successfully added to cart
View Cart

Notifications

Mark all as read
Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Applications
  • Grooving Grooving (2)
  • ID Grooving ID Grooving (2)
  • ID Thread Turning ID Thread Turning (2)
  • OD Thread Turning OD Thread Turning (1)
  • Threading Threading (2)
Workpiece Material
  • P Steel (4)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (4)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (4)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (4)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (4)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (4)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (4)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (4)
  • M Stainless Steel (4)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (4)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (4)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (4)
  • K Cast Iron (4)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (4)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (4)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (4)
  • N Non-Ferrous Materials (4)
    • N1
      Wrought Aluminum
      (4)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (4)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (4)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (4)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (4)
    • N6
      Carbon, Graphite Composites, CFRP
      (4)
    • N7
      MMC's
      (4)
  • S High-Temp Alloys (4)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (4)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (4)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (4)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (4)
  • H Hardened Materials (4)
    • H1
      Hardened Materials 44-48 HRC
      (4)
    • H2
      Hardened Materials 48-55 HRC
      (4)
Type of Thread
  • 60 (4)
  • BUTTRESS (4)
  • M (2)
  • UN (4)
Cutting Condition
  • Heavily Interrupted Cut (4)
  • Lightly Interrupted Cut (4)
  • Smooth Cut (4)
  • Varying Depth of Cut (4)
Cutting Condition Material
  • H-All (4)
  • K-All (4)
  • M-All (4)
  • N-All (4)
  • P-All (4)
  • S-All (4)
Tool Cutting Edge Angle
  • 90.0 (4)
to
Connection Style
  • KM (4)
Cutting Edges Per Insert
  • 1.0 (4)
  • 2.0 (4)
to
Corner configuration
Corner Radius
  • 0.076 (4)
  • 0.08 (4)
  • 0.089 (4)
  • 0.09 (4)
  • 0.1 (4)
  • 0.102 (4)
  • 0.185 (2)
  • 0.19 (4)
  • 0.191 (4)
  • 0.202 (2)
  • 0.25 (2)
  • 0.254 (2)
  • 0.5 (4)
  • 0.75 (4)
  • 0.787 (4)
  • 1.0 (4)
  • 1.194 (4)
  • 1.25 (4)
  • 1.5 (4)
  • 1.588 (4)
  • 1.75 (4)
to
Corner Radius
  • 0.003 (4)
  • 0.0031 (4)
  • 0.0035 (4)
  • 0.004 (4)
  • 0.0075 (4)
  • 0.008 (2)
  • 0.01 (2)
  • 0.0197 (4)
  • 0.0295 (4)
  • 0.031 (4)
  • 0.0394 (4)
  • 0.047 (4)
  • 0.0492 (4)
  • 0.0591 (4)
  • 0.0625 (4)
  • 0.0689 (4)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • K2885 (4)
  • K313 (4)
  • K420 (4)
  • K4H (2)
  • K68 (4)
  • KC250 (4)
  • KC5010 (4)
  • KC5025 (4)
  • KC5410 (4)
  • KC710 (4)
  • KC720 (4)
  • KC722 (4)
  • KC730 (4)
  • KC810 (4)
  • KC850 (4)
  • KC910 (2)
  • KC9110 (4)
  • KC9320 (4)
  • KC935 (4)
  • KC950 (4)
  • KCK20 (2)
  • KCK20B (4)
  • KCP10B (4)
  • KCP25B (4)
  • KCU10 (4)
  • KCU25 (4)
  • KT175 (4)
  • KT315 (4)
  • KU10T (4)
  • KU25T (4)
  • KU30T (4)
  • THM (4)
  • TN10P (2)
  • TN6010 (4)
  • TN6025 (4)
  • TN7110 (4)
  • WU10PT (2)
Hand Of Tool
  • L (2)
  • R (2)
Minimum Axial Groove Diameter
  • 0.7283 (1)
  • 0.787 (2)
  • 0.9843 (1)
to
Minimum Axial Groove Diameter
  • 18.5 (1)
  • 20.0 (2)
  • 25.0 (1)
to
Maximum Axial Groove Diameter
  • 9999.0 (4)
to
Maximum Axial Groove Diameter
  • 393.661 (4)
to
Cutting Direction
  • S (4)
Rake Angle Style
  • NEUTRAL (ZERO) (4)
Maximum Bore Depth
  • 42.0 (1)
  • 57.25 (2)
  • 60.0 (1)
to
Maximum Bore Depth
  • 1.654 (1)
  • 2.254 (2)
  • 2.362 (1)
to
Boring Bar Material
  • S (4)
Wiper Insert
  • N (4)
