GP

Select Filters
Filters
    View filters in
    Metric
    Inch
    Key Filters
    Workpiece Material
    Workpiece Material
    • P Steel (1338)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1338)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1338)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(1338)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(1180)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(1180)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(447)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(447)
    • M Stainless Steel (1180)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(1180)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(1180)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(447)
    • K Cast Iron (1180)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(1180)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(1180)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(452)
    • N Non-Ferrous Materials (775)
      • N1
        Wrought Aluminum (663)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(663)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(441)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (505)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (711)
      • N6
        Carbon, Graphite Composites, CFRP (441)
      • N7
        MMC's (440)
    • S High-Temp Alloys (447)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(447)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(447)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(447)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(447)
    • H Hardened Materials (447)
      • H1
        Hardened Materials 44-48 HRC(447)
      • H2
        Hardened Materials 48-55 HRC(444)
      • H3
        Hardened Materials 56-60 HRC(437)
      • H4
        Hardened Materials >60 HRC(437)
    Select All Star
    • CN (228)
    • DE (311)
    • GB (142)
    • IN (148)
    • SG (206)
    • US (332)
    Applications
    Applications
    • Face MillingFace Milling (1165)
    • PocketPocket (1468)
    • Pocket HelicalPocket Helical (1468)
    • Pocket MillingPocket Milling (1467)
    • Pocket Plunge MillingPocket Plunge Milling (263)
    • Profile MillingProfile Milling (270)
    • RampingRamping (1511)
    • Shoulder Ball NoseShoulder Ball Nose (270)
    • Shoulder MillingShoulder Milling (1468)
    • Shoulder RoughingShoulder Roughing (951)
    • Shoulder Square EndShoulder Square End (1240)
    • Slot Ball NoseSlot Ball Nose (270)
    • Slot MillingSlot Milling (885)
