successfully added to cart
View Cart

Notifications

Mark all as read

Laydown Threading

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Select First Choice
  • US (6)
Applications
  • ID Thread Turning ID Thread Turning (132)
  • OD Thread Turning OD Thread Turning (125)
  • Profiling Profiling (10)
  • TRN Boring TRN Boring (5)
  • Threading Threading (30)
Workpiece Material
  • P Steel (361)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (361)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (361)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (361)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (361)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (361)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (361)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (361)
  • M Stainless Steel (361)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (361)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (361)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (361)
  • K Cast Iron (361)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (361)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (361)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (361)
  • N Non-Ferrous Materials (360)
    • N1
      Wrought Aluminum
      (360)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (360)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (360)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (20)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (360)
    • N6
      Carbon, Graphite Composites, CFRP
      (360)
    • N7
      MMC's
      (20)
  • S High-Temp Alloys (361)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (361)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (361)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (361)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (361)
  • H Hardened Materials (20)
    • H1
      Hardened Materials 44-48 HRC
      (20)
Type of Thread
  • 55 (89)
  • 60 (109)
  • ACME (17)
  • API (6)
  • API BUTTRESS (5)
  • API RD (12)
  • BSPT (16)
  • BSW (120)
  • M (205)
  • NPT (62)
  • NPTF (16)
  • RD DIN 405 (88)
  • STUB ACME (17)
  • TR DIN 103 (90)
  • UN (113)
  • UNJ (16)
Tool Cutting Edge Angle
  • 90.0 (97)
to
Connection Style
  • Boring Bar Shank (42)
  • KM (23)
  • Toolholder (31)
Cutting Edges Per Insert
  • 3.0 (385)
to
Internal Coolant Capability
Corner configuration
Corner Radius
  • 0.03 (6)
  • 0.033 (2)
  • 0.038 (5)
  • 0.04 (2)
  • 0.05 (1)
  • 0.051 (84)
  • 0.056 (15)
  • 0.07 (22)
  • 0.071 (1)
  • 0.073 (1)
  • 0.076 (30)
  • 0.08 (19)
  • 0.081 (5)
  • 0.082 (14)
  • 0.085 (14)
  • 0.086 (1)
  • 0.091 (1)
  • 0.094 (1)
  • 0.097 (5)
  • 0.1 (14)
  • 0.102 (5)
  • 0.108 (16)
  • 0.135 (1)
  • 0.152 (23)
  • 0.159 (1)
  • 0.16 (5)
  • 0.178 (1)
  • 0.2 (6)
  • 0.203 (24)
  • 0.21 (33)
  • 0.223 (1)
  • 0.225 (2)
  • 0.226 (1)
  • 0.23 (2)
  • 0.24 (14)
  • 0.269 (1)
  • 0.279 (26)
  • 0.3 (2)
  • 0.305 (10)
  • 0.31 (10)
  • 0.318 (1)
  • 0.381 (1)
  • 0.432 (15)
  • 0.51 (1)
  • 0.533 (7)
  • 0.61 (1)
  • 0.64 (2)
  • 0.69 (2)
  • 0.7 (18)
  • 0.755 (2)
  • 0.76 (15)
  • 0.93 (7)
  • 0.936 (17)
  • 0.97 (1)
