successfully added to cart
View Cart

Notifications

Mark all as read
TopThread™ and TopGroove™
TopThread™ and TopGroove™
TopThread™ and TopGroove™
TopThread™ and TopGroove™

NE 90° • Steel

TopThread™ and TopGroove™

Uses and application

  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum

Workpiece Materials

P Steel
M Stainless Steel
K Cast Iron
N Non-Ferrous
S High-Temp Alloys
H Hardened Materials
Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Applications
  • Grooving Grooving (16)
  • ID Grooving ID Grooving (15)
  • ID Thread Turning ID Thread Turning (16)
  • OD Thread Turning OD Thread Turning (16)
  • Threading Threading (16)
Workpiece Material
  • P Steel (16)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (16)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (16)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (16)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (16)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (16)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (16)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (16)
  • M Stainless Steel (16)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (16)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (16)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (16)
  • K Cast Iron (16)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (16)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (16)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (16)
  • N Non-Ferrous Materials (16)
    • N1
      Wrought Aluminum
      (16)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (16)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (16)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (16)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (16)
    • N6
      Carbon, Graphite Composites, CFRP
      (16)
    • N7
      MMC's
      (16)
  • S High-Temp Alloys (16)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (16)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (16)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (16)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (16)
  • H Hardened Materials (16)
    • H1
      Hardened Materials 44-48 HRC
      (16)
    • H2
      Hardened Materials 48-55 HRC
      (16)
    • H3
      Hardened Materials 56-60 HRC
      (10)
    • H4
      Hardened Materials >60 HRC
      (10)
Type of Thread
  • 60 (16)
  • ACME (10)
  • API (10)
  • API RD (6)
  • BSW (6)
  • BUTTRESS (16)
  • M (9)
  • NPT (6)
  • STUB ACME (6)
  • UN (16)
  • UNJ (6)
Cutting Condition
  • Heavily Interrupted Cut (16)
  • Lightly Interrupted Cut (16)
  • Smooth Cut (16)
  • Varying Depth of Cut (16)
Cutting Condition Material
  • H-All (16)
  • K-All (16)
  • M-All (16)
  • N-All (16)
  • P-All (16)
  • S-All (16)
Cutting Edges Per Insert
  • 1.0 (16)
  • 2.0 (16)
to
Internal Coolant Capability
Corner configuration
Corner Radius
  • 0.051 (2)
  • 0.057 (4)
  • 0.066 (6)
  • 0.076 (16)
  • 0.08 (12)
  • 0.089 (6)
  • 0.09 (6)
  • 0.094 (6)
  • 0.097 (4)
  • 0.1 (12)
  • 0.102 (12)
  • 0.116 (2)
  • 0.117 (4)
  • 0.127 (6)
  • 0.131 (6)
  • 0.132 (6)
  • 0.133 (6)
  • 0.15 (6)
  • 0.155 (6)
  • 0.157 (6)
  • 0.16 (4)
  • 0.165 (10)
  • 0.173 (6)
  • 0.178 (6)
  • 0.185 (3)
  • 0.19 (16)
  • 0.191 (16)
  • 0.198 (6)
  • 0.2 (6)
  • 0.202 (9)
  • 0.224 (6)
  • 0.235 (6)
  • 0.244 (2)
  • 0.25 (9)
  • 0.251 (6)
  • 0.254 (13)
  • 0.269 (6)
  • 0.282 (6)
  • 0.284 (6)
