-
P Steel (5)
-
P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (5)
-
P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (5)
-
P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (5)
-
P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (5)
-
P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (5)
-
P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (5)
-
P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (5)
-
-
M Stainless Steel (5)
-
M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (5)
-
M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (5)
-
M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (5)
-
-
K Cast Iron (5)
-
K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (5)
-
K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (5)
-
K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (5)
-
-
N Non-Ferrous Materials (5)
-
N1Wrought Aluminum (5)
-
N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (5)
-
N3High-Silicon Aluminum Alloys Si >12.2% (5)
-
-
S High-Temp Alloys (5)
-
S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (5)
-
S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (5)
-
S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (5)
-
S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (5)
-
-
H Hardened Materials (5)
-
H1Hardened Materials 44-48 HRC (5)
-
-
Face Milling (5)
-
Pocket (5)
-
Pocket Helical (5)
-
Pocket Plunge Milling (5)
-
Profile Milling (5)
-
Ramping (5)
-
Shoulder Roughing (5)
-
Shoulder Square End (5)
-
Slot Square End (5)
-
1.072 in (1)
-
1.583 in (1)
-
2.251 in (1)
-
3.036 in (1)
-
4.021 in (1)
-
27.225 mm (1)
-
40.2 mm (1)
-
57.176 mm (1)
-
77.125 mm (1)
-
102.125 mm (1)
-
50.0 mm (1)
-
63.0 mm (1)
-
80.0 mm (1)
-
100.0 mm (1)
-
125.0 mm (1)
-
1.969 in (1)
-
2.48 in (1)
-
3.15 in (1)
-
3.938 in (1)
-
4.921 in (1)
-
1.575 in (1)
-
1.772 in (1)
-
1.969 in (2)
-
2.48 in (1)
-
40.0 mm (1)
-
45.0 mm (1)
-
50.0 mm (2)
-
63.0 mm (1)
-
10 (1)
-
4 (1)
-
5 (1)
-
6 (1)
-
8 (1)
-
1.575 in (1)
-
1.772 in (1)
-
1.969 in (2)
-
2.48 in (1)
-
40.0 mm (1)
-
45.0 mm (1)
-
50.0 mm (2)
-
63.0 mm (1)
-
WP25PM (5)
-
WS40PM (5)
-
0.32 (1)
-
0.42 (1)
-
0.58 (1)
-
0.86 (1)
-
1.36 (1)
-
22.0 mm (2)
-
27.0 mm (1)
-
32.0 mm (1)
-
40.0 mm (1)
-
0.866 in (2)
-
1.063 in (1)
-
1.26 in (1)
-
1.575 in (1)
SAP Material Number | ISO Catalog Number | ANSI Catalog Number | [D1] Effective Cutting Diameter | [D1] Effective Cutting Diameter | [L] Overall Length | [L] Overall Length | [D] Adapter / Shank / Bore Diameter | [D] Adapter / Shank / Bore Diameter | [D6] Hub Diameter | [D6] Hub Diameter | [AP1MAX] 1st Maximum Cutting Depth | [AP1MAX] 1st Maximum Cutting Depth | [D1MAX] Maximum Cutting Diameter | [D1MAX] Maximum Cutting Diameter | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
6597776 | VXF050Z04S22XE16 | VXF050Z04S22XE16 | 27.228 | 1.072 | 45 | 1.771 | 22 | .8661 | 45 | 1.771 | 3.5 | .1378 | 50 | 1.968 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
List price:
C$609.17
/each
Your price:
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
6597777 | VXF063Z05S22XE16 | VXF063Z05S22XE16 | 40.203 | 1.582 | 40 | 1.574 | 22 | .8661 | 47.2 | 1.858 | 3.5 | .1378 | 63 | 2.48 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
List price:
C$676.77
/each
Your price:
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
6597778 | VXF080Z06S27XE16 | VXF080Z06S27XE16 | 57.187 | 2.251 | 50 | 1.968 | 27 | 1.063 | 58 | 2.283 | 3.5 | .1378 | 80 | 3.149 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
List price:
C$786.82
/each
Your price:
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
6597779 | VXF100Z08S32XE16 | VXF100Z08S32XE16 | 77.137 | 3.036 | 50 | 1.968 | 32 | 1.259 | 68 | 2.677 | 3.5 | .1378 | 100 | 3.937 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