Front-End
Clamp Style
  • N (4)
Insert Shape
  • TN-TOP NOTCH (4)
Cutting Width
  • 0.5 (4)
  • 0.787 (4)
  • 0.8 (4)
  • 0.889 (4)
  • 0.991 (4)
  • 1.0 (4)
  • 1.041 (4)
  • 1.19 (4)
  • 1.194 (4)
  • 1.199 (2)
  • 1.2 (4)
  • 1.39 (4)
  • 1.397 (4)
  • 1.4 (4)
  • 1.473 (4)
  • 1.5 (4)
  • 1.56 (2)
  • 1.57 (2)
  • 1.575 (4)
  • 1.69 (4)
  • 1.7 (4)
  • 1.702 (4)
  • 1.75 (4)
  • 1.94 (4)
  • 1.95 (4)
  • 1.956 (4)
  • 2.0 (4)
  • 2.007 (4)
  • 2.2 (4)
  • 2.235 (4)
  • 2.24 (4)
  • 2.25 (4)
  • 2.388 (4)
  • 2.5 (4)
  • 2.74 (4)
  • 2.743 (4)
  • 2.75 (4)
  • 2.997 (4)
  • 3.0 (4)
  • 3.175 (4)
  • 3.18 (2)
  • 3.2 (4)
  • 3.245 (4)
  • 3.251 (4)
  • 3.27 (4)
  • 3.5 (4)
  • 3.73 (2)
  • 3.81 (4)
  • 3.84 (4)
to
Cutting Width
  • 0.0197 (4)
  • 0.031 (4)
  • 0.0315 (4)
  • 0.035 (4)
  • 0.039 (4)
  • 0.0394 (4)
  • 0.041 (4)
  • 0.047 (4)
  • 0.0472 (4)
  • 0.055 (4)
  • 0.0551 (4)
  • 0.058 (4)
  • 0.0591 (4)
  • 0.062 (4)
  • 0.0669 (4)
  • 0.067 (4)
  • 0.0689 (4)
  • 0.076 (4)
  • 0.0768 (4)
  • 0.077 (4)
  • 0.0787 (4)
  • 0.079 (4)
  • 0.0866 (4)
  • 0.088 (4)
  • 0.0886 (4)
  • 0.094 (4)
  • 0.0984 (4)
  • 0.108 (4)
  • 0.1083 (4)
  • 0.118 (4)
  • 0.1181 (4)
  • 0.125 (4)
  • 0.126 (4)
  • 0.1278 (4)
  • 0.128 (4)
  • 0.129 (4)
  • 0.1378 (4)
  • 0.147 (2)
  • 0.15 (4)
  • 0.151 (4)
to
Insert Size
  • 2 (4)
Maximum Cutting Depth
  • 3.18 (2)
  • 3.505 (1)
  • 3.51 (1)
to
Maximum Cutting Depth
  • 0.1252 (2)
  • 0.138 (2)
to
Insert Geometry
Cutting Tool Material
  • H T (4)
  • H W (4)
Back-End
Connection Type
  • TAPER SHANK (4)
System Size
  • KM32 (2)
  • KM32TS (2)
Back-End Diameter
  • 1.2598 (4)
to
Back-End Diameter
  • 32.0 (4)
to
other
Platform
  • KM32 (1)
Tool Unit
  • I (4)
  • M (4)
Display Configurable Products
  • false (4)
Over All Length [L]
  • 60.0 (1)
  • 70.0 (2)
  • 80.0 (1)
to
Over All Length [L]
  • 2.3622 (1)
  • 2.756 (2)
  • 3.1496 (1)
to
Insert Hand
  • L (2)
  • R (2)
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
1020729 KM32TSS16ENER2 KM32TSS16ENER2 20.0000 .7870 11.0000 .4330 57.2500 2.254 70.0000 2.756 NG2L 0.16 0.35
    Your price::
    Qty
    1020730 KM32TSS16ENEL2 KM32TSS16ENEL2 20.0000 .7870 11.0000 .4330 57.2500 2.254 70.0000 2.756 NG2R 0.16 0.35
      Your price::
      Qty
      1144713 KM32TSS20FNEL2 KM32TSS20FNEL2 25.0000 .9843 13.0000 .5118 60.0000 2.362 80.0000 3.149 NG2R    
        Your price::
        Qty
        1020727 KM32TSS12DNER2 KM32TSS12DNER2 18.5000 .7283 11.0000 .4331 42.0000 1.654 60.0000 2.362 NG2L    
          List price:
          $364.32 /each.
          Your price::
          Qty
          List price:
          Discount: %
          Your price::
          Replacement This item is not available
          Replacement Product This item may be available through a distributor
          Qty

          Sold in pkg. of

          product-image
          Please adjust the following properties from

          ISO Catalog Number

          ANSI Catalog Number

          to find similar products.
          If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
          You are about to create a duplicate . Do you want to proceed?
          You are about to delete Do you want to proceed?
          What would you like to rename your to?
          Please enter a valid name
          Please enter a name for the duplicate
          Please enter a valid name
          You are about to add to your My Solutions page. Do you want to proceed?
          Please enter a valid name
          Send a copy of

          Please enter a valid Email
          Please enter a valid name

          We have found the following CAD Drawings

          Select the files you are looking for and download them all at once

          You should be logged to see your dashboard information
          The product/s () you were trying to add to the cart is/are not available, please contact customer service.
          item(s) successfully added to the cart
          View Cart