Suggestions

Product Suggestions

Product Categories

Resources

Quick Order Page
successfully added to cart
View Cart

Notifications

Mark all as read

General Purpose Solid Carbide End Mills • Roughing/Finishing

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (1537)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1537)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1537)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (1537)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (1348)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (1348)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (461)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (461)
  • M Stainless Steel (1348)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (1348)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (1348)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (461)
  • K Cast Iron (1348)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (1348)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (1348)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (470)
  • N Non-Ferrous Materials (877)
    • N1
      Wrought Aluminum
      (736)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (736)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (455)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (522)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (810)
    • N6
      Carbon, Graphite Composites, CFRP
      (455)
    • N7
      MMC's
      (454)
  • S High-Temp Alloys (461)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (461)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (461)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (461)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (461)
  • H Hardened Materials (461)
    • H1
      Hardened Materials 44-48 HRC
      (461)
    • H2
      Hardened Materials 48-55 HRC
      (456)
    • H3
      Hardened Materials 56-60 HRC
      (449)
    • H4
      Hardened Materials >60 HRC
      (449)
Select All Star
  • CN (228)
  • DE (311)
  • GB (133)
  • IN (148)
  • SG (206)
  • US (332)
Applications
Applications
  • Face Milling Face Milling (1173)
  • Pocket Pocket (1476)
  • Pocket Helical Pocket Helical (1476)
  • Pocket Milling Pocket Milling (1475)
  • Pocket Plunge Milling Pocket Plunge Milling (263)
  • Profile Milling Profile Milling (270)
  • Ramping Ramping (1520)
  • Shoulder Ball Nose Shoulder Ball Nose (270)
  • Shoulder Milling Shoulder Milling (1476)
  • Shoulder Roughing Shoulder Roughing (959)
  • Shoulder Square End Shoulder Square End (1249)
