Product Suggestions

Product Family suggestions

Quick Order Page
successfully added to cart
View Cart

Notifications

Mark all as read
Mobile Menu

M680

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (183)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (183)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (183)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (183)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (177)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (177)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (173)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (173)
  • M Stainless Steel (161)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (161)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (161)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (161)
  • K Cast Iron (197)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (197)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (194)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (194)
  • N Non-Ferrous Materials (89)
    • N1
      Wrought Aluminum
      (89)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (89)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (89)
  • S High-Temp Alloys (106)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (91)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (91)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (91)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (106)
  • H Hardened Materials (69)
    • H1
      Hardened Materials 44-48 HRC
      (69)
    • H2
      Hardened Materials 48-55 HRC
      (60)
    • H3
      Hardened Materials 56-60 HRC
      (60)
Select All Star
  • CN (31)
  • DE (56)
  • GB (8)
  • IN (29)
  • SG (10)
Applications
Applications
  • Face Milling Face Milling (61)
  • Pocket Pocket (8)
  • Pocket Milling Pocket Milling (8)
  • Pocket Plunge Milling Pocket Plunge Milling (8)
  • Ramping Ramping (8)
  • Shoulder Milling Shoulder Milling (61)
  • Shoulder Roughing Shoulder Roughing (8)
  • Shoulder Square End Shoulder Square End (51)
  • Slot Milling Slot Milling (61)
  • Slot Side Slot Side (8)
  • Slot Square End Slot Square End (59)
Cutting Diameter
Cutting Diameter
  • 0.625 in (1)
  • 0.63 in (2)
  • 0.75 in (3)
  • 0.787 in (3)
  • 0.984 in (6)
  • 1.0 in (9)
  • 1.25 in (5)
  • 1.26 in (6)
  • 1.379 in (1)
  • 1.5 in (9)
  • 1.575 in (5)
  • 1.969 in (3)
  • 2.0 in (4)
  • 2.48 in (2)
  • 2.5 in (2)
  • 3.0 in (1)
  • 3.15 in (1)
  • 3.938 in (1)
  • 4.0 in (4)
  • 4.921 in (1)
  • 5.0 in (2)
  • 6.0 in (2)
  • 6.299 in (1)
  • 8.0 in (1)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 15.875 mm (1)
  • 16.0 mm (2)
  • 19.05 mm (3)
  • 20.0 mm (3)
  • 25.0 mm (6)
  • 25.401 mm (9)
  • 31.75 mm (5)
  • 32.0 mm (6)
  • 35.0 mm (1)
  • 38.1 mm (9)
  • 40.0 mm (5)
  • 50.0 mm (3)
  • 50.801 mm (4)