List price:
C$936.40
/each
Your price:
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
6597780 | VXF125Z10S40XE16 | VXF125Z10S40XE16 | 102.132 | 4.02 | 63 | 2.48 | 40 | 1.574 | 84 | 3.307 | 3.5 | .1378 | 125 | 4.921 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
List price:
C$1,254.29
/each
Your price:
Qty
|
Replacement Product Please contact customer service for assistance
Sold in pkg. of
Insert Selection Guide
Light
|
General
|
Heavy
|
||||
Material
|
Geometry | Grade | Geometry | Grade | Geometry | Grade |
P1–P2 | XEPT-MM | WP25PM | XEPT-MM | WS40PM | XEPT-MM | WS40PM |
P3–P4 | XEPT-MM | WP25PM | XEPT-MM | WS40PM | XEPT-MM | WS40PM |
P5–P6 | XEPT-MM | WP25PM | XEPT-MM | WS40PM | XEPT-MM | WS40PM |
M1–M2 | XEPT-MM | WS40PM | XEPT-MM | WS40PM | XEPT-MM | WS40PM |
M3 | XEPT-MM | WS40PM | XEPT-MM | WS40PM | XEPT-MM | WS40PM |
S1–S2 | XEPT-MM | WP25PM | XEPT-MM | WS40PM | XEPT-MM | WS40PM |
S3 | XEPT-MM | WS40PM | XEPT-MM | WS40PM | XEPT-MM | WS40PM |
S4 | XEPT-MM | WS40PM | XEPT-MM | WS40PM | XEPT-MM | WS40PM |
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
5 % | 10 % | 20 % | 30 % | 40–100 % | ||||||||||||
.E..MM | 0,40 | 1,28 | 2,18 | 0,29 | 0,92 | 1,54 | 0,21 | 0,68 | 1,14 | 0,19 | 0,60 | 0,99 | 0,17 | 0,55 | 0,91 | .E..MM |
Light
|
General
|
Heavy
|
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
5 % | 10 % | 20 % | 30 % | 40–100 % | ||||||||||||
.E..MM | 0,36 | 1,15 | 1,95 | 0,26 | 0,83 | 1,38 | 0,19 | 0,62 | 1,03 | 0,17 | 0,54 | 0,89 | 0,15 | 0,49 | 0,82 | .E..MM |
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
5 % | 10 % | 20 % | 30 % | 40–100 % | ||||||||||||
.E..MM | 0,30 | 0,98 | 1,66 | 0,22 | 0,71 | 1,18 | 0,17 | 0,53 | 0,88 | 0,14 | 0,46 | 0,76 | 0,13 | 0,42 | 0,70 | .E..MM |
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
5% | 10% | 20% | 30% | 40–100% | ||||||||||||
.E..MM | .016 | .051 | .086 | .011 | .036 | .061 | .009 | .027 | .045 | .007 | .024 | .039 | .007 | .022 | .036 | .E..MM |
Light
|
General
|
Heavy
|
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
5% | 10% | 20% | 30% | 40–100% | ||||||||||||
.E..MM | .012 | .039 | .066 | .009 | .028 | .047 | .007 | .021 | .035 | .006 | .018 | .030 | .005 | .017 | .028 | .E..MM |
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
5% | 10% | 20% | 30% | 40–100% | ||||||||||||
.E..MM | .014 | .046 | .077 | .010 | .033 | .055 | .008 | .024 | .041 | .007 | .021 | .036 | .006 | .019 | .032 | .E..MM |
Recommended Starting Speeds [m/min]*
Material Group | WP25PM | WS40PM | |||||
P | 1 | 395 | 340 | 325 | – | – | – |
2 | 330 | 290 | 240 | – | – | – | |
3 | 305 | 260 | 210 | – | – | – | |
4 | 270 | 220 | 180 | – | – | – | |
5 | 220 | 205 | 180 | 205 | 175 | 145 | |
6 | 200 | 150 | 120 | 180 | 130 | 95 | |
M | 1 | 245 | 215 | 200 | 250 | 205 | 170 |
2 | 220 | 190 | 155 | 215 | 175 | 145 | |
3 | 170 | 145 | 115 | 175 | 130 | 100 | |
S | 1 | 50 | 40 | 30 | 50 | 40 | 30 |
2 | 50 | 40 | 30 | 50 | 40 | 30 | |
3 | 60 | 50 | 30 | 60 | 50 | 30 | |
4 | 85 | 60 | 40 | 70 | 60 | 35 |
Recommended Starting Speeds [SFM]*
Material Group | WP25PM | WS40PM | |||||
P | 1 | 1295 | 1115 | 1065 | – | – | – |
2 | 1085 | 950 | 785 | – | – | – | |
3 | 1000 | 855 | 690 | – | – | – | |
4 | 885 | 720 | 590 | – | – | – | |
5 | 720 | 675 | 590 | 675 | 575 | 475 | |
6 | 655 | 490 | 395 | 590 | 425 | 310 | |
M | 1 | 805 | 705 | 655 | 820 | 675 | 560 |
2 | 720 | 625 | 510 | 705 | 575 | 475 | |
3 | 560 | 475 | 375 | 575 | 425 | 330 | |
S | 1 | 165 | 130 | 100 | 165 | 130 | 100 |
2 | 165 | 130 | 100 | 165 | 130 | 100 | |
3 | 195 | 165 | 100 | 195 | 165 | 100 | |
4 | 280 | 195 | 130 | 230 | 195 | 115 |