  • Slot Ball Nose Slot Ball Nose (270)
  • Slot Milling Slot Milling (886)
  • Slot Square End Slot Square End (665)
Cutting Diameter
Cutting Diameter
  • 0.0156 in (2)
  • 0.0312 in (4)
  • 0.0313 in (4)
  • 0.0394 in (7)
  • 0.0469 in (2)
  • 0.0591 in (7)
  • 0.0625 in (17)
  • 0.0709 in (1)
  • 0.0781 in (7)
  • 0.0787 in (22)
  • 0.079 in (4)
  • 0.0938 in (20)
  • 0.0984 in (16)
  • 0.1094 in (5)
  • 0.118 in (7)
  • 0.1181 in (46)
  • 0.125 in (38)
  • 0.1378 in (13)
  • 0.1406 in (3)
  • 0.1562 in (10)
  • 0.157 in (6)
  • 0.1575 in (67)
  • 0.1719 in (2)
  • 0.1772 in (20)
  • 0.1875 in (38)
  • 0.1969 in (63)
  • 0.197 in (4)
  • 0.2031 in (2)
  • 0.2165 in (14)
  • 0.2188 in (8)
  • 0.2344 in (2)
  • 0.236 in (8)
  • 0.2362 in (80)
  • 0.25 in (45)
  • 0.2559 in (2)
  • 0.2656 in (2)
  • 0.2756 in (25)
  • 0.2812 in (4)
  • 0.2813 in (1)
  • 0.2953 in (2)
  • 0.2969 in (1)
  • 0.3125 in (35)
  • 0.315 in (81)
  • 0.3281 in (1)
  • 0.3438 in (4)
  • 0.3543 in (15)
  • 0.3594 in (1)
  • 0.375 in (45)
  • 0.3906 in (1)
  • 0.3937 in (74)
  • 0.394 in (7)
  • 0.4062 in (3)
  • 0.4219 in (1)
  • 0.4331 in (2)
  • 0.4375 in (17)
  • 0.4531 in (1)
  • 0.4688 in (3)
  • 0.472 in (5)
  • 0.4724 in (97)
  • 0.4844 in (1)
  • 0.5 in (51)
  • 0.5512 in (62)
  • 0.5625 in (19)
  • 0.5906 in (2)
  • 0.625 in (49)
  • 0.6299 in (86)
  • 0.63 in (1)
  • 0.6875 in (3)
  • 0.7087 in (43)
  • 0.75 in (53)
  • 0.7874 in (74)
  • 0.8125 in (1)
  • 0.875 in (27)
  • 1.0 in (40)
  • 1.25 in (2)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 0.397 mm (2)
  • 0.794 mm (8)
  • 1.0 mm (7)
  • 1.1906 mm (1)
  • 1.191 mm (1)
  • 1.5 mm (7)
  • 1.588 mm (17)
  • 1.8 mm (1)
  • 1.984 mm (7)
  • 2.0 mm (26)
  • 2.381 mm (20)
  • 2.5 mm (16)
  • 2.778 mm (5)
  • 3.0 mm (53)
  • 3.175 mm (38)
  • 3.5 mm (13)
  • 3.572 mm (3)
  • 3.969 mm (10)
  • 4.0 mm (73)
  • 4.366 mm (2)
  • 4.5 mm (20)
  • 4.762 mm (4)
  • 4.7625 mm (4)
  • 4.763 mm (30)
  • 5.0 mm (67)
  • 5.159 mm (2)
  • 5.5 mm (14)
  • 5.556 mm (8)
  • 5.953 mm (2)
  • 6.0 mm (88)
  • 6.35 mm (45)
  • 6.5 mm (2)
  • 6.747 mm (2)
  • 7.0 mm (25)
  • 7.144 mm (5)
  • 7.5 mm (2)
  • 7.541 mm (1)
  • 7.938 mm (35)
  • 8.0 mm (81)
  • 8.334 mm (1)
  • 8.731 mm (4)
  • 9.0 mm (15)
  • 9.128 mm (1)
  • 9.525 mm (45)
  • 9.922 mm (1)
  • 10.0 mm (81)
  • 10.319 mm (3)
  • 10.716 mm (1)
  • 11.0 mm (2)
  • 11.113 mm (17)
  • 11.509 mm (1)
  • 11.906 mm (3)
  • 12.0 mm (102)
  • 12.303 mm (1)
  • 12.7 mm (51)
  • 14.0 mm (62)
  • 14.288 mm (19)
  • 15.0 mm (2)
  • 15.875 mm (49)