  • 63.0 mm (2)
  • 63.5 mm (2)
  • 76.2 mm (1)
  • 80.0 mm (1)
  • 100.0 mm (1)
  • 101.601 mm (4)
  • 125.0 mm (1)
  • 127.0 mm (2)
  • 152.4 mm (2)
  • 160.0 mm (1)
  • 203.201 mm (1)
Cutting Diameter Min to Cutting Diameter Max
Cutting Length
Cutting Length
  • 8.9 mm (3)
  • 9.0 mm (12)
  • 9.5 mm (9)
  • 13.976 mm (37)
  • 14.0 mm (12)
  • 15.3 mm (1)
  • 15.351 mm (1)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 0.351 in (3)
  • 0.354 in (12)
  • 0.374 in (9)
  • 0.55 in (37)
  • 0.551 in (12)
  • 0.602 in (1)
  • 0.604 in (1)
Cutting Length Min to Cutting Length Max
Reach
Reach
  • 1.063 in (1)
  • 1.071 in (1)
  • 1.181 in (2)
  • 1.186 in (1)
  • 1.25 in (1)
  • 1.26 in (2)
  • 1.286 in (1)
  • 1.469 in (1)
  • 1.47 in (1)
  • 1.5 in (3)
  • 1.536 in (2)
  • 1.566 in (1)
  • 1.567 in (1)
  • 1.575 in (15)
  • 1.67 in (1)
  • 1.72 in (5)
  • 1.75 in (2)
  • 1.772 in (1)
  • 1.969 in (4)
  • 2.0 in (8)
  • 2.025 in (1)
  • 2.119 in (1)
  • 2.12 in (2)
  • 2.25 in (1)
  • 2.45 in (1)
  • 2.48 in (2)
  • 2.5 in (3)
  • 2.719 in (1)
  • 2.721 in (1)
  • 3.0 in (2)
  • 3.72 in (1)
  • 4.0 in (1)
  • 4.12 in (1)
  • 6.0 in (2)
  • 6.12 in (1)
Reach Min to Reach Max
Reach
Reach
  • 27.0 mm (1)
  • 27.201 mm (1)
  • 30.0 mm (2)
  • 30.125 mm (1)
  • 31.75 mm (1)
  • 32.0 mm (2)
  • 32.676 mm (1)
  • 37.325 mm (1)
  • 37.35 mm (1)
  • 38.1 mm (3)
  • 39.0 mm (2)
  • 39.776 mm (1)
  • 39.801 mm (1)
  • 40.0 mm (15)
  • 42.426 mm (1)
  • 43.676 mm (2)
  • 43.7 mm (3)
  • 44.45 mm (2)
  • 45.0 mm (1)
  • 50.0 mm (4)
  • 50.801 mm (8)
  • 51.426 mm (1)
  • 53.825 mm (1)
  • 53.85 mm (2)
  • 57.151 mm (1)
  • 62.225 mm (1)
  • 63.0 mm (2)
  • 63.5 mm (3)
  • 69.075 mm (1)
  • 69.101 mm (1)
  • 76.2 mm (2)
  • 94.5 mm (1)
  • 101.601 mm (1)
  • 104.65 mm (1)
  • 152.4 mm (2)
  • 155.451 mm (1)
Reach Min to Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (67)
  • 90.25 (2)
  • 90.28 (2)
  • 90.4 (4)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • A-Socket Head Cap Screw (22)
  • B-Cutter Retention Screw (3)
  • C-Bolt Circle (1)
  • SHCS or RetScrw Or BoltCircle (1)
  • Screw-On Connection (6)
  • Straight-Cylindrical (9)
  • Weldon (33)
Number of Flutes
Number of Flutes
  • 1 (1)
  • 10 (1)
  • 12 (2)
  • 2 (17)
  • 3 (21)
  • 4 (13)
  • 5 (9)
  • 6 (5)
  • 7 (2)
  • 8 (3)
  • 9 (1)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 2.0 (252)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Corner configuration
Corner Radius
Corner Radius
  • 0.016 in (58)
  • 0.031 in (137)
  • 0.047 in (115)
  • 0.063 in (66)
  • 0.066 in (48)
  • 0.079 in (63)
  • 0.098 in (49)
  • 0.125 in (51)
  • 0.157 in (49)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.4 mm (58)
  • 0.8 mm (137)
  • 1.201 mm (115)
  • 1.6 mm (66)
  • 1.675 mm (48)
  • 2.0 mm (63)
  • 2.5 mm (49)
  • 3.176 mm (51)
