successfully added to cart
View Cart

Notifications

Mark all as read

VariDrillTM

A reliable solid carbide drill to exceed expectations in multi-material drilling operations. ​

This solid carbide drill offers dependable tool life in all materials due to less chipping on the cutting edge. This drill geometry enables chips to roll smoothly and evacuate easily resulting in noticeably less friction, heat, jamming, and scratching.

All Star Logo

VariDrill is an All-Star tool. 

Order tools with same-day shipping with All-Star! Learn more.

    

Product Features

  • 140 degree cone point design to increase tool life in all materials
  • WU25PD drilling grade for high wear resistance and longer tool life

 

 

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (1280)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1280)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1280)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (1280)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (1280)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (1280)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (1280)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (1280)
  • M Stainless Steel (1280)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (1280)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (1280)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (1280)
  • K Cast Iron (1280)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (1280)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (1280)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (1280)
  • N Non-Ferrous Materials (1280)
    • N1
      Wrought Aluminum
      (1280)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (1280)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (1280)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (1280)
  • S High-Temp Alloys (1280)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (1280)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (1280)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (1280)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (1280)
Select All Star
  • CN (199)
  • DE (795)
  • GB (414)
  • IN (123)
  • SG (833)
  • US (488)
Applications
Applications
  • Drilling Drilling (1280)
  • Stacked Plates Drilling Stacked Plates Drilling (1238)
Cutting Diameter
Cutting Diameter
  • 0.0591 in (5)
  • 0.063 in (5)
  • 0.0669 in (5)
  • 0.0709 in (5)
  • 0.0748 in (5)
  • 0.0781 in (5)
  • 0.0787 in (5)
  • 0.0827 in (5)
  • 0.0866 in (5)
  • 0.0906 in (5)
  • 0.0938 in (5)
  • 0.0945 in (5)
  • 0.096 in (5)
  • 0.098 in (5)
  • 0.0984 in (5)
  • 0.1015 in (5)
  • 0.1024 in (5)
  • 0.104 in (5)
  • 0.1063 in (5)
  • 0.1065 in (5)
  • 0.1094 in (5)
  • 0.1102 in (5)
  • 0.111 in (5)
  • 0.113 in (5)
  • 0.1142 in (5)
  • 0.116 in (5)
  • 0.1181 in (5)
  • 0.12 in (5)
  • 0.122 in (5)
  • 0.125 in (5)
  • 0.126 in (5)
  • 0.1285 in (5)
  • 0.1299 in (5)
  • 0.1339 in (5)
  • 0.136 in (5)
  • 0.1378 in (5)
  • 0.1406 in (5)
  • 0.1417 in (5)
  • 0.144 in (5)
  • 0.1457 in (5)
  • 0.147 in (5)
  • 0.1496 in (5)
  • 0.1535 in (5)
  • 0.1563 in (5)
  • 0.1575 in (5)
  • 0.159 in (5)
  • 0.161 in (5)
  • 0.1614 in (5)
  • 0.1654 in (5)
  • 0.166 in (5)
  • 0.1693 in (5)
  • 0.1719 in (5)
  • 0.1732 in (5)
  • 0.1772 in (5)
  • 0.1811 in (5)
  • 0.182 in (5)
  • 0.185 in (5)
  • 0.1875 in (5)
