successfully added to cart
View Cart

Notifications

Mark all as read
A-DWLN 95°
A-DWLN 95°
A-DWLN 95°
A-DWLN 95°

A-DWLN 95°

A-DWLN 95°

Uses and application

  • I.D. Chamfering & ProfilingI.D. Chamfering & Profiling
  • 5236852368

Workpiece Materials

P Steel
M Stainless Steel
K Cast Iron
N Non-Ferrous
S High-Temp Alloys
H Hardened Materials
Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (7)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (7)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (7)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (7)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (7)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (7)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (7)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (7)
  • M Stainless Steel (7)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (7)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (7)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (7)
  • K Cast Iron (7)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (7)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (7)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (7)
  • N Non-Ferrous Materials (7)
    • N1
      Wrought Aluminum
      (7)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (7)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (6)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (7)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (6)
    • N6
      Carbon, Graphite Composites, CFRP
      (6)
    • N7
      MMC's
      (6)
  • S High-Temp Alloys (7)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (7)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (7)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (7)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (7)
  • H Hardened Materials (6)
    • H1
      Hardened Materials 44-48 HRC
      (6)
    • H2
      Hardened Materials 48-55 HRC
      (6)
    • H3
      Hardened Materials 56-60 HRC
      (6)
    • H4
      Hardened Materials >60 HRC
      (6)
Select All Star
  • DE (5)
Applications
Applications
  • Multiple Direction Cutting Multiple Direction Cutting (7)
  • Profiling Profiling (7)
  • TRN Boring TRN Boring (7)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (7)
  • Lightly Interrupted Cut (7)
  • Smooth Cut (7)
  • Varying Depth of Cut (7)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (6)
  • 3.0 (6)
  • 6.0 (7)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Corner configuration
Corner Radius
Corner Radius
  • 0.4 mm (7)
  • 0.6 mm (6)
  • 0.794 mm (6)
  • 0.8 mm (7)
  • 1.191 mm (6)
  • 1.2 mm (7)
  • 1.6 mm (6)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.0156 in (7)
  • 0.0312 in (6)
  • 0.0313 in (7)
  • 0.0469 in (7)
  • 0.0625 in (6)
Corner Radius Min to Corner Radius Max
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • CW5025 (6)
  • HK1500 (7)
  • TN10P (7)
  • TN10U (6)
  • TN15M (7)
  • TN15U (6)
  • TN2000 (7)
  • TN20K (7)
  • TN20P (7)
  • TN30M (7)
  • TN30P (6)
  • TN4000 (7)
  • TN5015 (6)
  • TN5020 (6)
  • TN5105 (6)
  • TN5120 (6)
  • TN6025 (6)
  • TN7005 (6)
  • TN7010 (6)
  • TN7015 (6)
  • TN7025 (6)
  • TN7035 (6)
  • TN7105 (7)
  • TN7110 (6)
  • TN7115 (6)
  • TN7125 (6)
  • TN7135 (6)
  • TN8025 (7)
  • WBH10C (6)
  • WBH10U (6)
  • WBH20P (6)
  • WDN25U (6)
  • WK05CT (7)
  • WK15CT (7)
  • WK20CT (7)
  • WM15CT (7)
  • WM25CT (7)
  • WM35CT (7)
  • WP05CT (6)
  • WP15CT (7)
  • WP25CT (7)
  • WP35CT (7)
  • WS10PT (7)
  • WS25PT (7)
  • WU10HT (7)
  • WU10PT (7)
  • WU25PT (7)
Hand Of Tool
Hand Of Tool
  • L (4)
  • R (3)
Wiper Insert
Wiper Insert
  • N (7)
  • Y (7)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 1.26 in (3)
  • 1.575 in (2)
  • 1.969 in (2)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 32.0 mm (3)
  • 40.0 mm (2)
  • 50.0 mm (2)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Maximum Bore Depth
Maximum Bore Depth
  • 100.0 mm (3)
  • 128.0 mm (2)
  • 160.0 mm (2)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 3.936 in (3)
  • 5.04 in (2)
  • 6.3 in (2)
Maximum Bore Depth Min to Maximum Bore Depth Max
Insert Geometry
Cutting Tool Material
Cutting Tool Material