  • 1.01 (6)
  • 1.404 (7)
  • 1.515 (6)
to
Corner Radius
  • 0.0012 (6)
  • 0.0013 (2)
  • 0.0015 (5)
  • 0.0016 (2)
  • 0.002 (85)
  • 0.0028 (23)
  • 0.0029 (1)
  • 0.003 (30)
  • 0.0031 (14)
  • 0.0032 (19)
  • 0.0033 (14)
  • 0.0034 (1)
  • 0.0037 (1)
  • 0.0038 (5)
  • 0.0039 (14)
  • 0.004 (5)
  • 0.0043 (16)
  • 0.0053 (1)
  • 0.006 (23)
  • 0.0063 (6)
  • 0.007 (1)
  • 0.0079 (1)
  • 0.008 (29)
  • 0.0083 (33)
  • 0.0088 (1)
  • 0.0089 (3)
  • 0.0091 (2)
  • 0.0094 (14)
  • 0.0106 (1)
  • 0.011 (26)
  • 0.012 (12)
  • 0.0122 (10)
  • 0.0125 (1)
  • 0.015 (1)
  • 0.017 (15)
  • 0.02 (1)
  • 0.021 (7)
  • 0.022 (15)
  • 0.024 (1)
  • 0.025 (2)
  • 0.0272 (2)
  • 0.0276 (18)
  • 0.0297 (2)
  • 0.0298 (14)
  • 0.03 (1)
  • 0.0368 (7)
  • 0.0369 (17)
  • 0.038 (1)
  • 0.0398 (6)
  • 0.0553 (7)
  • 0.0597 (6)
to
Application
Grade Of Cutting Tool
  • HCK20 (17)
  • HCM15 (11)
  • K15 (66)
  • K68 (8)
  • KC5010 (10)
  • KC5025 (22)
  • KC710 (9)
  • KC720 (19)
  • KC722 (8)
  • KC730 (20)
  • KC9105 (1)
  • KU25T (8)
  • P25 (40)
  • PN120 (15)
  • SP4066 (5)
  • TN6025 (360)
  • TTS (15)
Hand Of Tool
  • L (37)
  • R (59)
Minimum Axial Groove Diameter
  • 0.5 (4)
  • 0.5118 (6)
  • 0.6299 (4)
  • 0.65 (4)
  • 0.7874 (4)
  • 0.8 (4)
  • 0.9 (4)
  • 0.9449 (2)
  • 0.9843 (2)
  • 1.063 (1)
  • 1.1417 (4)
  • 1.2 (2)
  • 1.2598 (5)
  • 1.4173 (1)
  • 1.45 (1)
  • 1.5354 (1)
  • 1.5748 (5)
  • 1.7323 (1)
  • 2.126 (4)
  • 2.2835 (1)
to
Minimum Axial Groove Diameter
  • 12.7 (4)
  • 13.0 (6)
  • 16.0 (4)
  • 16.51 (4)
  • 20.0 (4)
  • 20.32 (4)
  • 22.86 (4)
  • 24.0 (2)
  • 25.0 (2)
  • 27.0 (1)
  • 29.0 (4)
  • 30.48 (2)
  • 32.0 (5)
  • 36.0 (1)
  • 36.83 (1)
  • 39.0 (1)
  • 40.0 (5)
  • 44.0 (1)
  • 54.0 (4)
  • 58.0 (1)
to
Countersunk Angle
  • 15.0 (23)
  • 27.5 (35)
  • 30.0 (140)
to
Cutting Direction
  • E (43)
  • S (53)
Rake Angle Style
  • DOUBLE NEGATIVE (95)
  • POSITIVE-ZERO (1)
Maximum Bore Depth
  • 25.0 (1)
  • 25.4 (2)
  • 31.75 (2)
  • 32.0 (1)
  • 35.16 (2)
  • 38.1 (3)
  • 40.0 (4)
  • 42.0 (1)
  • 42.21 (1)
  • 45.0 (1)
  • 48.0 (1)
  • 56.11 (2)
  • 57.15 (2)
  • 60.0 (4)
  • 63.5 (2)
  • 70.02 (2)
  • 75.04 (2)
  • 76.2 (4)
  • 80.0 (5)
  • 95.25 (2)
  • 96.02 (4)
  • 100.0 (4)
  • 114.3 (2)
  • 127.0 (1)
  • 128.0 (3)
  • 160.0 (1)
  • 200.0 (1)
to
Maximum Bore Depth
  • 0.9843 (1)
  • 1.0 (2)
  • 1.25 (2)
  • 1.2598 (1)
  • 1.3842 (2)
  • 1.5 (3)
  • 1.5748 (1)
  • 1.575 (3)
  • 1.6535 (1)
  • 1.6618 (1)
  • 1.772 (1)
  • 1.8896 (1)
  • 2.209 (2)
  • 2.25 (2)
  • 2.3622 (3)
  • 2.3624 (1)
  • 2.5 (2)
  • 2.7567 (2)
  • 2.9543 (2)
  • 3.0 (4)
  • 3.1496 (5)
  • 3.75 (2)
  • 3.7803 (4)
  • 3.9372 (4)
  • 4.5 (2)
  • 5.0 (1)
  • 5.0392 (3)
  • 6.2992 (1)
  • 7.874 (1)
to
Boring Bar Material
  • C (8)
  • S (51)
Wiper Insert
  • N (385)
Front-End
Clamp Style
  • C (26)
  • M (8)
  • S (63)
Insert Shape
  • LT-TRIANGLE LAY DOWN THREAD 60 (388)
  • ON EDGE MISC (5)
Thread TPI
  • 3.0 (1)
  • 4.0 (8)
  • 4.5 (4)
  • 5.0 (2)
  • 6.0 (6)
  • 7.0 (7)
  • 8.0 (14)
  • 9.0 (1)
  • 10.0 (8)
  • 11.0 (8)
  • 11.5 (3)
  • 12.0 (7)
  • 13.0 (2)
  • 14.0 (20)
  • 16.0 (7)
  • 18.0 (8)
  • 19.0 (4)
  • 20.0 (3)
