Mocowanie M
Filtry
Filtry
Wyświetl filtry w
MetryczneCalowe
Workpiece Material
Workpiece Material
- P Steel (27)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(27)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(27)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(27)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(27)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(27)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(27)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(27)
- M Stainless Steel (27)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(27)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(27)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(27)
- K Cast Iron (25)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(25)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(25)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(25)
- N Non-Ferrous Materials (18)
- N7MMC's (16)
- N1Wrought Aluminum (16)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (16)
- N3High-Silicon Aluminum Alloys Si >12.2%(2)
- N6Carbon, Graphite Composites, CFRP (12)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(16)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (18)
- S High-Temp Alloys (21)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(21)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(21)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(21)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(21)
- H Hardened Materials (10)
- H3Hardened Materials 56-60 HRC(10)
- H1Hardened Materials 44-48 HRC(10)
- H4Hardened Materials >60 HRC(2)
- H2Hardened Materials 48-55 HRC(10)
Applications
Applications
Chamfer Turning (13)
Facing (29)
ID Facing (15)
Multiple Direction Cutting (29)
Profiling (19)
TRN Boring (15)
Turning (29)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (2)
- 75.0 (11)
- 90.0 (6)
- 93.0 (6)
- 95.0 (4)
do
Connection Style
Connection Style
- KM (14)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 0.0 (14)
- 1.0 (2)
- 2.0 (18)
- 3.0 (2)
- 4.0 (15)
- 6.0 (2)
- 8.0 (17)
do
Internal Coolant Capability
Internal Coolant Capability
Corner Radius
Corner Radius
- 0.004 in(2)
- 0.008 in(2)
- 0.016 in(2)
- 0.031 in(14)
- 0.047 in(14)
- 0.063 in(12)
- 0.094 in(19)
- 0.126 in(2)
- 0.157 in(4)
- 0.25 in(2)
- 0.375 in(2)
- 0.5 in(2)
do
Corner Radius
Corner Radius
- 0.1 mm(2)
- 0.2 mm(2)
- 0.4 mm(2)
- 0.8 mm(14)
- 1.2 mm(14)
- 1.6 mm(12)
- 2.375 mm(3)
- 2.4 mm(19)
- 3.2 mm(2)
- 4.0 mm(4)
- 6.35 mm(2)
- 9.525 mm(2)
- 12.7 mm(2)
do
application
Grade Of Cutting Tool
Grade Of Cutting Tool
- CW2015 (2)
- K090 (6)
- K1 (4)
- K313 (16)
- K68 (20)
- KB1610 (2)
- KB1630 (2)
- KB5610 (2)
- KB5630 (2)
- KBH10 (2)
- KBH10B (2)
- KBH20 (2)
- KBH20B (2)
- KC5010 (19)
- KC5025 (12)
- KC5410 (12)
- KC730 (8)
- KC850 (23)
- KC9125 (2)
- KCK05 (2)
- KCK15 (10)
- KCK15B (10)
- KCK20 (14)
- KCK20B (8)
- KCM15 (6)
- KCM15B (8)
- KCM25 (14)
- KCM25B (17)
- KCM35 (14)
- KCP05 (2)
- KCP05B (2)
- KCP10 (23)
- KCP10B (17)
- KCP25 (25)
- KCP25B (25)
- KCP25C (25)
- KCP30 (23)
- KCP30B (16)
- KCP40 (21)
- KCP40B (19)
- KCPK05 (12)
- KCS10B (14)
- KCU10 (21)
- KCU10B (18)
- KCU25 (14)
- KCU25B (14)
- KD1400 (2)
- KD1405 (2)
- KD1425 (2)
- KT315 (2)
- KTP10 (2)
- KTP25S (2)
- KY3500 (12)
- KY4300 (6)
- KY4400 (8)
- KYHK15B (10)
- KYK25 (6)
- THM (10)
- TN10P (10)
- TN10U (2)
- TN15U (2)
- TN2000 (10)
- TN20K (10)
- TN20P (10)
- TN30M (6)
- TN30P (12)
- TN4000 (10)
- TTR-X (4)
- TTS (10)
- WBH10P (2)
- WBH20P (2)
- WBH30P (2)
- WDN25U (2)
- WK05CT (14)
- WK20CT (18)
- WM15CT (12)
- WM25CT (17)
- WM35CT (14)
- WP15CT (23)
- WP25CT (25)
- WP35CT (25)
- WS10PT (12)
- WS25PT (14)
- WU10HT (10)
- WU10PT (2)
- WU25PT (2)
Hand Of Tool
Hand Of Tool
- L (6)
- N (2)
- R (6)
Wiper Insert
Wiper Insert
- N (27)
- Y (4)
F Dimension
F Dimension
- 0.0 mm(2)
- 58.0 mm(8)
- 63.0 mm(4)
do
F Dimension
F Dimension
- 0.0 in(2)
- 2.283 in(8)
- 2.48 in(4)
do
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 120.0 mm(15)
do
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 4.724 in(15)
do
Cutting Direction
Cutting Direction
- S (14)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (12)
- NEGATIVE-ZERO (2)
Maximum Bore Depth
Maximum Bore Depth
- 3.937 in(15)
do
Maximum Bore Depth
Maximum Bore Depth
- 100.0 mm(15)
do
frontEnd
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (10)
- R-ROUND (6)
- S-SQUARE 90 (7)
- T-TRIANGLE 60 (4)
- V-DIAMOND/RHOMBIC 35 (2)
insertGeometry
Cutting Tool Material
Cutting Tool Material
- B H (2)
- B L (2)
- C A (8)
- C N (12)
- D P (2)
- H T (2)
- H W (27)
backEnd
Connection Type
Connection Type
- TAPER SHANK (14)
System Size
System Size
- KM4X100 (14)
No filters matching ""