  • B H (6)
  • B L (6)
  • C N (7)
  • D P (6)
  • H W (7)
Back-End
Back-End Diameter
Back-End Diameter
  • 0.984 in (3)
  • 1.26 in (2)
  • 1.575 in (2)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 25.0 mm (3)
  • 32.0 mm (2)
  • 40.0 mm (2)
Back-End Diameter Min to Back-End Diameter Max
other
Cutting Condition Material
Cutting Condition Material
  • H-All (6)
  • K-All (7)
  • M-All (7)
  • N-All (6)
  • P-All (7)
  • S-All (7)
Over All Length [L]
Over All Length [L]
  • 200.0 mm (3)
  • 250.0 mm (2)
  • 300.0 mm (2)
Over All Length [L] Min to Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 7.874 in (3)
  • 9.843 in (2)
  • 11.811 in (2)
Over All Length [L] Min to Over All Length [L] Max
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying 1- 7 of 7 results
Select Columns
Select Filters
Metric
Inch
Show
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [CS] Coolant Supply Size Gage Insert Shim Screw ID Drive Size Clamp Screw ID Drive Size
5696268 A25RDWLNL06KC04 A25RDWLNL06KC04   WG 25.0 .984 32.0000 1.260 17.0000 .6690 200.0000 7.874 1/4-18 NPT WN..060408   15 IP
    List price:
    $238.16 /each.
    Your price::
    Qty
    5696280 A25RDWLNL08KC04 A25RDWLNL08KC04   WG 25.0 .984 32.0000 1.260 17.0000 .6690 200.0000 7.874 1/4-18 NPT WN..080408   15 IP
      List price:
      $238.16 /each.
      Your price::
      Qty
      5696282 A32SDWLNL08KC04 A32SDWLNL08KC04   WG 32.0 1.26 40.0000 1.575 22.0000 .8660 250.0000 9.843 1/4-18 NPT WN..080408 15 IP 15 IP
        List price:
        $262.69 /each.
        Your price::
        Qty
        5696281 A32SDWLNR08KC04 A32SDWLNR08KC04   WG 32.0 1.26 40.0000 1.575 22.0000 .8660 250.0000 9.843 1/4-18 NPT WN..080408 15 IP 15 IP
          List price:
          $262.69 /each.
          Your price::
          Qty
          5696269 A25RDWLNR08KC04 A25RDWLNR08KC04   WG 25.0 .984 32.0000 1.260 17.0000 .6690 200.0000 7.874 1/4-18 NPT WN..080408   15 IP
            List price:
            $238.16 /each.
            Your price::
            Qty
            5696284 A40TDWLNL08KC04 A40TDWLNL08KC04   WG 40.0 1.575 50.0000 1.969 27.0000 1.063 300.0000 11.811 1/4-18 NPT WN..080408 15 IP 15 IP
              List price:
              $299.63 /each.
              Your price::
              Qty
              5696283 A40TDWLNR08KC04 A40TDWLNR08KC04   WG 40.0 1.575 50.0000 1.969 27.0000 1.063 300.0000 11.811 1/4-18 NPT WN..080408 15 IP 15 IP
                List price:
                $299.63 /each.
                Your price::
                Qty
                List price:
                Discount: %
                Your price::
                Replacement This item is not available
                Replacement Product This item may be available through a distributor
                Qty

                Sold in pkg. of

                Grades

                • WG
                  P Steel
                  M Stainless Steel
                  K Cast Iron
                  N Non-Ferrous
                  S High-Temp Alloys
                  H Hardened Materials
                product-image
                Please adjust the following properties from

                ISO Catalog Number

                ANSI Catalog Number

                to find similar products.
                You are about to create a duplicate . Do you want to proceed?
                You are about to delete Do you want to proceed?
                What would you like to rename your to?
                Please enter a valid name
                Please enter a name for the duplicate
                Please enter a valid name
                You are about to add to your My Solutions page. Do you want to proceed?
                Please enter a valid name
                Send a copy of

                Please enter a valid Email
                Please enter a valid name

                We have found the following CAD Drawings

                Select the files you are looking for and download them all at once

                You should be logged to see your dashboard information
                The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                item(s) successfully added to the cart
                View Cart