    • Slot Square EndSlot Square End (663)
    Cutting Diameter
    Cutting Diameter
    • 0.016 in(2)
    • 0.031 in(8)
    • 0.039 in(7)
    • 0.047 in(2)
    • 0.06 in(7)
    • 0.063 in(17)
    • 0.072 in(1)
    • 0.078 in(7)
    • 0.079 in(26)
    • 0.094 in(20)
    • 0.098 in(16)
    • 0.109 in(5)
    • 0.119 in(53)
    • 0.125 in(38)
    • 0.138 in(13)
    • 0.142 in(3)
    • 0.156 in(10)
    • 0.157 in(71)
    • 0.173 in(2)
    • 0.177 in(19)
    • 0.187 in(4)
    • 0.188 in(33)
    • 0.197 in(67)
    • 0.203 in(2)
    • 0.217 in(14)
    • 0.219 in(8)
    • 0.234 in(2)
    • 0.237 in(88)
    • 0.25 in(45)
    • 0.256 in(2)
    • 0.266 in(2)
    • 0.276 in(25)
    • 0.281 in(5)
    • 0.295 in(2)
    • 0.297 in(1)
    • 0.313 in(35)
    • 0.315 in(81)
    • 0.328 in(1)
    • 0.345 in(4)
    • 0.354 in(13)
    • 0.359 in(1)
    • 0.375 in(45)
    • 0.391 in(1)
    • 0.394 in(81)
    • 0.408 in(3)
    • 0.422 in(1)
    • 0.433 in(2)
    • 0.438 in(17)
    • 0.453 in(1)
    • 0.47 in(3)
    • 0.473 in(99)
    • 0.484 in(1)
    • 0.5 in(51)
    • 0.551 in(61)
    • 0.564 in(19)
    • 0.591 in(2)
    • 0.625 in(49)
    • 0.63 in(87)
    • 0.687 in(2)
    • 0.689 in(1)
    • 0.709 in(43)
    • 0.75 in(53)
    • 0.787 in(74)
    • 0.814 in(1)
    • 0.875 in(27)
    • 1.0 in(40)
    • 1.25 in(2)
    Cutting Diameter MintoCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 0.4 mm(2)
    • 0.8 mm(8)
    • 1.0 mm(7)
    • 1.201 mm(2)
    • 1.5 mm(7)
    • 1.6 mm(17)
    • 1.8 mm(1)
    • 1.975 mm(7)
    • 2.0 mm(26)
    • 2.375 mm(20)
    • 2.5 mm(16)
    • 2.776 mm(5)
    • 3.0 mm(53)
    • 3.176 mm(38)
    • 3.5 mm(13)
    • 3.575 mm(3)
    • 3.975 mm(10)
    • 4.0 mm(71)
    • 4.375 mm(2)
    • 4.5 mm(19)
    • 4.75 mm(4)
    • 4.775 mm(33)
    • 5.0 mm(67)
    • 5.15 mm(2)
    • 5.5 mm(14)
    • 5.551 mm(8)
    • 5.95 mm(2)
    • 6.0 mm(88)
    • 6.351 mm(45)
    • 6.5 mm(2)
    • 6.75 mm(2)
    • 7.0 mm(25)
    • 7.15 mm(5)
    • 7.5 mm(2)
    • 7.551 mm(1)
    • 7.95 mm(35)
    • 8.0 mm(81)
    • 8.326 mm(1)
    • 8.725 mm(4)
    • 9.0 mm(13)
    • 9.125 mm(1)
    • 9.525 mm(45)
    • 9.925 mm(1)
    • 10.0 mm(81)
    • 10.326 mm(3)
    • 10.726 mm(1)
    • 11.0 mm(2)
    • 11.125 mm(17)
    • 11.5 mm(1)
    • 11.9 mm(3)
    • 12.0 mm(99)
    • 12.3 mm(1)
    • 12.701 mm(51)
    • 14.0 mm(61)
    • 14.3 mm(19)
    • 15.0 mm(2)
    • 15.875 mm(49)
    • 16.0 mm(87)
    • 17.45 mm(2)
    • 17.475 mm(1)
    • 18.0 mm(43)
    • 19.05 mm(53)
    • 20.0 mm(74)
    • 20.651 mm(1)
    • 22.225 mm(27)
    • 25.401 mm(40)