  • 16.0 mm (87)
  • 17.462 mm (2)
  • 17.463 mm (1)
  • 18.0 mm (43)
  • 19.05 mm (53)
  • 20.0 mm (74)
  • 20.638 mm (1)
  • 22.225 mm (27)
  • 25.4 mm (40)
  • 31.75 mm (2)
Cutting Diameter Min to Cutting Diameter Max
Cutting Length
Cutting Length
  • 0.794 mm (2)
  • 1.0 mm (2)
  • 1.5 mm (2)
  • 1.984 mm (8)
  • 2.0 mm (2)
  • 2.778 mm (3)
  • 3.0 mm (8)
  • 3.175 mm (7)
  • 4.0 mm (30)
  • 4.762 mm (17)
  • 4.763 mm (1)
  • 5.0 mm (24)
  • 6.0 mm (14)
  • 6.3 mm (14)
  • 6.35 mm (8)
  • 7.0 mm (43)
  • 7.938 mm (8)
  • 8.0 mm (49)
  • 9.0 mm (9)
  • 9.5 mm (10)
  • 9.525 mm (18)
  • 10.0 mm (41)
  • 11.0 mm (31)
  • 11.112 mm (2)
  • 12.0 mm (23)
  • 12.7 mm (36)
  • 13.0 mm (36)
  • 14.0 mm (26)
  • 14.288 mm (12)
  • 15.0 mm (6)
  • 15.875 mm (43)
  • 16.0 mm (51)
  • 18.0 mm (12)
  • 19.0 mm (51)
  • 19.05 mm (56)
  • 20.0 mm (43)
  • 20.638 mm (20)
  • 22.0 mm (57)
  • 22.225 mm (5)
  • 24.0 mm (5)
  • 25.0 mm (29)
  • 25.4 mm (78)
  • 26.0 mm (54)
  • 28.0 mm (29)
  • 28.575 mm (26)
  • 30.0 mm (6)
  • 31.0 mm (12)
  • 31.75 mm (33)
  • 32.0 mm (79)
  • 34.925 mm (3)
  • 38.0 mm (41)
  • 38.1 mm (80)
  • 40.0 mm (4)
  • 41.0 mm (8)
  • 41.275 mm (5)
  • 44.45 mm (5)
  • 45.0 mm (29)
  • 46.0 mm (1)
  • 50.0 mm (7)
  • 50.8 mm (19)
  • 56.0 mm (23)
  • 57.15 mm (35)
  • 60.0 mm (2)
  • 64.0 mm (5)
  • 65.0 mm (1)
  • 75.0 mm (44)
  • 76.2 mm (30)
  • 101.6 mm (15)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 0.0312 in (1)
  • 0.0313 in (1)
  • 0.039 in (2)
  • 0.059 in (2)
  • 0.0781 in (8)
  • 0.0787 in (2)
  • 0.1094 in (3)
  • 0.1181 in (8)
  • 0.125 in (7)
  • 0.157 in (4)
  • 0.1575 in (26)
  • 0.1875 in (18)
  • 0.1969 in (18)
  • 0.197 in (6)
  • 0.2362 in (14)
  • 0.248 in (14)
  • 0.25 in (8)
  • 0.2756 in (36)
  • 0.276 in (7)
  • 0.3125 in (8)
  • 0.315 in (49)
  • 0.3543 in (9)
  • 0.374 in (10)
  • 0.375 in (18)
  • 0.3937 in (40)
  • 0.394 in (1)
  • 0.433 in (6)
  • 0.4331 in (25)
  • 0.4375 in (2)
  • 0.4724 in (23)
  • 0.5 in (36)
  • 0.5118 in (30)
  • 0.512 in (6)
  • 0.5512 in (26)
  • 0.5625 in (12)
  • 0.591 in (6)
  • 0.625 in (43)
  • 0.6299 in (50)
  • 0.63 in (1)
  • 0.7087 in (12)
  • 0.748 in (51)
  • 0.75 in (56)
  • 0.7874 in (43)
  • 0.8125 in (20)
  • 0.866 in (1)
  • 0.8661 in (56)
  • 0.875 in (5)
  • 0.9449 in (5)
  • 0.9843 in (29)
  • 1.0 in (78)
  • 1.0236 in (53)
  • 1.024 in (1)
  • 1.1024 in (29)
  • 1.125 in (26)
  • 1.1811 in (6)
  • 1.2205 in (12)
  • 1.25 in (33)
  • 1.2598 in (79)
  • 1.375 in (3)
  • 1.4961 in (41)
  • 1.5 in (80)
  • 1.5748 in (4)
