successfully added to cart
View Cart

Notifications

Mark all as read

WGC – Grooving and Cut-Off Tools

WGC

Grooving:

  • First choice for external grooving applications in most workpiece materials 
  • Through coolant capability and efficient coolant delivery for enhanced productivity 
  • Groove width: 2-10mm (0.084"-0.399")
WGC

Cut-Off:

  • Specially-engineered chipbreakers for effective parting/cut-off and deep grooving 
  • Positive geometry for lower forces
  • Groove width: 1,4-8mm (0.055"-0.315")
WGC

Profiling:

  • Full radius chipbreaker for multi-directional turning to generate complex profiles 
  • Rigid design to ensure smooth surface finish 
  • 2-8mm (0.079"-0.315")

Advances Inch (2020)

View Digital Catalog

Advances Metric (2020)

View Digital Catalog

 

 

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (359)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (359)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (359)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (359)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (359)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (359)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (359)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (359)
  • M Stainless Steel (359)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (359)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (359)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (359)
  • K Cast Iron (351)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (351)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (351)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (351)
  • N Non-Ferrous Materials (351)
    • N1
      Wrought Aluminum
      (351)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (351)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (351)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (351)
    • N6
      Carbon, Graphite Composites, CFRP
      (351)
  • S High-Temp Alloys (359)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (359)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (359)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (359)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (359)
  • H Hardened Materials (123)
    • H1
      Hardened Materials 44-48 HRC
      (123)
    • H2
      Hardened Materials 48-55 HRC
      (123)
Select All Star
  • CN (38)
  • DE (54)
  • GB (11)
  • IN (2)
  • US (90)
Applications
Applications
  • Back Boring Back Boring (54)
  • Boring Boring (9)
  • Chamfer Turning Chamfer Turning (36)
  • Cut-Off Cut-Off (283)
  • Face Grooving Face Grooving (75)
  • Facing Facing (91)
  • Grooving Grooving (141)
  • ID Facing ID Facing (86)
  • ID Grooving ID Grooving (95)
  • Multiple Direction Cutting Multiple Direction Cutting (20)
  • Plunge Turning Plunge Turning (83)
  • Profiling Profiling (91)
  • TRN Boring TRN Boring (32)
  • Turning Turning (111)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (253)
  • Lightly Interrupted Cut (253)
  • Smooth Cut (253)