    • 31.75 mm(2)
    Cutting Diameter MintoCutting Diameter Max
    Cutting Length
    Cutting Length
    • 0.8 mm(2)
    • 1.0 mm(2)
    • 1.5 mm(2)
    • 1.975 mm(8)
    • 2.0 mm(2)
    • 2.776 mm(3)
    • 3.0 mm(8)
    • 3.176 mm(7)
    • 4.0 mm(30)
    • 4.75 mm(17)
    • 4.775 mm(1)
    • 5.0 mm(24)
    • 6.0 mm(14)
    • 6.301 mm(14)
    • 6.351 mm(8)
    • 7.0 mm(42)
    • 7.95 mm(8)
    • 8.0 mm(47)
    • 9.0 mm(9)
    • 9.5 mm(10)
    • 9.525 mm(18)
    • 10.0 mm(40)
    • 11.0 mm(31)
    • 11.101 mm(2)
    • 12.0 mm(23)
    • 12.701 mm(36)
    • 13.0 mm(36)
    • 14.0 mm(26)
    • 14.3 mm(12)
    • 15.0 mm(6)
    • 15.875 mm(42)
    • 16.0 mm(50)
    • 18.0 mm(12)
    • 19.0 mm(51)
    • 19.05 mm(56)
    • 20.0 mm(43)
    • 20.651 mm(20)
    • 22.0 mm(54)
    • 22.225 mm(5)
    • 24.0 mm(5)
    • 25.0 mm(29)
    • 25.401 mm(78)
    • 26.0 mm(54)
    • 28.0 mm(29)
    • 28.576 mm(26)
    • 30.0 mm(6)
    • 31.0 mm(12)
    • 31.75 mm(33)
    • 32.0 mm(79)
    • 34.926 mm(3)
    • 38.0 mm(41)
    • 38.1 mm(80)
    • 40.0 mm(4)
    • 41.0 mm(8)
    • 41.276 mm(5)
    • 44.45 mm(5)
    • 45.0 mm(29)
    • 46.0 mm(1)
    • 50.0 mm(7)
    • 50.801 mm(19)
    • 56.0 mm(23)
    • 57.151 mm(35)
    • 60.0 mm(2)
    • 64.0 mm(5)
    • 65.0 mm(1)
    • 75.0 mm(43)
    • 76.2 mm(30)
    • 101.601 mm(15)
    Cutting Length MintoCutting Length Max
    Cutting Length
    Cutting Length
    • 0.031 in(2)
    • 0.039 in(2)
    • 0.06 in(2)
    • 0.078 in(8)
    • 0.079 in(2)
    • 0.109 in(3)
    • 0.119 in(8)
    • 0.125 in(7)
    • 0.157 in(30)
    • 0.187 in(17)
    • 0.188 in(1)
    • 0.197 in(24)
    • 0.237 in(14)
    • 0.248 in(14)
    • 0.25 in(8)
    • 0.276 in(42)
    • 0.313 in(8)
    • 0.315 in(47)
    • 0.354 in(9)
    • 0.374 in(10)
    • 0.375 in(18)
    • 0.394 in(40)
    • 0.433 in(31)
    • 0.437 in(2)
    • 0.473 in(23)
    • 0.5 in(36)
    • 0.512 in(36)
    • 0.551 in(26)
    • 0.564 in(12)
    • 0.591 in(6)
    • 0.625 in(42)
    • 0.63 in(50)
    • 0.709 in(12)
    • 0.748 in(51)
    • 0.75 in(56)
    • 0.787 in(43)
    • 0.814 in(20)
    • 0.866 in(54)
    • 0.875 in(5)
    • 0.946 in(5)
    • 0.984 in(29)
    • 1.0 in(78)
    • 1.024 in(54)
    • 1.102 in(29)
    • 1.125 in(26)
    • 1.181 in(6)
    • 1.22 in(12)
    • 1.25 in(33)
    • 1.26 in(79)
    • 1.375 in(3)
    • 1.496 in(41)
    • 1.5 in(80)
    • 1.575 in(4)
    • 1.614 in(8)
    • 1.625 in(5)
    • 1.75 in(5)
    • 1.772 in(29)
    • 1.811 in(1)
    • 1.969 in(7)
    • 2.0 in(19)
    • 2.205 in(23)
    • 2.25 in(35)
    • 2.362 in(2)