  • 4.0 mm (49)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (252)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (252)
Corner Chamfer Min to Corner Chamfer Max
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • THM (75)
  • THM-U (45)
  • THR (56)
  • TN2510 (60)
  • TN25M (58)
  • TN450 (75)
  • TN5515 (80)
  • TN6501 (55)
  • TN6502 (54)
  • TN6510 (56)
  • TN6520 (57)
  • TN6525 (61)
  • TN6540 (61)
  • TN7525 (79)
  • TN7535 (80)
  • TTI25 (70)
  • TTM (11)
  • TTM08 (58)
  • TTR (43)
  • WK15CM (79)
  • WK15PM (13)
  • WP35CM (78)
  • WP40PM (49)
  • WS30PM (44)
  • WU20PM (61)
Hand Of Tool
Hand Of Tool
  • R (75)
Rough Finish
Rough Finish
  • FR (7)
Wiper Insert
Wiper Insert
  • N (189)
Front-End
Insert Shape
Insert Shape
  • A-PARALLELOGRAM 85 (39)
  • X-PARALLELOGRAM 80 (201)
  • X-RECTANGLE MILL 4 90 (43)
  • X-RH0MBIC 70 (23)
Center Cutting
Center Cutting
Insert Geometry
Shape
Shape
  • A-PARALLELOGRAM 85 (30)
  • X-PARALLELOGRAM 80 (147)
  • X-RECTANGLE MILL 4 90 (1)
  • X-RH0MBIC 70 (11)
Insert IC Size
Insert IC Size
  • 9.525 mm (8)
Insert IC Size Min to Insert IC Size Max
Insert IC Size
Insert IC Size
  • 0.375 in (8)
Insert IC Size Min to Insert IC Size Max
Cutting Edge Length
Cutting Edge Length
  • 8.875 mm (1)
  • 8.951 mm (1)
  • 9.0 mm (1)
  • 9.175 mm (1)
  • 9.451 mm (1)
  • 9.475 mm (12)
  • 9.875 mm (2)
  • 10.375 mm (12)
  • 10.451 mm (18)
  • 15.675 mm (115)
  • 15.775 mm (9)
  • 15.875 mm (11)
Cutting Edge Length Min to Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 0.35 in (1)
  • 0.352 in (1)
  • 0.354 in (1)
  • 0.361 in (1)
  • 0.372 in (1)
  • 0.373 in (12)
  • 0.389 in (2)
  • 0.409 in (12)
  • 0.412 in (18)
  • 0.617 in (115)
  • 0.621 in (9)
  • 0.625 in (11)
Cutting Edge Length Min to Cutting Edge Length Max
Chip Breaker CBMD
Chip Breaker CBMD
  • AL (10)
  • ALP (6)
  • GE (27)
  • MH (9)
  • ML (12)
  • MM (11)
  • MR (10)
Cutting Tool Material
Cutting Tool Material
  • H T (7)
  • H W (182)
Tolerance Class
Tolerance Class
  • H (146)
  • M (2)
  • N (41)
Back-End
Connection Type
Connection Type
  • CYLINDRICAL (42)
  • SCREW-ON (6)
  • SHELL MILL (27)
Back-End Diameter
Back-End Diameter
  • 15.875 mm (1)
  • 16.0 mm (2)
  • 19.05 mm (8)
  • 20.0 mm (3)
  • 22.0 mm (7)
  • 24.375 mm (1)
  • 25.0 mm (5)
  • 25.401 mm (8)
  • 27.0 mm (1)
  • 28.0 mm (3)
  • 31.75 mm (16)
  • 32.0 mm (8)
  • 38.1 mm (4)
  • 40.0 mm (2)
  • 50.801 mm (5)
  • 63.5 mm (1)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.625 in (1)
  • 0.63 in (2)
  • 0.75 in (8)
  • 0.787 in (3)
  • 0.866 in (7)
  • 0.96 in (1)
  • 0.984 in (5)
  • 1.0 in (8)
  • 1.063 in (1)
  • 1.102 in (3)
  • 1.25 in (16)
  • 1.26 in (8)
  • 1.5 in (4)
  • 1.575 in (2)
  • 2.0 in (5)
  • 2.5 in (1)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
Narrow by category:
View Products in
Metric
Inch