  • Varying Depth of Cut (253)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (205)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Boring Bar Shank (32)
  • Cutoff Support Blade A1-A3 (15)
  • Toolholder (180)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (315)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Corner configuration
Corner Radius
Corner Radius
  • 0.08 mm (26)
  • 0.102 mm (89)
  • 0.15 mm (46)
  • 0.2 mm (153)
  • 0.202 mm (37)
  • 0.203 mm (125)
  • 0.3 mm (61)
  • 0.318 mm (69)
  • 0.4 mm (175)
  • 0.78 mm (37)
  • 0.8 mm (130)
  • 1.0 mm (40)
  • 1.19 mm (33)
  • 1.2 mm (37)
  • 1.5 mm (39)
  • 1.59 mm (39)
  • 2.0 mm (37)
  • 2.38 mm (37)
  • 2.5 mm (26)
  • 3.0 mm (32)
  • 3.175 mm (32)
  • 3.96 mm (23)
  • 4.0 mm (23)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.004 in (89)
  • 0.0057 in (3)
  • 0.0059 in (40)
  • 0.006 in (5)
  • 0.0077 in (40)
  • 0.0078 in (40)
  • 0.0079 in (41)
  • 0.008 in (159)
  • 0.009 in (40)
  • 0.012 in (61)
  • 0.0125 in (69)
  • 0.0156 in (37)
  • 0.0157 in (101)
  • 0.0158 in (37)
  • 0.016 in (141)
  • 0.031 in (122)
  • 0.0314 in (37)
  • 0.0315 in (119)
  • 0.032 in (96)
  • 0.039 in (40)
  • 0.0463 in (23)
  • 0.047 in (38)
  • 0.0472 in (9)
  • 0.059 in (39)
  • 0.062 in (39)
  • 0.0787 in (40)
  • 0.079 in (37)
  • 0.094 in (37)
  • 0.098 in (26)
  • 0.118 in (32)
  • 0.125 in (32)
  • 0.156 in (23)
  • 0.1575 in (23)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (202)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (202)
Corner Chamfer Min to Corner Chamfer Max
Application
Drilling Condition
Drilling Condition
  • Heavily Interrupted Cut (54)
  • Lightly Interrupted Cut (54)
  • Smooth Cut (54)
  • Varying Depth of Cut (54)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • WU10PT (123)
  • WU25PT (341)
  • WU35PT (85)
Hand Of Tool
Hand Of Tool
  • L (106)
  • N (15)
  • R (106)
Wiper Insert
Wiper Insert
  • N (315)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 2.25 in (12)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 57.15 mm (12)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 20.0 mm (4)
  • 32.0 mm (24)
  • 406.4 mm (12)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 0.787 in (4)
  • 1.26 in (24)
  • 16.0 in (12)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • E (195)
  • S (32)
Rake Angle Style
Rake Angle Style
  • NEGATIVE-ZERO (22)
  • NEUTRAL (ZERO) (10)
  • POSITIVE-ZERO (36)
Boring Bar Material
Boring Bar Material
  • S (32)
Front-End
Clamp Style
Clamp Style
  • C (12)
  • S (28)
  • Y (131)
Cutting Width
Cutting Width
  • 1.4 mm (8)
  • 1.404 mm (4)
  • 2.0 mm (50)
  • 2.125 mm (41)
  • 2.387 mm (43)
  • 2.388 mm (49)
  • 2.5 mm (40)
  • 2.51 mm (40)
  • 2.511 mm (40)
  • 3.0 mm (51)
  • 3.125 mm (42)
  • 3.175 mm (58)
  • 3.176 mm (41)
  • 3.301 mm (40)
  • 3.302 mm (40)
  • 4.0 mm (48)
  • 4.125 mm (40)
  • 4.75 mm (38)
  • 4.754 mm (37)
  • 4.761 mm (37)
  • 4.762 mm (40)
  • 4.763 mm (40)
  • 4.877 mm (38)
  • 4.878 mm (38)
  • 5.0 mm (31)
  • 5.125 mm (29)
  • 6.0 mm (36)
  • 6.125 mm (35)
  • 6.35 mm (35)