    • 2.52 in(5)
    • 2.559 in(1)
    • 2.953 in(43)
    • 3.0 in(30)
    • 4.0 in(15)
    Cutting Length MintoCutting Length Max
    Reach
    Reach
    • 0.091 in(1)
    • 0.098 in(2)
    • 0.128 in(2)
    • 0.13 in(1)
    • 0.15 in(2)
    • 0.157 in(6)
    • 0.176 in(3)
    • 0.177 in(1)
    • 0.197 in(6)
    • 0.202 in(2)
    • 0.205 in(1)
    • 0.208 in(2)
    • 0.217 in(1)
    • 0.218 in(2)
    • 0.228 in(4)
    • 0.23 in(2)
    • 0.247 in(2)
    • 0.255 in(1)
    • 0.267 in(1)
    • 0.272 in(8)
    • 0.276 in(7)
    • 0.28 in(1)
    • 0.286 in(1)
    • 0.288 in(1)
    • 0.289 in(2)
    • 0.291 in(7)
    • 0.303 in(1)
    • 0.307 in(3)
    • 0.308 in(2)
    • 0.315 in(11)
    • 0.341 in(4)
    • 0.343 in(2)
    • 0.354 in(3)
    • 0.355 in(2)
    • 0.37 in(1)
    • 0.371 in(2)
    • 0.372 in(1)
    • 0.374 in(3)
    • 0.394 in(3)
    • 0.397 in(5)
    • 0.398 in(1)
    • 0.433 in(20)
    • 0.473 in(1)
    • 0.484 in(1)
    • 0.492 in(3)
    • 0.494 in(4)
    • 0.497 in(2)
    • 0.5 in(1)
    • 0.503 in(3)
    • 0.504 in(2)
    • 0.508 in(1)
    • 0.512 in(10)
    • 0.517 in(1)
    • 0.531 in(2)
    • 0.539 in(5)
    • 0.551 in(1)
    • 0.555 in(2)
    • 0.556 in(2)
    • 0.559 in(4)
    • 0.576 in(3)
    • 0.577 in(1)
    • 0.584 in(3)
    • 0.591 in(6)
    • 0.601 in(2)
    • 0.602 in(2)
    • 0.614 in(3)
    • 0.621 in(3)
    • 0.622 in(4)
    • 0.63 in(7)
    • 0.657 in(2)
    • 0.661 in(1)
    • 0.674 in(1)
    • 0.694 in(4)
    • 0.695 in(2)
    • 0.709 in(3)
    • 0.72 in(1)
    • 0.721 in(2)
    • 0.732 in(6)
    • 0.733 in(1)
    • 0.734 in(1)
    • 0.736 in(1)
    • 0.74 in(2)
    • 0.744 in(1)
    • 0.745 in(1)
    • 0.748 in(7)
    • 0.752 in(1)
    • 0.76 in(2)
    • 0.77 in(1)
    • 0.771 in(1)
    • 0.787 in(5)
    • 0.805 in(3)
    • 0.809 in(2)
    • 0.811 in(2)
    • 0.839 in(2)
    • 0.843 in(1)
    • 0.846 in(1)
    • 0.848 in(1)
    • 0.85 in(1)
    • 0.866 in(8)
    • 0.89 in(2)
    • 0.891 in(1)
    • 0.894 in(1)
    • 0.909 in(1)
    • 0.929 in(4)
    • 0.93 in(5)
    • 0.937 in(1)
    • 0.942 in(2)
    • 0.946 in(2)
    • 0.95 in(2)
    • 0.958 in(2)
    • 0.968 in(1)
    • 0.969 in(1)
    • 0.974 in(1)
    • 0.976 in(1)
    • 0.984 in(6)
    • 1.016 in(1)
    • 1.024 in(11)
    • 1.055 in(2)
    • 1.102 in(4)
    • 1.127 in(3)
    • 1.181 in(1)
    • 1.205 in(1)
    • 1.22 in(2)
    • 1.23 in(1)
    • 1.232 in(1)
    • 1.233 in(1)
    • 1.244 in(1)
    • 1.26 in(15)
    • 1.266 in(1)
    • 1.278 in(1)
    • 1.283 in(1)
    • 1.286 in(1)
    • 1.319 in(1)
    • 1.33 in(1)