  • 0.3 (6)
  • 0.315 (8)
  • 0.318 (10)
  • 0.33 (6)
  • 0.34 (6)
  • 0.343 (4)
  • 0.356 (6)
  • 0.404 (6)
  • 0.406 (6)
  • 0.43 (6)
  • 0.445 (10)
  • 0.472 (2)
  • 0.49 (6)
  • 0.5 (6)
  • 0.508 (6)
  • 0.565 (2)
  • 0.57 (4)
  • 0.572 (10)
  • 0.575 (6)
  • 0.75 (6)
  • 0.787 (12)
  • 0.902 (10)
  • 1.0 (12)
  • 1.194 (12)
  • 1.195 (4)
  • 1.25 (12)
  • 1.5 (12)
  • 1.585 (6)
  • 1.588 (16)
  • 1.59 (2)
  • 1.75 (12)
  • 1.98 (4)
  • 1.981 (6)
  • 2.0 (10)
  • 2.25 (10)
  • 2.388 (10)
  • 2.39 (2)
  • 2.5 (4)
  • 3.175 (4)
  • 3.18 (2)
to
Corner Radius
  • 0.002 (2)
  • 0.0023 (4)
  • 0.0026 (6)
  • 0.003 (16)
  • 0.0031 (12)
  • 0.0035 (6)
  • 0.0037 (6)
  • 0.0038 (4)
  • 0.004 (12)
  • 0.0046 (6)
  • 0.005 (6)
  • 0.0052 (6)
  • 0.0053 (6)
  • 0.0059 (6)
  • 0.006 (6)
  • 0.0062 (6)
  • 0.0065 (10)
  • 0.0068 (6)
  • 0.007 (6)
  • 0.0075 (16)
  • 0.0078 (6)
  • 0.0079 (2)
  • 0.008 (9)
  • 0.0088 (6)
  • 0.0093 (6)
  • 0.0096 (2)
  • 0.0099 (6)
  • 0.01 (13)
  • 0.0106 (6)
  • 0.0111 (6)
  • 0.0112 (6)
  • 0.0118 (6)
  • 0.0124 (6)
  • 0.0125 (10)
  • 0.013 (6)
  • 0.0135 (10)
  • 0.014 (6)
  • 0.0159 (6)
  • 0.016 (6)
  • 0.017 (6)
  • 0.0175 (10)
  • 0.0186 (2)
  • 0.0193 (6)
  • 0.0197 (6)
  • 0.02 (6)
  • 0.0225 (10)
  • 0.0295 (6)
  • 0.031 (12)
  • 0.0355 (10)
  • 0.0394 (12)
  • 0.047 (12)
  • 0.0492 (12)
  • 0.0591 (12)
  • 0.0625 (16)
  • 0.0689 (12)
  • 0.078 (6)
  • 0.0787 (10)
  • 0.0886 (10)
  • 0.094 (10)
  • 0.0984 (4)
  • 0.106 (4)
  • 0.125 (4)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • K2885 (12)
  • K313 (16)
  • K420 (16)
  • K4H (9)
  • K68 (16)
  • KB1345 (10)
  • KB1630 (10)
  • KB5625 (6)
  • KC250 (12)
  • KC5010 (16)
  • KC5025 (16)
  • KC5410 (16)
  • KC710 (16)
  • KC720 (16)
  • KC722 (16)
  • KC730 (16)
  • KC732 (6)
  • KC810 (16)
  • KC850 (16)
  • KC910 (9)
  • KC9110 (16)
  • KC9120 (6)
  • KC9320 (16)
  • KC935 (16)
  • KC950 (16)
  • KCK20 (13)
  • KCK20B (16)
  • KCP10B (16)
  • KCP25B (16)
  • KCU10 (16)
  • KCU25 (16)
  • KD050 (2)
  • KD081 (6)
  • KD100 (8)
  • KD120 (10)
  • KD1425 (6)
  • KT175 (12)
  • KT315 (16)
  • KU10T (16)
  • KU25T (16)
  • KU30T (16)
  • KY3000 (10)
  • THM (12)
  • TN10P (11)
  • TN6010 (16)
  • TN6025 (16)
  • TN7110 (16)
  • WU10HT (2)
  • WU10PT (7)
  • WU25PT (4)
Hand Of Tool
  • L (7)
  • R (9)
Minimum Axial Groove Diameter
  • 0.7283 (2)
  • 0.7874 (2)
  • 0.9843 (2)
  • 1.3386 (2)
  • 1.5748 (3)
  • 1.9685 (4)
  • 1.969 (1)
to
Minimum Axial Groove Diameter
  • 18.5 (2)
  • 20.0 (2)
  • 25.0 (2)
  • 34.0 (2)
  • 40.0 (3)
  • 50.0 (5)
to
Maximum Bore Depth
  • 42.01 (2)
  • 56.16 (2)
  • 70.32 (2)
  • 70.47 (2)
  • 88.11 (2)
  • 91.26 (2)
  • 96.26 (1)
  • 120.34 (3)
to
Maximum Bore Depth
  • 1.6539 (2)
  • 2.211 (2)
  • 2.7685 (2)
  • 2.7744 (2)
  • 3.4689 (2)
  • 3.5929 (1)
  • 3.593 (1)
  • 3.7898 (1)
  • 4.7378 (3)
to
Boring Bar Material
  • S (15)
Front-End
Clamp Style
  • N (15)
Cutting Width
  • 0.5 (6)
  • 0.787 (6)
  • 0.8 (6)
  • 0.889 (6)
  • 0.991 (6)
  • 1.0 (12)
  • 1.041 (6)
  • 1.19 (10)
  • 1.194 (12)
  • 1.199 (3)
  • 1.2 (12)
  • 1.39 (6)
  • 1.397 (6)
  • 1.4 (6)
  • 1.473 (6)
  • 1.5 (12)
  • 1.56 (3)
  • 1.57 (9)
  • 1.575 (12)
  • 1.69 (6)
  • 1.7 (6)
  • 1.702 (6)
  • 1.75 (12)
  • 1.829 (6)
  • 1.94 (6)
  • 1.95 (6)
  • 1.956 (6)
  • 1.981 (6)
  • 2.0 (12)
  • 2.007 (6)
  • 2.2 (12)
  • 2.235 (12)
  • 2.24 (8)
  • 2.25 (10)
  • 2.388 (12)
  • 2.39 (4)
  • 2.464 (6)
  • 2.5 (12)