  • 6.477 mm (33)
  • 6.478 mm (33)
  • 7.125 mm (32)
  • 7.92 mm (23)
  • 7.925 mm (23)
  • 8.0 mm (25)
  • 8.051 mm (23)
  • 8.052 mm (23)
  • 8.125 mm (26)
  • 9.525 mm (9)
  • 9.651 mm (10)
  • 10.125 mm (10)
Cutting Width Min to Cutting Width Max
Cutting Width
Cutting Width
  • 0.055 in (10)
  • 0.0787 in (40)
  • 0.0788 in (40)
  • 0.079 in (48)
  • 0.0837 in (41)
  • 0.094 in (53)
  • 0.0984 in (40)
  • 0.0988 in (40)
  • 0.099 in (40)
  • 0.118 in (46)
  • 0.1181 in (41)
  • 0.1182 in (40)
  • 0.123 in (42)
  • 0.125 in (61)
  • 0.13 in (42)
  • 0.157 in (41)
  • 0.1575 in (42)
  • 0.158 in (37)
  • 0.162 in (37)
  • 0.1624 in (39)
  • 0.187 in (38)
  • 0.1872 in (37)
  • 0.1875 in (45)
  • 0.192 in (39)
  • 0.1921 in (37)
  • 0.1968 in (28)
  • 0.1969 in (26)
  • 0.197 in (27)
  • 0.2018 in (29)
  • 0.236 in (32)
  • 0.2362 in (35)
  • 0.241 in (32)
  • 0.2411 in (34)
  • 0.25 in (35)
  • 0.255 in (35)
  • 0.281 in (32)
  • 0.312 in (24)
  • 0.315 in (25)
  • 0.317 in (24)
  • 0.3199 in (26)
  • 0.375 in (9)
  • 0.38 in (10)
  • 0.3986 in (10)
Cutting Width Min to Cutting Width Max
Insert Shape
Insert Shape
  • PRISMATIC (363)
Cartridge Size
Cartridge Size
  • 50 (24)
  • 65 (10)
Insert Size
Insert Size
  • 10 (8)
  • 2 (16)
  • 3 (16)
  • 4 (24)
  • 5 (16)
  • 6 (20)
  • 8 (16)
Maximum Cutting Depth
Maximum Cutting Depth
  • 10.0 mm (4)
  • 12.0 mm (10)
  • 14.0 mm (1)
  • 15.0 mm (1)
  • 16.0 mm (65)
  • 17.0 mm (1)
  • 19.05 mm (4)
  • 20.0 mm (1)
  • 22.0 mm (16)
  • 25.4 mm (8)
  • 26.0 mm (46)
  • 30.0 mm (1)
  • 32.0 mm (26)
  • 40.0 mm (14)
  • 50.0 mm (3)
  • 60.0 mm (3)
  • 120.0 mm (1)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.394 in (4)
  • 0.4724 in (10)
  • 0.5512 in (1)
  • 0.5906 in (1)
  • 0.6299 in (21)
  • 0.63 in (44)
  • 0.669 in (1)
  • 0.75 in (4)
  • 0.7875 in (1)
  • 0.866 in (8)
  • 0.8661 in (8)
  • 1.0 in (8)
  • 1.0236 in (23)
  • 1.024 in (23)
  • 1.1812 in (1)
  • 1.2598 in (16)
  • 1.26 in (10)
  • 1.5748 in (7)
  • 1.575 in (6)
  • 1.5752 in (1)
  • 1.9671 in (1)
  • 1.9686 in (1)
  • 1.969 in (1)
  • 2.3622 in (3)
  • 4.7244 in (1)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Gage Length
Gage Length
  • 69.7800 mm (2)
  • 82.4800 mm (2)
  • 83.9300 mm (1)
  • 95.3600 mm (3)
  • 101.7100 mm (1)
  • 107.8800 mm (1)
  • 138.1500 mm (2)
  • 138.7500 mm (2)
  • 139.2500 mm (2)
  • 139.9000 mm (6)
  • 140.4000 mm (8)
  • 140.5500 mm (2)
  • 150.0000 mm (2)
  • 151.4600 mm (3)
  • 152.4000 mm (4)
  • 158.1500 mm (2)
  • 158.7500 mm (2)
  • 159.2500 mm (2)
  • 165.9500 mm (2)
  • 170.0000 mm (2)
  • 171.4500 mm (3)
  • 177.8000 mm (2)
Gage Length
Gage Length
  • 2.7470 in (2)
  • 3.2470 in (2)
  • 3.3040 in (1)
  • 3.7540 in (3)
  • 4.0040 in (1)
  • 4.2470 in (1)
  • 5.4390 in (2)
  • 5.4626 in (2)
  • 5.4823 in (2)
  • 5.5000 in (12)
  • 5.5079 in (1)
  • 5.5276 in (2)
  • 5.5300 in (1)
  • 5.9055 in (2)
  • 5.9630 in (3)
  • 6.0000 in (4)
  • 6.2264 in (2)
  • 6.2500 in (2)
  • 6.2697 in (2)
  • 6.5000 in (2)
  • 6.6929 in (2)
  • 6.7500 in (3)
  • 7.0000 in (2)