    • 1.37 in(1)
    • 1.447 in(1)
    • 1.449 in(1)
    • 1.496 in(11)
    • 1.539 in(2)
    • 1.6 in(2)
    • 1.614 in(2)
    • 1.772 in(5)
    • 1.803 in(1)
    • 1.969 in(2)
    • 1.979 in(1)
    • 2.13 in(1)
    • 2.132 in(1)
    • 2.205 in(5)
    • 2.362 in(1)
    • 2.953 in(11)
    Reach MintoReach Max
    Reach
    Reach
    • 2.301 mm(1)
    • 2.5 mm(2)
    • 3.25 mm(2)
    • 3.301 mm(1)
    • 3.801 mm(2)
    • 4.0 mm(6)
    • 4.476 mm(3)
    • 4.5 mm(1)
    • 5.0 mm(6)
    • 5.125 mm(2)
    • 5.176 mm(1)
    • 5.25 mm(2)
    • 5.5 mm(1)
    • 5.525 mm(2)
    • 5.801 mm(4)
    • 5.851 mm(2)
    • 6.275 mm(2)
    • 6.476 mm(1)
    • 6.775 mm(1)
    • 6.9 mm(8)
    • 7.0 mm(7)
    • 7.101 mm(1)
    • 7.25 mm(1)
    • 7.301 mm(1)
    • 7.351 mm(2)
    • 7.4 mm(7)
    • 7.7 mm(1)
    • 7.801 mm(3)
    • 7.825 mm(2)
    • 8.0 mm(11)
    • 8.65 mm(4)
    • 8.701 mm(2)
    • 9.0 mm(3)
    • 9.025 mm(2)
    • 9.4 mm(1)
    • 9.425 mm(2)
    • 9.451 mm(1)
    • 9.5 mm(3)
    • 10.0 mm(3)
    • 10.076 mm(5)
    • 10.101 mm(1)
    • 11.0 mm(20)
    • 12.0 mm(1)
    • 12.3 mm(1)
    • 12.5 mm(3)
    • 12.55 mm(4)
    • 12.625 mm(2)
    • 12.701 mm(1)
    • 12.775 mm(3)
    • 12.8 mm(2)
    • 12.9 mm(1)
    • 13.0 mm(10)
    • 13.125 mm(1)
    • 13.476 mm(2)
    • 13.701 mm(5)
    • 14.0 mm(1)
    • 14.101 mm(2)
    • 14.125 mm(2)
    • 14.201 mm(4)
    • 14.601 mm(3)
    • 14.625 mm(1)
    • 14.826 mm(3)
    • 15.0 mm(6)
    • 15.275 mm(2)
    • 15.3 mm(2)
    • 15.601 mm(3)
    • 15.775 mm(3)
    • 15.8 mm(4)
    • 16.0 mm(7)
    • 16.7 mm(2)
    • 16.8 mm(1)
    • 17.125 mm(1)
    • 17.6 mm(4)
    • 17.625 mm(2)
    • 18.0 mm(3)
    • 18.3 mm(1)
    • 18.325 mm(2)
    • 18.6 mm(6)
    • 18.625 mm(1)
    • 18.651 mm(1)
    • 18.7 mm(1)
    • 18.8 mm(2)
    • 18.901 mm(1)
    • 18.925 mm(1)
    • 19.0 mm(7)
    • 19.1 mm(1)
    • 19.3 mm(2)
    • 19.55 mm(1)
    • 19.576 mm(1)
    • 20.0 mm(5)
    • 20.451 mm(3)
    • 20.55 mm(2)
    • 20.6 mm(2)
    • 21.3 mm(2)
    • 21.401 mm(1)
    • 21.5 mm(1)
    • 21.55 mm(1)
    • 21.6 mm(1)
    • 22.0 mm(8)
    • 22.6 mm(2)
    • 22.625 mm(1)
    • 22.701 mm(1)
    • 23.1 mm(1)
    • 23.6 mm(4)
    • 23.625 mm(5)
    • 23.8 mm(1)
    • 23.901 mm(2)
    • 24.0 mm(2)
    • 24.1 mm(2)
    • 24.3 mm(2)
    • 24.576 mm(1)
    • 24.6 mm(1)
    • 24.75 mm(1)
    • 24.8 mm(1)
    • 25.0 mm(6)
    • 25.776 mm(1)
    • 26.0 mm(11)
    • 26.8 mm(2)
    • 28.0 mm(4)
    • 28.6 mm(3)
    • 30.0 mm(1)
    • 30.6 mm(1)
    • 31.0 mm(2)
    • 31.25 mm(1)
    • 31.3 mm(1)
    • 31.326 mm(1)