  • 24.0 (3)
  • 26.0 (1)
  • 27.0 (4)
  • 28.0 (5)
  • 32.0 (5)
  • 36.0 (4)
  • 40.0 (1)
  • 48.0 (21)
  • 56.0 (1)
  • 64.0 (1)
to
Thread TPI
  • 3.0 (1)
  • 4.0 (8)
  • 4.5 (4)
  • 5.0 (2)
  • 6.0 (6)
  • 7.0 (7)
  • 8.0 (14)
  • 9.0 (1)
  • 10.0 (8)
  • 11.0 (8)
  • 11.5 (3)
  • 12.0 (7)
  • 13.0 (2)
  • 14.0 (20)
  • 16.0 (7)
  • 18.0 (8)
  • 19.0 (4)
  • 20.0 (3)
  • 24.0 (3)
  • 26.0 (1)
  • 27.0 (4)
  • 28.0 (5)
  • 32.0 (5)
  • 36.0 (4)
  • 40.0 (1)
  • 48.0 (21)
  • 56.0 (1)
  • 64.0 (1)
to
Thread Pitch
  • 0.35 (4)
  • 0.4 (3)
  • 0.45 (1)
  • 0.5 (8)
  • 0.6 (4)
  • 0.7 (4)
  • 0.75 (9)
  • 0.8 (7)
  • 1.0 (7)
  • 1.25 (8)
  • 1.5 (28)
  • 1.75 (10)
  • 2.0 (8)
  • 2.5 (6)
  • 3.0 (26)
  • 3.5 (5)
  • 4.0 (9)
  • 4.5 (3)
  • 5.0 (13)
  • 5.5 (3)
  • 6.0 (9)
to
Thread Pitch
  • 0.35 (4)
  • 0.4 (3)
  • 0.45 (1)
  • 0.5 (8)
  • 0.6 (4)
  • 0.7 (4)
  • 0.75 (9)
  • 0.8 (7)
  • 1.0 (7)
  • 1.25 (8)
  • 1.5 (28)
  • 1.75 (10)
  • 2.0 (8)
  • 2.5 (6)
  • 3.0 (26)
  • 3.5 (5)
  • 4.0 (9)
  • 4.5 (3)
  • 5.0 (13)
  • 5.5 (3)
  • 6.0 (9)
to
Insert Geometry
Shape
  • LT-TRIANGLE LAY DOWN THREAD 60 (296)
Insert IC Size
  • 0.25 (38)
  • 0.375 (166)
  • 0.5 (40)
  • 0.625 (9)
to
Insert IC Size
  • 6.35 (38)
  • 9.525 (166)
  • 12.7 (40)
  • 15.875 (9)
to
Insert Seat Size
  • 2 (53)
  • 3 (184)
  • 4 (40)
  • 5 (19)
Cutting Tool Material
  • H W (342)
Back-End
Connection Type
  • BORING BAR (41)
  • CYLINDRICAL (1)
  • SQUARE SHANK (31)
  • TAPER SHANK (23)
System Size
  • KM40TS (23)
Back-End Diameter
  • 0.375 (3)
  • 0.4724 (1)
  • 0.5 (2)
  • 0.5906 (1)
  • 0.625 (2)
  • 0.75 (10)
  • 0.7874 (8)
  • 0.9843 (4)
  • 1.25 (3)
  • 1.2598 (6)
  • 1.5748 (25)
  • 1.9685 (1)
to
Back-End Diameter
  • 9.525 (3)
  • 12.0 (1)
  • 12.7 (2)
  • 15.0 (1)
  • 15.875 (2)
  • 19.05 (10)
  • 20.0 (8)
  • 25.0 (4)
  • 31.75 (3)
  • 32.0 (6)
  • 40.0 (25)
  • 50.0 (1)
to
other
Grade
  • HCK20 (1)
  • HCM15 (1)
  • K15 (14)
  • P25 (4)
  • PN120 (2)
  • TN6025 (272)
  • TTS (2)
  • W (57)
Platform
  • KM40 (23)
  • Laydown Threading (164)
Tool Unit
  • I (333)
  • M (356)
Display Configurable Products
  • false (393)
Over All Length [L]
  • 40.0 (7)
  • 45.0 (3)
  • 60.0 (2)
  • 70.0 (2)
  • 75.0 (1)
  • 80.0 (2)
  • 82.55 (2)
  • 90.0 (2)
  • 100.0 (6)
  • 110.0 (4)
  • 125.0 (1)
  • 127.0 (4)
  • 128.0 (1)
  • 136.0 (1)
  • 150.0 (1)
  • 152.4 (13)
  • 153.0 (1)
  • 155.0 (1)
  • 173.0 (1)
  • 175.0 (1)
  • 176.0 (1)
  • 177.8 (9)
  • 180.0 (8)
  • 200.0 (4)
  • 203.2 (2)
  • 205.0 (1)
  • 206.0 (1)
  • 250.0 (6)
  • 254.0 (7)
  • 300.0 (1)
  • 350.0 (1)
to
Over All Length [L]
  • 1.5748 (4)
  • 1.575 (3)
  • 1.7717 (2)
  • 1.772 (1)
  • 2.3622 (2)
  • 2.7559 (2)
  • 2.9528 (1)
  • 3.1496 (2)
  • 3.25 (2)
  • 3.5433 (2)
  • 3.937 (6)
  • 4.3307 (4)
  • 4.9213 (1)
  • 5.0 (4)
  • 5.0394 (1)
  • 5.3543 (1)
  • 5.9055 (1)
  • 6.0 (13)
  • 6.0236 (1)
  • 6.1024 (1)
  • 6.811 (1)
  • 6.8898 (1)
  • 6.9291 (1)
  • 7.0 (9)
  • 7.0866 (8)
  • 7.874 (4)
  • 8.0 (2)
  • 8.0709 (1)
  • 8.1102 (1)
  • 9.8425 (6)
  • 10.0 (7)
  • 11.811 (1)
  • 13.7795 (1)
to
Insert Hand
  • L (152)
  • R (234)
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

