S-Clamping
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (15)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(15)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(15)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(15)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(15)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(15)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(15)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(15)
- M Stainless Steel (15)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(15)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(15)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(15)
- K Cast Iron (15)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(15)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(15)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(15)
- N Non-Ferrous Materials (13)
- N1Wrought Aluminum (13)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(13)
- N3High-Silicon Aluminum Alloys Si >12.2%(7)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (13)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (13)
- N6Carbon, Graphite Composites, CFRP (13)
- N7MMC's (13)
- S High-Temp Alloys (15)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(15)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(15)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(15)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(15)
- H Hardened Materials (10)
- H1Hardened Materials 44-48 HRC(10)
- H2Hardened Materials 48-55 HRC(10)
- H3Hardened Materials 56-60 HRC(10)
- H4Hardened Materials >60 HRC(8)
- C CFRP Materials (13)
- C1CFRP, CFRP / CFRP (13)
- C2CFRP / Aluminium CFRP / Non-Ferrous (13)
Applications
Applications
Facing (14)
ID Facing (4)
Multiple Direction Cutting (17)
Profiling (3)
TRN Boring (4)
Turning (14)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (15)
- Lightly Interrupted Cut (15)
- Smooth Cut (15)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 72.5 (1)
- 90.0 (9)
- 93.0 (4)
- 95.0 (1)
- 107.5 (2)
to
Connection Style
Connection Style
- PSC (10)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (14)
- 2.0 (8)
- 4.0 (3)
to
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
- 2.559 in(2)
- 2.5591 in(15)
to
Corner Radius
Corner Radius
- 0.0 in(2)
- 0.001 in(2)
- 0.002 in(7)
- 0.003 in(2)
- 0.004 in(8)
- 0.008 in(8)
- 0.016 in(8)
- 0.031 in(8)
- 0.047 in(8)
- 0.197 in(1)
- 0.236 in(2)
- 0.313 in(2)
- 0.315 in(2)
- 0.394 in(2)
to
Corner Radius
Corner Radius
- 0.0 mm(2)
- 0.025 mm(2)
- 0.05 mm(7)
- 0.075 mm(2)
- 0.1 mm(8)
- 0.2 mm(8)
- 0.4 mm(8)
- 0.8 mm(8)
- 1.2 mm(8)
- 5.0 mm(1)
- 6.0 mm(2)
- 7.95 mm(2)
- 8.0 mm(2)
- 10.0 mm(2)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- HCK10 (1)
- K313 (13)
- K68 (5)
- KB1345 (3)
- KB1630 (1)
- KB5610 (2)
- KB5630 (7)
- KBH10 (7)
- KBH20 (8)
- KC5010 (13)
- KC5025 (10)
- KC5410 (11)
- KC730 (11)
- KC850 (13)
- KCK05 (8)
- KCK05B (7)
- KCK15 (12)
- KCK15B (14)
- KCK20 (10)
- KCK20B (13)
- KCM15 (8)
- KCM15B (8)
- KCM25 (13)
- KCM25B (10)
- KCM25S (2)
- KCM35 (8)
- KCP05 (7)
- KCP05B (5)
- KCP10 (10)
- KCP10B (14)
- KCP15 (5)
- KCP20S (2)
- KCP25 (15)
- KCP25B (14)
- KCP25C (15)
- KCP30 (11)
- KCP30B (3)
- KCP40B (5)
- KCPK05 (6)
- KCS10 (15)
- KCS10B (13)
- KCS25S (2)
- KCU10 (13)
- KCU10B (13)
- KCU25 (13)
- KCU25B (11)
- KD1400 (7)
- KD1405 (5)
- KD1425 (7)
- KN10S (2)
- KT315 (8)
- KT325 (7)
- KTP10 (7)
- KTP25S (7)
- KY1615 (6)
- PB250 (1)
- SP4019 (2)
- THM (11)
- THM-X (3)
- TN10P (7)
- TN10U (8)
- TN15M (7)
- TN15U (5)
- TN2000 (8)
- TN20K (8)
- TN20P (8)
- TN30M (7)
- TN4000 (5)
- TN6010 (2)
- TN6025 (2)
- TTR (1)
- WBH10P (7)
- WBH20P (3)
- WBH30P (7)
- WBK45U (1)
- WDN25U (7)
- WK15CT (8)
- WK20CT (13)
- WM15CT (7)
- WM25CT (8)
- WP15CT (13)
- WP20TT (2)
- WP25CT (11)
- WP35CT (10)
- WS10PT (3)
- WS25PT (2)
- WU05PT (3)
- WU10HT (10)
- WU10PT (8)
- WU25PT (8)
Hand Of Tool
Hand Of Tool
- L (3)
- N (3)
- R (4)
Wiper Insert
Wiper Insert
- N (15)
- Y (3)
F Dimension
F Dimension
- 0.0 mm(1)
- 5.0 mm(1)
- 6.0 mm(1)
- 45.0 mm(7)
to
F Dimension
F Dimension
- 0.0 in(1)
- 0.1969 in(1)
- 0.2362 in(1)
- 1.7717 in(7)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 90.0 mm(1)
- 110.0 mm(4)
- 215.0 mm(2)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.0 in(7)
- 3.5433 in(1)
- 4.3307 in(4)
- 8.465 in(2)
to
Cutting Direction
Cutting Direction
- B (9)
- S (1)
Rake Angle Style
Rake Angle Style
- NEUTRAL (ZERO) (10)
Maximum Bore Depth
Maximum Bore Depth
- 2.559 in(2)
- 2.5591 in(11)
to
Maximum Bore Depth
Maximum Bore Depth
- 65.0 mm(13)
to
Front-End
Clamp Style
Clamp Style
- D (11)
- S (6)
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (3)
- R-ROUND (9)
- V-DIAMOND/RHOMBIC 35 (5)
Maximum Cutting Depth
Maximum Cutting Depth
- 0.9843 in(1)
- 1.1024 in(1)
to
Maximum Cutting Depth
Maximum Cutting Depth
- 25.0 mm(1)
- 28.0 mm(1)
to
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (8)
- B L (8)
- C A (6)
- D P (7)
- H T (8)
- H W (15)
Back-End
Connection Type
Connection Type
- TAPER SHANK (10)
System Size
System Size
- PSC63 (10)
No filters matching ""
