Back to Solution
Editing Solution
Adding Solution
Solution Name: {{SolutionName}}
M690 • SDMX-MM • SD1506..
Inserts • SDMX-MM
Workpiece Materials
P
Steel
M
Stainless Steel
K
Cast Iron
S
High-Temp Alloys
Filters and Columns
Filters
Filters
Filters
View filters in
Metric
Inch
Workpiece Material
Workpiece Material
-
P Steel (1)
-
P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1)
-
P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1)
-
P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(1)
-
P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(1)
-
P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(1)
-
P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(1)
-
P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(1)
-
-
M Stainless Steel (1)
-
M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(1)
-
M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(1)
-
M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(1)
-
-
K Cast Iron (1)
-
K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(1)
-
K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(1)
-
K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(1)
-
-
S High-Temp Alloys (1)
-
S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(1)
-
S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(1)
-
S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(1)
-
S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(1)
-
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying
1- 1
of 1 results
Metric
Inch
Show
Metric
Inch
| SAP Material Number | ISO Catalog Number | ANSI Catalog Number | Grade | First Choice | Cutting Edges per Insert | [D] Insert IC Size | [D] Insert IC Size | [L10] Insert Cutting Edge Length | [L10] Insert Cutting Edge Length | [S] Insert Thickness | [S] Insert Thickness | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3949807 | SDMX150612RMM | SDMX543RMM | TN6540 | 4 | 15.8800 | .6250 | 15.8800 | .6250 | 6.3500 | .2500 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
C$29.16
/each
Your price:
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
List price:
Discount: %
Replacement
This item is no longer available
Replacement Product Please contact customer service for assistance
Replacement Product Please contact customer service for assistance
Qty
Sold in pkg. of
Grades
-
TN5515
Coated carbide grade TN5515 has an MT-CVD-TiN-TiCN-Al203 coating. Engineered for a
balanced toughness and wear ratio. Ideal for light to medium machining of all cast irons.
K Cast Iron -
TN6540
Coated carbide grade TN6540 has a PVD-TiAlN multilayer and is excellent for medium and heavy
machining applications. It is ideal for use in all steels and nodular cast irons.
P SteelS High-Temp AlloysK Cast IronM Stainless Steel -
TN7525
MT-CVD/CVD — TiN-TiCN-Al2O3-TiN coated carbide. Light and medium machining for steels and nodular cast irons.
P SteelM Stainless Steel -
TN7535
MT-CVD/CVD — TiN-TiCN-Al2O3 coated carbide. Medium and heavy machining for steels and nodular cast iron.
P SteelK Cast IronM Stainless Steel
Insert Selection Guide
| Material Group | Light Machining | General Purpose | Heavy Machining | |||
| Geometry | Grade | Geometry | Grade | Geometry | Grade | |
| P1–P2 | .E..ML | TN6540 | .S..MM | TN6540 | .S..MH | TN6540 |