  • 0.189 in (5)
  • 0.191 in (5)
  • 0.1929 in (5)
  • 0.1969 in (5)
  • 0.2008 in (5)
  • 0.201 in (5)
  • 0.2031 in (5)
  • 0.2047 in (5)
  • 0.2087 in (5)
  • 0.2126 in (5)
  • 0.213 in (5)
  • 0.2165 in (5)
  • 0.2188 in (5)
  • 0.2205 in (5)
  • 0.2211 in (5)
  • 0.2244 in (5)
  • 0.2283 in (5)
  • 0.2323 in (5)
  • 0.2344 in (5)
  • 0.2362 in (5)
  • 0.2402 in (5)
  • 0.2441 in (5)
  • 0.248 in (5)
  • 0.25 in (5)
  • 0.252 in (5)
  • 0.2559 in (5)
  • 0.257 in (5)
  • 0.2598 in (5)
  • 0.261 in (5)
  • 0.2638 in (5)
  • 0.2656 in (5)
  • 0.2677 in (5)
  • 0.2717 in (5)
  • 0.2756 in (5)
  • 0.2795 in (5)
  • 0.2813 in (5)
  • 0.2835 in (5)
  • 0.2874 in (5)
  • 0.2913 in (5)
  • 0.2953 in (5)
  • 0.2969 in (5)
  • 0.2992 in (5)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 1.5 mm (5)
  • 1.6 mm (5)
  • 1.7 mm (5)
  • 1.8 mm (5)
  • 1.9 mm (5)
  • 1.984 mm (5)
  • 2.0 mm (5)
  • 2.1 mm (5)
  • 2.2 mm (5)
  • 2.3 mm (5)
  • 2.383 mm (5)
  • 2.4 mm (5)
  • 2.439 mm (5)
  • 2.489 mm (5)
  • 2.5 mm (5)
  • 2.578 mm (5)
  • 2.6 mm (5)
  • 2.642 mm (5)
  • 2.7 mm (5)
  • 2.705 mm (5)
  • 2.779 mm (5)
  • 2.8 mm (5)
  • 2.82 mm (5)
  • 2.87 mm (5)
  • 2.9 mm (5)
  • 2.947 mm (5)
  • 3.0 mm (5)
  • 3.048 mm (5)
  • 3.1 mm (5)
  • 3.175 mm (5)
  • 3.2 mm (5)
  • 3.264 mm (5)
  • 3.3 mm (5)
  • 3.4 mm (5)
  • 3.455 mm (5)
  • 3.5 mm (5)
  • 3.571 mm (5)
  • 3.6 mm (5)
  • 3.658 mm (5)
  • 3.7 mm (5)
  • 3.734 mm (5)
  • 3.8 mm (5)
  • 3.9 mm (5)
  • 3.97 mm (5)
  • 4.0 mm (5)
  • 4.039 mm (5)
  • 4.09 mm (5)
  • 4.1 mm (5)
  • 4.2 mm (5)
  • 4.217 mm (5)
  • 4.3 mm (5)
  • 4.3656 mm (5)
  • 4.4 mm (5)
  • 4.5 mm (5)
  • 4.6 mm (5)
  • 4.623 mm (5)
  • 4.7 mm (5)
  • 4.763 mm (5)
  • 4.8 mm (5)
  • 4.852 mm (5)
  • 4.9 mm (5)
  • 5.0 mm (5)
  • 5.1 mm (5)
  • 5.106 mm (5)
  • 5.1594 mm (5)
  • 5.2 mm (5)
  • 5.3 mm (5)
  • 5.4 mm (5)
  • 5.41 mm (5)
  • 5.5 mm (5)
  • 5.558 mm (5)
  • 5.6 mm (5)
  • 5.616 mm (5)
  • 5.7 mm (5)
  • 5.8 mm (5)
  • 5.9 mm (5)
  • 5.954 mm (5)
  • 6.0 mm (5)
  • 6.1 mm (5)
  • 6.2 mm (5)
  • 6.3 mm (5)
  • 6.35 mm (5)
  • 6.4 mm (5)
  • 6.5 mm (5)
  • 6.528 mm (5)
  • 6.6 mm (5)
  • 6.63 mm (5)
  • 6.7 mm (5)
  • 6.746 mm (5)
  • 6.8 mm (5)
  • 6.9 mm (5)
  • 7.0 mm (5)
  • 7.1 mm (5)
  • 7.145 mm (5)
  • 7.2 mm (5)
  • 7.3 mm (5)
  • 7.4 mm (5)
  • 7.5 mm (5)
  • 7.5406 mm (5)
  • 7.6 mm (5)
Cutting Diameter Min to Cutting Diameter Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 5.0 mm (13)
  • 6.0 mm (23)
  • 9.0 mm (10)
  • 10.0 mm (21)
  • 12.0 mm (32)
  • 14.0 mm (40)
  • 15.0 mm (5)
  • 17.0 mm (64)
  • 20.0 mm (42)
  • 22.0 mm (5)
  • 23.0 mm (30)
  • 24.0 mm (28)
  • 25.0 mm (16)
  • 29.0 mm (58)
  • 33.0 mm (15)
  • 35.0 mm (96)
  • 40.0 mm (50)
  • 41.0 mm (16)
  • 43.0 mm (99)
  • 45.0 mm (50)
  • 48.0 mm (21)
  • 49.0 mm (54)
  • 51.0 mm (46)
  • 55.0 mm (46)
  • 56.0 mm (50)
  • 57.0 mm (14)
  • 60.0 mm (46)
  • 63.0 mm (50)
  • 64.0 mm (13)
  • 68.0 mm (1)
  • 71.0 mm (43)
  • 77.0 mm (39)
  • 80.0 mm (26)
  • 96.0 mm (25)
  • 112.0 mm (23)
  • 128.0 mm (25)
  • 144.0 mm (22)
  • 160.0 mm (23)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 0.1969 in (13)
  • 0.2362 in (23)
  • 0.3543 in (10)
  • 0.3937 in (21)
  • 0.4724 in (32)
  • 0.55 in (16)
  • 0.5512 in (24)
  • 0.5906 in (5)
  • 0.6693 in (37)
  • 0.67 in (27)
  • 0.7874 in (6)
  • 0.79 in (36)
