TopThread™

Select Filters
Filters
    View filters in
    Metric
    Inch
    Key Filters
    Workpiece Material
    Workpiece Material
    • P Steel (208)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(208)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(208)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(208)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(208)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(208)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(208)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(208)
    • M Stainless Steel (208)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(208)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(208)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(208)
    • K Cast Iron (208)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(208)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(208)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(208)
    • N Non-Ferrous Materials (208)
      • N1
        Wrought Aluminum (208)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(208)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(208)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (208)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (208)
      • N6
        Carbon, Graphite Composites, CFRP (208)
      • N7
        MMC's (208)
    • S High-Temp Alloys (208)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(208)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(208)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(208)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(208)
    • H Hardened Materials (157)
      • H1
        Hardened Materials 44-48 HRC(157)
      • H2
        Hardened Materials 48-55 HRC(157)
      • H3
        Hardened Materials 56-60 HRC(148)
      • H4
        Hardened Materials >60 HRC(148)
    Select All Star
    • DE (5)
    • IN (3)
    • US (83)
    Applications
    Applications
    • Chamfer TurningChamfer Turning (6)
    • Cut-OffCut-Off (6)
    • Deep GroovingDeep Grooving (6)
    • Face GroovingFace Grooving (73)
    • FacingFacing (12)
    • GroovingGrooving (102)
    • ID GroovingID Grooving (59)
    • ID Thread TurningID Thread Turning (128)
    • Multiple Direction CuttingMultiple Direction Cutting (6)
    • OD Thread TurningOD Thread Turning (167)
    • Plunge TurningPlunge Turning (6)
    • ProfilingProfiling (8)
    • TRN BoringTRN Boring (6)
    • ThreadingThreading (94)
    • TurningTurning (12)
    Type of Thread
    Type of Thread
    • 60 (158)
    • ACME (89)
    • API (16)
    • API RD (56)
    • BSW (35)
    • BUTTRESS (53)
    • M (20)
    • NPT (12)
    • STUB ACME (56)
    • UN (148)
    • UNJ (35)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (130)
    • Lightly Interrupted Cut (130)
    • Smooth Cut (135)
    • Varying Depth of Cut (130)
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (140)
    Tool Cutting Edge Angle MintoTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • Boring Bar Shank (40)
    • KM (28)
    • Toolholder (48)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 1.0 (137)
    • 2.0 (201)
    • 4.0 (2)
    Cutting Edges Per Insert MintoCutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.575 in(8)
    • 1.85 in(4)
    • 2.5 in(1)
    • 2.757 in(6)
    • 3.15 in(3)