| P3–P4 | .E..ML | TN6540 | .S..MM | TN6540 | .S..MH | TN6540 |
| P5–P6 | .E..ML | TN6540 | .S..MM | TN6540 | .S..MH | TN6540 |
| M1–M2 | .E..ML | TN6540 | .S..MM | TN6540 | .S..MH | TN6540 |
| M3 | .E..ML | WS40PM | .S..MM | WS40PM | .S..MH | WP35CM |
| K1–K2 | .E..ML | WK15CM | .E..ML | WK15CM | .S..MH | WK15CM |
| K3 | .E..ML | WK15CM | .S..MM | TN6525 | .S..MH | TN6525 |
| N1–N2 | .ALP | THM-U | .E..ML | THM-U | .S..ML | THM-U |
| N3 | .ALP | THM-U | .E..ML | THM-U | .S..ML | THM-U |
| S1–S2 | .E..ML | TN6540 | .S..MM | TN6540 | .S..MM | TN6540 |
| S3 | .E..ML | TN6540 | .S..MM | WS30PM | .S..MM | TN6540 |
| S4 | .E..ML | TN6540 | .S..MM | WS30PM | .S..MM | TN6540 |
| H1 | .S..MM | WS30PM | .S..MM | WS30PM | .S..MM | WS30PM |
Insert Selection Guide
| Material Group | Light Machining | General Purpose | Heavy Machining | |||
| Geometry | Grade | Geometry | Grade | Geometry | Grade | |
| P1–P2 | .E..ML | TN6540 | .S..MM | TN6540 | .S..MH | TN6540 |
| P3–P4 | .E..ML | TN6540 | .S..MM | TN6540 | .S..MH | TN6540 |
| P5–P6 | .E..ML | TN6540 | .S..MM | TN6540 | .S..MH | TN6540 |
| M1–M2 | .E..ML | TN6540 | .S..MM | TN6540 | .S..MH | TN6540 |
| M3 | .E..ML | TN6540 | .S..MM | WP35CM | .S..MH | WP35CM |
| K1–K2 | .E..ML | WK15CM | .E..ML | WK15CM | .S..MH | WK15CM |
| K3 | .E..ML | WK15CM | .S..MM | WK15CM | .S..MH | WK15CM |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | .E..ML | TN6540 | .S..MM | TN6540 | .S..MM | TN6540 |
| S3 | .E..ML | TN6540 | .S..MM | TN6540 | .S..MM | TN6540 |
| S4 | .E..ML | TN6540 | .S..MM | TN6540 | .S..MM | TN6540 |
| H1 | .S..MM | TN6540 | .S..MM | TN6540 | .S..MM | TN6540 |
Recommended Starting Feeds [mm]
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40 100% | ||||||||||||
| .F..ALP | 0,12 | 0,23 | 0,46 | 0,08 | 0,17 | 0,33 | 0,06 | 0,13 | 0,25 | 0,06 | 0,11 | 0,22 | 0,05 | 0,10 | 0,20 | .F..ALP |
| .E..ML | 0,12 | 0,35 | 0,58 | 0,08 | 0,25 | 0,42 | 0,06 | 0,19 | 0,31 | 0,06 | 0,17 | 0,27 | 0,05 | 0,15 | 0,25 | .E..ML |
| .S..MM | 0,12 | 0,42 | 0,70 | 0,08 | 0,30 | 0,50 | 0,06 | 0,23 | 0,38 | 0,06 | 0,20 | 0,33 | 0,05 | 0,18 | 0,30 | .S..MM |
| .S..MH | 0,23 | 0,54 | 0,85 | 0,17 | 0,39 | 0,61 | 0,13 | 0,29 | 0,46 | 0,11 | 0,25 | 0,40 | 0,10 | 0,23 | 0,36 | .S..MH |
| Light Machining | General Purpose | Heavy Machining |
Recommended Starting Feeds [mm]
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40 100% | ||||||||||||
| .F..ALP | 0,12 | 0,23 | 0,46 | 0,08 | 0,17 | 0,33 | 0,06 | 0,13 | 0,25 | 0,06 | 0,11 | 0,22 | 0,05 | 0,10 | 0,20 | .F..ALP |
| .E..ML | 0,12 | 0,35 | 0,58 | 0,08 | 0,25 | 0,42 | 0,06 | 0,19 | 0,31 | 0,06 | 0,17 | 0,27 | 0,05 | 0,15 | 0,25 | .E..ML |
| .S..MM | 0,12 | 0,42 | 0,70 | 0,08 | 0,30 | 0,50 | 0,06 | 0,23 | 0,38 | 0,06 | 0,20 | 0,33 | 0,05 | 0,18 | 0,30 | .S..MM |
| .S..MH | 0,23 | 0,54 | 0,85 | 0,17 | 0,39 | 0,61 | 0,13 | 0,29 | 0,46 | 0,11 | 0,25 | 0,40 | 0,10 | 0,23 | 0,36 | .S..MH |
| Light Machining | General Purpose | Heavy Machining |
Recommended Starting Feeds [IPT]
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40 100% | ||||||||||||
| .F..ALP | .005 | .009 | .019 | .003 | .007 | .013 | .003 | .005 | .010 | .002 | .004 | .009 | .002 | .004 | .008 | .F..ALP |
