successfully added to cart
View Cart

Notifications

Mark all as read

ISO Turning Inserts

WIDIA, an innovator of carbide cutting tools, offers high-performance turning inserts in different grades and geometries to machine a variety of workpiece materials like steel, stainless steel, cast iron, high-temp alloys and aluminum.

The VictoryTM portfolio offers a comprehensive range of ISO Turning Inserts with advanced substrates and coating technologies for high productivity, long tool life and reliability in rough to finish-turning applications. The WIDIA Victory Turning Inserts can be applied across a wide range of applications, providing long, consistent tool life with effective chip control and smooth surface finish at a strong cost performance ratio.

 

 

Multilayer coated inserts providing high-speed capability for finishing to roughing operations. Enhance chip control for better tool life and superior surface finishes.

  • Reduce cycle times — high speed and feed capability.
  • Long tool life — new multilayer coating provides better wear resistance.
  • Proven seating — smooth and secure seating surface.
  • Violet coating easily identifies flank wear.

Positive and Negative Insert Styles

  

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Select First Choice
  • CN (138)
  • DE (677)
  • GB (76)
  • IN (248)
  • SG (41)
  • US (246)
Applications
  • ID Thread Turning ID Thread Turning (16)
Workpiece Material
  • P Steel (1471)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1471)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1471)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (1471)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (1471)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (1471)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (1471)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (1471)
  • M Stainless Steel (595)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (595)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (595)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (595)
  • K Cast Iron (845)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (845)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (845)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (845)
  • N Non-Ferrous Materials (140)
    • N1
      Wrought Aluminum
      (138)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (138)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (1)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (139)
  • S High-Temp Alloys (703)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (702)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (702)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (702)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (378)
  • H Hardened Materials (1)
    • H1
      Hardened Materials 44-48 HRC
      (1)
    • H2
      Hardened Materials 48-55 HRC
      (1)
    • H3
      Hardened Materials 56-60 HRC
      (1)
    • H4
      Hardened Materials >60 HRC
      (1)
Cutting Condition
  • Heavily Interrupted Cut (599)
  • Lightly Interrupted Cut (1021)
  • Smooth Cut (1236)
  • Varying Depth of Cut (1092)
Cutting Condition Material
  • K-All (568)
  • M-All (472)
  • N-All (17)
  • P-All (979)
  • S-All (346)
Cutting Edges Per Insert
  • 0.0 (1)
  • 1.0 (46)
  • 2.0 (243)
  • 3.0 (134)