    • 3.5 in(1)
    • 3.543 in(4)
    • 3.938 in(5)
    • 4.0 in(2)
    • 4.331 in(4)
    • 4.5 in(9)
    • 4.921 in(8)
    • 5.0 in(9)
    • 5.906 in(19)
    • 6.0 in(22)
    • 6.694 in(2)
    • 7.087 in(2)
    • 7.875 in(4)
    • 8.0 in(3)
    • 9.843 in(2)
    • 10.0 in(5)
    • 11.811 in(3)
    • 12.0 in(4)
    • 13.781 in(1)
    • 14.0 in(6)
    • 16.0 in(3)
    Over All Length [L] MintoOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 40.0 mm(8)
    • 47.0 mm(4)
    • 63.5 mm(1)
    • 70.0 mm(6)
    • 80.0 mm(3)
    • 88.9 mm(1)
    • 90.0 mm(4)
    • 100.0 mm(5)
    • 101.601 mm(2)
    • 110.0 mm(4)
    • 114.301 mm(9)
    • 125.0 mm(8)
    • 127.0 mm(9)
    • 150.0 mm(19)
    • 152.4 mm(22)
    • 170.0 mm(2)
    • 180.0 mm(2)
    • 200.0 mm(4)
    • 203.201 mm(3)
    • 250.0 mm(2)
    • 254.0 mm(5)
    • 300.0 mm(3)
    • 304.8 mm(4)
    • 350.0 mm(1)
    • 355.6 mm(6)
    • 406.401 mm(3)
    Over All Length [L] MintoOver All Length [L] Max
    Corner configuration
    Corner Radius
    Corner Radius
    • 0.002 in(12)
    • 0.003 in(114)
    • 0.004 in(100)
    • 0.005 in(14)
    • 0.006 in(26)
    • 0.007 in(123)
    • 0.008 in(137)
    • 0.01 in(72)
    • 0.011 in(12)
    • 0.012 in(34)
    • 0.014 in(78)
    • 0.016 in(55)
    • 0.019 in(16)
    • 0.02 in(67)
    • 0.023 in(75)
    • 0.03 in(55)
    • 0.031 in(108)
    • 0.035 in(16)
    • 0.039 in(108)
    • 0.047 in(108)
    • 0.049 in(108)
    • 0.06 in(108)
    • 0.062 in(53)
    • 0.063 in(91)
    • 0.069 in(108)
    • 0.078 in(53)
    • 0.079 in(75)
    • 0.089 in(75)
    • 0.095 in(75)
    • 0.098 in(22)
    • 0.125 in(22)
    Corner Radius MintoCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.05 mm(12)
    • 0.076 mm(114)
    • 0.1 mm(100)
    • 0.125 mm(14)
    • 0.151 mm(26)
    • 0.176 mm(123)
    • 0.2 mm(137)
    • 0.225 mm(35)
    • 0.25 mm(70)
    • 0.275 mm(12)
    • 0.301 mm(34)
    • 0.325 mm(76)
    • 0.351 mm(59)
    • 0.4 mm(55)
    • 0.45 mm(16)
    • 0.476 mm(6)
    • 0.5 mm(67)
    • 0.576 mm(75)
    • 0.75 mm(55)
    • 0.775 mm(108)
    • 0.9 mm(16)
    • 1.0 mm(108)
    • 1.201 mm(108)
    • 1.25 mm(108)
    • 1.5 mm(108)
    • 1.576 mm(53)
    • 1.6 mm(91)
    • 1.75 mm(108)
    • 1.975 mm(53)
    • 2.0 mm(75)
    • 2.25 mm(75)
    • 2.401 mm(75)
    • 2.5 mm(22)
    • 3.176 mm(22)
    Corner Radius MintoCorner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(71)
    Corner Chamfer MintoCorner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(71)
    Corner Chamfer MintoCorner Chamfer Max
    Application
    Minimum Depth of Cut
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • K2885 (28)
    • K313 (32)
    • K420 (32)
    • K4H (20)
    • K68 (32)
    • KB1345 (16)
    • KB1630 (16)
    • KB5625 (12)
    • KBH20 (6)
    • KC250 (28)
    • KC5010 (32)
    • KC5025 (32)
    • KC5410 (32)
    • KC710 (32)
    • KC720 (32)
    • KC722 (32)
    • KC730 (32)
    • KC732 (12)
    • KC810 (32)
    • KC850 (32)
    • KC910 (20)
    • KC9110 (32)
    • KC9120 (12)
    • KC9320 (32)
    • KC935 (32)
    • KC950 (32)
    • KCK20 (24)
    • KCK20B (32)
    • KCP10B (32)
    • KCP25B (32)
    • KCP25C (32)
    • KCU10 (32)
    • KCU10B (32)
    • KCU25 (32)
    • KCU25B (32)
    • KD050 (6)
    • KD081 (12)
    • KD100 (14)
    • KD120 (16)
    • KD1425 (12)