Laydown Threading

Toolholders
(7 Products)
  • ThreadingThreading
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade Insert Size [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [L2] Head Length [L2] Head Length Gage Insert Shim Screw ID Drive Size Clamp Screw ID Drive Size Insert Screw ID Drive Size
2968591 LSSR123D LSSR123D   W 3 19.0500 .7500 19.0500 .7500 25.4000 1.000 152.4000 6.000 25.4000 1.000 LT16ER T10 T15 T10
    List price:
    $116.42 /each.
    Your price::
    Qty
    2968592 LSSR163D LSSR163D   W 3 25.4000 1.000 25.4000 1.000 31.7500 1.250 152.4000 6.000 25.4000 1.000 LT16ER T10 T15 T10
      List price:
      $123.67 /each.
      Your price::
      Qty
      2968593 LSSR164D LSSR164D   W 4 25.4000 1.000 25.4000 1.000 31.7500 1.250 152.4000 6.000 30.4800 1.200 LT22ER T20 T20 T20
        List price:
        $126.98 /each.
        Your price::
        Qty
        2968594 LSSR203D LSSR203D   W 3 31.7500 1.250 31.7500 1.250 38.1000 1.500 152.4000 6.000 25.4000 1.000 LT16ER T10 T15 T10
          List price:
          $136.94 /each.
          Your price::
          Qty
          2968588 LSSL123D LSSL123D   W 3 19.0500 .7500 19.0500 .7500 25.4000 1.000 152.4000 6.000 25.4000 1.000 LT16EL T10 T15 T10
            Your price::
            Qty
            2968589 LSSL163D LSSL163D   W 3 25.4000 1.000 25.4000 1.000 31.7500 1.250 152.4000 6.000 25.4000 1.000 LT16EL T10 T15 T10
              Your price::
              Qty
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Qty

              Sold in pkg. of

              ORIGINAL PRODUCT

              Laydown Threading

              Toolholders
              (11 Products)
              • ThreadingThreading
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade Insert Size [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [L2] Head Length [L2] Head Length Gage Insert Shim Screw ID Drive Size Clamp Screw ID Drive Size Insert Screw ID Drive Size
              2968585 LSASR163 LSASR163   W 3 25.4000 1.000 25.4000 1.000 25.4000 1.000 152.4000 6.000 30.480 1.200 LT16ER T10 T15 T10
                List price:
                $111.21 /each.
                Your price::
                Qty
                2968567 LSASR83 LSASR83   W 3 12.7000 .5000 12.7000 .5000 12.7000 .5000 82.5500 3.250 22.098 .8700 LT16ER T10   T10
                  List price:
                  $90.98 /each.
                  Your price::
                  Qty
                  2968570 LSASL163 LSASL163   W 3 25.4000 1.000 25.4000 1.000 25.4000 1.000 152.4000 6.000 30.480 1.200 LT16EL T10 T15 T10
                    List price:
                    $111.21 /each.
                    Your price::
                    Qty
                    2968584 LSASR123 LSASR123   W 3 19.0500 .7500 19.0500 .7500 19.0500 .7500 127.0000 5.000 30.480 1.200 LT16ER T10 T15 T10
                      List price:
                      $107.71 /each.
                      Your price::
                      Qty