  • 0.8661 in (5)
  • 0.9055 in (21)
  • 0.91 in (9)
  • 0.94 in (25)
  • 0.9449 in (3)
  • 0.9843 in (16)
  • 1.14 in (35)
  • 1.1417 in (23)
  • 1.2992 in (6)
  • 1.3 in (9)
  • 1.378 in (54)
  • 1.38 in (42)
  • 1.57 in (14)
  • 1.5748 in (36)
  • 1.61 in (7)
  • 1.6142 in (9)
  • 1.69 in (51)
  • 1.6929 in (48)
  • 1.77 in (34)
  • 1.7717 in (16)
  • 1.8898 in (14)
  • 1.89 in (7)
  • 1.9291 in (50)
  • 1.93 in (4)
  • 2.0079 in (17)
  • 2.01 in (29)
  • 2.1654 in (21)
  • 2.17 in (25)
  • 2.2 in (14)
  • 2.2047 in (36)
  • 2.24 in (5)
  • 2.2441 in (9)
  • 2.36 in (4)
  • 2.3622 in (42)
  • 2.48 in (26)
  • 2.4803 in (24)
  • 2.5197 in (13)
  • 2.6772 in (1)
  • 2.7953 in (10)
  • 2.8 in (33)
  • 3.03 in (22)
  • 3.0315 in (17)
  • 3.1496 in (26)
  • 3.7795 in (25)
  • 4.4094 in (23)
  • 5.0394 in (25)
  • 5.6693 in (22)
  • 6.2992 in (23)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Reach
Reach
  • 0.2756 in (13)
  • 0.3543 in (23)
  • 0.4724 in (21)
  • 0.5118 in (10)
  • 0.6693 in (32)
  • 0.7087 in (15)
  • 0.7874 in (14)
  • 0.79 in (16)
  • 0.8661 in (32)
  • 0.94 in (27)
  • 0.9449 in (5)
  • 1.0236 in (5)
  • 1.1 in (45)
  • 1.1024 in (27)
  • 1.1811 in (16)
  • 1.3386 in (3)
  • 1.34 in (25)
  • 1.4173 in (20)
  • 1.42 in (12)
  • 1.57 in (9)
  • 1.5748 in (6)
  • 1.61 in (23)
  • 1.6142 in (3)
  • 1.73 in (26)
  • 1.7323 in (16)
  • 1.85 in (16)
  • 1.8504 in (38)
  • 1.9291 in (9)
  • 1.93 in (7)
  • 2.0866 in (24)
  • 2.09 in (30)
  • 2.1654 in (36)
  • 2.17 in (14)
  • 2.2 in (7)
  • 2.2047 in (14)
  • 2.36 in (21)
  • 2.3622 in (24)
  • 2.4 in (4)
  • 2.4016 in (50)
  • 2.5591 in (16)
  • 2.56 in (34)
  • 2.6378 in (9)
  • 2.64 in (5)
  • 2.7953 in (36)
  • 2.8 in (14)
  • 2.87 in (29)
  • 2.874 in (17)
  • 2.9134 in (13)
  • 3.03 in (4)
  • 3.0315 in (42)
  • 3.11 in (25)
  • 3.1102 in (21)
  • 3.1496 in (1)
  • 3.2677 in (24)
  • 3.27 in (26)
  • 3.622 in (26)
  • 3.66 in (33)
  • 3.6614 in (10)
  • 3.9764 in (17)
  • 3.98 in (22)
  • 4.3307 in (25)
  • 5.0394 in (23)
  • 5.748 in (25)
  • 6.4173 in (22)
  • 7.126 in (23)
Reach Min to Reach Max
Reach
Reach
  • 7.0 mm (13)
  • 9.0 mm (23)
  • 12.0 mm (21)
  • 13.0 mm (10)
  • 17.0 mm (32)
  • 18.0 mm (15)
  • 20.0 mm (30)
  • 22.0 mm (32)
  • 24.0 mm (32)
  • 26.0 mm (5)
  • 28.0 mm (72)
  • 30.0 mm (16)
  • 34.0 mm (28)
  • 36.0 mm (32)
  • 40.0 mm (15)
  • 41.0 mm (26)
  • 44.0 mm (42)
  • 47.0 mm (54)
  • 49.0 mm (16)
  • 53.0 mm (54)
  • 55.0 mm (50)
  • 56.0 mm (21)
  • 60.0 mm (45)
  • 61.0 mm (54)
  • 65.0 mm (50)
  • 67.0 mm (14)
  • 71.0 mm (50)
  • 73.0 mm (46)
  • 74.0 mm (13)
  • 77.0 mm (46)
  • 79.0 mm (46)
  • 80.0 mm (1)
  • 83.0 mm (50)
  • 92.0 mm (26)
  • 93.0 mm (43)
  • 101.0 mm (39)
  • 110.0 mm (25)
  • 128.0 mm (23)
  • 146.0 mm (25)
  • 163.0 mm (22)
  • 181.0 mm (23)
Reach Min to Reach Max
Internal Coolant Capability
Internal Coolant Capability
Back-End
Back-End Diameter
Back-End Diameter
  • 4.0 mm (167)
  • 6.0 mm (260)
  • 8.0 mm (135)
  • 10.0 mm (135)
  • 12.0 mm (125)
  • 14.0 mm (114)
  • 16.0 mm (125)
  • 18.0 mm (111)
  • 20.0 mm (108)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.1575 in (167)
  • 0.2362 in (260)
  • 0.315 in (135)
  • 0.3937 in (135)
  • 0.4724 in (125)
  • 0.5512 in (114)
  • 0.6299 in (125)
  • 0.7087 in (111)
  • 0.7874 in (108)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

