Drilling
Drilling: Inclined Exit
Drilling: Stacked Plates
Drilling - Through Coolant
Shank - Cylindrical Plain ≤h6
Helix Angle: 30°
Tool Dimensions: 2flute/4margin/coolant
38550
Drilling Depth: 12xDownloaded file will be available after import in the {{cadTool}} tool library.
| Nr materiału | 4173545 |
| Nr katalogowy ISO | TDS504A03455 |
| Nr katalogowy ANSI | TDS504A03455 |
| Grade | WU20PD |
| [D1] Drill Diameter M | 3.455 mm |
| [D1] Drill Diameter M | 0.136 in |
| [D1] Wire Size | 29 |
| [L] Overall Length | 93 mm |
| [L] Overall Length | 3.6614 in |
| [L4] Maximum Drilling Depth | 44 mm |
| [L4] Maximum Drilling Depth | 1.7323 in |
| [L3] Flute Length | 53 mm |
| [L3] Flute Length | 2.0866 in |
| [L5] Drill Point Length | 0.718 mm |
| [L5] Drill Point Length | 0.0283 in |
| [LS] Shank Length | 36 mm |
| [LS] Shank Length | 1.4173 in |
| [D] Adapter / Shank / Bore Diameter | 6 mm |
| [D] Adapter / Shank / Bore Diameter | 0.2362 in |
DrillingDrilling: Inclined ExitDrilling: Stacked PlatesDrilling - Through CoolantShank - Cylindrical Plain ≤h6Helix Angle: 30°Tool Dimensions: 2flute/4margin/coolant38550Drilling Depth: 12xGatunki
WU20PD
Composition: With a multilayered PVD TiN-TiAlN coating, a high-quality, sub-micron, carbide substrate and a state-of-the-art surface condition, this grade gives the highest level of wear resistance at high cutting speeds.
Application: First choice for alloyed and high-alloyed steels and cast irons. A state-of-the-art surface condition enables superior chip evacuation even when MQL is applied.
Złóż nowe rozwiązanie aby obliczyc parametry posuwu i prędkości
Po złóżeniu rozwiązania wybierz ikonę "Posuwy i prędkości" a system pokaże rekomendowane wartości. Możesz doprecyzować wyniki dodając maszynę i jej specyfikacje lub zmień wartości początkowe Używając suwaki.
| Metryczne | ||
| tolerancja | ||
| nominalne zakres rozmiarów | D1 tolerancja m7 | D tolerancja h6 |
| 0,004/0,016 | 0,000/–0,008 | |
| 0,006/0,021 | 0,000/–0,009 | |
| 0,007/0,025 | 0,000/–0,011 | |
| 0,008/0,029 | 0,000/–0,013 | |
| Calowe | ||
| tolerancja | ||
| nominalne zakres rozmiarów | D1 tolerancja m7 | D tolerancja h6 |
| .0000/.0005 | .0000/-.0003 | |
| .0000/.0006 | .0000/-.0004 | |
| .0000/.0007 | .0000/-.0004 | |
| .0000/.0009 | .0000/-.0005 | |
I have read and accepted the Terms & Conditions of use
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
Oznaczenie katalogowe ISO
Oznaczenie katalogowe ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | Oznaczenie katalogowe ISO | Gatunek |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?