  • 1.6142 in (8)
  • 1.625 in (5)
  • 1.75 in (5)
  • 1.7717 in (29)
  • 1.811 in (1)
  • 1.9685 in (7)
  • 2.0 in (19)
  • 2.2047 in (23)
  • 2.25 in (35)
  • 2.3622 in (2)
  • 2.5197 in (5)
  • 2.5591 in (1)
  • 2.9528 in (44)
  • 3.0 in (30)
  • 4.0 in (15)
Cutting Length Min to Cutting Length Max
Reach
Reach
  • 0.0906 in (1)
  • 0.098 in (2)
  • 0.128 in (2)
  • 0.1297 in (1)
  • 0.1496 in (2)
  • 0.157 in (6)
  • 0.1766 in (1)
  • 0.177 in (3)
  • 0.197 in (6)
  • 0.202 in (1)
  • 0.2042 in (1)
  • 0.2062 in (1)
  • 0.2063 in (1)
  • 0.2179 in (3)
  • 0.2289 in (3)
  • 0.229 in (1)
  • 0.23 in (2)
  • 0.247 in (2)
  • 0.2547 in (1)
  • 0.2672 in (1)
  • 0.2717 in (4)
  • 0.272 in (4)
  • 0.2756 in (2)
  • 0.276 in (6)
  • 0.2914 in (4)
  • 0.293 in (3)
  • 0.308 in (3)
  • 0.3085 in (2)
  • 0.315 in (11)
  • 0.3408 in (4)
  • 0.3425 in (2)
  • 0.3543 in (3)
  • 0.3551 in (2)
  • 0.371 in (2)
  • 0.374 in (3)
  • 0.3937 in (2)
  • 0.3967 in (4)
  • 0.4328 in (9)
  • 0.433 in (7)
  • 0.4331 in (4)
  • 0.4941 in (5)
  • 0.4969 in (3)
  • 0.5027 in (2)
  • 0.5118 in (4)
  • 0.512 in (6)
  • 0.5303 in (2)
  • 0.539 in (3)
  • 0.5394 in (2)
  • 0.555 in (2)
  • 0.5565 in (2)
  • 0.5591 in (4)
  • 0.576 in (4)
  • 0.5841 in (3)
  • 0.591 in (6)
  • 0.6011 in (2)
  • 0.6039 in (2)
  • 0.613 in (3)
  • 0.6208 in (2)
  • 0.621 in (5)
  • 0.6289 in (2)
  • 0.6299 in (4)
  • 0.694 in (3)
  • 0.6943 in (3)
  • 0.7087 in (3)
  • 0.7214 in (2)
  • 0.731 in (3)
  • 0.7336 in (2)
  • 0.734 in (2)
  • 0.7347 in (2)
  • 0.741 in (2)
  • 0.748 in (7)
  • 0.7598 in (2)
  • 0.7874 in (5)
  • 0.805 in (3)
  • 0.8091 in (2)
  • 0.8109 in (2)
  • 0.837 in (2)
  • 0.8661 in (7)
  • 0.891 in (2)
  • 0.8911 in (2)
  • 0.93 in (8)
  • 0.9412 in (2)
  • 0.9449 in (2)
  • 0.9492 in (2)
  • 0.9567 in (2)
  • 0.9843 in (6)
  • 1.0236 in (10)
  • 1.055 in (2)
  • 1.1024 in (4)
  • 1.127 in (2)
  • 1.2205 in (2)
  • 1.2598 in (15)
  • 1.4469 in (2)
  • 1.4961 in (11)
  • 1.6 in (2)
  • 1.6142 in (2)
  • 1.7717 in (5)
  • 1.9685 in (2)
  • 2.2047 in (5)
  • 2.9528 in (11)
Reach Min to Reach Max
Reach
Reach
  • 2.3 mm (1)
  • 2.5 mm (2)
  • 3.25 mm (2)
  • 3.294 mm (1)
  • 3.801 mm (2)
  • 4.0 mm (6)
  • 4.48 mm (2)
  • 4.485 mm (1)
  • 4.49 mm (1)
  • 5.0 mm (6)
  • 5.128 mm (1)
  • 5.13 mm (1)
  • 5.187 mm (1)
  • 5.238 mm (1)
  • 5.239 mm (1)
  • 5.5 mm (1)
  • 5.536 mm (2)
  • 5.8 mm (4)
  • 5.85 mm (2)
  • 6.275 mm (2)
  • 6.469 mm (1)
  • 6.787 mm (1)
  • 6.9 mm (6)
  • 6.902 mm (2)
  • 7.0 mm (8)
  • 7.112 mm (1)
  • 7.26 mm (1)
  • 7.302 mm (1)