    • KT175 (28)
    • KT315 (32)
    • KU10T (32)
    • KU25T (32)
    • KU30T (32)
    • KY3000 (16)
    • THM (108)
    • TN10P (88)
    • TN6010 (157)
    • TN6025 (188)
    • TN7110 (130)
    • WU10HT (27)
    • WU10PT (46)
    • WU25PT (26)
    Hand Of Tool
    Hand Of Tool
    • L (46)
    • R (70)
    Wiper Insert
    Wiper Insert
    • N (210)
    F Dimension
    F Dimension
    • 6.551 mm(2)
    • 7.0 mm(2)
    • 10.3 mm(1)
    • 11.0 mm(10)
    • 11.101 mm(2)
    • 12.0 mm(1)
    • 12.701 mm(5)
    • 13.0 mm(4)
    • 14.275 mm(3)
    • 15.875 mm(3)
    • 16.0 mm(2)
    • 17.0 mm(12)
    • 17.475 mm(4)
    • 19.05 mm(1)
    • 20.0 mm(1)
    • 22.0 mm(6)
    • 22.225 mm(2)
    • 25.0 mm(3)
    • 25.401 mm(8)
    • 27.0 mm(11)
    • 28.0 mm(1)
    • 31.75 mm(16)
    • 32.0 mm(7)
    • 34.926 mm(2)
    • 35.0 mm(1)
    • 38.1 mm(4)
    • 40.0 mm(2)
    F Dimension MintoF Dimension Max
    F Dimension
    F Dimension
    • 0.258 in(2)
    • 0.276 in(2)
    • 0.406 in(1)
    • 0.433 in(10)
    • 0.437 in(2)
    • 0.473 in(1)
    • 0.5 in(5)
    • 0.512 in(4)
    • 0.562 in(3)
    • 0.625 in(3)
    • 0.63 in(2)
    • 0.669 in(12)
    • 0.689 in(4)
    • 0.75 in(1)
    • 0.787 in(1)
    • 0.866 in(6)
    • 0.875 in(2)
    • 0.984 in(3)
    • 1.0 in(8)
    • 1.063 in(11)
    • 1.102 in(1)
    • 1.25 in(16)
    • 1.26 in(7)
    • 1.375 in(2)
    • 1.379 in(1)
    • 1.5 in(4)
    • 1.575 in(2)
    F Dimension MintoF Dimension Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.0 mm(52)
    • 11.175 mm(2)
    • 11.5 mm(2)
    • 18.5 mm(4)
    • 18.55 mm(2)
    • 20.0 mm(4)
    • 20.326 mm(1)
    • 22.0 mm(2)
    • 25.0 mm(2)
    • 25.401 mm(2)
    • 26.0 mm(2)
    • 28.576 mm(2)
    • 32.0 mm(4)
    • 34.0 mm(8)
    • 34.926 mm(4)
    • 40.0 mm(4)
    • 41.301 mm(25)
    • 44.0 mm(2)
    • 44.45 mm(2)
    • 47.6 mm(25)
    • 50.801 mm(2)
    • 54.0 mm(9)
    • 55.875 mm(1)
    • 56.625 mm(2)
    • 57.2 mm(12)
    • 60.325 mm(1)
    • 63.5 mm(7)
    • 69.851 mm(2)
    • 70.0 mm(1)
    • 76.2 mm(1)
    • 88.9 mm(28)
    • 139.701 mm(25)
    • 174.601 mm(25)
    • 209.601 mm(12)
    • 222.3 mm(12)
    Minimum Axial Groove Diameter MintoMinimum Axial Groove Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.0 in(52)
    • 0.44 in(2)
    • 0.453 in(2)
    • 0.728 in(4)
    • 0.73 in(2)
    • 0.787 in(4)
    • 0.8 in(1)
    • 0.866 in(2)
    • 0.984 in(2)
    • 1.0 in(2)
    • 1.024 in(2)
    • 1.125 in(2)
    • 1.26 in(4)
    • 1.339 in(8)
    • 1.375 in(4)
    • 1.575 in(4)
    • 1.627 in(25)
    • 1.732 in(2)
    • 1.75 in(2)
    • 1.874 in(25)
    • 2.0 in(2)
    • 2.126 in(9)
    • 2.2 in(1)
    • 2.229 in(2)
    • 2.253 in(12)
    • 2.375 in(1)
    • 2.5 in(7)
    • 2.75 in(2)
    • 2.757 in(1)
    • 3.0 in(1)
    • 3.5 in(28)
    • 5.5 in(25)
    • 6.875 in(25)
    • 8.252 in(12)
    • 8.752 in(12)
    Minimum Axial Groove Diameter MintoMinimum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 393.661 in(135)
    Maximum Axial Groove Diameter MintoMaximum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 9999.0 mm(135)
    Maximum Axial Groove Diameter MintoMaximum Axial Groove Diameter Max
    Countersunk Angle
    Countersunk Angle
    • 14.5 (14)
    • 27.0 (2)
    • 27.5 (2)
    • 30.0 (50)
    • 33.0 (2)
    • 45.0 (1)
    Countersunk Angle MintoCountersunk Angle Max