Solid Carbide Drills • VariDrill™ Series

VDS201A • VDS401A • 3 x D
(514 Products)
  • DrillingDrilling
  • Drilling Depth: 3xDrilling Depth: 3x
  • Shank - Cylindrical  Plain ≤h6Shank - Cylindrical Plain ≤h6
  • Helix Angle: 30°Helix Angle: 30°
  • 3856338563
  • 3855038550
  • Drilling - Through CoolantDrilling - Through Coolant
  • Flood Coolant: DrillingFlood Coolant: Drilling
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Adapter Style Machine Side [D1] Drill Diameter M [D1] Drill Diameter M [L4] Maximum Drilling Depth [L4] Maximum Drilling Depth [L3] Flute Length [L3] Flute Length [L5] Drill Point Length [L5] Drill Point Length [L] Overall Length [L] Overall Length [LS] Shank Length [LS] Shank Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter
4144458 VDS201A13000 VDS201A13000 WU25PD   Straight-Cylindrical 13.0000 .5118 43.0000 1.692 60.0000 2.362 2.2400 .0882 107.0000 4.212 45.0 1.771 14.0 .5512
    List price:
    $106.66 /each.
    Your price::
    Qty
    4144460 VDS201A13100 VDS201A13100 WU25PD Straight-Cylindrical 13.1000 .5157 43.0000 1.690 60.0000 2.360 2.2500 .0890 107.0000 4.210 45.0 1.77 14.0 .5512  
      List price:
      $110.33 /each.
      Your price::
      Qty
      4144461 VDS201A13200 VDS201A13200 WU25PD Straight-Cylindrical 13.2000 .5197 43.0000 1.692 60.0000 2.362 2.2700 .0894 107.0000 4.212 45.0 1.771 14.0 .5512  
        List price:
        $110.33 /each.
        Your price::
        Qty
        4144464 VDS201A13500 VDS201A13500 WU25PD Straight-Cylindrical 13.5000 .5315 43.0000 1.690 60.0000 2.360 2.3300 .0920 107.0000 4.210 45.0 1.77 14.0 .5512  
          List price:
          $110.33 /each.
          Your price::
          Qty
          4144465 VDS201A13600 VDS201A13600 WU25PD Straight-Cylindrical 13.6000 .5354 43.0000 1.692 60.0000 2.362 2.3400 .0921 107.0000 4.212 45.0 1.771 14.0 .5512  
            List price:
            $110.33 /each.
            Your price::
            Qty
            4144466 VDS201A13700 VDS201A13700 WU25PD Straight-Cylindrical 13.7000 .5394 43.0000 1.690 60.0000 2.360 2.3600 .0930 107.0000 4.210 45.0 1.77 14.0 .5512  
              List price:
              $110.33 /each.
              Your price::
              Qty
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Qty