  • 7.342 mm (2)
  • 7.4 mm (4)
  • 7.401 mm (3)
  • 7.8 mm (3)
  • 7.835 mm (2)
  • 8.0 mm (11)
  • 8.657 mm (4)
  • 8.7 mm (2)
  • 9.0 mm (3)
  • 9.018 mm (2)
  • 9.425 mm (2)
  • 9.5 mm (3)
  • 10.0 mm (3)
  • 10.075 mm (4)
  • 10.993 mm (7)
  • 11.0 mm (13)
  • 12.5 mm (3)
  • 12.549 mm (2)
  • 12.55 mm (2)
  • 12.621 mm (2)
  • 12.77 mm (2)
  • 12.8 mm (2)
  • 13.0 mm (10)
  • 13.469 mm (2)
  • 13.7 mm (4)
  • 14.097 mm (2)
  • 14.134 mm (2)
  • 14.2 mm (4)
  • 14.6 mm (3)
  • 14.835 mm (3)
  • 15.0 mm (6)
  • 15.268 mm (2)
  • 15.3 mm (2)
  • 15.6 mm (3)
  • 15.768 mm (2)
  • 15.8 mm (4)
  • 16.0 mm (7)
  • 17.6 mm (4)
  • 17.634 mm (2)
  • 18.0 mm (3)
  • 18.6 mm (6)
  • 18.8 mm (2)
  • 19.0 mm (7)
  • 19.3 mm (2)
  • 20.0 mm (5)
  • 20.447 mm (3)
  • 20.55 mm (2)
  • 20.598 mm (2)
  • 21.3 mm (2)
  • 22.0 mm (8)
  • 22.6 mm (3)
  • 23.6 mm (4)
  • 23.63 mm (4)
  • 23.908 mm (2)
  • 24.0 mm (2)
  • 24.11 mm (2)
  • 24.3 mm (2)
  • 25.0 mm (6)
  • 26.0 mm (11)
  • 26.795 mm (2)
  • 28.0 mm (4)
  • 28.6 mm (3)
  • 31.0 mm (2)
  • 32.0 mm (15)
  • 38.0 mm (11)
  • 39.1 mm (2)
  • 40.64 mm (2)
  • 41.0 mm (2)
  • 45.0 mm (5)
  • 50.0 mm (2)
  • 56.0 mm (5)
  • 75.0 mm (11)
Reach Min to Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (5)
  • 90.0 (1533)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Straight-Cylindrical (1263)
  • Weldon (245)
  • Weldon Short (30)
Number of Flutes
Number of Flutes
  • 2 (548)
  • 3 (331)
  • 4 (659)
Corner configuration
Corner Style
Corner Style
  • BALL NOSE (280)
  • CHAMFER (307)
  • RADIUS (164)
  • SQUARE END (779)
  • TORUS (2)
Corner Radius
Corner Radius
  • 0.0 in (1092)
  • 0.01 in (8)
  • 0.015 in (24)
  • 0.0156 in (3)
  • 0.0197 in (27)
  • 0.02 in (22)
  • 0.0234 in (2)
  • 0.0295 in (2)
  • 0.03 in (20)
  • 0.0312 in (2)
  • 0.0313 in (1)
  • 0.0391 in (2)
  • 0.0394 in (25)
  • 0.045 in (16)
  • 0.0469 in (5)
  • 0.0492 in (1)
  • 0.0546 in (1)
  • 0.0547 in (1)
  • 0.059 in (1)
  • 0.0591 in (14)
  • 0.06 in (16)
  • 0.0625 in (10)
  • 0.0689 in (1)
  • 0.0703 in (1)
  • 0.0781 in (4)
  • 0.0787 in (14)
  • 0.079 in (1)
  • 0.0859 in (1)
  • 0.09 in (8)
  • 0.0938 in (9)
  • 0.0984 in (11)
  • 0.1016 in (1)
  • 0.1094 in (2)
  • 0.1172 in (1)
  • 0.118 in (1)
  • 0.1181 in (17)
  • 0.125 in (19)
  • 0.1328 in (1)
  • 0.1378 in (1)
  • 0.1406 in (1)
  • 0.1563 in (8)
  • 0.157 in (1)
  • 0.1575 in (16)
  • 0.1719 in (1)
  • 0.1875 in (10)
  • 0.1969 in (15)
  • 0.197 in (1)
  • 0.2031 in (1)
  • 0.2188 in (2)
  • 0.236 in (1)
  • 0.2362 in (18)
  • 0.25 in (12)