    Cutting Direction
    Cutting Direction
    • E (54)
    • S (62)
    Rake Angle Style
    Rake Angle Style
    • NEGATIVE-ZERO (1)
    • NEUTRAL (ZERO) (115)
    Maximum Bore Depth
    Maximum Bore Depth
    • 1.0 in(7)
    • 1.23 in(1)
    • 1.232 in(1)
    • 1.29 in(1)
    • 1.5 in(1)
    • 1.575 in(6)
    • 1.655 in(2)
    • 1.891 in(2)
    • 2.0 in(15)
    • 2.169 in(4)
    • 2.209 in(2)
    • 2.5 in(3)
    • 2.52 in(2)
    • 2.757 in(2)
    • 2.955 in(4)
    • 2.993 in(2)
    • 3.0 in(2)
    • 3.15 in(4)
    • 3.781 in(2)
    • 3.938 in(4)
    • 4.0 in(4)
    • 5.0 in(2)
    • 5.039 in(2)
    • 6.0 in(2)
    • 6.299 in(3)
    • 7.0 in(2)
    • 7.875 in(1)
    • 8.0 in(3)
    Maximum Bore Depth MintoMaximum Bore Depth Max
    Maximum Bore Depth
    Maximum Bore Depth
    • 25.401 mm(7)
    • 31.25 mm(1)
    • 31.3 mm(1)
    • 32.775 mm(1)
    • 38.1 mm(1)
    • 40.0 mm(6)
    • 42.026 mm(2)
    • 48.0 mm(2)
    • 50.801 mm(15)
    • 55.1 mm(4)
    • 56.1 mm(2)
    • 63.5 mm(3)
    • 64.0 mm(2)
    • 70.025 mm(2)
    • 75.05 mm(4)
    • 76.025 mm(2)
    • 76.2 mm(2)
    • 80.0 mm(4)
    • 96.025 mm(2)
    • 100.0 mm(4)
    • 101.601 mm(4)
    • 127.0 mm(2)
    • 128.0 mm(2)
    • 152.4 mm(2)
    • 160.0 mm(3)
    • 177.8 mm(2)
    • 200.0 mm(1)
    • 203.201 mm(3)
    Maximum Bore Depth MintoMaximum Bore Depth Max
    Boring Bar Material
    Boring Bar Material
    • C (2)
    • S (60)
    Front-End
    Clamp Style
    Clamp Style
    • N (140)
    Cutting Width
    Cutting Width
    • 0.02 in(55)
    • 0.031 in(55)
    • 0.035 in(16)
    • 0.039 in(108)
    • 0.041 in(39)
    • 0.047 in(113)
    • 0.055 in(55)
    • 0.058 in(55)
    • 0.06 in(108)
    • 0.062 in(113)
    • 0.067 in(55)
    • 0.069 in(108)
    • 0.073 in(53)
    • 0.077 in(55)
    • 0.078 in(53)
    • 0.079 in(108)
    • 0.088 in(108)
    • 0.089 in(81)
    • 0.094 in(27)
    • 0.095 in(113)
    • 0.097 in(12)
    • 0.098 in(108)
    • 0.105 in(12)
    • 0.108 in(108)
    • 0.11 in(12)
    • 0.119 in(130)
    • 0.122 in(12)
    • 0.125 in(130)
    • 0.126 in(73)
    • 0.128 in(108)
    • 0.129 in(16)
    • 0.131 in(6)
    • 0.138 in(130)
    • 0.143 in(12)
    • 0.147 in(31)
    • 0.15 in(8)
    • 0.151 in(8)
    • 0.152 in(55)
    • 0.156 in(53)
    • 0.157 in(75)
    • 0.167 in(57)
    • 0.169 in(12)
    • 0.177 in(75)
    • 0.178 in(12)
    • 0.185 in(14)
    • 0.188 in(66)
    • 0.189 in(75)
    • 0.192 in(27)
    • 0.193 in(6)
    • 0.195 in(33)
    • 0.196 in(53)
    • 0.197 in(22)
    • 0.202 in(4)
    • 0.213 in(4)
    • 0.217 in(22)
    • 0.219 in(4)
    • 0.237 in(22)
    • 0.25 in(22)
    • 0.256 in(4)
    Cutting Width MintoCutting Width Max
    Cutting Width
    Cutting Width
    • 0.5 mm(55)
    • 0.775 mm(55)
    • 0.8 mm(55)
    • 0.9 mm(16)
    • 1.0 mm(108)
    • 1.05 mm(39)
    • 1.201 mm(113)
    • 1.401 mm(55)
    • 1.475 mm(55)
    • 1.5 mm(108)
    • 1.576 mm(113)
    • 1.701 mm(55)
    • 1.75 mm(108)
    • 1.826 mm(53)
    • 1.951 mm(55)
    • 1.975 mm(53)
    • 2.0 mm(108)
    • 2.2 mm(108)
    • 2.225 mm(49)
    • 2.25 mm(81)
    • 2.375 mm(27)
    • 2.401 mm(113)
    • 2.475 mm(12)
    • 2.5 mm(108)
    • 2.676 mm(12)
    • 2.75 mm(108)
    • 2.801 mm(12)
    • 3.0 mm(130)
    • 3.1 mm(12)
    • 3.176 mm(130)
    • 3.2 mm(73)
    • 3.25 mm(108)
    • 3.276 mm(16)