| .E..ML | .005 | .014 | .022 | .003 | .010 | .016 | .003 | .007 | .012 | .002 | .006 | .010 | .002 | .006 | .010 | .E..ML |
| .S..MM | .005 | .016 | .027 | .003 | .012 | .020 | .003 | .009 | .015 | .002 | .008 | .013 | .002 | .007 | .012 | .S..MM |
| .S..MH | .009 | .021 | .033 | .007 | .015 | .024 | .005 | .011 | .018 | .004 | .010 | .016 | .004 | .009 | .014 | .S..MH |
| Light Machining | General Purpose | Heavy Machining |
Recommended Starting Feeds [IPT]
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40 100% | ||||||||||||
| .E..ML | .007 | .019 | .032 | .005 | .014 | .023 | .004 | .010 | .017 | .003 | .009 | .015 | .003 | .008 | .014 | .E..ML |
| .S..MM | .008 | .021 | .035 | .006 | .015 | .025 | .004 | .011 | .019 | .004 | .010 | .016 | .003 | .009 | .015 | .S..MM |
| .S..MH | .009 | .023 | .037 | .007 | .017 | .027 | .005 | .013 | .020 | .004 | .011 | .017 | .004 | .010 | .016 | .S..MH |
| Light Machining | General Purpose | Heavy Machining |
Recommended Starting Speeds [m/min]
| Material Group | TN6520 | TN6525 | TN6540 | WP35CM | |||||||||
| P | 0 | – | – | – | 340 | 265 | 235 | 300 | 235 | 200 | – | – | – |
| 1 | – | – | – | 340 | 265 | 235 | 300 | 235 | 200 | 455 | 395 | 370 | |
| 2 | – | – | – | 265 | 210 | 180 | 210 | 160 | 140 | 280 | 255 | 230 | |
| 3 | – | – | – | 235 | 180 | 155 | 180 | 140 | 115 | 255 | 230 | 205 | |
| 4 | – | – | – | 195 | 140 | 120 | 150 | 110 | 90 | 190 | 175 | 160 | |
| 5 | – | – | – | 260 | 195 | 165 | 200 | 150 | 125 | 260 | 230 | 210 | |
| 6 | – | – | – | 170 | 135 | 110 | 135 | 100 | 85 | 160 | 135 | 110 | |
| M | 1 | – | – | – | 160 | 100 | 65 | 110 | 65 | 50 | 205 | 185 | 155 |
| 2 | – | – | – | 100 | 65 | 40 | 65 | 40 | 35 | 185 | 160 | 140 | |
| 3 | – | – | – | 105 | 65 | 45 | 70 | 40 | 35 | 145 | 130 | 115 | |
| K | 1 | 375 | 265 | 190 | 230 | 205 | 185 | 185 | 170 | 150 | 295 | 265 | 240 |
| 2 | 325 | 210 | 160 | 180 | 160 | 150 | 145 | 130 | 115 | 235 | 210 | 190 | |
| 3 | 250 | 190 | 135 | 150 | 135 | 120 | 130 | 120 | 105 | 195 | 175 | 160 | |
| N | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | 40 | 30 | 25 | – | – | – |
| 2 | – | – | – | – | – | – | 20 | 15 | 10 | – | – | – | |
| 3 | – | – | – | – | – | – | 60 | 35 | 25 | – | – | – | |
| 4 | – | – | – | – | – | – | 50 | 25 | 20 | 66 | 50 | 33 | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |
| Material Group | WK15CM | WS30PM | WS40PM | THM-U | |||||||||
| P | 0 | – | – | – | – | – | – | – | – | – | – | – | – |
| 1 | – | – | – | – | – | – | 280 | 245 | 230 | – | – | – | |
| 2 | – | – | – | – | – | – | 235 | 205 | 170 | – | – | – | |
| 3 | – | – | – | – | – | – | 215 | 185 | 150 | – | – | – | |
| 4 | – | – | – | – | – | – | 195 | 160 | 130 | – | – | – | |
| 5 | – | – | – | – | – | – | 160 | 140 | 130 | – | – | – | |
| 6 | – | – | – | – | – | – | 140 | 110 | 85 | – | – | – | |
| M | 1 | – | – | – | 225 | 200 | 185 | 260 | 190 | 115 | – | – | – |
| 2 | – | – | – | 205 | 180 | 145 | 230 | 170 | 105 | – | – | – | |
| 3 | – | – | – | 155 | 135 | 105 | 190 | 140 | 80 | – | – | – | |
| K | 1 | 420 | 385 | 340 | – | – | – | – | – | – | 190 | 170 | 150 |
| 2 | 335 | 295 | 275 | – | – | – | – | – | – | – | – | – | |
| 3 | 280 | 250 | 230 | – | – | – | – | – | – | – | – | – | |