Insert Geometry
Shape
Shape
  • PRISMATIC (158)
Insert Seat Size
Insert Seat Size
  • 10 (5)
  • 1B (8)
  • 2 (30)
  • 3 (44)
  • 4 (32)
  • 5 (10)
  • 6 (18)
  • 8 (11)
Cutting Tool Material
Cutting Tool Material
  • H W (359)
Back-End
Connection Type
Connection Type
  • BORING BAR (32)
  • CUTOFF BLADE (15)
  • SQUARE SHANK (180)
Back-End Diameter
Back-End Diameter
  • 1.0 in (1)
  • 1.25 in (1)
  • 1.5 in (1)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 25.4 mm (1)
  • 31.7 mm (1)
  • 38.1 mm (1)
Back-End Diameter Min to Back-End Diameter Max
other
Grade
Grade
  • W (7)
  • WU10PT (10)
  • WU25PT (140)
  • WU35PT (8)
Platform
Platform
  • WGC (441)
Tool Unit
Tool Unit
  • I (319)
  • M (348)
Drilling Condition Material
Drilling Condition Material
  • K-All (54)
  • M-All (54)
  • N-All (54)
  • P-All (54)
  • S-All (54)
Cutting Condition Material
Cutting Condition Material
  • K-All (253)
  • M-All (253)
  • N-All (253)
  • P-All (253)
  • S-All (253)
Devibrator Tool
Devibrator Tool
Insert Hand
Insert Hand
  • L (133)
  • N (306)
  • R (150)
Tuneable Tool
Tuneable Tool
Over All Length [L]
Over All Length [L]
  • 47.746 mm (5)
  • 47.75 mm (5)
  • 49.62 mm (4)
  • 51.746 mm (3)
  • 51.75 mm (1)
  • 57.746 mm (3)
  • 57.75 mm (1)
  • 58.42 mm (3)
  • 58.425 mm (1)
  • 59.62 mm (4)
  • 61.746 mm (1)
  • 61.75 mm (1)
  • 64.77 mm (8)
  • 65.62 mm (2)
  • 67.746 mm (3)
  • 67.75 mm (1)
  • 86.0 mm (1)
  • 90.25 mm (3)
  • 100.0 mm (1)
  • 108.46 mm (2)
  • 110.0 mm (2)
  • 110.25 mm (4)
  • 110.251 mm (1)
  • 114.3 mm (26)
  • 121.16 mm (2)
  • 125.0 mm (27)
  • 131.83 mm (1)
  • 138.75 mm (2)
  • 139.9 mm (6)
  • 143.26 mm (3)
  • 146.56 mm (1)
  • 149.61 mm (1)
  • 150.0 mm (26)
  • 150.25 mm (8)
  • 151.4 mm (6)
  • 151.76 mm (3)
  • 152.4 mm (48)
  • 158.75 mm (2)
  • 160.0 mm (2)
  • 170.0 mm (22)
  • 170.25 mm (2)
  • 177.8 mm (10)
  • 200.0 mm (6)
  • 260.0 mm (1)
Over All Length [L] Min to Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 1.8798 in (5)
  • 1.8799 in (5)
  • 1.9535 in (3)
  • 1.9536 in (1)
  • 2.0372 in (3)
  • 2.0374 in (1)
  • 2.2735 in (4)
  • 2.3 in (3)
  • 2.3002 in (1)
  • 2.3472 in (3)
  • 2.3473 in (1)
  • 2.4309 in (1)
  • 2.4311 in (1)
  • 2.55 in (8)
  • 2.5835 in (2)
  • 2.6672 in (3)
  • 2.6673 in (1)
  • 3.3858 in (1)
  • 3.5532 in (1)
  • 3.5533 in (2)
  • 3.937 in (1)
  • 4.27 in (2)
  • 4.3307 in (2)
  • 4.3404 in (1)
  • 4.3406 in (2)
  • 4.3407 in (2)
  • 4.5 in (26)
  • 4.77 in (2)
  • 4.921 in (18)
  • 4.9213 in (9)
  • 5.19 in (1)
  • 5.4626 in (2)
  • 5.5 in (5)
  • 5.5079 in (1)
  • 5.64 in (3)
  • 5.77 in (1)
  • 5.89 in (1)
  • 5.9055 in (21)
  • 5.906 in (5)
  • 5.9152 in (1)
  • 5.9153 in (2)
  • 5.9154 in (3)
  • 5.9155 in (2)
  • 5.9606 in (6)
  • 5.975 in (3)
  • 6.0 in (48)
  • 6.25 in (2)
  • 6.2992 in (2)
  • 6.6929 in (20)
  • 6.693 in (2)
  • 6.7028 in (2)
  • 7.0 in (10)
  • 7.874 in (6)
  • 10.236 in (1)
Over All Length [L] Min to Over All Length [L] Max
Solid Indexable Tool
Solid Indexable Tool
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

Grooving and Cut-Off

WGCM-S-C • WGC Modular Straight Blade with Coolant
(34 Products)
  • Through Coolant: GroovingThrough Coolant: Grooving
  • TurningTurning
  • Cut-OffCut-Off
  • O.D. Deep GroovingO.D. Deep Grooving
  • ProfilingProfiling
  • FacingFacing
  • ChamferingChamfering
  • GroovingGrooving
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Insert Size [CD] Cutting Depth [CD] Cutting Depth [FS] Secondary F Dimension [FS] Secondary F Dimension Cartridge Size
6498861 WGCM50R0322MC WGCM50R0322MC   3 22.0000 .8661 10.4250 .4104 50
    List price:
    $157.37 /each.
    Your price::
    Qty
    6498899 WGCM65L0816MC WGCM65L0816MC   8 16.0000 .6299 9.0000 .3543 65
      List price:
      $160.42 /each.
      Your price::
      Qty
      6498898 WGCM65L0632MC WGCM65L0632MC   6 32.0000 1.259 9.8800 .3889 65
        List price:
        $160.42 /each.
        Your price::
        Qty
        6498897 WGCM65L0626MC WGCM65L0626MC   6 26.0000 1.023 9.8800 .3889 65
          List price:
          $160.42 /each.
          Your price::
          Qty
          6498900 WGCM65L0826MC WGCM65L0826MC   8 26.0000 1.023 9.0000 .3543 65
            List price:
            $160.42 /each.
            Your price::
            Qty
            6498862 WGCM50R0412MC WGCM50R0412MC   4 12.0000 .4724 9.9250 .3907 50
              List price:
              $157.37 /each.
              Your price::
              Qty
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Qty

              Sold in pkg. of

              ORIGINAL PRODUCT

              Grooving and Cut-Off

              WGCRM-B • WGC Ranger™ Single-Ended Modular Blades
              (6 Products)
              • FacingFacing
              • Face GroovingFace Grooving
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Insert Size [W] Groove Width [W] Groove Width [CD] Cutting Depth [CD] Cutting Depth [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [DMAX] Maximum Bore Diameter [DMAX] Maximum Bore Diameter [FS] Secondary F Dimension [FS] Secondary F Dimension [L] Overall Length [L] Overall Length
              6740411 WGCMRAR0319B317 WGCMRAR0319B317   3 3.1750 .1250 19.0500 .7500 57.1500 2.250 406.4000 16.000 -1.5490 -0.061 58.4200 2.300
                List price:
                $221.79 /each.
                Your price::
                Qty
                6740389 WGCMRAL0425B476 WGCMRAL0425B476   4 4.7620 .1875 25.4000 1.000 57.1500 2.250 406.4000 16.000 -2.3390 -0.092 64.7700 2.550
                  List price:
                  $221.79 /each.
                  Your price::
                  Qty
                  6740412 WGCMRAR0425B476 WGCMRAR0425B476   4 4.7620 .1875 25.4000 1.000 57.1500 2.250 406.4000 16.000 -2.3390 -0.092 64.7700 2.550
                    List price:
                    $221.79 /each.
                    Your price::
                    Qty
                    6740388 WGCMRAL0319B317 WGCMRAL0319B317   3 3.1750 .1250 19.0500 .7500 57.1500 2.250 406.4000 16.000 -1.5490 -0.061 58.4250 2.300