    • 31.6 mm(1)
    • 32.0 mm(15)
    • 32.15 mm(1)
    • 32.426 mm(1)
    • 32.6 mm(1)
    • 32.676 mm(1)
    • 33.5 mm(1)
    • 33.775 mm(1)
    • 34.801 mm(1)
    • 36.75 mm(1)
    • 36.801 mm(1)
    • 38.0 mm(11)
    • 39.1 mm(2)
    • 40.651 mm(2)
    • 41.0 mm(2)
    • 45.0 mm(5)
    • 45.801 mm(1)
    • 50.0 mm(2)
    • 50.276 mm(1)
    • 54.1 mm(1)
    • 54.125 mm(1)
    • 56.0 mm(5)
    • 60.0 mm(1)
    • 75.0 mm(11)
    Reach MintoReach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 45.0 (5)
    • 90.0 (1523)
    Tool Cutting Edge Angle MintoTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • Straight-Cylindrical (1254)
    • Weldon (244)
    • Weldon Short (30)
    Number of Flutes
    Number of Flutes
    • 2 (539)
    • 3 (331)
    • 4 (658)
    Over All Length [L]
    Over All Length [L]
    • 1.496 in(67)
    • 1.5 in(83)
    • 1.693 in(7)
    • 1.969 in(100)
    • 2.0 in(62)
    • 2.126 in(46)
    • 2.136 in(1)
    • 2.165 in(6)
    • 2.244 in(97)
    • 2.25 in(5)
    • 2.283 in(19)
    • 2.48 in(89)
    • 2.5 in(105)
    • 2.598 in(14)
    • 2.638 in(1)
    • 2.75 in(5)
    • 2.835 in(33)
    • 2.874 in(15)
    • 2.953 in(69)
    • 2.992 in(20)
    • 3.0 in(81)
    • 3.228 in(14)
    • 3.25 in(1)
    • 3.269 in(60)
    • 3.307 in(13)
    • 3.5 in(35)
    • 3.504 in(32)
    • 3.622 in(69)
    • 3.938 in(72)
    • 4.0 in(108)
    • 4.094 in(34)
    • 4.331 in(15)
    • 4.5 in(3)
    • 4.921 in(16)
    • 5.0 in(35)
    • 5.906 in(45)
    • 6.0 in(36)
    • 7.0 in(15)
    Over All Length [L] MintoOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 38.0 mm(67)
    • 38.1 mm(83)
    • 43.0 mm(7)
    • 50.0 mm(100)
    • 50.801 mm(62)
    • 54.0 mm(46)
    • 54.25 mm(1)
    • 55.0 mm(6)
    • 57.0 mm(97)
    • 57.151 mm(5)
    • 58.0 mm(19)
    • 63.0 mm(89)
    • 63.5 mm(105)
    • 66.0 mm(14)
    • 67.0 mm(1)
    • 69.851 mm(5)
    • 72.0 mm(33)
    • 73.0 mm(15)
    • 75.0 mm(69)
    • 76.0 mm(20)
    • 76.2 mm(81)
    • 82.0 mm(14)
    • 82.551 mm(1)
    • 83.0 mm(60)
    • 84.0 mm(13)
    • 88.9 mm(35)
    • 89.0 mm(32)
    • 92.0 mm(69)
    • 100.0 mm(72)
    • 101.601 mm(108)
    • 104.0 mm(34)
    • 110.0 mm(15)
    • 114.301 mm(3)
    • 125.0 mm(16)
    • 127.0 mm(35)
    • 150.0 mm(45)
    • 152.4 mm(36)
    • 177.8 mm(15)
    Over All Length [L] MintoOver All Length [L] Max
    Corner configuration
    Corner Style
    Corner Style
    • BALL NOSE (280)
    • CHAMFER (307)
    • RADIUS (162)
    • SQUARE END (772)
    • TORUS (1)
    Corner Radius
    Corner Radius
    • 0.0 in(1085)