||||
| Min. | – | Maks. | Średnica narzędzia | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | ||
| P | 1 | 90 | – | 130 | mm/obr. | 0,08–0,12 | 0,12–0,18 | 0,18–0,20 | 0,20–0,22 | 0,22–0,25 | 0,25–0,28 | 0,28–0,30 | 0,30–0,34 |
| 2 | 80 | – | 115 | mm/obr. | 0,08–0,12 | 0,12–0,18 | 0,18–0,20 | 0,20–0,22 | 0,22–0,25 | 0,25–0,28 | 0,28–0,30 | 0,30–0,34 | |
| 3 | 70 | – | 110 | mm/obr. | 0,05–0,10 | 0,10–0,16 | 0,16–0,18 | 0,18–0,20 | 0,20–0,22 | 0,22–0,24 | 0,24–0,26 | 0,26–0,28 | |
| 4 | 65 | – | 95 | mm/obr. | 0,05–0,10 | 0,10–0,16 | 0,16–0,18 | 0,18–0,20 | 0,20–0,22 | 0,22–0,24 | 0,24–0,26 | 0,26–0,28 | |
| K | 1 | 105 | – | 145 | mm/obr. | 0,10–0,15 | 0,15–0,20 | 0,20–0,25 | 0,25–0,28 | 0,28–0,30 | 0,30–0,33 | 0,33–0,36 | 0,36–0,38 |
| 2 | 85 | – | 120 | mm/obr. | 0,10–0,15 | 0,15–0,20 | 0,20–0,25 | 0,25–0,28 | 0,28–0,30 | 0,30–0,33 | 0,33–0,36 | 0,36–0,38 | |
| 3 | 100 | – | 140 | mm/obr. | 0,10–0,15 | 0,15–0,20 | 0,20–0,25 | 0,25–0,28 | 0,28–0,30 | 0,30–0,33 | 0,33–0,36 | 0,36–0,38 | |
| Metryczne | |||
| tolerancja | |||
| nominalne zakres rozmiarów | D1 tolerancja | D1 tolerancja | D tolerancja h6 |
| 0,000/–0,012 | 0,000/–0,008 | ||
| 0,000/–0,015 | 0,000/–0,009 | ||
| 0,000/–0,018 | 0,000/–0,011 | ||
| Grupa materiałowa | | | | ||||||||||
| Prędkość skrawania | Zalecana wartość prędkości posuwu w zależności od średnicy (f) | ||||||||||||
| Zakres prędkości skrawania [SFM] | |||||||||||||
| Min. | – | Maks. | Średnica narzędzia | 0.125 | 0.188 | 0.250 | 0.313 | 0.375 | 0.500 | 0.625 | 0.750 | ||
| P | 1 | 295 | – | 425 | Cale/obrót | 0.003–0.005 | 0.005–0.007 | 0.007–0.008 | 0.008–0.009 | 0.009–0.010 | 0.010–0.011 | 0.011–0.012 | 0.012–0.013 |
| 2 | 260 | – | 375 | Cale/obrót | 0.003–0.005 | 0.005–0.007 | 0.007–0.008 | 0.008–0.009 | 0.009–0.010 | 0.010–0.011 | 0.011–0.012 | 0.012–0.013 | |
| 3 | 230 | – | 360 | Cale/obrót | 0.002–0.004 | 0.004–0.006 | 0.006–0.007 | 0.007–0.008 | 0.008–0.009 | 0.009 | 0.009–0.010 | 0.010–0.011 | |
| 4 | 215 | – | 310 | Cale/obrót | 0.002–0.004 | 0.004–0.006 | 0.006–0.007 | 0.007–0.008 | 0.008–0.009 | 0.009 | 0.009–0.010 | 0.010–0.011 | |
| K | 1 | 345 | – | 475 | Cale/obrót | 0.004–0.006 | 0.006–0.008 | 0.008–0.010 | 0.010–0.011 | 0.011–0.012 | 0.012–0.013 | 0.013–0.014 | 0.014–0.015 |
| 2 | 280 | – | 390 | Cale/obrót | 0.004–0.006 | 0.006–0.008 | 0.008–0.010 | 0.010–0.011 | 0.011–0.012 | 0.012–0.013 | 0.013–0.014 | 0.014–0.015 | |
| 3 | 325 | – | 460 | Cale/obrót | 0.004–0.006 | 0.006–0.008 | 0.008–0.010 | 0.010–0.011 | 0.011–0.012 | 0.012–0.013 | 0.013–0.014 | 0.014–0.015 | |
| | | |||||||||||
| Prędkość skrawania | |||||||||||||
| Zakres prędkości skrawania [SFM] | Zalecana wartość prędkości posuwu w zależności od średnicy (f) | ||||||||||||
| Grupa materiałowa | Min. | – | Maks. | Średnica narzędzia | 0.125 | 0.188 | 0.250 | 0.313 | 0.375 | 0.500 | 0.625 | 0.750 | |
| P | 1 | 295 | – | 425 | IPR | 0.003–0.005 | 0.005–0.007 | 0.007–0.008 | 0.008–0.009 | 0.009–0.010 | 0.010–0.011 | 0.011–0.012 | 0.012–0.013 |
| 2 | 260 | – | 375 | IPR | 0.003–0.005 | 0.005–0.007 | 0.007–0.008 | 0.008–0.009 | 0.009–0.010 | 0.010–0.011 | 0.011–0.012 | 0.012–0.013 | |
| 3 | 230 | – | 360 | IPR | 0.002–0.004 | 0.004–0.006 | 0.006–0.007 | 0.007–0.008 | 0.008–0.009 | 0.009 | 0.009–0.010 | 0.010–0.011 | |
| 4 | 215 | – | 310 | IPR | 0.002–0.004 | 0.004–0.006 | 0.006–0.007 | 0.007–0.008 | 0.008–0.009 | 0.009 | 0.009–0.010 | 0.010–0.011 | |
| K | 1 | 345 | – | 475 | IPR | 0.004–0.006 | 0.006–0.008 | 0.008–0.010 | 0.010–0.011 | 0.011–0.012 | 0.012–0.013 | 0.013–0.014 | 0.014–0.015 |
| 2 | 280 | – | 390 | IPR | 0.004–0.006 | 0.006–0.008 | 0.008–0.010 | 0.010–0.011 | 0.011–0.012 | 0.012–0.013 | 0.013–0.014 | 0.014–0.015 | |
| – | 3 | 325 | – | 460 | IPR | 0.004–0.006 | 0.006–0.008 | 0.008–0.010 | 0.010–0.011 | 0.011–0.012 | 0.012–0.013 | 0.013–0.014 | 0.014–0.015 |
I have read and accepted the Terms & Conditions of use
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
Oznaczenie katalogowe ISO
Oznaczenie katalogowe ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | Oznaczenie katalogowe ISO | Gatunek |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?