  • 4.0 (553)
  • 6.0 (336)
  • 8.0 (416)
to
Corner configuration
Corner Radius
  • 0.1 (7)
  • 0.102 (2)
  • 0.2 (31)
  • 0.397 (18)
  • 0.4 (366)
  • 0.6 (1)
  • 0.794 (7)
  • 0.8 (704)
  • 1.191 (8)
  • 1.2 (359)
  • 1.588 (6)
  • 1.6 (123)
  • 2.0 (1)
  • 2.381 (1)
  • 2.4 (32)
  • 3.0 (6)
  • 4.0 (11)
  • 4.7625 (1)
  • 5.0 (7)
  • 6.0 (8)
  • 6.35 (5)
  • 8.0 (8)
  • 9.525 (3)
  • 10.0 (7)
  • 12.5 (4)
  • 16.0 (2)
to
Corner Radius
  • 0.004 (9)
  • 0.0079 (2)
  • 0.008 (29)
  • 0.0156 (367)
  • 0.0157 (13)
  • 0.0158 (2)
  • 0.016 (2)
  • 0.0313 (680)
  • 0.0315 (31)
  • 0.0469 (361)
  • 0.047 (4)
  • 0.0472 (2)
  • 0.0625 (130)
  • 0.0787 (1)
  • 0.0938 (30)
  • 0.094 (2)
  • 0.0945 (1)
  • 0.1181 (6)
  • 0.1575 (11)
  • 0.1875 (1)
  • 0.1969 (7)
  • 0.2362 (8)
  • 0.25 (5)
  • 0.315 (8)
  • 0.375 (3)
  • 0.3937 (7)
  • 0.4922 (4)
  • 0.629 (1)
  • 0.6299 (1)
to
Corner Chamfer
  • 0.0 (1728)
to
Corner Chamfer
  • 0.0 (1728)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Drilling Condition
  • Heavily Interrupted Cut (599)
  • Lightly Interrupted Cut (1021)
  • Smooth Cut (1236)
  • Varying Depth of Cut (1092)
Drilling Condition Material
  • K-All (568)
  • M-All (472)
  • N-All (17)
  • P-All (979)
  • S-All (346)
Grade Of Cutting Tool
  • AT15S (1)
  • CW2015 (1)
  • PB250 (2)
  • PD100 (3)
  • THM (84)
  • THM X (1)
  • THM-F (2)
  • THM-X (17)
  • THMF-X (9)
  • TN10U (8)
  • TN15U (2)
  • TN2000 (46)
  • TN20K (6)
  • TN4000 (39)
  • TN6010 (10)
  • TN6025 (3)
  • TN6540 (1)
  • TN7525 (1)
  • TN7535 (1)
  • TTM08 (3)
  • TTM09 (5)
  • TTMS (1)
  • TTR (22)
  • TTR-X (3)
  • TTS (14)
  • W00342 (10)
  • WK05CT (43)
  • WK15CT (45)
  • WK20CT (188)
  • WM15CT (60)
  • WM25CT (199)
  • WM35CT (44)
  • WP05CT (4)
  • WP15CT (226)
  • WP20TT (4)
  • WP25CT (233)
  • WP35CM (1)
  • WP35CT (104)
  • WS10PT (121)
  • WS25PT (79)
  • WU10HT (45)
  • WU10PT (16)
  • WU25PT (22)
Wiper Insert
  • N (1711)
  • Y (17)
Front-End
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (510)
  • D-DIAMOND/RHOMBIC 55 (293)
  • L-RECTANGLE 90 (8)
  • R-ROUND (55)
  • S-SQUARE 90 (275)
  • T-TRIANGLE 60 (319)
  • V-DIAMOND/RHOMBIC 35 (117)
  • W-TRIGON 80 (152)
Insert Geometry
Shape
  • C-DIAMOND/RHOMBIC 80 (510)
  • D-DIAMOND/RHOMBIC 55 (293)
  • L-RECTANGLE 90 (8)
  • R-ROUND (55)
  • S-SQUARE 90 (275)
  • T-TRIANGLE 60 (319)
  • V-DIAMOND/RHOMBIC 35 (117)
  • W-TRIGON 80 (152)
Insert IC Size
  • 0.2362 (6)
  • 0.25 (101)
  • 0.281 (8)
  • 0.3125 (2)
  • 0.315 (4)
  • 0.375 (537)
  • 0.3937 (7)
  • 0.4724 (8)
  • 0.5 (761)
  • 0.625 (110)
  • 0.6299 (8)
  • 0.75 (134)
  • 0.7874 (7)
  • 0.9844 (4)
  • 1.0 (21)
  • 1.258 (1)
  • 1.2598 (1)
to
Insert IC Size
  • 6.0 (6)
  • 6.35 (101)
  • 7.14 (8)
  • 7.938 (2)
  • 8.0 (4)
  • 9.52 (10)
  • 9.525 (527)
  • 10.0 (7)
  • 12.0 (8)
  • 12.7 (761)
  • 15.875 (110)
  • 16.0 (8)
  • 19.05 (134)
  • 20.0 (7)
  • 25.0 (4)
  • 25.4 (21)
  • 32.0 (2)
to
Cutting Edge Length
  • 0.2359 (3)
  • 0.2539 (39)
  • 0.2565 (40)
  • 0.3052 (15)
  • 0.3173 (2)
  • 0.342 (112)
  • 0.375 (37)
  • 0.3808 (100)
  • 0.433 (4)
  • 0.4331 (35)
  • 0.4359 (5)
  • 0.4577 (10)
  • 0.4578 (77)
  • 0.458 (5)
  • 0.49 (8)
  • 0.5 (129)
  • 0.5077 (229)
  • 0.508 (3)
  • 0.6104 (184)
  • 0.6195 (3)
  • 0.625 (37)
  • 0.6346 (56)
  • 0.6495 (25)
  • 0.6496 (143)
  • 0.65 (5)