              Sold in pkg. of

              ORIGINAL PRODUCT

              Solid Carbide Drills • VariDrill™ Series

              VDS403A • 8 x D
              (261 Products)
              • DrillingDrilling
              • Drilling Depth: 8xDrilling Depth: 8x
              • Shank - Cylindrical  Plain ≤h6Shank - Cylindrical Plain ≤h6
              • Helix Angle: 30°Helix Angle: 30°
              • 3855038550
              • Drilling - Through CoolantDrilling - Through Coolant
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D1] Drill Diameter M [D1] Drill Diameter M [L4] Maximum Drilling Depth [L4] Maximum Drilling Depth [L3] Flute Length [L3] Flute Length [L5] Drill Point Length [L5] Drill Point Length [L] Overall Length [L] Overall Length [LS] Shank Length [LS] Shank Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter
              4143700 VDS403A01500 VDS403A01500 WU25PD   1.5000 .0591 15.0000 .5906 18.0000 .7087 0.2290 .0090 58.0000 2.283 28.0 1.102 4.0 .1575
                List price:
                $109.80 /each.
                Your price::
                Qty
                4143701 VDS403A01600 VDS403A01600 WU25PD 1.6000 .0630 15.0000 .5906 18.0000 .7087 0.2460 .0097 58.0000 2.283 28.0 1.102 4.0 .1575  
                  List price:
                  $109.80 /each.
                  Your price::
                  Qty
                  4143702 VDS403A01700 VDS403A01700 WU25PD 1.7000 .0669 15.0000 .5906 18.0000 .7087 0.2600 .0102 58.0000 2.283 28.0 1.102 4.0 .1575  
                    List price:
                    $109.80 /each.
                    Your price::
                    Qty
                    4143723 VDS403A01800 VDS403A01800 WU25PD 1.8000 .0709 15.0000 .5906 18.0000 .7087 0.2800 .0110 58.0000 2.283 28.0 1.102 4.0 .1575  
                      List price:
                      $109.80 /each.
                      Your price::
                      Qty
                      4143724 VDS403A01900 VDS403A01900 WU25PD 1.9000 .0748 15.0000 .5906 18.0000 .7087 0.2970 .0117 58.0000 2.283 28.0 1.102 4.0 .1575  
                        List price:
                        $109.80 /each.
                        Your price::
                        Qty
                        4143726 VDS403A02000 VDS403A02000 WU25PD 2.0000 .0787 22.0000 .8661 26.0000 1.023 0.3130 .0123 66.0000 2.598 28.0 1.102 4.0 .1575  
                          List price:
                          $109.80 /each.
                          Your price::
                          Qty
                          List price:
                          Discount: %
                          Your price::
                          Replacement This item is not available
                          Replacement Product This item may be available through a distributor
                          Qty

                          Sold in pkg. of

                          ORIGINAL PRODUCT

                          Solid Carbide Drills • VariDrill™ Series

                          VDS202A • VDS402A • 5 x D
                          (505 Products)
                          • DrillingDrilling
                          • Drilling Depth: 5xDrilling Depth: 5x
                          • Shank - Cylindrical  Plain ≤h6Shank - Cylindrical Plain ≤h6
                          • Helix Angle: 30°Helix Angle: 30°
                          • 3856338563
                          • 3855038550
                          • Drilling - Through CoolantDrilling - Through Coolant
                          • Flood Coolant: DrillingFlood Coolant: Drilling
                          View Products
                          SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Adapter Style Machine Side [D1] Drill Diameter M [D1] Drill Diameter M [L4] Maximum Drilling Depth [L4] Maximum Drilling Depth [L3] Flute Length [L3] Flute Length [L5] Drill Point Length [L5] Drill Point Length [L] Overall Length [L] Overall Length [LS] Shank Length [LS] Shank Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter
                          4148317 VDS202A12304 VDS202A12304 WU25PD   Straight-Cylindrical 12.3040 .4844 60.0000 2.360 77.0000 3.030 2.1100 .0830 124.0000 4.880 45.0 1.77 14.0 .5512
                            List price:
                            $133.34 /each.
                            Your price::
                            Qty
                            4148319 VDS202A12500 VDS202A12500 WU25PD Straight-Cylindrical 12.5000 .4921 60.0000 2.362 77.0000 3.031 2.1500 .0846 124.0000 4.881 45.0 1.771 14.0 .5512