    • 3.325 mm(6)
    • 3.5 mm(130)
    • 3.6 mm(12)
    • 3.725 mm(31)
    • 3.801 mm(8)
    • 3.825 mm(8)
    • 3.85 mm(55)
    • 3.95 mm(53)
    • 3.975 mm(27)
    • 4.0 mm(75)
    • 4.25 mm(57)
    • 4.3 mm(12)
    • 4.5 mm(75)
    • 4.525 mm(12)
    • 4.7 mm(14)
    • 4.775 mm(66)
    • 4.801 mm(75)
    • 4.875 mm(27)
    • 4.9 mm(6)
    • 4.95 mm(33)
    • 4.976 mm(53)
    • 5.0 mm(22)
    • 5.125 mm(4)
    • 5.4 mm(4)
    • 5.5 mm(22)
    • 5.575 mm(4)
    • 6.0 mm(22)
    • 6.351 mm(22)
    • 6.5 mm(4)
    Cutting Width MintoCutting Width Max
    Insert Size
    Insert Size
    • 1 (6)
    • 2 (57)
    • 3 (55)
    • 4 (19)
    • 6 (2)
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.067 in(1)
    • 0.138 in(35)
    • 0.21 in(36)
    • 0.225 in(1)
    • 0.24 in(1)
    • 0.294 in(15)
    • 0.334 in(2)
    Maximum Cutting Depth MintoMaximum Cutting Depth Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 1.701 mm(1)
    • 3.5 mm(35)
    • 5.325 mm(36)
    • 5.726 mm(1)
    • 6.101 mm(1)
    • 7.476 mm(15)
    • 8.475 mm(2)
    Maximum Cutting Depth MintoMaximum Cutting Depth Max
    Thread TPI
    Thread TPI
    • 2.0 (2)
    • 3.0 (1)
    • 4.0 (4)
    • 6.0 (3)
    • 8.0 (6)
    • 10.0 (1)
    • 11.0 (1)
    • 12.0 (4)
    • 14.0 (2)
    • 16.0 (2)
    • 20.0 (2)
    • 24.0 (2)
    Thread TPI MintoThread TPI Max
    Thread Pitch
    Thread Pitch
    • 2.0 mm(2)
    • 6.25 mm(1)
    Thread Pitch MintoThread Pitch Max
    Thread Pitch
    Thread Pitch
    • 0.079 in(2)
    • 0.246 in(1)
    Thread Pitch MintoThread Pitch Max
    Insert Geometry
    Shape
    Shape
    • TN-TOP NOTCH (71)
    Insert IC Size
    Insert IC Size
    • 4.75 mm(1)
    Insert IC Size MintoInsert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.187 in(1)
    Insert IC Size MintoInsert IC Size Max
    Insert Seat Size
    Insert Seat Size
    • 1 (2)
    • 2 (16)
    • 3 (42)
    • 4 (7)
    • 4U (1)
    • 6 (3)
    Cutting Tool Material
    Cutting Tool Material
    • B H (16)
    • B L (12)
    • C N (16)
    • D P (14)
    • H T (32)
    • H W (210)
    Back-End
    Connection Type
    Connection Type
    • BORING BAR (40)
    • SQUARE SHANK (48)
    • TAPER SHANK (28)
    System Size
    System Size
    • KM40TS (28)
    Back-End Diameter
    Back-End Diameter
    • 9.525 mm(1)
    • 10.0 mm(1)
    • 12.0 mm(3)
    • 12.701 mm(3)
    • 15.875 mm(3)
    • 16.0 mm(2)
    • 19.05 mm(2)
    • 20.0 mm(2)
    • 25.0 mm(4)
    • 25.401 mm(4)
    • 31.75 mm(2)
    • 32.0 mm(2)
    • 38.1 mm(2)
    • 40.0 mm(35)
    • 44.45 mm(2)
    • 50.0 mm(1)
    • 50.801 mm(3)
    Back-End Diameter MintoBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.375 in(1)
    • 0.394 in(1)
    • 0.473 in(3)
    • 0.5 in(3)
    • 0.625 in(3)
    • 0.63 in(2)
    • 0.75 in(2)
    • 0.787 in(2)
    • 0.984 in(4)
    • 1.0 in(4)
    • 1.25 in(2)
    • 1.26 in(2)
    • 1.5 in(2)
    • 1.575 in(35)
    • 1.75 in(2)
    • 1.969 in(1)
    • 2.0 in(3)
    Back-End Diameter MintoBack-End Diameter Max
    Shank Height
    Shank Height
    • 0.375 in(1)
    • 0.473 in(2)
    • 0.5 in(4)
    • 0.625 in(3)
    • 0.63 in(2)
    • 0.75 in(6)
    • 0.787 in(4)
    • 0.984 in(7)
    • 1.0 in(12)
    • 1.25 in(5)
    • 1.26 in(2)
    Shank Height MintoShank Height Max
    Shank Height
    Shank Height
    • 9.525 mm(1)