ORIGINAL PRODUCT

M680-16 • Shell Mills • Metric M680-16 • Shell Mills • Metric

Shell Mills • Metric
(8 Products)
  • Milling - Side and FaceMilling - Side and Face
  • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
  • Slotting: Square EndSlotting: Square End
  • Face MillingFace Milling
  • Milling - Through CoolantMilling - Through Coolant
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D6] Hub Diameter [D6] Hub Diameter [L] Overall Length [L] Overall Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Max RPM Coolant Supply Weight Kilograms
2003535 12396903600 12396903600 W   40.0000 1.575 22.0 .8661 38.9900 1.535 45.0000 1.772 15.2970 .6022 4 14000 Y 0.23
    List price:
    C$462.84 /each
    Your price:
    2003553 12396903800 12396903800 W   50.0000 1.969 22.0 .8661 42.0000 1.654 40.0000 1.575 14.0000 .5510 4 12500 Y 0.30
      List price:
      C$540.13 /each
      Your price:
      2003554 12396904000 12396904000 W   50.0000 1.969 22.0 .8661 42.0000 1.654 40.0000 1.575 14.0000 .5512 5 12500 Y 0.30
        List price:
        C$582.63 /each
        Your price:
        2003561 12396904200 12396904200 W   63.0000 2.480 22.0 .8661 50.0000 1.969 40.0000 1.575 14.0000 .5510 5 11000 Y 0.50
          List price:
          C$635.08 /each
          Your price:
          2003578 12396904600 12396904600 W   80.0000 3.150 27.0 1.063 60.0000 2.362 50.0000 1.969 14.0000 .5510 6 9500 Y 1.00
            List price:
            C$716.93 /each
            Your price:
            2003594 12396905000 12396905000 W   100.0000 3.937 32.0 1.259 78.0000 3.071 50.0000 1.969 14.0000 .5510 8 8500 N 1.40
              List price:
              C$854.01 /each
              Your price:
              List price:
              Discount: %
              Your price:
              Replacement This item is no longer available
              Replacement Product Please contact customer service for assistance

              ORIGINAL PRODUCT

              M680-16 • Weldon® End Mills • Metric M680-16 • Weldon® End Mills • Metric

              Weldon® End Mills • Metric
              (3 Products)
              • Shank - Cylindrical Weldon 2 FlatShank - Cylindrical Weldon 2 Flat
              • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
              • Slotting: Square EndSlotting: Square End
              • Face MillingFace Milling
              • Milling - Through CoolantMilling - Through Coolant
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Max RPM Coolant Supply Weight Kilograms
              2003475 12396922600 12396922600 W   25.0000 .9840 25.0 .9843 96.0000 3.779 39.0000 1.535 13.9700 .5500 2 17600 Y 0.30
                List price:
                C$364.95 /each
                Your price:
                2003515 12396923000 12396923000 W   32.0000 1.260 32.0 1.259 100.0000 3.937 39.0000 1.535 15.3600 .6046 3 15600 Y 0.51
                  List price:
                  C$410.29 /each
                  Your price:
                  2003539 12396923400 12396923400 W   40.0000 1.575 32.0 1.259 110.0000 4.331 50.0000 1.969 14.0000 .5512 4 14000 Y 0.80
                    List price:
                    C$510.50 /each
                    Your price:
                    List price:
                    Discount: %
                    Your price:
                    Replacement This item is no longer available
                    Replacement Product Please contact customer service for assistance

                    ORIGINAL PRODUCT

                    M680-16 • Screw-On End Mills • Metric M680-16 • Screw-On End Mills • Metric

                    Screw-On End Mills • Metric
                    (4 Products)
                    • Shank - Screw-OnShank - Screw-On
                    • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
                    • Slotting: Square EndSlotting: Square End
                    • Face MillingFace Milling
                    • Milling - Through CoolantMilling - Through Coolant
                    View Products
                    SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [DPM] Pilot Diameter Machine Side [DPM] Pilot Diameter Machine Side [G3X] Connection Thread Size External [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length [WF] Width of Flat [WF] Width of Flat [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Max RPM Coolant Supply Weight Kilograms
                    2003477 12396932600 12396932600 W   25.0000 .9840 24.37 .9594 12.5000 .4921 M12 52.0000 2.047 30.0000 1.181 19.0000 .7480 14.0000 .5512 2 8800 Y 0.20
                      List price:
                      C$368.52 /each
                      Your price:
                      2003517 12396933000 12396933000 W   32.0000 1.260 28.0 1.102 17.0000 .6693 M16 63.0000 2.480 40.0000 1.575 22.0000 .8661 14.0000 .5512 3 7800 Y 0.30
                        List price:
                        C$388.33 /each
                        Your price:
                        2003521 12396933200 12396933200 W   35.0000 1.378 28.0 1.102 17.0000 .6693 M16 63.0000 2.480 40.0000 1.574 22.0000 .8661 14.0000 .5512 3 7200 Y 0.30
                          List price:
                          C$410.29 /each
                          Your price:
                          2003540 12396933400 12396933400 W   40.0000 1.574 28.0 1.102 17.0000 .6693 M16 63.0000 2.480 40.0000 1.574 22.0000 .8661 14.0000 .5512 4 7000 Y 0.30
                            List price:
                            C$451.23 /each
                            Your price:
                            List price:
                            Discount: %
                            Your price:
                            Replacement This item is no longer available
                            Replacement Product Please contact customer service for assistance