  • 0.6538 (91)
  • 0.75 (58)
  • 0.7616 (75)
  • 0.763 (2)
  • 0.866 (14)
  • 0.8661 (69)
  • 0.8666 (3)
  • 0.8717 (13)
  • 1.0 (18)
  • 1.0154 (3)
  • 1.0825 (15)
  • 1.1811 (3)
  • 1.2992 (2)
  • 1.5748 (1)
to
Cutting Edge Length
  • 6.448 (36)
  • 6.45 (6)
  • 6.515 (40)
  • 7.75 (1)
  • 7.752 (14)
  • 8.06 (2)
  • 8.687 (105)
  • 8.69 (7)
  • 9.525 (37)
  • 9.672 (100)
  • 10.999 (4)
  • 11.0 (35)
  • 11.071 (5)
  • 11.625 (1)
  • 11.628 (76)
  • 11.63 (15)
  • 12.45 (8)
  • 12.7 (129)
  • 12.896 (211)
  • 12.9 (21)
  • 15.504 (184)
  • 15.875 (37)
  • 16.12 (56)
  • 16.498 (28)
  • 16.5 (148)
  • 16.606 (91)
  • 19.05 (58)
  • 19.344 (75)
  • 19.38 (2)
  • 21.997 (11)
  • 22.0 (75)
  • 22.142 (13)
  • 25.4 (18)
  • 25.792 (3)
  • 27.496 (15)
  • 30.0 (3)
  • 33.0 (2)
  • 40.0 (1)
to
Chip Breaker CBMD
  • 04 (4)
  • 13 (2)
  • 16 (1)
  • 18 (1)
  • 1P (2)
  • 22 (4)
  • 41 (1)
  • 43 (4)
  • 5 (16)
  • 65 (50)
  • 8 (12)
  • B (12)
  • CT (1)
  • EN95 (1)
  • FF (39)
  • FP (101)
  • FS (47)
  • FW (6)
  • ML (66)
  • MP (74)
  • MR (84)
  • MS (87)
  • MU (110)
  • MW (11)
  • RH (152)
  • RU (42)
  • SR (15)
  • T (4)
  • UF (51)
  • UM (60)
  • UR (218)
Cutting Tool Material
  • B L (2)
  • C A (1)
  • C N (6)
  • D P (3)
  • H T (4)
  • H W (1709)
Tolerance Class
  • G (75)
  • M (1582)
  • U (71)
other
Grade
  • AT15S (1)
  • CW2015 (1)
  • PB250 (2)
  • PD100 (3)
  • THM (90)
  • THM X (1)
  • THM-F (2)
  • THM-X (11)
  • THMF-X (9)
  • TN10U (8)
  • TN15U (2)
  • TN2000 (46)
  • TN20K (6)
  • TN4000 (39)
  • TN6010 (10)
  • TN6025 (3)
  • TN6540 (1)
  • TN7525 (1)
  • TN7535 (1)
  • TTM08 (3)
  • TTM09 (5)
  • TTMS (1)
  • TTR (22)
  • TTR-X (3)
  • TTS (14)
  • W00342 (10)
  • WK05CT (43)
  • WK15CT (45)
  • WK20CT (188)
  • WM15CT (60)
  • WM25CT (199)
  • WM35CT (44)
  • WP05CT (4)
  • WP15CT (226)
  • WP20TT (4)
  • WP25CT (233)
  • WP35CM (1)
  • WP35CT (104)
  • WS10PT (121)
  • WS25PT (79)
  • WU10HT (45)
  • WU10PT (16)
  • WU25PT (22)
Platform
  • C Style Inserts (473)
  • CNMA (2)
  • CNMG (14)
  • D Style Inserts (279)
  • LNUX (8)
  • M100 Series (4)
  • R Style Inserts (50)
  • RCMT (1)
  • S Style Inserts (267)
  • SNMG (1)
  • SPMT (1)
  • T Style Inserts (300)
  • TNMG (12)
  • TPG (3)
  • V Style Inserts (112)
  • VNMA (2)
  • VariTurn (10)
  • W Style Inserts (134)
  • WNMG (14)
Tool Unit
  • I (1682)
  • M (1682)
Insert Hand
  • N (1725)
  • R (3)
No filters matching ""
product-image
Please adjust the following properties from

ISO Catalog Number

ANSI Catalog Number

to find similar products.
If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
You are about to create a duplicate . Do you want to proceed?
You are about to delete Do you want to proceed?
What would you like to rename your to?
Please enter a valid name
Please enter a name for the duplicate
Please enter a valid name
You are about to add to your My Solutions page. Do you want to proceed?
Please enter a valid name
Send a copy of

Please enter a valid Email
Please enter a valid name

We have found the following CAD Drawings

Select the files you are looking for and download them all at once

You should be logged to see your dashboard information
The product/s () you were trying to add to the cart is/are not available, please contact customer service.
item(s) successfully added to the cart
View Cart