  • 2.667 (6)
  • 2.74 (6)
  • 2.743 (12)
  • 2.75 (12)
  • 2.794 (6)
  • 2.997 (12)
  • 3.0 (16)
  • 3.099 (6)
  • 3.17 (6)
  • 3.175 (16)
  • 3.18 (5)
  • 3.2 (16)
  • 3.245 (6)
  • 3.25 (6)
  • 3.251 (12)
  • 3.27 (6)
  • 3.32 (2)
  • 3.329 (2)
  • 3.5 (16)
  • 3.607 (6)
  • 3.73 (3)
  • 3.81 (6)
  • 3.84 (6)
  • 3.96 (6)
  • 3.962 (6)
  • 3.974 (2)
  • 3.988 (6)
  • 4.0 (10)
  • 4.24 (4)
  • 4.242 (10)
  • 4.25 (2)
  • 4.3 (6)
  • 4.5 (10)
  • 4.521 (6)
  • 4.699 (8)
  • 4.775 (10)
  • 4.78 (2)
  • 4.785 (2)
  • 4.788 (2)
  • 4.8 (6)
  • 4.801 (10)
  • 4.81 (6)
  • 4.88 (2)
  • 4.95 (6)
  • 5.0 (4)
  • 5.004 (4)
  • 5.131 (4)
  • 5.41 (4)
  • 5.5 (4)
  • 5.563 (4)
  • 6.0 (4)
  • 6.35 (4)
  • 6.36 (2)
  • 6.48 (4)
to
Cutting Width
  • 0.0197 (6)
  • 0.031 (6)
  • 0.0315 (6)
  • 0.035 (6)
  • 0.039 (6)
  • 0.0394 (12)
  • 0.041 (6)
  • 0.047 (12)
  • 0.0472 (12)
  • 0.055 (6)
  • 0.0551 (6)
  • 0.058 (6)
  • 0.0591 (12)
  • 0.062 (12)
  • 0.0669 (6)
  • 0.067 (6)
  • 0.0689 (12)
  • 0.072 (6)
  • 0.076 (6)
  • 0.0768 (6)
  • 0.077 (6)
  • 0.078 (6)
  • 0.0787 (12)
  • 0.079 (8)
  • 0.0866 (12)
  • 0.088 (12)
  • 0.0886 (10)
  • 0.094 (12)
  • 0.097 (6)
  • 0.0984 (12)
  • 0.105 (6)
  • 0.108 (12)
  • 0.1083 (12)
  • 0.11 (6)
  • 0.118 (12)
  • 0.1181 (16)
  • 0.122 (6)
  • 0.125 (16)
  • 0.126 (16)
  • 0.1278 (6)
  • 0.128 (12)
  • 0.129 (6)
  • 0.131 (2)
  • 0.1378 (16)
  • 0.142 (6)
  • 0.147 (3)
  • 0.15 (6)
  • 0.151 (6)
  • 0.156 (6)
  • 0.157 (6)
  • 0.1574 (10)
  • 0.1575 (10)
  • 0.167 (10)
  • 0.1673 (2)
  • 0.169 (6)
  • 0.1771 (10)
  • 0.1772 (10)
  • 0.178 (6)
  • 0.185 (8)
  • 0.188 (10)
  • 0.189 (10)
  • 0.192 (2)
  • 0.195 (6)
  • 0.1969 (4)
  • 0.197 (4)
  • 0.202 (4)
  • 0.213 (4)
  • 0.2165 (4)
  • 0.2166 (2)
  • 0.219 (4)
  • 0.2362 (4)
  • 0.25 (4)
  • 0.255 (4)
to
Insert Size
  • 2 (6)
  • 3 (6)
  • 4 (4)
Maximum Cutting Depth
  • 5.33 (5)
to
Maximum Cutting Depth
  • 0.21 (5)
to
Insert Geometry
Cutting Tool Material
  • B H (10)
  • B L (6)
  • C N (10)
  • D P (8)
  • H T (16)
  • H W (16)
other
Tool Unit
  • I (16)
  • M (16)
Over All Length [L]
  • 70.0 (2)
  • 80.0 (2)
  • 90.0 (2)
  • 100.0 (2)
  • 110.0 (4)
  • 125.0 (1)
  • 140.0 (3)
to
Over All Length [L]
  • 2.7559 (2)
  • 3.1496 (2)
  • 3.5433 (2)
  • 3.937 (2)
  • 4.3307 (3)
  • 4.331 (1)
  • 4.9213 (1)
  • 5.5118 (3)
to
Insert Hand
  • L (9)
  • R (7)
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying 1- 10 of 16 results
Select Columns
Select Filters
Metric
Inch
Show
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
3790291 KM50TSS16FNEL2 KM50TSS16FNEL2 20.0000 .7874 11.0000 .4331 56.1600 2.211 80.0000 3.149 NG2R 0.44 0.97
    List price:
    $457.44 /each.
    Your price::
    Qty
    3790583 KM50TSS16FNER2 KM50TSS16FNER2 20.0000 .7874 11.0000 .4331 56.1600 2.211 80.0000 3.149 NG2L 0.44 0.97
      List price:
      $457.44 /each.
      Your price::
      Qty
      3790585 KM50TSS12ENER2 KM50TSS12ENER2 18.5000 .7283 11.0000 .4331 42.0100 1.653 70.0000 2.755 NG2L 0.44 0.97
        List price:
        $457.44 /each.
        Your price::
        Qty
        3790586 KM50TSS20HNEL2 KM50TSS20HNEL2 25.0000 .9843 13.0000 .5118 70.3200 2.768 100.0000 3.937 NG2R 0.58 1.28
          List price:
          $457.44 /each.
          Your price::
          Qty
          3790587 KM50TSS20HNER2 KM50TSS20HNER2 25.0000 .9843 13.0000 .5118 70.3200 2.768 100.0000 3.937 NG2L 0.58 1.28
            List price:
            $457.44 /each.
            Your price::
            Qty
            3790588 KM50TSS25JNEL3 KM50TSS25JNEL3 34.0000 1.338 17.0000 .6693 88.1100 3.468 110.0000 4.330 NG3R 0.67 1.48
              List price:
              $457.44 /each.
              Your price::
              Qty
              3790589 KM50TSS25JNER3 KM50TSS25JNER3 34.0000 1.338 17.0000 .6693 88.1100 3.468 110.0000 4.330 NG3L 0.67 1.48
                List price:
                $457.44 /each.
                Your price::
                Qty
                3790590 KM50TSS32GNEL3 KM50TSS32GNEL3 40.0000 1.574 22.0000 .8661 70.4700 2.774 90.0000 3.543 NG3R 0.71 1.57
                  List price:
                  $457.44 /each.
                  Your price::
                  Qty
                  3790591 KM50TSS32GNER3 KM50TSS32GNER3 40.0000 1.574 22.0000 .8661 70.4700 2.774 90.0000 3.543 NG3L 0.71 1.57
                    List price:
                    $457.44 /each.
                    Your price::
                    Qty
                    3790593 KM50TSS32KNER3 KM50TSS32KNER3 40.0000 1.574 22.0000 .8661 96.2600 3.789 125.0000 4.921 NG3L 0.97 2.14
                      List price:
                      $457.44 /each.
                      Your price::
                      Qty
                      3790595 KM50TSS40JNER4 KM50TSS40JNER4 50.0000 1.969 27.0000 1.063 91.2600 3.593 110.0000 4.331   1.09 2.41
                        List price:
                        $457.44 /each.
                        Your price::
                        Qty
                        3790598 KM50TSS40LNER3 KM50TSS40LNER3 50.0000 1.968 27.0000 1.063 120.3400 4.737 140.0000 5.511 NG3L 1.40 3.09
                          List price:
                          $457.44 /each.
                          Your price::
                          Qty
                          3790599 KM50TSS40LNER4 KM50TSS40LNER4 50.0000 1.968 27.0000 1.063 120.3400 4.737 140.0000 5.511 NG4L 1.39 3.06
                            List price:
                            $457.44 /each.
                            Your price::
                            Qty
                            3790584 KM50TSS12ENEL2 KM50TSS12ENEL2 18.5000 .7283 11.0000 .4331 42.0100 1.653 70.0000 2.755 NG2R 0.44 0.97
                              List price:
                              $457.44 /each.
                              Your price::
                              Qty
                              3790594 KM50TSS40JNEL4 KM50TSS40JNEL4 50.0000 1.968 27.0000 1.063 91.2600 3.592 110.0000 4.330 NG4R 1.09 2.41
                                List price:
                                $457.44 /each.
                                Your price::
                                Qty
                                3790597 KM50TSS40LNEL4 KM50TSS40LNEL4 50.0000 1.968 27.0000 1.063 120.3400 4.737 140.0000 5.511 NG4R 1.39 3.06
                                  List price:
                                  $457.44 /each.
                                  Your price::
                                  Qty
                                  List price:
                                  Discount: %
                                  Your price::
                                  Replacement This item is not available
                                  Replacement Product This item may be available through a distributor
                                  Qty

                                  Sold in pkg. of