                            ORIGINAL PRODUCT

                            M680-16 • Weldon® End Mills • Metric M680-16 • Weldon® End Mills • Metric

                            Weldon® End Mills • Metric
                            (9 Products)
                            • Shank - Cylindrical Weldon 2 FlatShank - Cylindrical Weldon 2 Flat
                            • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
                            • Slotting: Square EndSlotting: Square End
                            • Face MillingFace Milling
                            View Products
                            SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Max RPM Coolant Supply Weight Kilograms
                            2002366 12396920400 12396920400 W   16.0000 .6300 16.0 .6299 75.0000 2.953 27.0000 1.063 9.0000 .3540 2 28000 N 0.10
                              List price:
                              C$248.99 /each
                              Your price:
                              2002369 12396920600 12396920600 W   20.0000 .7870 20.0 .7874 82.0000 3.228 32.0000 1.260 9.0000 .3540 2 27000 Y 0.30
                                List price:
                                C$307.52 /each
                                Your price:
                                2003474 12396920800 12396920800 W   25.0000 .9840 25.0 .9843 96.0000 3.780 40.0000 1.575 9.0000 .3540 3 24000 Y 0.30
                                  This item is no longer available
                                  Please contact customer service for assistance
                                  Your price:
                                  2119939 15396321200 15396321200     38.1000 1.500 31.75 1.25 111.7600 4.400 53.8230 2.119 8.8900 .3500 5 19000 Y 0.70
                                    This item is no longer available
                                    Please contact customer service for assistance
                                    Your price:
                                    2119944 15396323000 15396323000     31.7500 1.250 31.75 1.25 101.6000 4.000 43.6630 1.719 13.9700 .5500 3 15500 Y 0.50
                                      This item is no longer available
                                      Please contact customer service for assistance
                                      Your price:
                                      2119946 15396323400 15396323400     38.1000 1.500 31.75 1.25 111.7600 4.400 69.0630 2.719 13.9700 .5500 4 14000 Y 0.70
                                        This item is no longer available
                                        Please contact customer service for assistance
                                        Your price:
                                        List price:
                                        Discount: %
                                        Your price:
                                        Replacement This item is no longer available
                                        Replacement Product Please contact customer service for assistance

                                        ORIGINAL PRODUCT

                                        M680-16 • XPHT-L M680-16 • XPHT-L

                                        Inserts
                                        (5 Products)
                                        View Products
                                        SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Cutting Edges per Insert [W] Insert Width [W] Insert Width [S] Insert Thickness [S] Insert Thickness [BS] Corner Facet Length [BS] Corner Facet Length [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM]
                                        5427397 XPHT160412L XPHT333L WK15CM   2 9.5250 .3750 4.7600 .1875 1.4000 .0551 1.2000 .0468 0.1600 .0063
                                          List price:
                                          C$25.61 /each
                                          Your price:
                                          2216256 XPHT160412L XPHT333L TN7525   2 9.5250 .3750 4.7600 .1875 1.4000 .0551 1.2000 .0468    
                                            This item is no longer available
                                            Please contact customer service for assistance
                                            Your price:
                                            2030353 XPHT160412L XPHT333L TN7535   2 9.5250 .3750 4.7600 .1875 1.4000 .0551 1.2000 .0468 0.1600 .0063
                                              List price:
                                              C$25.61 /each
                                              Your price:
                                              6843993 XPHT160412L XPHT333L WP35CM   2 9.5250 .3750 4.7600 .1875 1.4000 .0551 1.2000 .0468 0.1600 .0063
                                                List price:
                                                C$29.08 /each
                                                Your price:
                                                2111035 XPHT160412L XPHT333L TN5515   2 9.5250 .3750 4.7600 .1875 1.4000 .0551 1.2000 .0468