| N | 1 | – | – | – | – | – | – | 1075 | 945 | 945 | 2000 | 1200 | 1000 |
| 2 | – | – | – | – | – | – | 945 | 875 | 845 | 1365 | 815 | 665 | |
| 3 | – | – | – | – | – | – | 875 | 760 | 760 | 800 | 500 | 400 | |
| S | 1 | – | – | – | 45 | 40 | 30 | 62 | 45 | 27 | – | – | – |
| 2 | – | – | – | 45 | 40 | 30 | 55 | 40 | 26 | – | – | – | |
| 3 | – | – | – | 55 | 45 | 30 | 64 | 46 | 29 | – | – | – | |
| 4 | – | – | – | 85 | 60 | 40 | 90 | 66 | 42 | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |
Recommended Starting Speeds [m/min]
| Material Group | TN6520 | TN6525 | TN6540 | WP35CM | |||||||||
| P | 0 | – | – | – | 340 | 265 | 235 | 300 | 235 | 200 | – | – | – |
| 1 | – | – | – | 340 | 265 | 235 | 300 | 235 | 200 | 455 | 395 | 370 | |
| 2 | – | – | – | 265 | 210 | 180 | 210 | 160 | 140 | 280 | 255 | 230 | |
| 3 | – | – | – | 235 | 180 | 155 | 180 | 140 | 115 | 255 | 230 | 205 | |
| 4 | – | – | – | 195 | 140 | 120 | 150 | 110 | 90 | 190 | 175 | 160 | |
| 5 | – | – | – | 260 | 195 | 165 | 200 | 150 | 125 | 260 | 230 | 210 | |
| 6 | – | – | – | 170 | 135 | 110 | 135 | 100 | 85 | 160 | 135 | 110 | |
| M | 1 | – | – | – | 160 | 100 | 65 | 110 | 65 | 50 | 205 | 185 | 155 |
| 2 | – | – | – | 100 | 65 | 40 | 65 | 40 | 35 | 185 | 160 | 140 | |
| 3 | – | – | – | 105 | 65 | 45 | 70 | 40 | 35 | 145 | 130 | 115 | |
| K | 1 | 375 | 265 | 190 | 230 | 205 | 185 | 185 | 170 | 150 | 295 | 265 | 240 |
| 2 | 325 | 210 | 160 | 180 | 160 | 150 | 145 | 130 | 115 | 235 | 210 | 190 | |
| 3 | 250 | 190 | 135 | 150 | 135 | 120 | 130 | 120 | 105 | 195 | 175 | 160 | |
| N | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | 40 | 30 | 25 | – | – | – |
| 2 | – | – | – | – | – | – | 20 | 15 | 10 | – | – | – | |
| 3 | – | – | – | – | – | – | 60 | 35 | 25 | – | – | – | |
| 4 | – | – | – | – | – | – | 50 | 25 | 20 | 66 | 50 | 33 | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |
| Material Group | WK15CM | WS30PM | WS40PM | THM-U | |||||||||
| P | 0 | – | – | – | – | – | – | – | – | – | – | – | – |
| 1 | – | – | – | – | – | – | 280 | 245 | 230 | – | – | – | |
| 2 | – | – | – | – | – | – | 235 | 205 | 170 | – | – | – | |
| 3 | – | – | – | – | – | – | 215 | 185 | 150 | – | – | – | |
| 4 | – | – | – | – | – | – | 195 | 160 | 130 | – | – | – | |
| 5 | – | – | – | – | – | – | 160 | 140 | 130 | – | – | – | |
| 6 | – | – | – | – | – | – | 140 | 110 | 85 | – | – | – | |
| M | 1 | – | – | – | 225 | 200 | 185 | 260 | 190 | 115 | – | – | – |
| 2 | – | – | – | 205 | 180 | 145 | 230 | 170 | 105 | – | – | – | |
| 3 | – | – | – | 155 | 135 | 105 | 190 | 140 | 80 | – | – | – | |
| K | 1 | 420 | 385 | 340 | – | – | – | – | – | – | 190 | 170 | 150 |
| 2 | 335 | 295 | 275 | – | – | – | – | – | – | – | – | – | |
| 3 | 280 | 250 | 230 | – | – | – | – | – | – | – | – | – | |
| N | 1 | – | – | – | – | – | – | 1075 | 945 | 945 | 2000 | 1200 | 1000 |
| 2 | – | – | – | – | – | – | 945 | 875 | 845 | 1365 | 815 | 665 | |
| 3 | – | – | – | – | – | – | 875 | 760 | 760 | 800 | 500 | 400 | |
| S | 1 | – | – | – | 45 | 40 | 30 | 62 | 45 | 27 | – | – | – |
| 2 | – | – | – | 45 | 40 | 30 | 55 | 40 | 26 | – | – | – | |
| 3 | – | – | – | 55 | 45 | 30 | 64 | 46 | 29 | – | – | – | |
| 4 | – | – | – | 85 | 60 | 40 | 90 | 66 | 42 | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |